OKUCAB4365Emerson Bluetooth Speaker

EMERSON BLUETOOTH SPEAKER Model:EBT1100 1 Safety Instructions -The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. -Read these instructions. -Keep these instructions. -Heed all warnings. -Follow all instructions. -Do not use this apparatus near water. -Clean only with a slightly damp cloth. -Do not block any ventilation openings. -Install in accordance with the manufacturer’s instructions. -Do not install or operate near any heat sources such as radiators, stoves, or other apparatus that produce heat. -Unplug this apparatus during lighting storms or when unused for long periods of time. -Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Warning -:To reduce the risk of ire or electrical shock, do not expose this product to rain or moisture. -The product must not be exposed to dripping and splashing and no object filled with liquids such as a vase of lowers should be placed on the product. -No naked lame sources such as candles should be placed on the product. -Batteries (a battery pack or installed batteries) shall not be subject to excessive heat such as sunshine, ire or the like. Caution: -Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. Caution: -Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure. 2 FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3 Product Overview 1 Built-in microphone 6 Bluetooth/Battery indicator 2 Volume up button 7 Previous Button 3 Next button 8 USB charging port 4 Play/Pause/Standby button 9 AUX IN jack 5 Volume down button 4 Charge Battery The device is operated via the integrated lithium battery. Charge the battery as followings: 1.Plug the micro B USB plug of the charging cable into the jack of the device. Connect the USB plug to a powered-on computer. The indicator lights up red and the battery begin to charge. 2.If the battery is completely charged, the indicator red light turns off. 3.Remove the charging cable from the Speaker and PC. Note: - In Bluetooth mode, the Speaker will send an alarm sound when the battery is nearly exhausted. Battery Caution --The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. -Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. -Please refer to the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. Use You have two ways to use the device: By cable or cordless via Bluetooth. By cable 1. Connect the 3.5 mm stereo cable to an external audio source. 2. Insert the other end of the cable into the AUX IN Jack on the Speaker. 3. Turn on the Speaker by holding the Standby button. 4. Set the volume of the external audio source to an audible volume. 5. Adjust the volume with the Volume +/- buttons on the device. Cordless via Bluetooth If an audio cable is connected to the AUX IN jack, A connection via Bluetooth Is not possible. Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed. - Logging on devices (Pairing) Before you listen to music via the unit, you must pair the devices. 1. Ensure that the Bluetooth function is activated in your player (e.g. mobile phone). For this, refer to the operation manual of your player. 2. Turn on the Speaker by holding the Standby button. The Bluetooth indicator will start to flash rapidly after a short time.The Device Is now set to the pairing mode. 3. Chose the Bluetooth menu in your player and register the device in your player. For 5 For this, refer to the operation manual of your player. The Device “EBT1100” will show in your player as a selection. 4. If the playback de…

Text truncated - open the document above for the full version.

Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy) 04/17/2013 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Shenzhen Junlan Electronic Ltd (address: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China), hereby authorize Hans.hu (Company name: Global United Technology Services Co., Ltd. Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong ) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 04/17/2014 Yours sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Shenzhen Junlan Electronic Ltd Date (dd/mm/yyyy) 04/17/2013 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: OKUCAB4365 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Shenzhen Junlan Electronic Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: safety engineer / Peng Xiao Telephone Number: 0755-27309169 Email: [email protected]

Differences Declaration To whom concern, We Shenzhen Junlan Electronic Ltd hereby declares: The product model(s) CAB-4365 are identical in the same PCB layout, interior structure and electrical circuits with the model EBT1100 which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Authorized signature: Date: 2013-04-17

Size: 50mm*60mm

Label location

EUT RF Exposure The max EIRP is 0.0885mW in the middle channel (2.441GHz); SAR limit=10mW So the SAR report is not required.

Global United Technology Services Co., Ltd. Report No.: GTSE13040040801 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: Shenzhen Junlan Electronic Ltd Address of Applicant: District 2 type A plant in the second layer 1-4, NO.2 Industrial Fuyuan Tangwei Fuyong Baoan Shenzhen China Equipment Under Test (EUT) Product Name: EMERSON BLUETOOTH SPEAKER Model No.: EBT1100, CAB-4365 Trade Mark: EMERSON FCC ID: OKUCAB4365 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2012 Date of sample receipt: April 08, 2013 Date of Test: April 08-16, 2013 Date of report issued: April 17, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13040040801 Global United Technology Services Co., Ltd. Project No.: GTSE130400408RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 29 2 Version Version No. Date Description 00 April 17, 2013 Original Prepared By: Date: April 17, 2013 Project Engineer Check By: Date: April 17, 2013 Reviewer Report No.: GTSE13040040801 Global United Technology Services Co., Ltd. Project No.: GTSE130400408RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 29 3 Contents Page 1 COVER PAGE............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS....................................................................................................... 7 5.5 TEST FACILITY.................................................................................................................................... 7 5.6 TEST LOCATION................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA...................................................................................... 9 7.1 ANTENNA REQUIREMENT:.................................................................................................................... 9 7.2 CONDUCTED EMISSIONS................................................................................................................... 10 7.3 RADIATED EMISSION METHOD........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious emissions.................................................................................................................... 16 7.3.3 Bandedge emissions.................................................................................................................. 20 7.4 20DB OCCUPY BANDWIDTH.............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS ...........................................................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission