OVHCAM-RZ4WVantage Wireless Color Camera

Iteris Vantage Wireless System Installation Guide 4931005 Version 2.0 This device complies with part 15 of the FCC Rules: Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. 4931005, Version 2.0, June 2000, Made in USA. ©Copyright 2000, ITERIS. All rights reserved. Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of ITERIS. is prohibited by law and constitutes a punishable violation of the law. ITERIS provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. ITERIS may revise this publication from time to time without notice. ITERIS, Vantage, Vantage Edge are trademarks of ITERIS. All other company/product names are trademarks/registered trademarks of their respective holders. FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. Operation with non-approved equipment is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. INDUSTRY CANADA STATEMENT This device has been designed to operate with an antenna having a maximum gain of 2.15dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than the required for successful communication. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Document 4931005, Version 2.0iii Contents Introduction . ........................... 1 PurposeofThisGuide.........................1 IfYouNeedAssistance ........................1 OverviewofWirelessVideoImageDetection.......... 2 BenefitsofStandardandWirelessVIDS...............2 2.4GHzFMVideoTransmission...................3 BenefitsofUsingFM-BasedVideoTransmission .........3 CameraPower .............................4 ReceiverAntennaTypeandLocation ................5 OtherApplications...........................5 Single-Channelvs.Multi-ChannelReceivers ............6 Tools, Equipment, and Supplies Required for Installation . . . 8 RequiredToolsandEquipment ...................8 RequiredSupplies ...........................8 InstallingtheCameraandReceiverUnit ............10 BasicInstallationSteps ....................... 10 Mounting the Wireless Camera/Transmitter Unit . . . . . . . . 10 Connecting Power to the Wireless Camera/Transmitter Unit . 11 MountingtheAntenna ....................... 14 ConnectingtheAntennaPre-Amp................. 15 InstallingtheReceiverCoaxCable................. 17 CableTypes ......................... 17 InstallingCoaxConnectors................. 17 MakingConnectionsInsidetheCabinet.............. 21 Installing the Bias-T and Surge Protection Device . . . . 21 ivVantage Wireless System Installation Guide ReceiverUnitConnections .................24 InstallingaSignalSplitter..................25 DeterminingtheCameraTransmitterFrequency.........26 SettingtheReceiverFrequency ...................27 Setting the Frequency for Single-Channel Receivers . . . 27 Setting the Frequency for Multi-Channel Receivers . . . 28 TuningtheReceivingAntenna ...................29 AdjustingtheCameraFocusandFieldofView..........32 Troubleshooting..........................33 Specifications...........................34 VantageWirelessCameraSpecifications..............34 LMR-400CoaxCableSpecifications ................35 SurgeSuppressorSpecifications ..................36 SignalSplitterSpecifications.....................38 2Overview of Wireless Video Image DetectionVantage Wireless System Installation Guide Overview of Wireless Video Image Detection Any major city that relies on vehicle detection for its signal control system eventually experiences damage to traditional inductive loops due to roadway construction or pavement failure. Damage to inductive loops from road widening or re-surfacing projects can compromise the reliability of vehicle detection. Maintaining optimum traffic flow during construction can be difficult due to temporary striping and lane closures. Adverse weather conditions also impede repair of inductive loops and at times may delay repair activities for several months. During such times, intersections that rely on a failed inductive loop may g…

Text truncated - open the document above for the full version.

