OWDTR-0170-EXL-85M, 700/800MHZ Land Mobile Radio

L3HARRIS TECHNOLOGIES, INC. Public Safety Professional Communications Business Sector. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 w ww.l3h arris.com Authority to Act as Agent September 21, 2023 Element Materials Technology Washington DC LLC 7185 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We authorize Element Materials Technology Washington DC LLC to act on our behalf in all matters relating to this application for equipment authorization including the signing of all documents for this filing. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: November 21, 2024 By: Thomas D Camper, Jr. Title: Regulatory Manager On behalf of: L3Harris Technologies, Inc. Telephone: 434-851-3175

L3HARRIS TECHNOLOGIES, INC. Public Safety Professional Communications Business Sector. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 w ww.l3h arris.com US Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) Date: February 15, 2024 TO: Element Materials Technology Washington DC LLC Certification Body Division 7185 Oakland Mills Road Columbia, MD 21046 RE: FCC Certification - Per 47CFR §2.911(d)(7) This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant / US AGENT INFORMATION FCC Registration Number (FRN): 0004945812 Company Name: L3Harris Technologies, Inc., acting through its Public Safety Professional Communications Business Sector Grantee Code: OWD Contact Person: Mr. Thomas Camper, Jr. L3Harris PSPC Regulatory Manager Street Address: 221 Jefferson Ridge Parkway City/Province/Zip: Lynchburg, VA 24501 Telephone No: 434-455-6600 Email: [email protected] With a copy to: Company Name: L3Harris Technologies, Inc., acting through its Public Safety Professional Communications Business Sector Grantee Code: OWD Contact Name: Mr. Bryan Rowlands L3Harris PSPC Legal Department Street Address: 221 Jefferson Ridge Parkway City/Province/Zip: Lynchburg, VA 24501 Telephone No: 434-455-6600 Email: [email protected] 012623-17 Rev 2 Applicant Signatures: L3HARRIS TECHNOLOGIES, INC., acting through its Public Safety Professional Communications Business Sector By: Name: Thomas D. Camper, Jr. Title: L3Harris PSPC Regulatory Manager Date: F e b r u a r y 15, 2 0 2 4 L3HARRIS TECHNOLOGIES, INC., acting through its Public Safety Professional Communications Business Sector By: Name: Bryan K. Rowlands Title: Principal Senior Counsel Date: February 15, 2024

L3HARRIS TECHNOLOGIES, INC. Public Safety Professional Communications Business Sector. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 w ww.l3h arris.com FCC Equipment Authorization Application – Certification re Covered List Equipment L3Harris Technologies, Inc. acting through its Public Safety Professional Communications Business Sector 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Date: February 15, 2024 Element Materials Technology Washington DC LLC Certification Body Division 7185 Oakland Mills Road Columbia, MD 21046 To whom it may concern: RE: Covered List Equipment for FCC ID: OWDTR-0170-E Per 47 CRF Section 2.911(d)(5)(i) L3Harris Technologies, Inc., acting through its Public Safety Professional Communications Business Sector, (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization IS produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: N/A Per 47 CRF Section 2.911(d)(5)(ii) L3Harris Technologies, Inc., acting through its Public Safety Professional Communications Business Sector, (“the applicant”) certifies that, as of the date of the filing of the application, the applicant ☐ IS /  IS NOT identified on the Covered List as an entity producing “covered” equipment. Thank you, Signature Thomas D. Camper, Jr. L3Harris PSPC Regulatory Manager L3Harris Technologies, Inc.

L3HARRIS TECHNOLOGIES, INC. Public Safety Professional Communications Business Sector. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.l3h arris.com L3Harris Technologies, Inc. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Date: February 22, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: OWDTR-0170-E To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, L3Harris Technologies, Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give L3Harris Technologies, Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Long-Term and Short-Term Confidential exhibits are listed as follows: CONFIDENTIAL LIST Exhibit Description LONG-TERM 1 Block Diagram 2 Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Signature Thomas D. Camper, Jr. L3Harris Technologies, Inc. Title: Regulatory Manager

ID Label Samples and Location 1. XL-85M ID Label Samples Permanent adhesive permanently affixes the ID label to the device for its expected lifetime in the environment in which it will be operated. 2. XL-85M ID Label Location

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com RF Maximum Permissible Exposure (MPE) Report for Controlled and Uncontrolled Environments L3Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Model: XL-85M 7/800 MHz Land Mobile Radio FCC ID: OWDTR-0170-E IC: 3636B-0170 M arch 15, 2024 Report Prepared by: Daniel W. Baltzell D ocument Number: 2023033MPE This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and L3Harris Corporation. Test results relate only to the item tested. This report replaces DRAFT R0.5. T hese test(s) are accredited under Rhein Tech Laboratories, Inc. ISO/IEC 17025 accreditation issued by ANAB. Refer to certificate and scope of accreditation AT-1445. Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033MPE Page 2 of 13 Table of Contents 1 MPE Measurements and Applicable Regulations ............................................................................ 3 2 Modifications ........................................................................................................................................ 3 3 Test Laboratory .................................................................................................................................... 3 4 Test Dates ............................................................................................................................................. 3 5 Antenna Information ............................................................................................................................ 4 6 Test Equipment, Accessories and Test Setup .................................................................................. 4 7 Justification of Transmitting Mode and Frequency ......................................................................... 5 8 MPE Limits for the EUT ....................................................................................................................... 5 9 Calculating the Safe Distance from the EUT’s Antenna .................................................................. 7 10 Standard Test Conditions and Engineering Practices..................................................................... 8 11 Measurement Procedure ..................................................................................................................... 8 12 Test Results .......................................................................................................................................... 9 13 Conclusion ......................................................................................................................................... 13 Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033MPE Page 3 of 13 1 MPE Measurements and Applicable Regulations This test report presents the results of Maximum Permissible Exposure (MPE) measurements performed on the L3Harris Corporation XL-85M Mobile Radio, which operates in the 700 MHz and 800 MHz frequency bands, which were tested. The tests were performed in accordance with TCB training material and the following FCC Rules and Regulations and Industry Canada Radio Standard Specifications: • IEEE Std C95.1: 2019: “IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz – 300 GHz”, • IEEE Std C95.3: 2021: “IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz – 300 GHz”, • FCC OET Bulletin 65, Edition 97-01: “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields”, • FCC Supplement C to OET Bulletin 65, Edition 01-01: “Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emission,” • Subpart I, Part 1 of 47 CFR FCC Rules and Regulations, Edition 2-15-24: “Procedures Implementing the National Environmental Policy Act of 1969.” Specifically, Paragraph 1.1310: “Radiofrequency Radiation Exposure Limits”, • Subpart J, Part 2 of 47 CFR FCC Rules and Regulations, Edition 2-15-24: “Equipment Authorization Procedures.” Specifically, Paragraph 2.1091: “Radiofrequency Radiation Exposure Evaluation: Mobile Devices”, • RSS-102, Issue 6: Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) 2 Modifications No modifications were made to the EUT during testing. 3 Test Laboratory Testing was performed by RTL personnel at the Rhein Tech Laboratories (RTL) test facility located at 360 Herndon Parkway, Suite 1400, Herndon, VA, 20170,. Various regulatory bodies, including the FCC and ISED Canada, approved this facility for conducting tests and measurements on a contractual basis. CAB ID: US0079 4 Test Dates Testing was performed February 25 – 27, 2024. Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033MPE Page 4 of 13 5 Antenna Information The following antenna/mounts were tested for the MPE investigation. Description Gain (dBi) Antenna Part # Antenna, Element, 700/800 5.15 AN-225001-001 Antenna, Element, 800/900 7.15 14050-6611-01 Antenna, Yagi, 700 MHz 12.15 AN-025137-007 Antenna, Yagi, 800 MHz 12.15 AN-025137-008 6 Test Equipment, Accessories and Test Setup Test equipment used for the measurements is shown in Table 6-1. Table 6-1: Test Equipment RTL Asset Manufacturer Model Equi…

Text truncated - open the document above for the full version.

