ORV-LSTCTDECT base station

User Manual Instructional Audio System 2 Table of Contents MAINTENANCE & TROUBLESHOOTING 35 Clearmike Battery Replacement 36 Sharemike Battery Replacement 37 Troubleshooting 38 Tips for Optimum Audio Performance WARRANTY, SAFETY & SPECIFICATIONS 39 Five-Year Limited Warranty 40 Safety Warnings and Certifications 46 System Components 47 System Specifications OVERVIEW 3 Important Safety Instructions 5 System Components and Unpacking 6 Optional Components 7 Topcat Controls 8 T25 Controls and Indicators 10 Clearmike Controls and Connections 13 Microphone Cradle Charger SET-UP & OPERATION 14 Charging the Clearmike 15 Setting Up the Clearmike 17 Pairing your Clearmike 18 Using Your Microphone as a Wireless Audio Link 19 Audio Integration 20 Analog Control Features OPTIONAL ACCESSORIES 22 Sharemike Controls and Connections 24 Sharemike: Initial Set-Up 25 Pairing your Sharemike 26 Media Connector Controls and Indicators 28 Media Connector Set Up and Operation 29 Connecting Media Connector to Audio 30 Output Audio to Assistive Listening Device (ALD) 31 Pairing Topcat to Media Connector 32 Media Connector: Audio Integration 33 Activate System with Pods 34 Wall Plate 3 OVERVIEW OVERVIEW 1. Do not use the apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation openings. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet. 6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 8. When the mains plug or appliance coupler is used as the disconnect device, it shall remain readily operable after installation. Lorsque la fiche secteur ou le coupleur de l’appareil est utilisé comme dispositif de déconnexion, il doit rester facilement utilisable après l’installation. 9. When installing via direct wiring to AC mains, an appropriate disconnect device shall be incorporated in the electrical installation of the building in accordance with local building codes. Lors de l’installation via un câblage direct sur le secteur CA, un dispositif de déconnexion approprié doit être intégré à l’installation électrique du bâtiment conformément aux codes du bâtiment locaux. 10. Please keep the unit in a good ventilation environment. 11. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l’humidité. 12. WARNING: Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. (1) The battery pack is not serviceable. Do not open, disassemble, or service any battery pack. (2) Do not crush or cut or puncture the internal battery cell. (3) Do not short-circuit the battery, or expose it to water or other liquids. (4) Do not touch the internal battery cell for any reason. (5) Keep the battery away from fire or a hot oven. Do not dispose of the battery into fire or a hot oven. (6) Keep the product with battery away from extremely low air pressure or high temperature surrounding environment. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. (7) Stop using the battery pack if it is damaged, or if you notice any discharge or the buildup of foreign materials on the battery contacts. (8) Do not put the battery in trash that is disposed of in landfills. When disposing of the battery pack, comply with local ordinances or regulations. 13. CAUTION: Risk of explosion if battery is replaced by any battery other than Lightspeed Part # L3.7V Important Safety Instructions 4 To avoid potential equipment damage and/or serious injury, READ AND FOLLOW all safety precautions when installing Topcat Cascadia. WARNINGS are included throughout the procedural steps in this guide, and are repeated below for emphasis. • USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. Topcat system uses standard 100 – 240VAC power. Obtain the services of a licensed electrician when supplying and connecting power to the ceiling enclosure. BE SURE electrical installation complies with local building codes. Improperly installing and/or connecting power to the system may result in EQUIPMENT DAMAGE, serious INJURY and/or DEATH. • DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs (9 kg), and requires at least two people to install. DO NOT install alone. • USE SUITABLE LADDERS. Use proper ladders or support platforms when installing Topcat enclosure. DO NOT stand on chairs, tables, or other unsuitable surfaces. • SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full weight of the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling enclosure is designed to be suspended at TWO POINTS by suspension wires (secured to rafters or other suitable building structure) and to rest LIGHTLY on the tile grid. • ATTENTION INSTALLER: Attach supplied safety cable in accordance with state and local building code requirements. NOTE: Wiring to these terminals should follow the Class 2 wiring methods as outlined in the National Electric Code. Le câblage vers ces bornes doit suivre…

Text truncated - open the document above for the full version.

