OL3300400Mobile DECT Handset

1 Alcatel-Lucent 400 DECT Handset Alcatel-Lucent 300 DECT Handset Your telephone 2 Telephone (1) if the system allows this 123 MARTIN Paul Wed 24 May 16:30 Headset ATIMU000-008 „Status icons Battery charge level: Ringer active Message(s) waiting (flashing) Ringer deactivated Programmed callback time Radio reception quality: Call forwarding activatedVibrator active „Call icons Making a call Answering a call In conversation Call on hold Access the directory feature Transferring a call Switching to DTMF signals Setting up a conference Place a call on hold Parking an external communication (1) Additional options (1) „Switch the screen on again „Erase a character „Return to previous menu „Delete an entire field (long press) „Switch on / off (long press) „Rapid access to ringer adjustment „Hang up „Return to first screen „Switch off ringer „Lock/unlock keypad (long press) „Company directory „Customizing your telephone (1) / Telephone ID (1) (long press) 3BN60370USAAed01.fm Page 2 Jeudi, 14. juin 2007 4:38 16 3 Telephone / Microphone English (US) Light •Green steady: handset charging •Green fast flashing: outside the radio field •Red slow flashing: message present „Adjust audio volume „Access MENU „Confirm „Display next selection of a list (up, down, left, right) Headset jack (400 DECT) Back-lit screen (in colour for the 400 DECT) The screen switches off automatically after a few seconds of inactivity. To turn it back on, press the key C 1 2 1 OK „Lift the receiver „Redial (long press) „Broker call (during consultation call) „Activate/deactivate loudspeaker (400 DECT) „Activate/Deactivate the vibrating ringer (long press) 3BN60370USAAed01.fm Page 3 Jeudi, 14. juin 2007 4:38 16 4 Using your telephone 4 1 Other Access MENU For the description of the other menu icons, please refer to your phone set manual. Making a call Answering a call All features described here below can be accessed by a long press on specific keys It provides access to all the features available on your system. Directories: manage your personal directory and access the company directory. Redial: auto call back Forward: forward your calls to another number. Mailbox: consult and send voice and text messages. Appointment: program a callback time. System lock: prohibit outgoing calls and modification of the programming. Adjustment: adjust the basic features of your telephone (preferences) Language: selecting language (if the system allows this). Dial the number required Send the callSpeakHang up To make an external call, dial the outside line access code (9) before dialing your party's number. 123 John inconversation You are answering a callLift the receiverSpeakHang up Disabling the ringer: Press the hang up key when your telephone rings: it is still possible to answer by pressing the unhook key. 123 Sophie iscalling 123 Sophie inconversation ATIGR010-020 ATIMU030-010 3BN60370USAAed01.fm Page 4 Jeudi, 14. juin 2007 4:38 16 5 Using your telephone 1 5 Calling your party by name (company directory) Redial Access your personal directory. Select the Directory feature Select the party you wish to callSend the call Refer to the user manual of your telephone to program an entry in the personal directory. Quick access (if the system allows this) : 123 123 1-JOHN 2-PAUL 3- follow informations displayed on the screen Enter the first letters of the last name Confirm if the name of the person you are calling is not displayed Select the name from the displayed list Send the call 123 Paul RedialSelect a name or a number Send the call Quick access (if the system allows this) : long press. 123 ATIMU030-040 ATIMU030-020 ATIMU030-030 3BN60370USAAed01.fm Page 5 Jeudi, 14. juin 2007 4:38 16 To call your personal directory (Individual number) 6 During a call 6 2 Other Making a second call Answering a second call You are on call and a party is trying to contact you: Switching between two calls (Broker call) During a call, to recover the party on hold: You are on a call with the destination number The first call is placed on holdCalling a second person during a call Send the call You can also call a second party by selecting the icon or 2nd call text, or else by using your personal directory or the company directory. 123 Paul inconversation The caller’s name is displayed for 3 seconds, and a beep is sent Lift the receiverThe first call is placed on hold Over 3 seconds, move with the navigate-left-right key to the receiving a second call icon, to see the identity of the second caller (and off-hook if necessary) 123 Paul iscalling 123 Paul inconversation Switching between two calls (Broker call)- Single-line terminal only. your telephone rings Hang up the ongoing call Press the line key with icon to recover the call on hold 123 Paul inconversation 123 John inconversation OROR ATIGR030-050 ATIMU040-010 ATIMU040-020 ATIMU040-030 3BN60370USAAed01.fm Page 6 Jeudi, 14. juin 2007 4:38 16 7 During a call 2 7 Transferring a call After dialing the destination number, you can transfer the call directly without waiting for your party's reply by validating the 'Transfer' option.You can initiate the transfer by using the icon or the 'Transfer' text.The transfer between two external parties and the transfer by pressing the hang-up key depend on the system configuration. Three-way conference with internal and/or external parties (conference) During a call, a second call is on hold. To cancel the conference, press the OK key. This will put you back to the other party. You are on callSelect the 'transfer' function Select 'transfer' Calling a second person Select the 'transfer' function Select 'transfer' You can also transfer your call immediately, without waiting for your party to answer. 123 Paul inconversation Select the 'conference' feature Number of second party Select the 'conference' feature 123 Paul inconversation ATIMU040-040 ATIMU040-050 ATIMU060-005 3BN60370USAAed01.fm Page 7 Jeudi, 14. juin 2007 4:38 16 8 Forward your calls to another number 8 3 Other Formardin…