Scott McCutchan From: Scott McCutchan [[email protected]] Sent: Wednesday, January 23, 2008 4:41 PM To: '[email protected]' Cc: '[email protected]'; 'Jeff Klinger' Subject: FCC ID: OVHCAM-RZ4W 1/23/2008 Mr. Fujimoto: In order for processing of this certification application (FCC ID: OVHCAM-RZ4W) to continue, the following issue (s) will have to be addressed: 1) Please provide a signed TCB contract. 2) The individual signing the confidentiality request letter, authorization letter, single TCB submittal attestation letter, and the applicant contact listed on the application form, must be the same person associated with the FCC grantee code. Please either change the contact person associated with the grantee code, or update the letters listed above, along with the application form. 3) The authorization letter must either: list the specific individuals (by name) authorized to make representations on behalf of the applicant; or, state that anyone within the organization being authorized may make representations on behalf of the applicant. 4) On the external photos exhibit, a standard SMA connector is pictured, and it is stated that the device will be professionally installed. In order to for an antenna to have a standard connector based on the premise that the device will be professionally installed, the professional installation must be justified based on the following: (a) Application (or intended use) for the device (including a statement that it “must” (not “may) be professionally installed. (b) Installation requirements (c) Method of marketing the device (example: Marketing of the device is restricted to trade shows and trade publications) Please provide an attestation statement based on the three items above. 5) The operational description indicates that the device has a frequency range of 2400 MHz to 2480 MHz, which does not agree with the application form or test report. Please update the operational description to indicate the exact frequency range. 6) Please indicate compliance the voltage variation requirements contained in section 15.31(e) of the FCC rules. FYI: In the future, you must submit band-edge plots in addition to the tabular data. The item(s) indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Please upload responses and/or exhibits to the electronic filing website. Your correspondence number is OVHCAM-RZ4W-1. Best regards, Scott McCutchan Operations Manager Compatible Electronics TCB Please contact me if you have any questions. Best regards, Scott McCutchan Lab Manager Compatible Electronics, Inc. Silverado / Lake Forest Division (949) 589-0700 fax (949) 589-7700 [email protected] 1/23/2008

Untitled Documenthttp://celectronics.com/CorrespondenceByProject.asp?ProjectNumber=... 1 of 22/26/2008 9:16 AM Correspondence by Project Project Number: Correspondence Number Memo OVHCAM-RZ4W-1 1) Please provide a signed TCB contract. Response: Let me know if you still need one. 2) The individual signing the confidentiality request letter, authorization letter, single TCB submittal attestation letter, and the applicant contact listed on the application form, must be the same person associated with the FCC grantee code. Please either change the contact person associated with the grantee code, or update the letters listed above, along with the application form. Response: The Grantee code has been changed to show William Lee as the contact person. 3) The authorization letter must either: list the specific individuals (by name) authorized to make representations on behalf of the applicant; or, state that anyone within the organization being authorized may make representations on behalf of the applicant. Response: The Letter of Authority has been Revised. 4) On the external photos exhibit, a standard SMA connector is pictured, and it is stated that the device will be professionally installed. In order to for an antenna to have a standard connector based on the premise that the device will be professionally installed, the professional installation must be justified based on the following: (a) Application (or intended use) for the device (including a statement that it “must” (not “may) be professionally installed. (b) Installation requirements (c) Method of marketing the device (example: Marketing of the device is restricted to trade shows and trade 1201038915 Untitled Documenthttp://celectronics.com/CorrespondenceByProject.asp?ProjectNumber=... 2 of 22/26/2008 9:16 AM publications) Please provide an attestation statement based on the three items above. Respone: Please see the letter attached. 5) The operational description indicates that the device has a frequency range of 2400 MHz to 2480 MHz, which does not agree with the application form or test report. Please update the operational description to indicate the exact frequency range. Response: This has been updated and revised. 6. Please indicate compliance the voltage variation requirements contained in section 15.31(e) of the FCC rules. This has been uploaded

1700 Carnegie Avenue | Suite 100 | Santa Ana | CA | 92705-5551 | tel. 949.270.9400 | fax 949.270.9401 | www.iteris.com LABEL: This device complies with part 15 of the FCC rules Operation is subject to the following 2 conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 7532A-CAMRZ4W FCC ID: OVHCAM-RZ4W Vantage Wireless Cam RZ4WIteris Inc Bottom View FCC / IC Label Product Label Barcode Sun Shield Camera Body