Radiated Emissions Antenna Port Conducted Temperature Testing Conducted Emissions

Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 1 of 31 Cascadia RF Antenna Specifications 1.0 Summary This document covers the Cascadia C25 and CMT antenna specifications required for regulatory documentation. Cascadia C25 is a DECT base (FP) device and the CMT is a DECT handset (PP) device. The antenna specifications included in this document are: • Physical Description • Frequency Range • Antenna Gain • Antenna Pattern • S11 measurements (Log Mag, Impedance, SWR) 1.1 Antenna Measurements Test Setup: The antenna measurements were performed inside a non-anechoic RF chamber, with the antenna-under-test integrated into the product, on a near-field antenna scanner. All antenna related measurements were performed radiated, and the pictures below show the actual test setup. The antenna test setup is comprised of Antenna Scanner (EMSCAN RFX2), a Portable VNA (Fieldfox) and a Power Meter. The instruments are all connected as shown on the diagram below and are automatically controlled by the scanner’s manufacturer commercially provided software (RFxpert). Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 2 of 31 Antenna Test Setup: Instruments Connection Diagram The only required manual step in the antenna measurement process is a needed rotation of the DUT by 180 degrees along the Y-axis to get a full spherical antenna pattern as shown below. Antenna Test Setup: Full Spherical Pattern Measurement Method Once the frequency range is selected, the scanner will measure and output the following Near-field and Far-field antenna parameters: -Radiated Power (PRAD and EIRP) -Efficiency Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 3 of 31 -Return Loss (S11) -Gain -2D/3D Radiation Patterns The antennas Return Loss (S11) and SWR were also measured independently on a benchtop Spectrum Analyzer (Siglent SSA 3075X-R). One RF pigtail was connected in line with each antenna to perform the measurement as shown below: Antenna Test Setup: S11 + SWR Engineer that performed the test: Fabrice Pouani ([email protected]) on 02/27/2023 (CMT) and 03/09/2023 (C25) Rob D’Angelo ([email protected] on 11/08/2023 (CMT) and 11/09/2023 (C25) Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 4 of 31 Test equipment List: - EMSCAN RFX2 - Antenna Analyzer | Calibrated by the Manufacturer (EMSCAN) on 08/21/2017 - KEYSIGHT U2001A - USB Power meter | Calibrated by the Manufacturer (KEYSIGHT) on 08/03/2017 - KEYSIGHT FieldFox N9923A – Portable VNA | Calibrated by the Manufacturer (KEYSIGTH) on 08/03/2017 - SIGLENT SSA 3075X-R – Spectrum Analyzer | Calibrated by the Manufacturer (SIGLENT) on 06/01/2023 2.0 CMT Antenna Specification The CMT is a DECT PP device and uses a single monopole quarter wavelength wired antenna. 2.1 Physical Description Antenna Type: Single quarter wavelength wired bent monopole. Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 5 of 31 Drawing: Dimensions are in mm Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 6 of 31 PCB Footprint The antenna mounts on the bottom side of the PCBA. This image shows the mounting hole specifications. 2.2 Frequency Range The antenna design is optimized for DECT US and EU carrier frequencies. • DECT US: 1.92GHz to 1.93GHz (5 carriers) • DECT EU: 1.88GHz to 1.90GHz (10 carriers) Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 7 of 31 2.3 Antenna Gain These measurements were made by Synapse as part of the RF lab evaluation. Test Setup: The antenna measurements were performed inside a non-anechoic RF chamber, with the antenna-under-test integrated into the product, on a near-field antenna scanner. The pictures below show the actual test setup Antenna Test Setup: DUT (CMT) on Antenna Scanner + Portable VNA Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 8 of 31 Antenna Test Setup: DUT (CMT) on Antenna Scanner - Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 9 of 31 2.4 Antenna Patterns These measurements were made during lab evaluation of the RF performance in a chamber. Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 10 of 31 Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or distribution is strictly prohibited by Lightspeed Technologies, Inc. Page 11 of 31 Cascadia Antenna Specifications Version 2.0 COMPANY CONFIDENTIAL: This document is highly confidential. Any unauthorized copying and/or …

Text truncated - open the document above for the full version.

