OKP4819ADisney Marvel Spider Bot Shirt Crawler

A B A B HOW TO WEAR Package Contents: 1 x Spider-Bot 1 x Controller 1 x Base 1 x Micro USB cable 1 x User Manual USER MANUAL HOW TO PLAY ©Disney ©Marvel MADE IN CHINA www.Disney.com Distributed by Disney Theme Park Merchandise Lake Buena Vista, FL 32830 FAC-082040-23213 Required: 3 x 1.5V “LR44 / AG13” Button Cell Batteries (included) CONTROL Control Distance: Approximately 5m / 16.4 ft Note: Controls may work differently while worn vs. flat surface. For Lithium-ion Batteries: • Charge battery in isolated area. • Never charge battery unattended. • Always keep battery away from flammable materials. • Do not expose to direct sunlight. • There is a risk of the battery exploding, punctured, damaged, overheating, igniting or misused. • Do not disassemble, modify, short circuit or heat the battery. • Do not place them in fires or leave them in hot places. • Do not drop or subject to strong impacts. • Only use the specified Rechargeable Battery in the device and USB Charging Cable provided. The Rechargeable Battery is only to be charged or replaced by adults. The Rechargeable Battery must only be used with the included USB Charging Cable. Parts to be cleaned are to be disconnected from the USB Charging Cable before cleaning. This product is intended for indoor used only. The product is not recommended for use on loose dirt or wet surfaces. • Do not allow the Rechargeable Battery or charging contacts to get wet. • Carefully read the instruction guide, and use the Rechargeable Battery correctly. • In the unlikely event of leakage or explosion, use sand or a chemical fire extinguisher for the battery. • Battery must be recycled or disposed of properly. • Battery should be recycled or disposed of as per state and local guidelines. • Keep small cells and batteries which are considered swallowable out of the reach of children. • Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 h of ingestion. • In case of ingestion of a cell or battery, seek medical assistance promptly. WARNING! Do not immerse in water. Immersing Spider-Bot can result in electric shock. Burn hazard, fire hazard, and explosion hazard associated with mishandling of the battery. To avoid possible hazards, do not crush, disassemble, or dispose of in fire. An adult should periodically check this toy to ensure no damage or hazards exist; if so, remove from use. LED Power Micro USB DC IN 5V 0.5A 2 1 CHARGED CHARGING 3 4 CHARGINGFor Lithium-ion Batteries: Recharging Spider-Bot: 1. Switch power off. 2. Plug the Micro USB Cable into the Micro USB port on Spider-Bot and connect to a power source as indicated in the diagram. 3. Charging is indicated by a red light. 4. When fully charged, the light on Spider-Bot will turn off. * Spider-Bot is operated by 1 x 3.7V 150 mAh Lithium-ion rechargeable + - 3 x 1.5V “LR44 / AG13” Button Cell Batteries (included) Battery Diagram / InstallationRechargeable Li-ion Battery Model: HW651723P 1ICP8/15/23 Voltage: 3.7V 0.555Wh Capacity: 150mAh Date Code: Aug 2023 Red Wire (+), Black Wire (-) Hangzhou Wei Hong Energy Technology Co., Ltd. BATTERY REPLACEMENT 1. Remove the screw to access the battery compartment. 2. Open battery door. 3. Exhausted batteries are to be removed. 4. New batteries are to be inserted with correct polarity. 5. Replace the battery door and secure with screw. BATTERY INSTRUCTIONS • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon zinc), or rechargable (nickel- cadmium) batteries. • Non-rechargable batteries are not to be recharged. • The supply terminals are not to be short circuited. • Do not use rechargable batteries. • Remove batteries when not in use or discharged. Installing or changing batteries in Control: Lay Control down so that the battery compartment faces upwards. Control requires 3x1.5V “LR44/AG13” Button Cell Batteries (included). WARNING! This product is not suitable for children under 3 years because of small parts - choking hazard. CAN ICES-003(B)/NMB-003(B) MADE IN CHINA CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or experienced radio/TV technician for help This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. For these purposes, the party responsible is: WowWee USA Inc. 5845 Camino de la Costa, La Jol…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name WowWee Group Limited Address Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Grantee Code OKP FCC ID OKP4819A Authorized Contact Name Dennis Tsoi Contact Email [email protected] Contact Phone 852-2722-2767 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [WowWee Group Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [WowWee Group Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023/08/14 Print Name: Dennis Tsoi Title: Quality Assurance Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: August 14, 2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: WowWee Group Limited Company Name: WowWee USA Inc. Grantee Code: OKP FRN: 0033912247 Contact Name: Peter Yanofsky Contact Name: Dennis Tsoi Address: Address: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong 5845 Camino de la Costa La Jolla CA 92037 Telephone: Telephone: 852-2722-2767 401-524-6950 Email: Email: [email protected] [email protected] Applicable Equipment: FCC ID: OKP4819A ATTN: Director of Certification: We, < WowWee Group Limited > and WowWee USA Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < WowWee Group Limited > and WowWee USA Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Dennis Tsoi Name (Printed): Peter Yanofsky Title: Quality Assurance Manager Title: President Signature: Signature: Peter Yanofsky

WowWee Group Limited Date:2023/08/14 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: OKP4819A To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with WowWee Group Limited. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Dennis Tsoi Title: Quality Assurance Manager On behalf of Company: WowWee Group Limited Telephone: 852-2722-2767 E-mail: [email protected]

