OU9LS802-E02Blood Pressure Monitor

User Manual Blood Pressure Monitor LS802-E To use the monitor correctly and safely, please read the manual thoroughly. Thank you very much for selecting TRANSTEK Blood Pressure Monitor LS802-E. please keep well this manual in order to reference in future. Arm Type Version:1.0 FCC ID:OU9LS802-E02 GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO.,LTD Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China CATALOGUE 1 Table of Contents CATALOGUE INTRODUCTION..............................................................................................................................2 General Description Safety Information LCD Display Signal Monitor Components BEFORE YOU START......................................................................................................................6 The Choice of Power Supply Installing and Replacing the Batteries MEASUREMENT..............................................................................................................................8 Tie the Cuff Start the Measurement INFORMATION FOR USER ...........................................................................................................10 Tips for measurement Maintenances ABOUT BLOOD PRESSURE.........................................................................................................12 What are systolic pressure and diastolic pressure? What is the standard blood pressure classification? Why my blood pressure is varies even in one day? Why the blood pressure I get from the hospital is different from home? If the result is the same if measuring on the right arm? TROUBLESHOOTING...................................................................................................................14 SPECIFICATIONS..........................................................................................................................15 AUTHORIZED COMPONENTS ....................................................................................................16 CONTACT INFORMATION.............................................................................................................16 FCC STATEMENT...........................................................................................................................17 COMPLIED STANDARDS LIST .....................................................................................................18 EMC GUIDANCE............................................................................................................................19 The below signs might be in the user manual, labeling or other component. they are the requirement of standard and using. Safety Information INTRODUCTIONINTRODUCTION 23 Thank you for selecting TRANSTEK arm type blood pressure Monitor (LS802-E). The monitor features blood pressure measurement, pulse rate measurement and the the result storage. The design provides you with two years of reliable service. Reading taken by the LS802-E are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method. This manual contains important safety and care information, and provides step by step instruction for using the product. Read the manual thoroughly before using the product. Features: 92*78mm Blue LCD display with white backlight Maximum 60 records per each user Measuring during inflation technology General Description T1A/250V Φ3.6*10CCC F1 For indoor use only Symbol for “MANUFACTURER” Symbol for “SERIAL NUMBER” Symbol for “TYPE BF APPLIED PARTS” Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. Please follow local guidelines.” Symbol for “DIRECT CURRENT” Symbol for “Class II Equipment” Symbol for “THE OPERATION GUIDE MUST BE READ” Symbol for “MANUFACTURE DATE” This device is intended for adult use only. This device is intended for no-invasive measuring and monitoring of arterial blood pressure. It is not intended for use on extremities other than the arm or for functions other than obtaining a blood pressure measurement. Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure.Do not begin or end medical treatment based solely physician for treatment advice. If you are taking medication,consult your physician to determine the most appropriate time to measure your blood pressure. Never change a prescribed medication without consulting your Physician. When the device was used to measure patients who have common arrhythmias such as atrial or ventricular premature beats or artrial fibrillation, the best result may occure deviation. Please consult your physician about the result. If the cuff pressure exceeds 40 kPa (300 mmHg), the unit will automatically deflate. Should the cuff not deflate when pressures exceeds 40 kPa (300 mmHg), detach the cuff from the armand press the START/STOP button to stop inflation. The equipment is not AP/APG equipment and not suitable for use in the presence of a flammable anesthetic mixture with air of with oxygen or nitrous oxide. The operator shall not touch output of batteries /adapter and the patient simultaneously. To avoid measurement errors, please avoid the condition of strong electromagnetic field radiated interference signal or electrical fast transient/burst signal. The user must check that the equipment functions safely and see that it is in proper working condition before being used. This device is contraindicated for any female who may be suspected of, or is pregnant. Besides provided inaccurate readings, the affects of this device on the fetus are unknown. Manufacturer will make available on request circuit diagrams, component parts list etc. This unit is not suitable for continuous monitoring during medical emergencies or operations. Otherwise, the patient’s arm and fingers will become anaesthetic, swollen and even purple due to a lack of blood. Pleas…

Text truncated - open the document above for the full version.