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com RF Exposure Report for Controlled and Uncontrolled Environments FCC Part 1.1307, 1.1310, 2.1091, 2.1093; IC RSS-102 L3Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Model: XL-85M 7/800 MHz Land Mobile Radio FCC ID: OWDTR-0170-E IC: 3636B-0170 April 11, 2024 Report Prepared by: Daniel W. Baltzell Document Number: 2023033RFE This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and L3Harris Corporation. Test results relate only to the item tested. This report replaces R1.1. These test(s) are accredited under Rhein Tech Laboratories, Inc. ISO/IEC 17025 accreditation issued by ANAB. Refer to certificate and scope of accreditation AT-1445. Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033RFE RF Exposure FCC Part 1.1307, 1.1310, 2.1091, 2.1093; IC RSS-102 MPE Calculations Including Co-location Considerations The maximum permissible RF exposure for an uncontrolled environment is specified in FCC 1.1310 Table 1B and RSS-102 Issue 6 Table 4. Table 1: RF Exposure Limits Technology Transmit Frequencies (MHz) Uncontrolled Exposure Controlled Exposure FCC Limit (mW/cm 2 ) ISED Limit (mW/cm 2 ) FCC Limit (mW/cm 2 ) ISED Limit (mW/cm 2 ) LMR 763 - 776 0.51 0.24 2.5 1.8 LMR 793 - 806 0.51 0.24 2.5 1.8 LMR 806 - 825 0.51 0.24 2.5 1.8 LMR 851 - 870 0.51 0.24 2.5 1.8 Bluetooth 2402 – 2480 1.0 0.54 5.0 3.2 2.4 GHz Wi-Fi 2412 – 2462 1.0 0.54 5.0 3.2 5 GHz Wi-Fi 5150 – 5825 1.0 0.90 5.0 4.6 Note: The lowest frequency of the above frequency ranges in the above produced the most conservative limit (when the limit is based on frequency) and was used to calculate the limits, where applicable. Table 2: LMR Antennas Antenna Type Part No. Frequency (MHz) Gain (dBi) Element, 700/800 MHz AN-225001-001 764-870 5.15 Element, 800/900 MHz 14050-6611-01 806-870 7.15 Yagi AN-025137-007 700 12.15 Yagi AN-025137-008 800 12.15 Table 3: Maximum Powers - Yagi Antennas Technology Transmit Frequencies (MHz) Duty Cycle (%) Max Conducted Power (W) Max Antenna Gain (dBi) Tune-up Adjustment (dB) Max EIRP (W) LMR 763 - 776 50 30 12.15 +1 626.8 LMR 793 - 806 50 30 12.15 +1 626.8 LMR 806 - 825 50 35 12.15 +1 731.3 LMR 851 - 870 50 35 12.15 +1 731.3 Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033RFE Page 3 of 5 Table 4: Calculated Minimum Safe Distance from LMR Antenna (based on Maximum Gain of Yagi Antennas) - Mobile Command Center applications Technology Transmit Frequencies (MHz) Uncontrolled Exposure Controlled Exposure United States (cm) Canada (cm) United States (cm) Canada (cm) LMR 763 - 776 313 457 142 167 LMR 793 - 806 313 457 142 167 LMR 806 - 825 338 493 153 180 LMR 851 - 870 338 493 153 180 Note: An MPE Report of the measured safe distance with the LMR antennas is included with the application. Table 5: Maximum Powers – 800/900 MHz Antenna - Highest Gain Technology Transmit Frequencies (MHz) Duty Cycle (%) Max Conducted Power (W) Max Antenna Gain (dBi) Tune-up Adjustment (dB) Max EIRP (W) LMR 763 - 776 50 30 7.15 +1 195.9 LMR 793 - 806 50 30 7.15 +1 195.9 LMR 806 - 825 50 35 7.15 +1 228.6 LMR 851 - 870 50 35 7.15 +1 228.6 Table 6: Calculated Minimum Safe Distance from LMR Antenna (based on Maximum Gain of 800/900 MHz Antenna) Technology Transmit Frequencies (MHz) Uncontrolled Exposure Controlled Exposure United States (cm) Canada (cm) United States (cm) Canada (cm) LMR 763 - 776 175 255 79 93 LMR 793 - 806 175 255 79 93 LMR 806 - 825 148 275 85 101 LMR 851 - 870 148 275 85 101 Note: An MPE Report of the measured safe distance with the LMR antennas is included with the application. Table 7: Maximum Powers – 700/800 MHz Antenna - Highest Gain Technology Transmit Frequencies (MHz) Duty Cycle (%) Max Conducted Power (W) Max Antenna Gain (dBi) Tune-up Adjustment (dB) Max EIRP (W) LMR 763 - 776 50 30 5.15 +1 123.6 LMR 793 - 806 50 30 5.15 +1 123.6 LMR 806 - 825 50 35 5.15 +1 144.2 LMR 851 - 870 50 35 5.15 +1 144.2 Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway, Suite 1400 Model: XL-85M Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033RFE Page 4 of 5 Table 8: Calculated Minimum Safe Distance from LMR Antenna (based on Maximum Gain of 700/800 MHz Antenna) Technology Transmit Frequencies (MHz) Uncontrolled Exposure Controlled Exposure United States (cm) Canada (cm) United States (cm) Canada (cm) LMR 763 - 776 140 205 64 75 LMR 793 - 806 140 205 64 75 LMR 806 - 825 150 219 67 80 LMR 851 - 870 150 219 67 80 Note: The application report includes an MPE Report of the measured safe distance with the LMR antennas. Table 9: Bluetooth and WiFi SAR Test Exclusion Max Channel Power Technology Transmit Frequencies (MHz) Channel Average Power (W) Worst-case Antenna Gain (dBi) Tune-up Tolerance (dB) Max Channel Power (W) Bluetooth 2402 – 2480 0.006 2 +1 0.008 2.4 GHz Wi-Fi 2412 – 2462 0.03 2 +1 0.038 5 GHz Wi-Fi 5150 – 5825 0.007 -0.2 +1 0.084 Note: To determine SAR exclusion, the average channel power measurement was adjusted with the 1 dB tune- up tolerance to determine the maximum channel power in the SAR exclusion calculation. Co-location Considerations This XL-85M radio configuration includes the Control Head and the radio's main body (VCH). The Control Head logic includes circuitry including serial communication, and its Keyboard contains a Bluetooth and Wi-Fi transceiver and a single antenna. The VCH includes the LMR transceiver circuitry, which uses an antenna some distance away from both the Control Head and the VCH, e.g., mo…