WowWee Group Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: OKP4819A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Dennis Tsoi Title: Quality Assurance Manager On behalf of Company: WowWee Group Limited Telephone: 852-2722-2767 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2308002530AT FCC ID: OKP4819A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

28 June 2023 #4819 Disney Spider Bot - Legal Lines • BODY legal lines • Output Elements in “FOR OUTPUT” Layer in file • Scale 1:1 NOTES: • Page 1 of 1 = Emboss [On Mold] = Print [Sliver - PMS 877C] = Follow color spec. KEY: Product: BOTTOM #4817 REMY Product: Recess 1.0mm Insert PUCK: BACK © Disney © MARVEL © 2023 WOWWEE CHINA Recess 1.0mm PUCK: FRONT 4819 FCC ID: OKP4819A IC: 7091A-4819A FAC-082040-23213 © D i s n e y © M A R V E L © 2 0 2 3 W O W W E E C H I N A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Internal Photos for SZCR2308002530AT FCC ID: OKP4819A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 1 of 11 Keny Xu EMC Laboratory Manager 1 Cover Page RF Exposure Report Application No.: SZCR2308002530AT Applicant: WowWee Group Limited Address of Applicant: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Manufacturer: WowWee Group Limited Address of Manufacturer: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Factory: Zhongshan Oszekei Electronic Metal Plastic Co., Ltd Address of Factory: Shenwan Town Industrial Zone, Zhongshan City, Guangdong, China Equipment Under Test (EUT): EUT Name: Disney Marvel Spider Bot Shirt Crawler Model No.: 4819 Trade Mark: WowWee FCC ID: OKP4819A Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-08-04 Date of Test: 2023-08-12 to 2023-08-14 Date of Issue: 2023-08-21 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-08-21 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 3 of 11 2 Contents Page 1 Cover Page .................................................................................................................................. 1 2 Contents ...................................................................................................................................... 3 3 General Information..................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................ 4 3.2 Details of E.U.T. .................................................................................................................... 4 3.3 Separation Distance .............................................................................................................. 5 3.4 Test Location ........................................................................................................................ 6 3.5 Test Facility ........................................................................................................................... 6 4 FCC Radiofrequency radiation exposure limits ......................................................................... 7 4.1 Blanket 1 mW Blanket Exemption .......................................................................................... 7 4.2 MPE-based Exemption .......................................................................................................... 7 4.3 SAR-based Exemption .......................................................................................................... 8 5 Measurement and Calculation .................................................................................................. 11 5.1 Maximum transmit power .................................................................................................... 11 5.2 RF Exposure Calculation ..................................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Lithium Ion Battery: DC 3.7V 150mAh 0.555Wh rechargeable battery Frequency Range 2430MHz to 2453MHz Number of Channels: 24 Channel Spacing: 1MHz Modulation Type: GFSK Antenna Type: PCB Antenna Gain: -0.58dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 5 of 11 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253002 Page: 6 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC St…

Text truncated - open the document above for the full version.

2410MHz 2440MHz2478MHz2410MHz2440MHz 2478MHz MAX. Gain -0.58dBi Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm 2478 -0.585582 -22.0315 -6.59127 247 8 MHz 2440 -0.765802 -36.5604 -7.48023 2440 MHz Gain(dBi) 241111 0 MHz 2410 -1.26174 -30.0801 -7.18716 Horizontal: Power (dBm) Max: 0 Min: -40 Scale: 5/div Frequency (MHz) Max Min Avg 2478 -1.86120 -29.5214 -9.20432 247 8 MHz 2440 -2.4652 -24.5837 -10.4702 2440 MHz Gain(dBi) 2410 -5.2537 -22.1424 -12.4294 241 0 MHz Vertical: Power (dBm) Max: 0 Min: -30 Scale: 5/div Frequency (MHz) Max Min Avg ANT Test Labs：Attestation of Global Compliance Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253001 Page: 1 of 46 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2308002530AT Applicant: WowWee Group Limited Address of Applicant: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Manufacturer: WowWee Group Limited Address of Manufacturer: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Factory: Zhongshan Oszekei Electronic Metal Plastic Co., Ltd Address of Factory: Shenwan Town Industrial Zone, Zhongshan City, Guangdong, China Equipment Under Test (EUT): EUT Name: Disney Marvel Spider Bot Shirt Crawler Model No.: 4819 Trade Mark: WowWee FCC ID: OKP4819A Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2023-08-04 Date of Test: 2023-08-12 to 2023-08-14 Date of Issue: 2023-08-21 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253001 Page: 2 of 46 Revision Record Version Chapter Date Modifier Remark 01 2023-08-21 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253001 Page: 3 of 46 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800253001 Page: 4 of 46 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 7 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 8 4.7 Abnormalities from Standard Conditions ....................................................................................... 8 5 Equipment List ................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ..........................................................................................12 6.1 Antenna Requirement .................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 6.1.2 Conclusion ..............................................................................................................................12 7 Radio Spectrum Matter Test Results ................................................................................................13 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ..........................................................13 7.1.1 E.U.T. Operation .....................................................................................................................13 7.1.2 Test Mode Description ............................................................................................................13 7.1.3 Test Setup Diagram ................................................................................................................14 7.1.4 Measurement Procedure and Data .........................................................................................14 7.2 20dB Bandwidth ..........................................................................................................................17 7.2.1 E.U.T. Operation .....................................................................................................................17 7.2.2 Test Mode De…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2308002530AT FCC ID: OKP4819A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Emissions Above 1GHz - End of the Appendix -