Text truncated - open the document above for the full version.

TRL 51F047 iss02B LETTER OF AGENCY Date April 13 th 2007 TRL Compliance Ltd Long Green Forthampton Gloucester GL19 4QH UK To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Thank you for your attention to these matters. Yours faithfully Alcatel Business Systems Signature Full Name Rainier BALTZ

TRL 51F050 iss02B REQUEST FOR CONFIDENTIALITY I N ACCORDANCE WITH FCC RULE 0.459 Date April 13 th 2007 TRL Compliance Ltd Long Green Forthampton Gloucester GL19 4QH UK RE: Certification Application FCC ID: OL3300400 To Whom It May Concern: Please be advised that the following information is to be held confidential on behalf of Alcatel-Lucent. • Schematics and parts list • Board layout information • Technical Description The application contains technical information which Alcatel-Lucent deems to be trade secrets and propriety. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Yours faithfully Alcatel Business Systems Signature Full Name Rainier BALTZ

MR300 FRONT OVERVIEW MR300 REAR OVERVIEW MR300 BATTERY REMOVED MR300 CASE INTERNAL VIEW PCB REMOVED MR300 INTERNAL VIEW PCB MOUNTED MR300 PCB KEYPAD SIDE MR300 PCB KEYPAD SIDE LCD MOVED MR300 PCB KEYPAD SIDE KEY COVER REMOVED MR300 ASSEMBLED PCB RF SIDE MR300 PCB RF SIDE CANS REMOVED MR300 ANTENNA

MR400 FRONT OVERVIEW MR400 REAR OVERVIEW MR400 BATTERY REMOVED MR400 CASE INTERNAL VIEW PCB REMOVED MR400 INTERNAL VIEW PCB MOUNTED MR400 PCB KEYPAD SIDE MR400 PCB KEYPAD SIDE LCD MOVED MR400 PCB KEYPAD SIDE KEY COVER REMOVED MR400 ASSEMBLED PCB RF SIDE MR400 PCB RF SIDE CANS REMOVED MR400 ANTENNA

