OWDTR-0023-EPortable Radio Model P7100/P5100

Operator’s Manual MM101332V1 Rev. Fp2, June-04 P7100 IP Series Portable Radios REVISION HISTORY REV DATE DESCRIPTION R1A Mar 2003 Initial release R2A Jun 2003 Added UHF—H (4W) and P25 functionality R3A Feb 2004 Added UHF-L (4W) D Feb 2004 Added CE Mark and safety symbol conventions E May 2004 Improved detail in operating instructions F Jun 2004 Added RU101219V71-V73 coverage. NOTICE! This device is a RF transceiver intended for land mobile radio applications. The device may have use restrictions, which require that the national authority be contacted for any system licensing requirements, frequency use, allowable power level, etc. NOTICE! The software contained in this device is copyrighted by M/A-COM, Inc. Unpublished rights are reserved under the copyright laws of the United States. This device is made under license under one or more of the following U.S. Patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795. The voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into human-readable form. EDACS is a registered trademark and ProScan, ProSound, and Failsoft are trademarks of M/A- COM, Inc. All other product and brand names are trademarks, registered trademarks, or service marks of their respective holders. This manual is published by M/A-COM, Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM, Inc., at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of M/A-COM, Inc. Copyright © 2003-2004 M/A-COM, Inc. All rights reserved. 2 3 4 TABLE OF CONTENTS Page SAFETY TRAINING INFORMATION ............................................5 SAFETY CONVENTIONS ................................................................7 OPERATING TIPS ............................................................................8 BATTERY DISPOSAL....................................................................10 INTRODUCTION ............................................................................11 OPTIONS AND ACCESSORIES ....................................................12 USER INTERFACE .........................................................................14 CONVENTIONAL OPERATION ...................................................27 BASIC OPERATION .......................................................................28 TRUNKED OPERATION................................................................40 PROJECT 25 (P25) CONVENTIONAL OPERATION...................56 OPERATION FOLLOWING WATER CONTACT ........................59 CHANGING THE BATTERY PACK .............................................60 BATTERY WARRANTY ................................................................61 WARRANTY ...................................................................................62 SAFETY TRAINING INFORMATION WARNING The M/A-COM P7100 IP portable radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only,” meaning it must be used only during the course of employment by individuals aware of the hazards and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. The P7100 IP portable radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only.” In addition, this M/A-COM radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: • FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. • American National Standards Institute (C95.1 – 1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. • American National Standards Institute (C95.3 – 1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields – RF and Microwave. RF EXPOSURE GUIDELINES CAUTION To ensure that exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause the FCC RF exposure limits to be exceeded. A proper antenna is the antenna supplied with this radio by M/A-COM or an antenna specifically authorized by M/A-COM for use with this radio. (Refer to Table 2: Options and Accessories) • DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX” indicator appears in the display. The radio will transmit by pressing the “PTT” (Push-To-Talk) button. 5 6 • Always transmit using low power (refer to High/Low Power Adjustment section) when possible. In addition to conserving battery charge, low power can reduce RF exposure. • ALWAYS use M/A-COM authorized accessories (antennas, batteries, belt clips, speaker/mics, etc). Use of unauthorized accessories may cause the FCC Occupational/Controlled Exposure RF compliance requirements to be e…

Text truncated - open the document above for the full version.

M/A-COM, Inc. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Telephone: 434.455.9527 FAX: 434.455.6851 [email protected] www.macom.com June 17, 2004 American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Subject: FCC ID: OWDTR-0023-E Original submission CONFIDENTIALITY M/A-COM, Inc. wishes to submit this confidentiality letter for the record on FCC ID: OWDTR-0023-E portable radio. M/A-COM, Inc. is requesting that schematic diagrams, parts lists, block diagrams, tune up procedure, and operational descriptions for this original submission not be made routinely available for public inspection. M/A-COM, Inc. considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457 and Section 0.459 of the FCC rules. Thank you for your attention to this matter. Daryl Popowitch Regulatory Manager Engineering Project Manager M/A-COM, Inc. – Lynchburg, VA

M/A-COM, Inc. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Telephone: 434.455.9527 FAX: 434.455.6851 [email protected] www.macom.com June 17, 2004 To Whom It May Concern: The following organization is granted authority to act on M/A-COM’s behalf, to file technical reports, measurements, and forms for M/A-COM equipment with FCC ID: OWDTR-0023-E, P7100 800 MHz portable radio, as it applies to a new submission and EA Grant. Ms. Kathy Grzovic Rhein Tech Laboratories, Inc. 360 Herndon Parkway, Suite 1400 Herndon, VA 20170 We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Sincerely, Daryl Popowitch Regulatory Manager, Engineering Project Manager