EMI4019.05 Testing Report Page 1 of 110 LIG20250929 ElectroMagnetic Investigations TCT FCC (USA)/ISED (Canada) TEST REPORT FCC 47 CFR Part 15D Unlicensed Personal Communications Service Devices Industry Canada RSS-213 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) EMI4019.05 Testing Report Page 2 of 110 LIG20250929 ElectroMagnetic Investigations TCT Report Reference No: LIG20250929-01 Testing Laboratory: ElectroMagnetic Investigations, LLC Address: 8531 NE Cornell Road. Suite 600, Hillsboro, OR, USA Accreditation: A2LA Accredited Testing Laboratory Applicant’s name: Lightspeed Technologies, Inc. Address: 11509 SW Herman Rd. Tualatin, OR 97062 United States Testing specification Standard: FCC 47 CFR Part 15D FCC 47 CFR Part 15C FCC 47 CFR Part 15B RSS-213, Issue 3, 2015-03 RSS-Gen, Issue 5, 2018-04 ANSI C63.17 :2013 ANSI C63.4 :2014 Equipment Under test (EUT): TCT Serial Number: 02-TCE-A-P2510-00387 Product description: DECT base station Model No. TCT Additional Model(s): N/A Hardware version: A Firmware / Software version: 7.1.14 FCC ID: ORV-LSTCT IC ID 1732-LSTCT Test result: Passed EMI4019.05 Testing Report Page 3 of 110 LIG20250929 ElectroMagnetic Investigations TCT Possible test case verdicts Neither assessed nor tested: N/N Required by standard but not applicable: N/A Required by standard but not tested: NOT PERFORMED Not required by standard: N/R EUT meets the requirement: P (Pass) EUT does not meet the requirement: F (Fail) Testing Test Lab Temperature: 20 – 28 C Test Lab Humidity: 30 – 38 % Date EUT received: 2025/11/05 Date(s) of performance of tests: 2025/11/05 to 2026/01/30 Complied by: Ryan Benitez Tested by: Ryan Benitez Approved by: Henry Benitez Date of issue: 2026/02/04 Total number of pages: 110 General remarks The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report shall not be reproduced, except in full, without written approval of the issuing test laboratory. EMI4019.05 Testing Report Page 4 of 110 LIG20250929 ElectroMagnetic Investigations TCT Revision History Version Date Issued Description of Revision Authorizations FCC (USA): Accepted by FCC for performance of radiated emissions and conducted emissions measurements. FCC ID: US1092. Industry Canada: Accepted by Industry Canada for performance of radiated emissions and conducted emissions measurements. ISED Canada CAB ID US0203. European Union (CE): ElectroMagnetic Investigations, LLC is equipped and capable of performing EMC CE compliance testing to European Union EMC CE requirements for Information Technology Equipment (ITE), Measurement, Control and Laboratory Equipment (MCL), and other equipment. American Association of Lab Accreditations (A2LA): ElectroMagnetic Investigations is accredited to perform the tests contained within this report to the standards listed. Certificate #2569.01 EMI4019.05 Testing Report Page 5 of 110 LIG20250929 ElectroMagnetic Investigations TCT Report Index 1 Equipment (Test item) Description 1.1 Photos – Equipment external 1.2 Photos - Equipment internal 1.3 Photos – Test setup 1.4 Supporting equipment used during testing 1.5 Test modes 1.6 Test equipment used during testing 1.7 Sample of emissions level calculations 2 Result Summary 3 Test Conditions and results 3.1 Channel Frequencies 3.2 AC Power line conducted emissions 3.3 Antenna requirement 3.4 Digital modulation 3.5 Occupied Bandwidth 3.6 Emissions Bandwidth 3.7 Peak transmit power 3.8 Power spectral density 3.9 Frequency stability 3.10 In-band unwanted emissions 3.11 Out-of-band emissions 3.12 Receiver spurious emissions 3.13 Automatic discontinuation of transmission 3.14 Radiofrequency radiation exposure 3.15 Monitoring threshold 3.16 LIC confirmation 3.17 LIC selection 3.18 Monitoring antenna 3.19 Monitoring time 3.20 Monitoring bandwidth 3.21 Monitoring reaction time 3.22 Access Criteria functional test 3.23 Acknowledgments 3.24 Maximum transmit duration 3.25 Maximum spectral occupancy 3.26 Fair access 3.27 Frame period and Jitter 3.28 Frame and repetition stability EMI4019.05 Testing Report Page 6 of 110 LIG20250929 ElectroMagnetic Investigations TCT 1 Equipment (Test item) description Description: DECT Base Station Model: TCT Additional Model(s): N/A Brand Name(s): Lightspeed Technologies, Inc. Serial number: 02-TCE-A-P2510-00387 Hardware version: A Software / Firmware version: 7.1.14 FCC-ID: ORV-LSTCT IC: 1732-LSTCT Equipment type: End product Radio type: DECT fixed part Number of radios: 1 DECT transceiver built into device Radio technology: DECT 6.0 Operating frequency range: 1921.536 – 1928.448 MHz Assigned frequency band: 1920 – 1930 MHz Number of RF channels: 5 Supported slots: even and odd Number of time slots: 12 x Tx + 12 x Rx = 24 Channels F 0 CH:0 / 1928.448 MHz F 1 CH:1 / 1926.720 MHz F 2 CH:2 / 1924.992 MHz F 3 CH:3 / 1923.264 MHz F 4 CH:4 / 1921.536 MHz Main test frequencies F low CH:4 / 1921.536 MHz F mid CH:2 / 1924.992 MHz F high CH:0 / 1928.448 MHz Modulations GFSK Emissions designator F7D Nominal emission bandwidth 1.42 MHz Channel spacing 1728 kHz Spectrum access Listen before transmit Nominal lower threshold N/A Nominal upper threshold 16.54 dBm Number of antennas 2 EMI4019.05 Testing Report Page 7 of 110 LIG20250929 ElectroMagnetic Investigations TCT Antenna 0 Type Bent Monopole Gain 6.7 dBi Antenna 1 Type Bent Monopole Gain 6.6 dBi Manufacturer Lightspeed Technologies, Inc. 11509 SW Herman Rd. Tualatin, OR 97062 United States Power supply V nom 120 volts V min 100 volts V max 240 volts AC/DC adaptor Model DSA-60W-20 1 Vendor Lightspeed Input 100-240 V 50/60 Hz Output 24 V DC Temperature T nom 20 C T min -20 C T max 50 C EMI4019.05 Testing Report Page 8 of 110 LIG20250929 ElectroMagnetic Investigations…