R.Baltz Labels 300 & 400 DECT Handsets 15.05.2007 1. Status existing labels 2. Proposal with amendments Product labelling & Packed labelling 300 DECT Handset Made in China Complies with Part 68, FCC Rules This device complies with Part 15 of the FCC rules and RS S-213 of Industry Canada. Operation is subject to the following two condition : [1] This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Utiliser seulement un chargeur basic ALCATEL (3BN78318AA) ou un chargeur dual ALCATEL (3BN78319AA) Use only with ALCATEL basic charger (3BN78318AA) or ALCATEL dual charger (3BN78319AA) FCC ID: OL3300400 IC: 1737D-300400 2.1 Removal: CCC logo removed : not launched in China 2.2 Modifications: ƒ Alcatel Logo replaced by Alcatel-Lucent Logo ƒ Names: 300 DECT Handset / 400 DECT Handset ƒ Add FCC ID ƒ Add IC No ƒ Australia A-Tick: No CAN No required because Trade name available on Label 2.3 Notes ƒ The CSA number underthe Logo must be the number given by KTL for CSA Safety approval ƒ The Telepermit Number only available after NZ approval (if not available remove logo until No available) ƒ Europe: CE+WEEE OK ƒ China : CCC (S&E) OK ƒ Australia: A-Tick+ACN No OK ƒ ƒ NZ: - Le Logo Telepermit OK - le No est à venir (PTC....) ƒ US et Canada : - Logo CSA (C/US) OK - le No sous ce Logo est à venir - Logos : FCC et HAC : OK - Il faut rajouter les Nos d’agrément US et Canada : FCC ID : OL3MR300 IC: 1737D-MR300 (pour MR300) FCC ID : OL3MR400 IC: 1737D-MR400 (pour MR400) - Phrase “This device complies with Part 15 of the FCC rules and RSS-213 of Industry of Canada....” ƒ Japan: Supprimer (pas de DECT au Japon; seul PHS) ƒ Brazil - Ajouter Logo Anatel "Anatel logo.tif" - No d’agrément à venir -

BRADYBONDZ(TM) B-423 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK TDS No. B-423 Effective Date: 26- 九月 -2006 Description: GENERAL Print Technology: Thermal transfer Materials Type: White polyester Finish: Glossy white Adhesive: Permanent acrylic APPLICATIONS Electronic PCB and component identification, bar code label and rating plates. RECOMMENDED RIBBONS Brady series R6000 Brady series R4400 (colors - red, blue, green, white) Brady series R4900 and R6200 (alternates) REGULATORY/AGENCY APPROVALS UL: B-423 is a UL Recognized Component to UL969 Labeling and Marking Standard when printed with Brady Series R6000 ribbon. See UL file MH17154 for specific details. UL information can be accessed on line at UL.com. Search in Certifications area. The Brady Series R4900 ribbon is also UL approved. CSA: B-423 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R6000 ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-international.org. DIN VDE 0472 Part 815: Brady B-423 meets requirements of a halogen-free material per DIN VDE 0472 part 815. (Statement based on review of product construction and confirmation halogen content test run at an independent test laboratory.) Brady B-423 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. Details: PHYSICAL PROPERTIESTEST METHODS AVERAGE RESULTS Thickness ASTM D 1000 -Substrate -Adhesive -Total 0.002 inch (0.0508 mm) 0.001 inch (0.0254 mm) 0.003 inch (0.0762 mm) Adhesion to: ASTM D 1000 51 oz/inch (56 N/100 mm) -Stainless Steel - Painted Enamel - Textured ABS 20 minute dwell 24 hour dwell 20 minutes dwell 24 hour dwell 20 minutes dwell 24 hour dwell 78 oz/inch (85 N/100 mm) 54 oz/inch (59 N/100 mm) 67 oz/inch (73 N/100 mm) 10 oz/inch (11 N/100 mm) 15 oz/inch (17 N/100mm) Tack ASTM D 2979 Polyken™ Probe Tack 1 second dwell 21 oz (600 g) Dielectric Strength ASTM D 