External Photo

Dimension(Label)62*30mm; Thickness0.2mm label LS802-E Colourblack text with silver background Materialadhesive label with water proof Rating: Battery powered mode: 4×AA alkaline batteries, 6V AC adaptor powered mode: 100-240V~, 400mA (Can be supplied by AC adaptor model UE08WCP-060100SPA only!) SN Model:LS802-E FCC ID: OU9LS802-E02 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD Zone A, 5/F., Investment Building, No. 12 Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, 528437, China 2014-07

Internal Photo

Components Comment Quantity L1 100NH 1 C2 10nF 1 C1 C4 1uF 2 C5 2.2uF 1 C3 220pF 1 C6 22pF 1 Y1 30MHz 1 C11 47pF 1 L5 11NH 1 C9 6.8pF 1 L3 12NH 1 L2 0.22uH 1 C8 3.3pF 1 C7 3.6pF 1 U1 SI4431 1

Level Name Specification Qty. Position Unit 0 BPM Module B1070-P(LS802-E ， 915MHZ) 1 PCBA KB-1070 1 PCS 2 PCB KB-1070,single side fiberglass panel,gold plated,94.5*14*1.6mm 1 Key PCB PCS 2 SMD Switch 6*6*4.3 SMD(2.0N) 3 USER1,USER2,GUEST PCS 1 PCBA B1070-P(915MHZ with backlight) 1 PCS 2 PCB TMB1070-2,double sides fiberglass panel,goldplated,96.5*56*1.2mm 1 PCS 2 SMD Safety Resistance FSMD050-1206,500mA 1 F1 PCS 2 SMD Resistance 0603;0R;1/10W,±5% 2 R4 R8 PCS 2 SMD Resistance 0805,4.7R,1/8W,±5% 1 R34 PCS 2 SMD Resistance 0603,22R,1/10W,±5% 2 R6 R7 PCS 2 SMD Resistance 0603,2KR,1/10W ， ±5% 1 R5 PCS 2 SMD Resistance 0603,4.7KR,1/10W ， ±5% 3 R1 R2 R3 PCS 2 SMD Resistance 0603,5.1KR,1/10W ， ±5% 1 R16 PCS 2 SMD Resistance 0603;10KR;1/10W,±5% 3 R33 R39 R40 PCS 2 SMD Resistance 0603;100KR;1/10W,±5% 5 R12 R30 R31 R32 R42 PCS 2 SMD Resistance 0603;1.2MR;1/10W,±1% 1 R11 PCS 2 SMD Resistance 0603;1.5MR;1/10W,±1% 1 R10 PCS 2 SMD Capacitance 0603;25P;50V,±5% 2 C28 C34 PCS 2 SMD Capacitance 0603;103;50V,±20% 1 C27 PCS 2 SMD Capacitance 0603;104;50V,+80%~-20% 10 C3-C5 C13 C17-C19 C21 C23 C51 PCS 2 SMD Capacitance 0805;104;50V,+80%~-20% 2 C2 C12 PCS 2 SMD Capacitance 0603;105;16V,+80%~-20% 1 C22 PCS 2 SMD Capacitance 0805;105;25V,+80%~-20% 2 C47 C50 PCS 2 SMD Capacitance 0805,4.7uF,10V,+80%~-20% 1 C26 PCS 2 SMD Electrolytic Capacitance 10UF,4*5.4mm,16V,±20% 1 C11 PCS 2 SMD Diode M1,D0214AC 2 D1 D2 PCS 2 SMD Triode MMBT9012,SOT-23 1 Q7 PCS 2 SMD Triode MMBT9013,SOT-23 1 Q6 PCS 2 SMD MOSFET MEM2301XG,SOT-23 1 Q3 PCS 2 SMD IC MD7533;SOT-89 1 ICI PCS 2 MCU MB95F318E,DICE 1 IC2 PCS 2 SMD E2PROM 24C16;SO-8 1 IC4 PCS 2 SMD IC ULN2001D,SOP8 1 IC5 PCS 2 SMD IC HY3116-MSOP10 1 IC6 PCS 2 Pressure Sensor MPS3117-006G ， 5.8PSI(SMD) 1 IS01 PCS 2 SMD Resistance 0603;6.8KR;1/10W,±5% 2 R13 R14 PCS 1 2-pins Cable 30# Red Black L=150±5mm 2 VB POWER,PUMP PCS 1 3-pins Cable 30# Red Blue Black 100±5mm 1 DC Socket line PCS 1 DC Socket DC-015,2.0mm 1 DC PCS 1 LCD CY1072-9,HTN/Negative/Blue Film,VA:82*95.5mm,6:00angle,3.2V,16M 1 LCD Display PCS 1 Backlight Board BL-B1070-01W,white,113.5*85*2.8mm,line 35mm 1 BL+ BL- PCS 1 Valve JQF1-6A,20*15*13mm,DC6V 1 L2 PCS 1 Zebra ZE-B1070-02,58*7*2mm(Semiconducting,Conductive layer1.4mm) 1 PCS 1 Pump PUMP-928B,6V 1 MOTOR PCS 1 4-pins Cable 30# Black Blue White Yellow L=50±5mm 1 PCS 1 Electrolytic Capacitance 220UF,6*8mm,,16V,±20% 2 C1 C54 PCS 1 Crystal C-002RX,,32768Hz/±20ppm ， 12.5PF ， 2*6 1 X1 PCS 1 Gold Resistance 2.5KR,1/8W,±1%,25PPM 1 R44 PCS 1 Buzzer Φ18mm,AT-18T-4B,piezoelectric ceramic buzzer 1 BEEP PCS 1 30# Cable Black L=50±5mm 1 Buzzer line PCS 1 RF Module AW4431_915, 18*23*5mm 1 J2 PCS 1 Pin Header 40PIN,2MM gaps,Thick 2mm,length 8.7mm 0.25 PCS 1 Antenna Φ0.85mm, L=73.5±1.5mm,copper 1 915MHZ Antenna PCS 1 Electrolytic Capacitance 2.2UF;4*7mm ， 50V,±20% 1 C6 PCS

PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿ www.fineprint.com.cn

PDF 文件使用 "pdfFactory Pro" 试用版本创建 肀 www.fineprint.com.cn

PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿ www.fineprint.com.cn

PDF 文件使用 "pdfFactory Pro" 试用版本创建 耀 www.fineprint.com.cn

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM140400190701 Page: 1 of 34 FCC ID: OU9LS802-E02 Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1404001907ME Applicant: Guangdong Transtek Medical Electronics Co., Ltd FCC ID: OU9LS802-E02 Product Name: Blood Pressure Monitor Product Description: Blood Pressure Monitor with 915 MHz as carrier Model No.: LS802-E Trade mark: Transtek Standards: CFR 47 FCC PART 15 SUBPART C:2013 section 15.249 Date of Receipt: 2014-04-29 Date of Test: 2014-06-23 to 2014-07-08 Date of Issue: 2014-07-20 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140400190701 Page: 2 of 34 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-07-20 Original Authorized for issue by: Tested By 2011-01-27 to 2011-02-01 (Jack Liang) / Project Engineer Date Prepared By 2014-07-15 (Liky Chen) / Clerk Date Checked By 2014-07-20 (Fred Zhu) / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140400190701 Page: 3 of 34 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Test Requirement Test method Result Field Strength of Fundamental FCC PART 15 C section 15.249 (a) ANSI C63.10: Clause 6.6 PASS Field Strength of Unwanted Emissions FCC PART 15 C section 15.249 (a) section 15.249 (d) ANSI C63.10: Clause 6.4, 6.6 and 6.7 PASS Band Edges FCC PART 15 C section 15.249 (d) ANSI C63.10: Clause 6.9.2 PASS Occupied Bandwidth FCC PART 15 C section 15.215(c) ANS…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 RADI ATE D EM ISS IO N TEST SET UP Below 1G Above 1G: (full anechoic chamber) 1.2 CON DU CTED EM ISSI ON TEST SETUP