OU9LS405-B01BLUETOOTH PEDOMETER WITH 2.4 GHZ AS CARRIER

version:1.0 GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China TEL:86-760-88282982 www.transtek.cn User Manual Bluetooth Pedometer LS405-B Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems. Thank you very much for selecting the Transtek Bluetooth Pedometer LS405-B. 2865 FCC ID: OU9LS405-B01 1 Table of Contents Table of Contents Overview Device Components Initial Start-Up General Instructions Install the App and Pair-up Start Measuring How to Use Troubleshooting Specifications Maintenance Warranty 3 3 6 8 11-12 13 14 14 ................................................................................................................. ................................................................................................................. ................................................................................................................... ............................................................................................................................. ............................................................................................................................ ............................................................................................................................... ...................................................................................................................................... ......................................................................................................... How to Charge the Power 5 ........................................................................................................... How to Wear the Pedometer 7 ........................................................... How to View the Data 9-10 ................................................................................................................ ............................................ Symbol Meaning Symbol Meaning 2 ................................................................................................................. OLED Display 4 ................................................................................................................. How to Turn on the Pedometer for Your First Use 5 ............................................................ Warning 14 ...................................................................................................................................... Pedometer Care 15 ........................................................................................................................ Built-in Battery Care 15 .................................................................................................................. Health Disclaimer 15 ....................................................................................................................... Other Notes 15 ................................................................................................................................ FCC Statement 16 ............................................................................................................................. 23 List 1. Bluetooth Pedometer LS405-B (including Polymer Lithium Battery) 2. User Manual OverviewSymbol Meaning General Instructions Device Components The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury. Please kindly find the meanings of the warning signs and symbols, which you may encounter in the label and user manual, as follows: Symbol Meaning Transtek Bluetooth Pedometer LS405-B is used for measuring the walking steps, distance and the consumed calories. This device has bluetooth 4.0 technology, the user can set the time and unit etc. through the bluetooth, and then download the information to the pedometer. The data in the pedometer also can be uploaded to the device which supports the Bluetooth 4.0 technology. So the user can check it at anytime. Main Features: a. support the Bluetooth 4.0 technology b. OLED display c. keep a record of the measuring data during 7 days, keep a record for every 5 minutes if there has some changes d. display walking steps, walking distance, the consumed calories and the current time 2865 OLED Display Button Wrist Band Charging Icon USB Interface Wrist Band Symbol for “THE OPERATION GUIDE MUST BE READ” Symbol for “MANUFACTURER” Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice” Symbol for “DIRECT CURRENT” Symbol for “MANUFACTURE DATE” The Bluetooth Combination Mark Symbol for “COMPLIES WITH FCC RULES” Symbol for “COMPLIES WITH EU REQUIREMENTS” 5 4 OLED Display How to Charge the Power When the OLED displays the following symbol, it reminds you to charge the power at once. Connect the USB interface with the computer to finish the charging. When the device is charging the power, the OLED will display as the following picture. The power symbol blinks. The OLED displays as the following picture, it means the charging is complete. Initial Start-Up Steps The Walking Distance The Consumed Calorie (kcal) 0 0.00 17:00 0.0 The Current Time Overview How to Turn on the Pedometer for Your First Use If it’s the first time for you to use it, you press the button shortly,and there is no display on OLED , this because the device didn’t logout the shipping mode. Please press and hold the button for 5 seconds, then the device will recover to the normal mode. CAUTION Note: (1) When the device is in the shipping mode, if you charge the power, it will divert to the normal mode, then you can start your measuremen…

Text truncated - open the document above for the full version.

External Photo

1:1 Position： SN :XXXXXXXXXXXXXXXX Made In China 2014-05 FCC ID: OU9LS405-B01 Dimension：30(L)X12(W)mm,Thickness：0.1mm label LS405-B Colour：black text with silver background Material：adhesive label with water proof Bluetooth Pedometer Model: LS405-B Power Supply: 3.7V/70mAh Polymer Lithium Battery This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may caouse undesired operation. Zone A, 5/F., Investment Building, No. 12 Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China Guangdong Transtek Medical Electronics Co., Ltd SN :XXXXXXXXXXXXXXXX Made In China 2014-05 FCC ID: OU9LS405-B01 Bluetooth Pedometer Model: LS405-B Power Supply: 3.7V/70mAh Polymer Lithium Battery This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may caouse undesired operation. Zone A, 5/F., Investment Building, No. 12 Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China Guangdong Transtek Medical Electronics Co., Ltd

Internal Photo

SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1403000934RF Page: 1 of 1 FCC ID: OU9LS405-B01 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.1091&2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below: Transmit frequency (GHz) Max Conducted Output Power (mW) SAR Test Exclusion Threshold (mW) 2.402 1.035 9.7 2.442 0.973 9.6 2.480 0.906 9.5 The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (D01) General RF Exposure Guidance v05, the SAR report is not required.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM140300093401 Page: 1 of 55 FCC ID: OU9LS405-B01 Authorized Signature: Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1403000934RF Applicant: Guangdong Transtek Medical Electronics Co.,Ltd FCC ID: OU9LS405-B01 Product Name: Activity-Tracker Product Description: Bluetooth Pedometer with 2.4 GHz as carrier Model No.: LS405-B Trade mark: Transtek Standards: CFR 47 FCC PART 15 SUBPART C:2013 section 15.247 Date of Receipt: 2014-03-21 Date of Test: 2014-03-21 to 2014-03-28 Date of Issue: 2014-03-31 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140300093401 Page: 2 of 55 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-03-31 Original Authorized for issue by: Tested By 2014-03-21 to 2014-03-28 (Daniel He) /Signature Date Prepared By 2014-03-31 (Daniel He) /Signature Date Checked By 2014-03-31 (Storm Shu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140300093401 Page: 3 of 55 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary TEST TEST REQUIREMENT TEST METHOD RESULT Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PASS 6 dB Bandwidth FCC PART 15 C section 15.247 (a)(2) ANSI C63.10: Clause 6.9.1 PASS Maximum Peak Output Power FCC PART 15 C section 15…

Text truncated - open the document above for the full version.

Test setup Photo 1.1 RADI ATE D SP URI OU S EM ISSIO N TE ST SETUP Below 1GHz: Above 1GHz: (full anechoic chamber)