1000 8600 Volts B-423 is not recommended for low surface energy surfaces such as polyethylene and polypropylene. Performance properties tested on B-423 printed with Series R6000 and R6200 ribbons using the Bradyprinter™ THT Model 300X-Plus thermal transfer printer. Printed samples were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environments. Unless noted, results are the same for both ribbons. PERFORMANCE PROPERTIES TEST METHOD TYPICAL RESULTS High Service Temperature 30 days at various temperatures No visible effect to label at 110°C. Slight discoloration at 120°C; moderate discoloration at 145°C but label is still functional. Low Service Temperature 30 days at -70°C No visible effect Short Term High Service Temperature 5 minutes at various temperatures No visible effect to label at 180°C. Slight discoloration and label shrinkage at 200°C; label is functional. Label becomes nonfunctional at 210°C due to label shrinkage. Humidity Resistance 30 days at 100°F (37°C) and 95% relative humidity. No visible effect UV Light Resistance 30 days in UV Sunlighter™ 100 Slight discoloration Weatherability ASTM G26 30 days in Xenon Arc Weatherometer No visible effect Salt Fog Resistance ASTM B 117 30 days in 5% salt fog solution chamber No visible effect PERFORMANCE PROPERTY CHEMICAL RESISTANCE Samples were printed with Series R6000 and R6200 ribbons using a Bradyprinter™ 300X-Plus thermal transfer printer. Samples were laminated to aluminum panels and allowed to dwell 24 hours prior to testing. Testing was conducted at room temperature and consisted of 30 minute immersions in the specified test fluid. After immersion, the samples were removed from the test fluid and the printed image rubbed 10 times with a cotton swab saturated with the test fluid. The rating scale below shows the effect to the quality of the print for each sample. SUBJECTIVE OBSERVATION OF VISUAL CHANGE EFFECTS TO PRINTED IMAGE R6000 R6200 CHEMICAL REAGENT EFFECT TO LABEL STOCK WITHOUT RUB WITH RUB WITHOUT RUB WITH RUB Acetone Slight adhesive ooze 1 5 1 5 Toluene Slight adhesive ooze 1 5 1 5 Isopropyl Alcohol No visible effect 1 1 1 1 Mineral Spirits No visible effect 1 1 1 1 Gasoline Slight adhesive ooze 1 1 1 1 JP-8 Jet Fuel Slight adhesive ooze 1 1 1 1 Brake Fluid No visible effect 1 1-2 1 5 Skydrol® 500B-4 Slight adhesive ooze 1 5 2 5 SAE 20 WT Oil at 70°C No visible effect 1 1 1 1 MIL 5606 Oil No visible effect 1 1 1 1 Formula 409® Cleaner No visible effect 1 1 1 1 Northwoods™ Buzz Saw Citrus Degreaser No visible effect 1 1 1 1 Deionized Water No visible effect 1 1 1 1 Rating Scale: 1= no visible effect 2= slight smear or print removal, detectable but minimal smear 3= moderate smear or print removal (print still legible) 4= severe smear or print removal (print illegible or just barely legible) 5= complete print and/or topcoat removal NP= print removed prior to rub Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receiptfor this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications. Trademarks: BradyBondz™ is a trademark of Brady Worldwide, Inc. BradyPrinter™ is a trademark of Brady Worldwide, Inc. Formula 409® is a registered trademark of the Clorox Company Northwoods™ is a trademark of the Superior Chemical Corporation Polyken™ is a trademark of Testing Machines Inc. Skydrol® is a registered trademark of the Monsanto Company Sunlighter™ is a trademark of the Test Lab Apparatus Company ASTM: American Society for Testing and Materials (U.S.A.) CSA: Canadian Standards Association SAE: Society of Autom…

