OO4-ILR-IQ350RTActive UHF Tag Reader

ILR 350 Series Installation and Operation Manual for Tag i-Q350 RTLS Installation and Operation Manual Page 2 of 15 Proprietary Notice This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or disclosed to other parties in whole or in part without prior written authorization from IDENTEC SOLUTIONS. Disclaimer and Limitation of Liability IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents provide the information contained in this Manual on an “as-is” basis and do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to non- infringement, reliability, fitness for a particular purpose, usefulness, completeness, accuracy or up-to-dateness. IDENTEC SOLUTIONS shall not in any circumstances be liable to any person for any special, incidental, indirect or consequential damages, including without limitation, damages resulting from use of or reliance on information presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the possibility of such damages. Trademarks “IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks and “i-Q”, “i-D”, “i-B”, “i-CARD”, “i-PORT”, “i-LINKS”, “Solutions. It’s in our name.”, “Smarten up your assets” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC SOLUTIONS AG. Copyright Notice Copyright © 2007 IDENTEC SOLUTIONS. All rights reserved. No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic, mechanical or otherwise, or used in any information storage and retrieval system, without the prior written permission of IDENTEC SOLUTIONS. Issue 0 / January 2010 – 25. January 2010 – IDENTEC SOLUTIONS AG, Millenium Park 2, 6890 Lustenau, Österreich Phone: +43 5577 87387- 0, Fax: +43 5577 87387-15 E-Mail: [email protected] www.identecsolutions.com Subject to alteration without prior notice. © Copyright IDENTEC SOLUTIONS 2009 Printed in Germany i-Q350 RTLS Tag Manual Page 3 of 15 Radio Frequency Compliance Statement IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices: MODELS: i-Q350 RTLS Region/CountryOrganization Marking EUROPE: EC CE USA FCC FFC ID OO4-ILR-IQ350RT Canada Industry Canada IC:3538A-IQ350RT The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, or any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning: This product requires professional installation. Any frequency and RF-power setting not expressly authorized by Identec Solutions is prohibited and will void the users authority to operate the equipment. European Notification according R&TTE Directive This equipment complies to Art. 6.4 of R&TTE Directive (1999/5/EC). It is tested for compliance with the following standards: ETSI EN 300 220, ETSI EN 301 489, EN 60950 USA Notification This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, or any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Installation and Operation Manual Page 4 of 15 Contents 1 INTRODUCTION ........................................................................................................... 5 1.1 PREPARATIONS..............................................................................................................5 1.2 RECOMMENDED PROCEDURE.............................................................................................5 1.3 SCOPE OF THIS DOCUMENT...............................................................................................5 1.4 RESPONSIBILITY.............................................................................................................5 1.5 ASSOCIATED DOCUMENTS.................................................................................................5 1.6 SCOPE OF DELIVERY—VISUAL INSPECTION...........................................................................5 2 SAFETY PRECAUTIONS ................................................................................................ 6 3 TAG MOUNTING TECHNIQUES ..................................................................................... 7 3.1 CABLE STRAPS...............................................................................................................7 3.2 RIVETS........................................................................................................................8 3.3 SCREWS.......................................................................................................................9 4 INITIAL OPERATION.................................................................................................. 11 4.1 CONFIGURATION OF THE TAG..........................................................................................11 5 MAINTENANCE ........................................................................................................... 12 5.1 GENERAL....................................................................................................................12 5.2 BATTERY EXCHANGE...................................................…

Text truncated - open the document above for the full version.

Request for Confidentiality PHOENIX TESTLAB GmbH Date: February 26, 2010 Product Certification Königswinkel 10 D 32825 Blomberg RE: Certification Application FCC ID: OO4-ILR-IQ350RT Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rule, the applicant hereby requests confidential treatment of information accompanying this application as outlined below: • Schematics • Block Diagram • Technical Description • Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457, disclosure od this application and all accompanying documentation will not be made before the date of the GRANT for this application ́. Thank you for your attention in this matter. Applicant’s Company : TÜV SÜD SENTON GmbH address : Auessere Fruehlingstrasse 45, D-94315 Straubing Signature : Johann Roidt Job Title and Dept. : Technical Director