Report Number: B71128A1 FCC Part 15 Subpart B and FCC Section 15.249 Test Report Vantage Wireless Color Camera Model: RC4CW Brea Division 114 Olinda Drive Brea, CA 92823 (714) 579-0500 Agoura Division 2337 Troutdale Drive Agoura, CA 91301 (818) 597-0600 Silverado Division 19121 El Toro Road Silverado, CA 92676 (949) 589-0700 Lake Forest Division 20621 Pascal Way Lake Forest, CA 92630 (949) 587-0400 Page 1 of 16 FCC PART 15, SUBPART B and C TEST REPORT for VANTAGE WIRELESS COLOR CAMERA MODEL: RC4CW Prepared for ITERIS, INC. 1700 CARNEGIE AVENUE, SUITE 100 SANTA ANA, CALIFORNIA 92705 Prepared by:_____________________ KYLE FUJIMOTO Approved by:____________________ JAMES ROSS COMPATIBLE ELECTRONICS INC. 114 OLINDA DRIVE BREA, CALIFORNIA 92823 (714) 579-0500 DATE: DECEMBER 20, 2007 REPORT APPENDICES TOTAL BODY A B C D E PAGES 16 2 2 2 17 17 56 This report shall not be reproduced except in full, without the written approval of Compatible Electronics. Report Number: B71128A1 FCC Part 15 Subpart B and FCC Section 15.249 Test Report Vantage Wireless Color Camera Model: RC4CW Brea Division 114 Olinda Drive Brea, CA 92823 (714) 579-0500 Agoura Division 2337 Troutdale Drive Agoura, CA 91301 (818) 597-0600 Silverado Division 19121 El Toro Road Silverado, CA 92676 (949) 589-0700 Lake Forest Division 20621 Pascal Way Lake Forest, CA 92630 (949) 587-0400 Page 2 of 16 TABLE OF CONTENTS Section / Title PAGE GENERAL REPORT SUMMARY 4 SUMMARY OF TEST RESULTS 4 1. PURPOSE 5 2. ADMINISTRATIVE DATA 6 2.1 Location of Testing 6 2.2 Traceability Statement 6 2.3 Cognizant Personnel 6 2.4 Date Test Sample was Received 6 2.5 Disposition of the Test Sample 6 2.6 Abbreviations and Acronyms 6 3. APPLICABLE DOCUMENTS 7 4. DESCRIPTION OF TEST CONFIGURATION 8 4.1 Description Of Test Configuration - EMI 8 4.1.1 Cable Construction and Termination 9 5. LISTS OF EUT, ACCESSORIES AND TEST EQUIPMENT 10 5.1 EUT and Accessory List 10 5.2 EMI Test Equipment 11 6. TEST SITE DESCRIPTION 12 6.1 Test Facility Description 12 6.2 EUT Mounting, Bonding and Grounding 12 7. TEST PROCEDURES 13 7.1 RF Emissions 13 7.1.1 Conducted Emissions Test 13 7.1.2 Radiated Emissions (Spurious and Harmonics) Test 14 7.1.3 Radiated Emissions (Spurious and Harmonics) Test (Continued) 15 8. CONCLUSIONS 16 Report Number: B71128A1 FCC Part 15 Subpart B and FCC Section 15.249 Test Report Vantage Wireless Color Camera Model: RC4CW Brea Division 114 Olinda Drive Brea, CA 92823 (714) 579-0500 Agoura Division 2337 Troutdale Drive Agoura, CA 91301 (818) 597-0600 Silverado Division 19121 El Toro Road Silverado, CA 92676 (949) 589-0700 Lake Forest Division 20621 Pascal Way Lake Forest, CA 92630 (949) 587-0400 Page 3 of 16 LIST OF APPENDICES APPENDIX TITLE A Laboratory Recognitions B Modifications to the EUT C Additional Models Covered Under This Report D Diagrams, Charts, and Photos • Test Setup Diagrams • Radiated Emissions Photos • Antenna and Effective Gain Factors E Data Sheets LIST OF FIGURES FIGURE TITLE 1 Conducted Emissions Test Setup 2 Plot Map And Layout of 3 Meter Radiated Site Report Number: B71128A1 FCC Part 15 Subpart B and FCC Section 15.249 Test Report Vantage Wireless Color Camera Model: RC4CW Brea Division 114 Olinda Drive Brea, CA 92823 (714) 579-0500 Agoura Division 2337 Troutdale Drive Agoura, CA 91301 (818) 597-0600 Silverado Division 19121 El Toro Road Silverado, CA 92676 (949) 589-0700 Lake Forest Division 20621 Pascal Way Lake Forest, CA 92630 (949) 587-0400 Page 4 of 16 GENERAL REPORT SUMMARY This electromagnetic emission test report is generated