ORV-LSRCTDECT base station

User Manual Instructional Audio System ® 2 Table of Contents MAINTENANCE & TROUBLESHOOTING 32 Clearmike Battery Replacement 33 Sharemike Battery Replacement 34 Re dcat Battery Replacement 34 Re mplacement de la batterie Redcat 35 Troubleshooting WARRANTY & SAFETY 36 Five-Year Limited Warranty 37 Safety Warnings and Certifications 43 System Components 44 System Specifications OVERVIEW 3 Important Safety Instructions 4 System Components and Unpacking 5 O ptional Accessories 6 C ontrols and Connections 8 C learmike Controls and Connections SET-UP & OPERATION 12 Determine Set-Up Location 13 Install Wall-Mounted Security Bracket 14 Connecting the Power Supply 15 Audio Integration 16 Setting Up the Clearmike 17 Charging the Clearmike 18 Daily Use of the Clearmike 19 P airing your Clearmike 20 O utput to Assistive Listening Device (ALD) 21 Using Your Microphone as a Wireless Audio Link OPTIONAL ACCESSORIES 22 Sharemike Controls and Connections 25 Media Connector Controls and Indicators 27 Media Connector Set Up and Operation 28 Connecting Media Connector to Audio 29 P airing Redcat to Media Connector 31 Battery Pack for Redcat 3 OVERVIEW Important Safety Instructions OVERVIEW 1. Do not use the apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation openings. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet. 6. P rotect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7. Unplug this apparatus during lightning storms or when unused for long periods of time. 8. R efer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. When the mains plug or appliance coupler is used as the disconnect device, it shall remain readily operable. 10. Please keep the unit in a good ventilation environment. 11. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 12. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 13. WARNING: Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. (1) The battery pack is not serviceable. Do not open, disassemble, or service any battery pack. (2) Do not crush or cut or puncture the internal battery cell. (3) Do not short-circuit the battery, or expose it to water or other liquids. (4) Do not touch the internal battery cell for any reason. (5) Keep the battery away from fire or a hot oven. Do not dispose of the battery into fire or a hot oven. (6) Keep the product with battery away from extremely low air pressure or high temperature surrounding environment. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. (7) Stop using the battery pack if it is damaged, or if you notice any discharge or the buildup of foreign materials on the battery contacts. (8) Do not put the battery in trash that is disposed of in landfills. When disposing of the battery pack, comply with local ordinances or regulations. 14. C AUTION: Risk of explosion if battery is replaced by any battery other than Lightspeed Part # L3.7V 4 System Components and Unpacking The standard configuration of Redcat will contain: Redcat Receiver/Amplifier and Power Supply OVERVIEW PLEASE NOTE: Redcat and any wireless components (microphones, Media Connector) are paired together at the factory. Please keep all components together as a system. Moving them from one system or room to another will result in the need to re-pair them. Redcat Microphone Cradle Charger and Power Supply Clearmike Teacher Microphone 5 Optional Accessories OVERVIEW Media Connector with power adapter and cable Sharemike Handheld Microphone Input Power Status OutputTone Level Push Redcat Battery Pack 6 Controls and Connections OVERVIEW Redcat REAR PANEL FRONT PANEL 1. CARRYING HANDLE INSET 2. WALL MOUNTING SLOTS 3. S ECURITY BRACKET SLOT 4. CABLE MANAGEMENT AND STRAIN RELIEF 5. C OMPARTMENT FOR OPTIONAL BATTERY PACK 1. STATUS LIGHT: Microphone link and pair indicators Solid blue: Audio link has been established Alternating blue/white: Pairing in process Off: Unpaired or nothing linked 2. POWER LIGHT Solid white: Indicates power on 21 1 4 5 3 22 7 Input Output Tone Push Level Powe r 24V/1.75A Input Output Side Panel Controls and Connections OVERVIEW 1. POWER BUTTON / LEVELS ADJUSTMENT: Press this button to turn the system power on or off. This also functions as an adjustment knob for the volume and tone depending on the mode selected (see 2, 3, 5 below). 2. AUDIO INPUT VOLUME SELECTOR: Selects Volume as the mode for the adjustment knob (1) for the audio sources connected to the audio input jack below. 3. AUDIO OUTPUT VOLUME SELECTOR: Selects Volume as the mode for the adjustment knob (1) for the audio device connected to the audio output jack below. 4. TONE SELECTOR: Selects tone as the mode for the adjustment knob (1) that adjusts the bass or treble that is heard through the Redcat. 5. AUDIO INPUT JACK: 3.5mm stereo connector for connecting to a computer or mobile device as an audio source. 6. AUDIO OUTPUT JACK: 3.5mm stereo connector for connecting to an assisted listen…