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 2, 2004 RE: FCC ID: OWDTR-0023-E_ATCB001457 Attention: Rick McMurray / Kathy Grzovic I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that page 6 of the report states the device is to be held 2 inches from the face and page 8 of the report says the device is to be 3 inches from the face. Please explain and please be consistent in the documentation. 2. Please note that the tables on pages 18 and 19 of the report are confusing. Please note that when measuring the ERP of radiated Spurious emissions you are to use the ERP of the device. While the end result is typically -13dBm, if -13dBm is not listed as the limit then the numbers do not match to what is supposed to be. For example in the first entry on page 18 you say the results are 48.12dBc. However since this is referenced to the conducted power, the margin stated is incorrect. 48.12dBc from the conducted power would be just at -13dBm and this then brings compliance into question. Also, the margin you state appears to be the result of subtracting the number you refer to as ‘dBc’ from the number you refer to as ‘antenna gain’. As it is unlikely that the substitution antenna gain is in the neighbor hood of 70+dB, it appears that the report has not stated the proper values and proper columns. Please correct the report to show all proper factors and please compare the results in the table to either -13dBm or dBc from the ERP values of the fundamental. 3. Please note that as this is a portable handheld transmitter under part 90, ERP must be measured for the fundamental. Please provide the necessary ERP of the device. 4. Please report the ERP power on the 731 form. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 2, 2004 RE: FCC ID: OWDTR-0023-E_ATCB001457 Attention: Rick McMurray / Kathy Grzovic I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that page 6 of the report states the device is to be held 2 inches from the face and page 8 of the report says the device is to be 3 inches from the face. Please explain and please be consistent in the documentation. Response : I am unable to locate the references you make. Please provide the file name, and the location of the 2” and 3” distances on the respective pages. 2. Please note that the tables on pages 18 and 19 of the report are confusing. Please note that when measuring the ERP of radiated Spurious emissions you are to use the ERP of the device. While the end result is typically -13 dBm, if -13dBm is not listed as the limit then the numbers do not match to what is supposed to be. For example in the first entry on page 18 you say the results are 48.12dBc. However since this is referenced to the conducted power, the margin stated is incorrect. 48.12dBc from the conducted power would be just at -13dBm and this then brings compliance into question. Also, the margin you state appears to be the result of subtracting the number you refer to as ‘dBc’ from the number you refer to as ‘antenna gain’. As it is unlikely that the substitution antenna gain is in the neighbor hood of 70+dB, it appears that the report has not stated the proper values and proper columns. Please correct the report to show all proper factors and please compare the results in the table to either -13dBm or dBc from the ERP values of the fundamental. Response : Please refer to the revised test report uploaded with this response. 3. Please note that as this is a portable handheld transmitter under part 90, ERP must be measured for the fundamental. Please provide the necessary ERP of the device. Response : Per our understanding of the FCC rules and regulations, and previous certifications, we are submitting conducted power for the power requirement per 2.1046. 4. Please report the ERP power on the 731 form. Response : Per our understanding of the FCC rules and regulations, and previous certifications, we are submitting conducted power for the power requirement per 2.1046. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 63 of 73 APPENDIX K: EXTERNAL PHOTOGRAPHS PHOTOGRAPH 3: FRONT VIEW OF EUT Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 64 of 73 PHOTOGRAPH 4: BACK VIEW OF EUT

Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 56 of 72 APPENDIX E: LABEL INFORMATION Please refer to the following page for a diagram of the label sample and label location.

Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 56 of 72 APPENDIX E: LABEL INFORMATION Please refer to the following pages for a sample of the FCC ID label and a diagram of its location on the EUT. FCC ID Label Sample

Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 64 of 72 APPENDIX L: INTERNAL PHOTOGRAPHS PHOTOGRAPH 3: VIEW OF REAR CASTING Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 65 of 72 PHOTOGRAPH 4: VIEW OF INSIDE OF FRONT COVER Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 66 of 72 PHOTOGRAPH 5: VIEW OF TOP OF INTERFACE BOARD AND RF SHIELD Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 67 of 72 PHOTOGRAPH 6: VIEW OF TOP OF INTERFACE BOARD

Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 68 of 72 PHOTOGRAPH 7: VIEW OF BOTTOM OF INTERFACE BOARD Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 69 of 72 PHOTOGRAPH 8: VIEW OF TOP OF RF SHIELD WITH INTERFACE BOARD REMOVED Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 70 of 72 PHOTOGRAPH 9: VIEW OF TOP OF MAIN BOARD WITH RF SHIELD REMOVED Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 71 of 72 PHOTOGRAPH 10: VIEW OF BOTTOM OF MAIN BOARD Rhein Tech Laboratories Client: M/A COM, Inc. 360 Herndon Parkway Model: P7100 IP 800 MHz Portable Radio Suite 1400 Standards: FCC Part 90/IC RSS-119 Herndon, VA 20170 Report Number: 2004058 http://www.rheintech.com Date: June 21, 2004 72 of 72 PHOTOGRAPH 11: VIEW OF INSIDE WALL OF REAR CASTING WITH MAIN BOARD REMOVED