Text truncated - open the document above for the full version.

1. Purpose This report evaluates the RF exposure of the TCT base station. This report follows the calculations outlined in OET bulletin 65, Edition 97-01. 2. References • RSS-102 issue 6 • FCC 47 CFR Part 1, section 1.310 • FCC KDB 447498 DO1, RF Exposure Procedures and Equipment Authorization Polices for Mobile and Portable Devices, V6 • OET bulletin 65, Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields, Edition 97-01 3. Equipment Description Description: DECT Base Station Model: TCT Additional Model(s): None Brand Name(s): Lightspeed Corporation Serial Number: 02-TCE-A-P2510-00387 HW version: Rev A FW Version: 7.1.14 FCC ID: ORV-LSTCT IC: 1732B-LSTCT Equipment type: End Product 3.1. Radiation Sources Mode Description UPCS Frequency Range 1921.536 – 1928.448 MHz Channels 5 Modulations GFSK Max Conducted power [dBm] 16.54 Antenna gain [dBi] 6.5 4. Rf Exposure Classification Threshold calculation FCC FCC Limits – General Population / Uncontrolled Exposure Frequency range [MHz] Electric field strength [V/M] Magnetic field strength [A/M] Power density [mW/cm^2 ] Averaging time [min] 0.3 - 1.34 614 1.63 100 30 1.34 - 30 842/f 2.19 / f 180 / f^2 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 N/A N/A f / 1500 30 1500 - 100000 N/A N/A 1 30 Threshold calculation RSS-102 Issue 6 5. Assessment OET bulletin 65 uses the following equation to predict the strength of an RF field at a given distance: The results of the assessment are shown below: Threshold calculation, FCC Assessment Results Variable Value Unit Assessment frequency (f) 1921.536 MHz FCC Limit 1 W/m^2 Peak Conducted Power (P) 16.54 dBm 45.1 mW Peak Antenna Gain (G) 6.5 dBi 4.47 Distance (R) 20 cm Power Density (S) 0.40 W/m^2 The power density of the EUT at 20cm is below the FCC limit. Threshold calculation, RSS-102 issue 6 separation distance 200 mm frequency 1921.536 MHz Threshold 2.3 W EUT Output Power Assessment Results Max power 16.54 dBm Antenna gain 6.5 dBi Power for RF Exposure 23.04 dBm 0.19 W (EIRP) As EIRP is below Threshold the device is exempt from rf exposure evaluation.