Text truncated - open the document above for the full version.

26 OPTIONAL ACCESSORIES 1. AUDIO INPUTS: Three analog 3.5mm stereo connectors and one digital optical connector for connecting classroom audio sources to be played through audio system. 2. AUDIO OUTPUTS: 3.5mm stereo connectors for connecting to an assisted listening device (ALD) or to a computer for recording. 3. USB INPUT: Plug the USB-C end of the power cable into this USB port on the Media Connector. • T he USB port supplies power to Media Connector when connected to the Media Connector power supply, or from a laptop. • It also acts as an input for a digital audio when connected to an audio source. Note that when the USB is used for audio input, the other four audio input jacks are not operational. 123 BACK PANEL Media Connector Controls and Indicators Audio Inputs Optical USB 5V / 0.2A Audio Outputs 27 OPTIONAL ACCESSORIES Media Connector Set Up and Operation WALL-MOUNT OR DESKTOP The Media Connector can be placed on a table surface or wall- mounted. • C hoose a location that is convenient to the classroom audio sources and power supply. • It should be located 3-6 feet off of the floor to allow for good transmission. • Do not enclose in a metal cabinet or in a location where the signal will be obstructed. NOTE: The Media Connector does not require a direct line of sight to the Redcat. However it functions best when no obstructions are between the two devices. Media Connector Set Up and Operation DETERMINE LOCATION Media Connector is designed to be connected to the primary media source in the classroom, usually the computer or display panel. CONNECT TO POWER Connect the USB power cord to a computer. Plug the USB cable into the USB input on the back of the Media Connector. OR Use the USB power adapter to plug into a wall outlet. Input Power Status OutputTone Level Push OR Audio Input Audio Output Tone Level Push StatusPower MediaMedia ConnectorConnector USB Cable USB Power Adapter 28 OPTIONAL ACCESSORIES Connecting Media Connector to Audio Audio can be connected using either a digital 2-way USB audio or analog audio: USB Audio If locating and connecting to computer USB, Media Connector will default to digital USB audio (3.5mm analog audio ports will be disabled). USB audio enables a 2-way audio link to: Send audio from the computer to the Redcat to ensure all audio can be played through the Topcat speaker. Send audio to the computer from the Redcat to ensure the teacher’s Clearmike and any student microphones are clearly picked up by a video conferencing solution. DISABLE/ENABLE USB Audio To disable USB Audio and use computer USB for power only • Unplug USB cable from Media Connector • Press and hold Audio Output button • Plug USB cable back to Media Connector • S tatus light turns white to indicate USB disabled • R elease Audio Output button and system will reboot with disabled USB-C audio • Analog Audio Inputs are now active To enable USB Audio on your Media Connector • U nplug USB cable from Media Connector • Press and hold Audio Out button • P lug USB cable back to Media Connector • S tatus light turns blue to indicate USB-C is enabled • R elease Audio Out button and system will reboot with enabled USB-C audio • A nalog Audio Inputs are now inactive Input Power Status OutputTone Level Push AUDIO INPUT SELECTORLEVEL Audio Inputs Optical USB 5V / 0.2A Audio Inputs 3.5mm cable Analog Audio Plug your external audio equipment (e.g., video display) into one of the Audio input jacks. Adjust the volume as needed by pressing the Audio Input selector and adjusting the level knob as needed. Computer settings Once connected, open computer sound setting to select “Lightspeed Audio” as the microphone and speaker. SETTING THE VOLUME LEVELS For recording, or to interface with an Assistive Listening Device, connect a 3.5mm cable to the Audio Output of the Media Connector to the microphone input on the device. Press the button for the desired level adjustment. • Turn the knob to adjust volumes up or down for Audio Input/Output • To adjust the Tone (bass/treble) of the speaker, press Tone and use the adjustment knob to turn the bass up and down USB-C Input Power Status OutputTone Level Push 29 OPTIONAL ACCESSORIES Pairing Redcat to Media Connector Redcat S TATUS L IGHT Your system is shipped with microphones and base units pre-paired for quick and easy use. If, for any reason, you need to pair new components, follow this pairing process: PLEASE NOTE: Microphones should be out of the charger while pairing. CLEARMIKE With the microphone turned on, point the IR transmitter lens toward Redcat (for Sharemike, the transmitter lens is located on the back of the microphone). 1 Press and hold the Clearmike power button for 5 seconds until the status light on Redcat starts flashing, then release the button. At this point, the status light on Redcat will blink for 30 seconds. If after 30 seconds the status light blinks rapidly, you will need to start the pairing process again. 2 On the Media Connector, press and hold the Tone Selector button for 5 seconds to put it into pairing mode. When the status lights are solid on both Redcat and Media Connector, pairing is successful. 3 S TATUS LIGHT TONE SELECTOR BUTTON MEDIA CONNECTOR POWERIR TRANSMITTER Input Power Status OutputTone Level Push 30 OPTIONAL ACCESSORIES Audio Integration with Media Connector The Media Connector is designed to integrate multiple audio sources quickly and easily. Video Out MEDIA CONNECTOR REDCAT LAPTOP PROJECTOR Video Out Video In Audio Out Audio Out Audio Out Audio In INTERACTIVE DISPLAY PHONE OR TABLET TEACHER FLEXMIKE Input Power Status OutputTone Level Push Redcat Lightspeed Access transmission protocol 31 OPTIONAL ACCESSORIES Battery Pack for Redcat ADDING A BATTERY PACK TO REDCAT (PART # L14V) 1. Find and open the battery compartment by squeezing together the tabs located on each side of the compartment door. Remove and recycle door. 2. Place the battery pack into the compartment by squeezing together the tabs on either side of the b…