© 2004 Celltech Labs Inc. 1 of 39 Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation Celltech Labs Inc. declares under its sole responsibility that this wireless portable device has demonstrated compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01) and Industry Canada RSS-102, Issue 1 (Provisional) for the Occupational / Controlled Exposure environment. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. Russell W. Pipe Senior Compliance Technologist Celltech Labs Inc. DECLARATION OF COMPLIANCE SAR RF EXPOSURE EVALUATION Test Lab CELLTECH LABS INC. Testing and Engineering Services 1955 Moss Court Kelowna, B.C. Canada V1Y 9L3 Phone: 250-448-7047 Fax: 250-448-7046 e-mail: [email protected] web site: www.celltechlabs.com Company Information M/A-COM, INC. P.O. Box 69011 Harrisburg, PA 17106 United States Rule Part(s): FCC 47 CFR §2.1093; IC RSS-102 Issue 1 (Provisional) Test Procedure(s): FCC OET Bulletin 65, Supplement C (Edition 01-01) FCC Device Classification: Licensed Non-Broadcast Transmitter Held to Face (TNF) Device Type: Portable FM PTT Radio Transceiver Part No.(s) Tested: RU101219V71 (P7100 Scan), RU101219V72 (P7100 System) Additional Part No.(s): RU101219V73 (P7100), RU101219V171 (P5100), RU101219V173 (P5100) FCC IDENTIFIER: OWDTR-0023-E Model(s): P7100IP Tx Frequency Range(s): 806-821 MHz (Repeater Input mode) / 821-824 MHz (NPSPAC, Repeater Input mode) 851-866 MHz (Talk-Around mode) / 866-869 MHz (NPSPAC, Talk-Around mode) Max. RF Output Power Tested: 3.35 Watts Conducted (815.5000 MHz) Antenna Type(s) Tested: Flexible Gain Antenna (P/N: KRE1011506/2) Whip Antenna (P/N: KRE1011223/01) Flexible Gain Antenna (P/N: KRE1011506/1) Battery Type(s) Tested: NiMH 7.5V - immersible - Intrinsically Safe (P/N: BKB191210/36) NiMH 7.5V - immersible - Non-Intrinsically Safe (P/N: BKB191210/34) NiCd 7.5V - immersible - Intrinsically Safe (P/N: BKB191210/35) NiCd 7.5V - immersible - Non-Intrinsically Safe (P/N: BKB191210/33) Additional Battery Type(s): NiMH 7.5V - wind driven rain - Intrinsically Safe (P/N: BKB191210/46) (Testing Not Required) NiMH 7.5V - wind driven rain - Non-Intrinsically Safe (P/N: BKB191210/44) NiCd 7.5V - wind driven rain - Intrinsically Safe (P/N: BKB191210/45) NiCd 7.5V - wind driven rain - Non-Intrinsically Safe (P/N: BKB191210/43) Body-Worn Accessories Tested: Speaker-Microphone Antenna Version Plus (P/N: KRY1011617/184) Speaker-Microphone Antenna Version Ruggedized (P/N: KRY1011617/384) Ranger Headset (P/N: OT-V4-10421), Behind-the-Head Headset (P/N: OT-V4-10450) Skull Microphone (P/N: OT-V4-10428), Throat Microphone (P/N: OT-V1-10656) Speaker-Microphone Non-Antenna Version (P/N: KRY1011617/183) Metal Belt-Clip (P/N: KRY1011647/1) Leather Belt Loop (P/N: KRY1011609/1) & Swivel-Mount Clip (P/N: KRY1011608/3) Leather Case (P/N: KRY1011639/1) & Leather Belt-Loop (P/N: KRY1011609/1) Nylon Case - black (P/N: KRY1011648/1) & Leather Belt-Loop (P/N: KRY1011609/1) Nylon T-Strap Holder (P/N: KRY1011656/1) Max. SAR Levels Measured: 1.84 W/kg Face-held (50% Duty Cycle) 6.47 W/kg Body-worn (50% Duty Cycle) © 2004 Celltech Labs Inc. 2 of 39 Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation TABLE OF CONTENTS 1.0 INTRODUCTION..................................................................... 3 2.0 DESCRIPTION OF DUT............................................................ 3-4 3.0 SAR MEASUREMENT SYSTEM................................................ 4 4.0 SAR COMPARISON................................................................. 6 4.0 MEASUREMENT SUMMARY..................................................... 7-22 5.0 DETAILS OF SAR EVALUATION............................................... 23 6.0 EVALUATION PROCEDURES................................................... 24 7.0 SYSTEM PERFORMANCE CHECK............................................ 25 8.0 SIMULATED EQUIVALENT TISSUES......................................... 26 9.0 SAR SAFETY LIMITS.............................................................. 26 10.0 ROBOT SYSTEM SPECIFICATIONS.......................................... 27 11.0 PROBE SPECIFICATION......................................................... 28 12.0 SAM PHANTOM V4.0C............................................................. 28 13.0 PLANAR PHANTOM................................................................ 28 14.0 DEVICE HOLDER.................................................................... 28 15.0 TEST EQUIPMENT LIST........................................................... 29 16.0 MEASUREMENT UNCERTAINTIES............................................ 30-31 17.0 REFERENCES........................................................................ 32 APPENDIX A - SAR MEASUREMENT DATA............................................. 33 APPENDIX B - SYSTEM PERFORMANCE CHECK DATA........................... 34 APPENDIX C - SYSTEM VALIDATION..................................................... 35 APPENDIX D - PROBE CALIBRATION.................................................... 36 APPENDIX E - MEASURED FLUID DIELECTRIC PARAMETERS................ 37 APPENDIX F - SAM PHANTOM…