TCT Internal Photos

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 10/14/2025 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: ORV-LSTCT FCC FRN: 0006242663 To whom it may concern: Lightspeed Technologies (“the applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Mike Frost Lightspeed Technologies 11509 SW Herman Road Tualatin, OR. 97206 [email protected] Sincerely yours, Mike Frost Lightspeed Technologies 11509 SW Herman Road Tualatin, OR. 97206 [email protected]

TCT Label Locations and Content • Nameplate Content o • Nameplate Location o • External FCC/ISED ID Label o Content ▪ o Location ▪

A1 ZEH REV A1 Release 1:1 LABEL, FCC/ISED ID, TCT Part Number: Desc: 334-00034 Notes: 1.Material: Brady B-8115B or approved equivalent A.BASE MATERIAL, ADHESIVE, INK, AND ANY FINISH OR FACING OVERLAMINATE MATERIAL SHALL SATISFY UL 62368-1 B.LABEL MUST BE PRODUCED IN ACCORDANCE WITH UL 969 2.Color: A.Label: White B.Text: Black 3.Corner Radii: 5mm 4.ALL UNDIMENSIONED FEATURES TO BE +/- 0.1 mm ZEH 09/16/2025 MODEL: TCT FCC ID: ORV-LSTCT IC: 1732-LSTCT 62mm 12mm

A1 Z. Heise REV A1 Release 1:1 LABEL, NAMEPLATE, TCT Part Number: Desc: 334-00021 Notes: 1.Material: Brady B-8115B or approved equivalent A.BASE MATERIAL, ADHESIVE, INK, AND ANY FINISH OR FACING OVERLAMINATE MATERIAL SHALL SATISFY UL 969-PGDQ2 2.Color: A.Label: Black, Matte B.Text: White 3.Corner Radii: 2.8mm 4x 4.ALL UNDIMENSIONED FEATURES TO BE +/- 0.1 mm ZEH 16SEPT2025 FCC ID: ORV-LSTCT IC: 1732B-LSTCT DC Input: 24VDC / 2.5A Lightspeed Technologies, Inc. www.lightspeed-tek.com 800.732.8999 MODEL: TCT Made in Malaysia AC Input: 100-240VAC 50-60Hz / 1.5A 77.6 mm 21.6 mm

TCT External Photos

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 10/14/2025 To whom it may concern: I, the undersigned, hereby authorize ElectroMagnetic Investigations, LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ElectroMagnetic Investigations, LLC on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing ElectroMagnetic Investigations, LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mike Frost Senior Engineer Lightspeed Technologies

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 10/14/2025 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: ORV-LSTCT To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Best Regards Mike Frost Senior Engineer Lightspeed Technologies

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax 04/01/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: ORV-LSTCT 1. Lightspeed Technologies, Inc (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Lightspeed Technologies, Inc (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. Lightspeed Technologies, Inc (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Michael Frost Job Title: Senior Engineer Company Name: Lightspeed Technologies, Inc