Text truncated - open the document above for the full version.

      ! "#$%&'()*+  , - . /0)1+0/" $$2 10*/301)24 56789:;<;=>=? @8A8B6CD EFF GHIJ67IEHKDEFF IKKIEHK LG7MEBIN67IEH6HAOP6CG67IEH5IPIKIEH QRS:T6UC6HAVICCKWE6A DECGFXI6YV5=<>R? Z[\]^Z_`abcdeefghfihjkklmknkopq ^]]rs\tZuvwxZ]y <z{I|M7K}88A~8JMHECE|I8K€‚ƒ„……†‡ˆ„‰Š‹ˆƒŒ‡‡ƒŽ‚„‚ƒƒ‡…‘ƒ‰’Œ“‚‡ˆ‚ „‚’Œ‡”„‡’‰‡ŽŽ’•‚‡Ž‰’€ˆ’–ƒŒƒ—Šƒ‡…‘ƒ‰…Œ’‚‡˜‡ƒ—Œ’‘Œƒˆƒ‡–‡‰•„‰ƒ‡…‘ƒ‰ 6G7MEBIN67IEH}GBKG6H77EK8J7IEH=z™>SEš7M8@DDBGC8Kz =z{I|M7 K}88A~8JMHECE|I8K€‚ƒ„……†‡ˆ„‰Š‹ˆƒŒ‡‡ƒŽ‚„‚ƒ—ƒ–‡ˆƒ—’ƒŽ‰’‚„–ƒ J›X8BK8JGBI7›6HA;EB6H7IœPIBGKKEš76B8}BEAGJ8AEB}BEPIA8AX›žnmŸl m¡¢wn£¤rq¥cEB 6H›EšI7KKGJJ8KKEBK6HA6KKI|H88KYIA8H7IšI8AEH7M8]p¦l lgwomkIHK76CC8AEH7M8A8PIJ8Y HEBICCI7X8IHK76CC8AX›7M86}}CIJ6H76H›7IF86š78BJ8B7IšIJ67IEHz Sz{I|M7 K}88A~8JMHECE|I8K€‚ƒ„……†‡ˆ„‰Š‹ˆƒŒ‡‡ƒŽ‚„‚ƒW@A8PIJ8omqpkn p§kl €…Œ’—ˆƒ—‡‰„’Œƒ‡•‰ˆ’‰Œ ̈Š© Rz{I|M7 K}88A~8JMHECE|I8K€‚ƒ„……†‡ˆ„‰Š‹ˆƒŒ‡‡ƒŽ7M67Y6KEš7M8A678Eš7M8šICIH|Eš7M8 6}}CIJ67IEHY7M86}}CIJ6H7omqpkoglqkoªolgpqk«l]p¦l lgwomk6K6H8H7I7›}BEAGJIH| €ˆ’–ƒŒƒ—Šƒ‡…‘ƒ‰„‰—omqpknqnªªo¬onklp m§£mogon ¢Eš6H8H7I7›IA8H7IšI8AEH7M8 DEP8B8A{IK7z ­IHJ8B8C› ›EGBKY ®6F89 VIU8@BEK7 ̄EX~I7C89­8HIEBOH|IH88B DEF}6H›®6F89{I|M7K}88A~8JMHECE|I8K

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 2/10/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: ORV-LSRCT FCC FRN: 0006242663 To whom it may concern: Lightspeed Technologies (“the applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Mike Frost Lightspeed Technologies 11509 SW Herman Road Tualatin, OR. 97206 [email protected] Sincerely yours, Mike Frost Lightspeed Technologies 11509 SW Herman Road Tualatin, OR. 97206 [email protected]

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 2/10/2026 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: ORV-LSRCT To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Best Regards Mike Frost Senior Engineer Lightspeed Technologies