Text truncated - open the document above for the full version.

MR300 FRONT OVERVIEW MR300 REAR OVERVIEW MR300 BATTERY REMOVED MR300 CASE INTERNAL VIEW PCB REMOVED MR300 INTERNAL VIEW PCB MOUNTED MR300 PCB KEYPAD SIDE MR300 PCB KEYPAD SIDE LCD MOVED MR300 PCB KEYPAD SIDE KEY COVER REMOVED MR300 ASSEMBLED PCB RF SIDE MR300 PCB RF SIDE CANS REMOVED MR300 ANTENNA

MR400 FRONT OVERVIEW MR400 REAR OVERVIEW MR400 BATTERY REMOVED MR400 CASE INTERNAL VIEW PCB REMOVED MR400 INTERNAL VIEW PCB MOUNTED MR400 PCB KEYPAD SIDE MR400 PCB KEYPAD SIDE LCD MOVED MR400 PCB KEYPAD SIDE KEY COVER REMOVED MR400 ASSEMBLED PCB RF SIDE MR400 PCB RF SIDE CANS REMOVED MR400 ANTENNA

REPORT ON THE CERTIFICATION TESTING OF AN ALCATEL BUSINESS SYSTEMS MOBILE HANDSET WITH RESPECT TO FCC RULES CFR 47, PART 15D August 2006 INTENTIONAL RADIATOR SPECIFICATION TEST REPORT NO: RU1304/7506 COPY NO: 2 ISSUE NO: 1 FCC ID: OL3300400 REPORT ON THE CERTIFICATION TESTING OF AN ALCATEL BUSINESS SYSTEMS MOBILE HANDSET WITH RESPECT TO FCC RULES CFR 47, PART 15D August 2006 INTENTIONAL RADIATOR SPECIFICATION TEST DATE: 19 th February – 14 th March 2007 TESTED BY: D WINSTANLEY APPROVED BY: J CHARTERS RADIO SECTION LEADER DATE: 2 nd July 2007 Distribution: Copy Nos: 1. ALCATEL BUSINESS SYSTEMS 2. FCC EVALUATION LABORATORIES 3. TRL COMPLIANCE Ltd THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE RU1304/7506 Page 3 of 70 CONTENTS PAGE CERTIFICATE OF CONFORMITY & COMPLIANCE 5 APPLICANT’S SUMMARY 6 TESTS REQUIRED 7 EQUIPMENT TEST CONDITIONS 8 SYSTEM DESCRIPTION 8 TEST RESULTS 9 – 28 ANNEX PHOTOGRAPHS A PHOTOGRAPH No. 1: Radiated Test Setup PHOTOGRAPH No. 2: Powerline Conduction Test Setup PHOTOGRAPH No. 3: MR300 Front Overview PHOTOGRAPH No. 4: MR300 Rear Overview PHOTOGRAPH No. 4: MR300 Rear Overview, Cover & Battery Removed PHOTOGRAPH No. 6: MR400 Front Overview PHOTOGRAPH No. 7: MR400 Rear Overview PHOTOGRAPH No. 8: MR400 Rear Overview, Cover & Battery Removed PHOTOGRAPH No. 9: MR300 PCB Keypad Side & Keypads PHOTOGRAPH No. 10: MR400 PCB Keypad Side & Keypads PHOTOGRAPH No. 11: PCB RF Side PHOTOGRAPH No. 12: PCB RF Side Cans Removed PHOTOGRAPH No. 13: Antenna RU1304/7506 Page 4 of 70 CONTENTS Continued ANNEX APPLICANT’S SUBMISSION OF DOCUMENTATION LIST B AC POWERLINE CONDUCTION C EMISSION BANDWIDTH D PEAK TRANSMIT POWER E POWER SPECTRAL DENSITY F ACKNOWLEDGEMENTS G EMISSIONS OUTSIDE THE SUB-BAND - CONDUCTED H EMISSIONS INSIDE THE SUB-BAND - CONDUCTED I SPURIOUS EMISSIONS – RADIATED J FRAME PERIOD K EQUIPMENT DETAILS & CALIBRATION L MEASUREMENT UNCERTAINTY M Notes: 1. Component failure during test YES [ ] NO [X] 2. If Yes, details of failure: 3. The facilities used for the testing of the product contain in this report are FCC Listed. 4. The contents of the attached applicants declarations and other supplied information are not covered by the scope of this laboratory’s UKAS or FCC accreditations’ and is provided in good faith. RU1304/7506 FCC IDENTITY: OL3300400 PURPOSE OF TEST: Certification TEST SPECIFICATION: FCC RULES CFR 47, Part 15D August 2006 TEST RESULT: Compliant to Specification EQUIPMENT UNDER TEST: Mobile Handset MODEL(s) TESTED MR300 Conducted Sample MR300 Radiated Sample MR400 Radiated Sample EQUIPMENT TYPE: UPCS Transceiver PRODUCT USE: Personal communications CARRIER POWER: 18.61 dBm (Conducted) ANTENNA TYPE: Integral ALTERNATIVE ANTENNA: Not Applicable BAND