Text truncated - open the document above for the full version.

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com Certification Application Report FCC Part 15.247 & ISED RSS-247 Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689 0368 360 Herndon Parkway www.rheintech.com Suite 1400 Herndon, VA 20160 E-Mail: [email protected] Applicant: L3Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 USA FCC ID/ IC OWDTR-0170-E/ 3636B-0170 Test Report Date April 9, 2024 Platform N/A RTL Work Order # 2023033 Model / HVIN XL-85M / XLM-85M-7/8 RTL Quote Number QRTL23-033B American National Standard Institute ANSI C63.10-2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices FCC Classification DTS – Part 15 Digital Transmission System (Wi-Fi ) FCC Rule Part(s) FCC Rules Part 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz (10-01-21) ISED Standards RSS-247 Issue 3: Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5: General Requirements for Compliance of Radio Apparatus Frequency Range (MHz) Output Power (W) Peak Conducted Frequency Tolerance Emission Designator 2412 – 2462 0.141 N/A 17M5FXD 2422 – 2452 0.076 N/A 36M1FXD I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from, the applicable parts of FCC Part 2, FCC Part 15, ANSI C63.10, and ISED RSS-247 and RSS-Gen. Signature: Date: April 9, 2024 Typed/Printed Name: Desmond A. Fraser Position: President These tests are accredited and meet the requirements of ISO/IEC 17025 as verified by ANAB. Refer to certificate and scope of accreditation AT-1445. This report replaces R1.2. This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and L3Harris Corporation. The test results relate only to the item(s) tested. Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway Model / HVIN: XL-85M / XLM-85M-7/8 Suite 1400 Standards: FCC 15.247 & ISED RSS-247 Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033DTS Page 2 of 59 Table of Contents 1 General Information ................................................................................................................................. 5 1.1 Scope .......................................................................................................................................... 5 1.2 Description of EUT ...................................................................................................................... 5 1.3 Test Facility ................................................................................................................................. 5 1.4 Related Submittal(s)/Grant(s) ..................................................................................................... 5 1.5 Modifications ............................................................................................................................... 5 2 Test Information ....................................................................................................................................... 6 2.1 Description of Test Modes .......................................................................................................... 6 2.2 Exercising the EUT...................................................................................................................... 6 2.3 Test Result Summary .................................................................................................................. 6 2.4 Tested System Details ................................................................................................................ 6 2.5 Configuration of Tested System .................................................................................................. 7 3 Peak Output Power – FCC 15.247(b)(1); RSS-247 5.4(b), RSS-Gen 6.12............................................. 8 3.1 Power Output Test Procedure ..................................................................................................... 8 3.2 Power Output Test Results ......................................................................................................... 8 4 Compliance with the Band Edge – FCC 15.247(d); RSS-247 5.5 ......................................................... 10 4.1 Band Edge Test Procedure .......................................................................................................10 4.2 Restricted Band Edge Test Results ..........................................................................................10 4.3 Band Edge Plots........................................................................................................................11 5 Antenna Conducted Spurious Emissions – FCC 15.247(d); RSS-247 5.5, RSS-Gen 6.13 .................. 23 5.1 Antenna Conducted Spurious Emissions Test Procedures ......................................................23 5.2 Antenna Conducted Spurious Emissions Test Results.............................................................23 6 Bandwidths – FCC 15.247(a)(1); RSS-247 5.2(a); RSS-Gen 6.7 ......................................................... 24 6.1 Bandwidth Test Procedure ........................................................................................................24 6.2 Modulated Bandwidth Test Results...........................................................................................24 6.3 Bandwidth Plots.............................…