by Compatible Electronics Inc., which is an independent testing and consulting firm. The test report is based on testing performed by Compatible Electronics personnel according to the measurement procedures described in the test specifications given below and in the "Test Procedures" section of this report. The measurement data and conclusions appearing herein relate only to the sample tested and this report may not be reproduced without the written permission of Compatible Electronics, unless done so in full. This report must not be used to claim product endorsement by NVLAP, NIST or any other agency of the U.S. Government. Device Tested: Vantage Wireless Color Camera Model: RC4CW P/N: 493446001 Product Description: See Expository Statement Modifications: The EUT was not modified in order to meet the specifications. Manufacturer: Iteris, Inc. 1700 Carnegie Avenue, Suite 100 Santa Ana, California 92705 Test Date: November 28, 2007 Test Specifications : EMI requirements CFR Title 47, Part 15 Subpart B; and Subpart C, Sections 15.205, 15.209 and 15.249 Test Procedure: ANSI C63.4 Test Deviations: The test procedure was not deviated from during the testing. SUMMARY OF TEST RESULTS TEST DESCRIPTION RESULTS 1 Conducted RF Emissions, 150 kHz – 30 MHz Complies with the Class B limits of CFR Title 47, Part 15, Subpart B; and Subpart C, section 15.207 2 Radiated RF Emissions, 10 kHz – 25000 MHz (Transmitter Portion) Complies with the limits of CFR Title 47, Part 15, Subpart C, section 15.205, 15.209, and 15.249. 3 Radiated RF Emissions, 10 kHz – 25000 MHz (Digital Portion) Complies with the Class B limits of CFR Title 47, Part 15, Subpart B. Report Number: B71128A1 FCC Part 15 Subpart B and FCC Section 15.249 Test Report Vantage Wireless Color Camera Model: RC4CW Brea Division 114 Olinda Drive Brea, CA 92823 (714) 579-0500 Agoura Division 2337 Troutdale Drive Agoura, CA 91301 (818) 597-0600 Silverado Division 19121 El Toro Road Silverado, CA 92676 (949) 589-0700 Lake Forest Division 20621 Pascal Way Lake Forest, CA 92630 (949) 587-0400 Page 5 of 16 1. PURPOSE This document is a qualification test report based on the Electromagnetic Interference (EMI) tests performed on the Vantage Wireless Color Camera, Model: RC4CW. The EMI measurements were performed according to the measurement procedure described in ANSI C63.4. The tests were performed in order to determine whether the electromagnetic emissions from the e…

Text truncated - open the document above for the full version.

HOW THE EUT MEETS THE REQUIREMENTS OF 15.31 (e) FOR THE ITERIS, INC. Vantage Wireless Color Camera FCC-ID: OVHCAM-RZ4W The fundamental was maximized on the Lab D test site using a normal test setup with the EUT’s AC Adapter connected directly to the AC public mains (115 Vac). Next, the EUT’s AC Adapter was then connected to the Staco Energy Products Variable Auto Transformer Model: 3PN1010. The Variable Auto Transformer allows the Vac input to be varied. The EUT’s AC Adapter was then connected to the Staco Energy Products Variable Auto Transformer Model: 3PN1010. The AC input was then dropped to 85% (97.75 Vac) and raised to 115% (132.25 Vac). The actual AC input was measured using a calibrated Fluke Multimeter Model: 87, Serial Number: 956410240, Calibration Due Date: February 16, 2008. The fundamental was then verified again to see that the amplitude did not change. Test Result: The EUT does NOT change amplitude at the fundamental when the AC input voltage is varied between 85% and 115% of the input nominal rated supply voltage.