Lightspeed Technologies, Inc. 11509 SW Herman Road Tualatin, OR 97062 lightspeed-tek.com 800.732.8999 Toll Free 503.684.3197 Fax Date: 2/10/2026 To whom it may concern: I, the undersigned, hereby authorize ElectroMagnetic Investigations, LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ElectroMagnetic Investigations, LLC on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing ElectroMagnetic Investigations, LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mike Frost Senior Engineer Lightspeed Technologies

RCT Product Photos – External and Internal Metal shield removed to show DECT Radio

1 2 DIMENSIONS ARE IN mm TOLERANCES: X 0.5 X.X 0.2 X.XX 0.1 X.XXX 0.05 ANGULAR 1 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. NUMBER WITHIN CIRCLE INDICATES ITEM NUMBER. SEE SHEET 1 BOM. 2. NUMBER IN TRIANGLE DESIGNATES A CHANGE PER THE ASSOCIATED REVISION 3. ALL COMPONENTS TO BE RoHS AND REACH COMPLIANT REVISIONS ZONEREVDESCRIPTIONDATEAPPROVED B1INITIAL RELEASE2026-01-28I. GRAVES ITEM NO.PART NUMBERDESCRIPTIONQTY. 1334-00022LABEL, NAMEPLATE, RCT1 2570-00013RCT, AS PURCHASED1 D C B A A B C D 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 DRAWN CHECKED DESIGNED DATENAME TITLE: SIZE B DWG. NO. REV SHEET 1 OF 1SCALE: 1:2 UNLESS OTHERWISE SPECIFIED: B1 11509 SW HERMAN RD TUALATIN, OR 97062 USA PHONE: 503.684.5538 WWW.LIGHTSPEED-TEK.COM 02-RCT-A 02-RCT-A INTERPRET GEOMETRIC TOLERANCING PER: ASME Y14.5-2018 THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LIGHTSPEED TECHNOLOGIES INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LIGHTSPEED TECHNOLOGIES INC IS PROHIBITED. 2026-01-28 2026-01-28 2026-01-28 IG IG ZH