FCC ID OO4-ILR-IQ350RT FCC ID OO4-ILR-IQ350RT

Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Test Report No. 69861-00628-2 (Edition 3) Page 1 of 64 Pages Prüfbericht / Test Report Nr. / No. 69861-00628-2 (Edition 3) Applicant: IDENTEC SOLUTIONS AG Type of equipment: Active UHF Tag Type designation: i-Q350 RTLS Order No.: 1930298 Test standards: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207, 15.215 and 15.247 Industry Canada Radio Standards Specifications RSS-Gen Issue 2, Section 7.2.2 and RSS-210 Issue 7, Sections 2.2, A8 (Category I Equipment) March 16, 2010 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 3) Page 2 of 64 Pages Table of Contents 1 Description of the Equipment Under Test (EUT)......................................................... 3 2 Administrative Data ..................................................................................................... 4 3 Identification of the Test Laboratory............................................................................ 5 4 Summary..................................................................................................................... 6 5 Operation Mode and Configuration of EUT ................................................................. 7 6 Measurement Procedures ........................................................................................... 8 6.1 Conducted Output Power...................................................................................... 8 6.2 Bandwidth Measurements .................................................................................. 10 6.3 Radiated Emission Measurement 9 kHz to 30 MHz............................................ 12 6.4 Radiated Emission in Fully or Semi Anechoic Room .......................................... 14 6.5 Radiated Emission at Open Field Test Site ........................................................ 16 7 Photographs Taken During Testing........................................................................... 18 8 Test Results .............................................................................................................. 22 8.1 Occupied Bandwidth ........................................................................................... 24 8.2 Bandwidth of the Emission.................................................................................. 34 8.3 Designation of Emissions.................................................................................... 39 8.4 6 dB-Bandwidth................................................................................................... 40 8.5 Spectral Power Density....................................................................................... 43 8.6 Maximum output power....................................................................................... 48 8.7 Radiated Emission Measurement 9 kHz to 30 MHz........................................... 51 8.8 Radiated Emission Measurement 30 MHz to 25 GHz........................................ 52 8.9 RF exposure requirement ................................................................................... 59 8.10 Exposure of Humans to RF Fields ...................................................................... 60 9 Referenced Regulations............................................................................................ 62 10 Revision History ........................................................................................................ 63 11 Charts taken during testing ....................................................................................... 64 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 3) Page 3 of 64 Pages 1 Description of the Equipment Under Test (EUT) General data of EUT Type designation 1 : i-Q350 RTLS Parts 2 : Serial number(s): 0.440.000.203 0.440.000.848 Manufacturer: IDENTEC Solutions AG Type of equipment: Active UHF Tag Version: FCC ID: Additional parts/accessories: Technical data of EUT Application frequency range: 2400.0 - 2483.5 MHz Frequency range: 2.44 GHz Operating frequency: 2.44 GHz Type of modulation: F1D Pulse train: --- Pulse width: --- Number of RF-channels: 1 Channel spacing: --- Designation of emissions 3 : Type of antenna: Integrated Size/length of antenna: Connection of antenna: detachable not detachable Type of power supply: Battery supply Specifications for power supply: nominal voltage: 3.6 V 1 Type designation of the system if EUT consists of more than one part. 2 Type designations of the parts of the system, if applicable. 3 Also known as "Class of Emission". TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 3) Page 4 of 64 Pages 2 Administrative Data Application details Applicant (full address): IDENTEC SOLUTIONS AG Millennium Park 2 A-6890 Lustenau Contact person: Mr. Simon Prior Contract identification: 1930298 Receipt of EUT: December 1, 2009 (0.440.000.203) March 16, 2010 (0.440.000.848) Date(s) of test: December 2009 March 2010 Note(s): Mr. Günther Meuthen representing the applicant attended testings on December 1, 2009. This test report covers the operating in the 2400.0 MHz to 2483.5 MHz freqency band. for the operating in the 919 MHz fre- quency band please rerfer to TÜV SÜD SENTON test report No. 69861-00628-1. Tests in December 2009 were performed with test sample 0.440.000.203. Tests in March 2010 were perfo…

Text truncated - open the document above for the full version.