Text truncated - open the document above for the full version.

© 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E 39 of 39 P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation APPENDIX G - SAR TEST SETUP & DUT PHOTOGRAPHS © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom Flexible Gain Antenna (P/N: KRE1011506/2) 2.5 cm 5.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom Whip Antenna (P/N: KRE1011223/01) 2.5 cm 5.3 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation 2.5 cm FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom Flexible Gain Antenna (P/N: KRE1011506/1) 5.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version Ruggedized (P/N: KRY1011617/384) Flexible Gain Antenna (P/N: KRE1011506/2) 2.5 cm 3.5 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version Ruggedized (P/N: KRY1011617/384) Whip Antenna (P/N: KRE1011223/01) 2.5 cm 3.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version Ruggedized (P/N: KRY1011617/384) Flexible Gain Antenna (P/N: KRE1011506/1) 2.5 cm 3.5 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version (P/N: KRY1011617/184) Flexible Gain Antenna (P/N: KRE1011506/2) 2.5 cm 3.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version (P/N: KRY1011617/184) Whi p Antenna (P/N: KRE1011223/01) 2.5 cm 3.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance to Planar Phantom Speaker-Microphone Antenna Version (P/N: KRY1011617/184) Flexible Gain Antenna (P/N: KRE1011506/1) 2.5 cm 3.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Metal Belt-Clip Separation Distance to Planar Phantom Metal Belt-Clip (P/N: KRY1011647/1) & Speaker-Microphone (P/N: KRY1011617/183) Accessories Flexible Gain Antenna (P/N: KRE1011506/2) 1.1 cm 2.0 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation 2.5 cm 1.1 cm BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Metal Belt-Clip Separation Distance to Planar Phantom Metal Belt-Clip (P/N: KRY1011647/1) & Speaker-Microphone (P/N: KRY1011617/183) Accessories Whi p Antenna (P/N: KRE1011223/01) © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation 1.1 cm 3.0 cm BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Metal Belt-Clip Separation Distance to Planar Phantom Metal Belt-Clip (P/N: KRY1011647/1) & Speaker-Microphone (P/N: KRY1011617/183) Accessories Flexible Gain Antenna (P/N: KRE1011506/1) © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 3.3 cm Leather Belt-Loop Separation Distance to Planar Phantom Leather Belt-Loop (P/N: KRY1011609/1) & Speaker-Microphone (P/N: KRY1011617/183) Accessories Flexible Gain Antenna (P/N: KRE1011506/2) 3.3 cm 4.5 cm © 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 3.3 cm Leather Belt-Loop Separation Distance to Planar Phantom Leather Belt-Loop (P/N: KRY1011609/1) & Speaker-Microphone (P/N: KRY1011617/183) Accessories W…

Text truncated - open the document above for the full version.

© 2004 Celltech Labs Inc. M/A-COM, Inc. FCC ID: OWDTR-0023-E 33 of 39 P7100IP Portable FM PTT Radio Transceiver Test Report S/N: 043004-503OWD Test Date(s): May 09-14, 16, 19-20, 2004 Test Type: FCC/IC SAR Evaluation APPENDIX A - SAR MEASUREMENT DATA © 2004 Celltech Labs Inc. M/A-…

Text truncated - open the document above for the full version.