D1 Zach Heise REV A1 Release - Initial Release 1:1 LABEL, NAMEPLATE, RCT Part Number: Desc: 334-00022 Notes: 1.Material: Brady B-8115B or approved equivalent A.BASE MATERIAL, ADHESIVE, INK, ANY FINISH OR FACING OVERLAMINATE MATERIAL SHALL SATISFY UL 969-PGDQ2 2.Color: A.Label: Black B.Text: White 3.Corner Radii: 2.8mm 4x 4.ALL UNDIMENSIONED FEATURES TO BE +/- 0.5 mm ZEH 15 May 2025 REV B1 - decreased nominal dimensions and increased tolerances ZEH 31 JUL 2025 REV C1 - corrected circle R location ZEH 15AUG 2025 REV D1 - remove ‘SAMPLE’ mark. Add regulatory marks ZEH 29 JAN 2026 FCC ID: ORV-LSRCT IC: 1732B-LSRCT Input: 24VDC / 1.75A Lightspeed Technologies, Inc. www.lightspeed-tek.com 800.732.8999 MODEL: RCT Made in Malaysia 77 mm 21 mm

RCT Product Photos – External and Internal Metal shield removed to show DECT Radio

1. Purpose This report evaluates the RF exposure of the RCT base station. This report follows the calculations outlined in OET bulletin 65, Edition 97-01. 2. References • RSS-102 issue 6 • FCC 47 CFR Part 1, section 1.310 • FCC KDB 447498 DO1, RF Exposure Procedures and Equipment Authorization Polices for Mobile and Portable Devices, V6 • OET bulletin 65, Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields, Edition 97-01 3. Equipment Description Description: DECT Base Station Model: RCT Additional Model(s): None Brand Name(s): Lightspeed Corporation Serial Number: 02-RCT-Z-P2542-00007 HW version: Rev A FW Version: 7.1.12 FCC ID: ORV-LSRCT IC: 1732B-LSRCT Equipment type: End Product 3.1. Radiation Sources Mode Description UPCS Frequency Range 1921.536 – 1928.448 MHz Channels 5 Modulations GFSK Max Conducted power [dBm] 11.31 Antenna gain [dBi] 7.117 4. Rf Exposure Classification Threshold calculation FCC FCC Limits – General Population / Uncontrolled Exposure Frequency range [MHz] Electric field strength [V/M] Magnetic field strength [A/M] Power density [mW/cm^2 ] Averaging time [min] 0.3 - 1.34 614 1.63 100 30 1.34 - 30 842/f 2.19 / f 180 / f^2 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 N/A N/A f / 1500 30 1500 - 100000 N/A N/A 1 30 Threshold calculation RSS-102 Issue 6 5. Assessment OET bulletin 65 uses the following equation to predict the strength of an RF field at a given distance: The results of the assessment are shown below: Threshold calculation, FCC Assessment Results Variable Value Unit Assessment frequency (f) 1928.448 MHz FCC Limit 1 W/m^2 Peak Conducted Power (P) 11.31 dBm 13.52 mW Peak Antenna Gain (G) 7.117 dBi 5.22 Distance (R) 20 cm Power Density (S) 0.14 W/m^2 The power density of the EUT at 20cm is below the FCC limit. Threshold calculation, RSS-102 issue 6 separation distance 200 mm frequency 1928.448 MHz Threshold 2.24 W EUT Output Power Assessment Results Max power 11.31 dBm Antenna gain 7.117 dBi Power for RF Exposure 18.49 dBm 2.9 mW As EIRP is below Threshold the device is exempt from rf exposure evaluation.