Test Equipment List with Calibration Data Seite 1 von 2 Test report number(s): Date of test: 69861-00628-1/-2 12/2009 Date of Calibration Type Inv.-No. Type Designation Serial Number Manufacturer Calibration Organization Last Next Test receiver 1028 ESHS10 860043/016 Rohde & Schwarz Rohde & Schwarz 02/2009 08/2010 EMI Test receiver 1569 ESMI 839379/013 Rohde & Schwarz Rohde & Schwarz 09/2009 12/2011 EMI test receiver 1711 ESPI7 836914/0002 Rohde & Schwarz Rohde & Schwarz 09/2009 03/2011 EMI test receiver 1863 ESCI 100008 Rohde & Schwarz Rohde & Schwarz 06/2008 06/2010 EMI test receiver 2010 ESPI7 101018 Rohde & Schwarz Rohde & Schwarz 03/2008 03/2010 Test receiver 2031 ESVP 891846/003 Rohde & Schwarz Rohde & Schwarz 10/2008 04/2010 Test receiver 2044 ESU8 100232 Rohde & Schwarz Rohde & Schwarz 05/2009 11/2010 Spectrum analyser 1666 FSP30 100063 Rohde & Schwarz Rohde & Schwarz 11/2009 05/2011 Spectrum analyser 2034 ZVL 6 100377 Rohde & Schwarz Rohde /& Schwarz 09/2008 03/2010 Preamplifier 1142 R14601 13120026 Advantest TÜV SÜD SENTON 04/2008 04/2010 Preamplifier 1484 ACO/180-3530 32641 CTT TÜV SÜD SENTON 05/2008 02/2010 Preamplifier 1651 CPA9231A 3393 Schaffner Electrotest TÜV SÜD SENTON 05/2008 02/2010 Preamplifier 1684 AFS3-00100800-32-LN 847743 MITEQ TÜV SÜD SENTON 05/2008 02/2010 V-network 1059 ESH3-Z5 894785/005 Rohde & Schwarz Rohde & Schwarz 05/2009 05/2012 V-network 1060 ESH3-Z5 862770/021 Rohde & Schwarz Rohde & Schwarz 01/2007 01/2010 V-network 1218 ESH3-Z5 830952/025 Rohde & Schwarz Rohde & Schwarz 07/2008 07/2011 Loop antenna 1016 HFH2-Z2 882964/0001 Rohde & Schwarz Rohde & Schwarz 09/2009 03/2011 Double ridged waveguide horn antenna 1516 3115 9508-4553 EMCO Elektronik ARC 05/2008 05/2011 Biconical antenna 1518 HK116 842204/01 Rohde & Schwarz Rohde & Schwarz 06/2008 12/2009 Logarithmic-periodic antenna 1519 HL223 841516/23 Rohde & Schwarz Rohde & Schwarz 06/2008 12/2009 TRILOG broadband antenna 1722 VULB 9163 9163-188 Schwarzbeck Schwarzbeck 04/2008 01/2010 Note: Date of next calibration contains maximum tolerance if applicable. Test Equipment List with Calibration Data Seite 2 von 2 Test report number(s): Date of test: 69861-00628-1/-2 12/2009 Date of Calibration Type Inv.-No. Type Designation Serial Number Manufacturer Calibration Organization Last Next Multimeter 1653 21 III 76530546 Fluke ZMK 05/2008 02/2011 Multimeter 1654 21 III 76381229 Fluke ZMK 03/2008 12/2010 Multimeter 1975 Fluke 77 III 92370108 Fluke ZMK 09/2008 06/2011 Multimeter 1976 Fluke 77 IV 93090238 Fluke ZMK 09/2008 06/2011 Digital multimeter 2025 Fluke 177 96720024 Fluke ZMK 09/2008 06/2011 Digital multimeter 2026 Fluke 177 96720025 Fluke ZMK 09/2008 06/2011 EMI test receiver 2044 ESU 100232 Rohde & Schwarz Rohde & Schwarz 05/2009 11/2010 Power meter 1264 NRVS 836856/015 Rohde & Schwarz Rohde & Schwarz 05/2008 05/2011 Signal generator 2027 SMB 100A 100112 Rohde & Schwarz Rohde & Schwarz 08/2008 08/2011 Attenuator 1638 4776-10 9412 Narda TÜV SÜD SENTON 04/2008 04/2010 Horn antenna 3160-03 9112-1003 EMCO Elektronik Note 2 Horn antenna 3160-04 9112-1001 EMCO Elektronik Note 2 Horn antenna 1012 3160-05 9112-1001 EMCO Elektronik Note 2 Horn antenna 1013 3160-06 9112-1001 EMCO Elektronik Note 2 Horn antenna 1014 3160-07 9112-1008 EMCO Elektronik Note 2 Horn antenna 3160-08 9112-1002 EMCO Elektronik Note 2 Horn antenna 3160-09 9403-1025 EMCO Elektronik Note 2 Horn antenna 3160-10 399185 EMCO Elektronik Note 2 Note 1: Date of next calibration contains maximum tolerance if applicable. Note 2: According to manufacturer's specifications no calibration is required but mechanical check only. This check is perform ed before every test sequence.

TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 1) Page 19 of 65 Pages Test setup for radiated emission measurement (fully anechoic room) TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 1) Page 20 of 65 Pages Test setup for radiated emission measurement (open field test site) TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 D-94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 eMail: [email protected] Web: www.tuev-sued.de/senton Test Report No. 69861-00628-2 (Edition 1) Page 21 of 65 Pages Test setup for radiated emission measurement (open field test site) - continued -