OF OPERATION: 1920 MHz – 1930 MHz CHANNEL SPACING: 1.728 MHz NUMBER OF CHANNELS: 5 frequencies, 12 single time slots per frequency giving 60 channels FREQUENCY GENERATION: SAW Resonator [ ] Crystal [ ] Synthesiser [X] MODULATION METHOD: Amplitude [ ] Digital [X] Angle [ ] POWER SOURCE(s): +3.7Vdc TEST DATE(s): 19 th February – 14 th March 2007 ORDER No(s): Pro Forma Invoice APPLICANT: Alcatel Business Systems ADDRESS: 1 Route Du Dr Albert Schweitzer 67408 Illkirch Cedex France TESTED BY: D WINSTANLEY APPROVED BY: p.p. J CHARTERS RADIO SECTION LEADER CERTIFICATE OF CONFORMITY & COMPLIANCE RU1304/7506 Page 6 of 70 APPLICANT’S SUMMARY EQUIPMENT UNDER TEST (EUT): Mobile Handset EQUIPMENT TYPE: UPCS Transceiver PURPOSE OF TEST: Certification TEST SPECIFICATION(s): FCC RULES CFR 47, Part 15D August 2006 TEST RESULT: COMPLIANT Yes No [X] [ ] APPLICANT’S CATEGORY: MANUFACTURER IMPORTER DISTRIBUTOR TEST HOUSE AGENT [X] [ ] [ ] [ ] [ ] APPLICANT’S ORDER No(s): Pro Forma Invoice APPLICANT’S CONTACT PERSON(s): Mr Rainier Baltz E-mail address: [email protected] APPLICANT: Alcatel Business Systems ADDRESS: 1 Route Du Dr Albert Schweitzer 67408 Illkirch Cedex France TEL: +33 390 676790 FAX: +33 390 676541 TEST LABORATORY: TRL Compliance Ltd UKAS ACCREDITATION No: 0728 TEST DATE(s): 19 th February – 14 th March 2007 TEST REPORT No: RU1304/7506 RU1304/7506 Page 7 of 70 EQUIPMENT TEST / EXAMINATIONS REQUIRED 1. TEST/EXAMINATION RULE PART APPLICABILITY Coordination with Fixed Microwave Service 15.307 (b) No note 1 Cross reference to Subpart B 15.309 (b) Yes Labelling Requirements 15.311 15.19 (a)(3) Yes Measurement Procedures 15.313 Yes Antenna Requirement 15.317 15.203 Yes Modulation Techniques 15.319 (b) Yes Conducted AC Powerline 15.315 15.207 Yes Emission Bandwidth 15.323 (a) Yes Peak Transmit Power 15.319 (c) Yes Power Spectral Density 15.319 (d) Yes Antenna Gain 15.319 (e) Yes Automatic Discontinuation of Transmission 15.319 (f) Yes Radio Frequency Radiation Exposure 15.319 (i) Yes Monitoring Thresholds 15.323 (c)(2) 15.323 (c)(9) Yes Monitoring of Intended Transmit Window and Maximum Reaction Time 15.323 (c)(1) Yes Monitoring Bandwidth 15.323 (c)(7) Yes Access Criteria Functional Test 15.323 (c)(6) No Note 2 Duration of Transmission 15.323 (c)(3) Yes Connection Acknowledgement 15.323 (c)(4) Yes Lower threshold Selected Channel, Power Accuracy, Segment Occupancy 15.323 (c)(5) Yes Monitoring Antenna 15.323 (c)(8) Yes Duplex Connections 15.323 (c)(10) Yes Alternative Monitoring Interval for Co-located Devices 15.323 (c)(11) No Note 3 Fair Access to Spectrum Related to (c)(10) & (c)(11) 15.323 (c)(12) Yes Emission Inside and Outside the Sub-band 15.323 (d) Yes Frame Period 15.323 (e) Yes Frequency Stability 15.323 (f) Yes Note: 1. Requirement removed April 4 th 2005 see public notice DX 05-1005. 2. The EUT does not transmit control and signalling information. 3. Not utilized by this EUT as devices will not be co-located within 1m of each other. RU1304/7506 Page 8 of 70 2. Product Use: Personal Communications 3. Duty Cycle: 8.33% 4. Transmitter bit or pulse rate and level: 2Mbps 5. Temperatures: Ambient (Tnom) 22 o C 6. Supply Voltages: Vnom +3.7Vdc Note: Vnom voltages are as stated above unless otherw…

Text truncated - open the document above for the full version.

Open Area Test Site Close Up Of EUT On Open Area Test Site AC Powerline Conduction