EMI4019.05 Testing Report Page 1 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna Antenna Pattern and Antenna Gain Test Report Lightspeed Technologies, Inc RCT Antennas April 24, 2026 Tests Conducted by: ElectroMagnetic Investigations, LLC 8531 NE Cornell Road, Suite 600, Hillsboro, Oregon 97124, USA Tele (503) 466-1160 [email protected] EMI4019.05 Testing Report Page 2 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna 1. Summary This document covers the RCT antenna specifications required for regulatory documentation. RCT (FP) device is a DECT Base station (FP) device. 2. Antenna Measurements Test Date: 2026/04/08 Tested by: Ryan Benitez Measured using replacement method. Equipment Model Calibration Due Date Reference antenna EMCO 3117 N/A Measurement antenna Compower AHA118 2026/08/21 Measurement analyzer Agilent E4440A 2026/06/18 Measurement Software Tile 7.6.0.14 N/A 3. RCT Antenna Specification The RCT is a DECT FP device and utilizes DECT antenna diversity with a Antenna. 4. Physical Description The antenna is a bent monopole antenna tuned for ~1.9 GHz frequencies. 5. Frequency Range The antenna design is optimized for DECT US carrier frequencies. • DECT US: 1.92 GHz to 1.93 GHz (5 carriers) EMI4019.05 Testing Report Page 3 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna 6. Antenna Gain Ant 0: Max gain: 7.117 dBi 1.921536 GHz 1.924992 GHz 1.928448 GHz Horizontal Gain (dBi) 6.952 6.766 7.117 Vertical Gain (dBi) 6.354 6.170 7.117 Flat Gain (dBi) 5.630 5.594 5.677 Ant 1: Max gain: 7.968 dBi 1.921536 GHz 1.924992 GHz 1.928448 GHz Horizontal Gain (dBi) 7.518 7.906 7.968 Vertical Gain (dBi) 6.834 7.217 7.292 Flat Gain (dBi) 3.730 3.834 3.724 7. Antenna Drawings EMI4019.05 Testing Report Page 4 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna 8. Setup Photo EMI4019.05 Testing Report Page 5 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna 9. Antenna Pattern Ant 0: -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.921536 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.924992 GHz EMI4019.05 Testing Report Page 6 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.928448 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.921536 GHz EMI4019.05 Testing Report Page 7 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.924992 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.928448 GHz EMI4019.05 Testing Report Page 8 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Flat 1.921536 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Flat 1.924992 GHz EMI4019.05 Testing Report Page 9 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Flat 1.928448 GHz EMI4019.05 Testing Report Page 10 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna Ant 1: -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.921536 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.924992 GHz EMI4019.05 Testing Report Page 11 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Horizontal 1.928448 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.921536 GHz EMI4019.05 Testing Report Page 12 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.924992 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Vertical 1.928448 GHz EMI4019.05 Testing Report Page 13 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Flat 1.921536 GHz -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Flat 1.924992 GHz EMI4019.05 Testing Report Page 14 of 14 Report_LIG20250930 ElectroMagnetic Investigations RCT Antenna -40 -30 -20 -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220…

Text truncated - open the document above for the full version.

EMI4019.05 Testing Report Page 1 of 104 LIG20250930 ElectroMagnetic Investigations RCT FCC (USA)/ISED (Canada) TEST REPORT FCC 47 CFR Part 15D Unlicensed Personal Communications Service Devices Industry Canada RSS-213 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) EMI4019.05 Testing Report Page 2 of 104 LIG20250930 ElectroMagnetic Investigations RCT Report Reference No: LIG20250930 Testing Laboratory: ElectroMagnetic Investigations, LLC Address: 8531 NE Cornell Road. Suite 600, Hillsboro, OR, USA Accreditation: A2LA Ac…

Text truncated - open the document above for the full version.