Text truncated - open the document above for the full version.

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com Certification Application Report FCC Part 15.247 & ISED RSS-247 Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689 0368 360 Herndon Parkway www.rheintech.com Suite 1400 Herndon, VA 20160 Applicant: L3Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 USA FCC ID/ IC OWDTR-0170-E/ 3636B-0170 Test Report Date April 16, 2024 Platform N/A RTL Work Order # 2023033 Model / HVIN XL-85M / XLM-85M-7/8 RTL Quote Number QRTL23-0 33B American National Standard Institute ANSI C63.10-2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices FCC Classification DTS – Part 15 Digital Transmission System (Wi-Fi ) FCC Rule Part(s) FCC Rules Part 15.247: Operation within the bands 902-92 8 MHz, 2400-2483.5 MHz and 5725-5850 MHz (10-01-21) ISED Standards RSS-247 Issue 3: Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5: General Requirements for Compliance of Radio Apparatus Frequency Range (MHz) Output Power (W) Peak Conducted Frequency Tolerance Emission Designator 2402 – 2480 0.005 N/A 759KFXD I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from, the applicable parts of FCC Part 2, FCC Part 15, ANSI C63.10, and ISED RSS-247 and RSS-Gen. Signature: Date: April 16, 2024 Typed/Printed Name: Desmond A. Fraser Position: President These tests are accredited and meet the requirements of ISO/IEC 17025 as verified by ANAB. Refer to certificate and scope of accreditation AT-1445. This report replaces R1.0. This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and L3Harris Corporation. The test results relate only to the item(s) tested. Rhein Tech Laboratories, Inc. Client: L3Harris Corporation 360 Herndon Parkway Model / HVIN: XL-85M / XLM-85M-7/8 Suite 1400 Standards: FCC 15.247 & ISED RSS-247 Herndon, VA 20170 ID’s: OWDTR-0170-E/3636B-0170 http://www.rheintech.com Report #: 2023033BLE Page 2 of 38 Table of Contents 1 General Information ................................................................................................................................. 5 1.1 Scope .......................................................................................................................................... 5 1.2 Description of EUT ...................................................................................................................... 5 1.3 Test Facility ................................................................................................................................. 5 1.4 Related Submittal(s)/Grant(s) ..................................................................................................... 5 1.5 Modifications ............................................................................................................................... 5 2 Test Information ....................................................................................................................................... 6 2.1 Description of Test Modes .......................................................................................................... 6 2.2 Exercising the EUT...................................................................................................................... 6 2.3 Test Result Summary .................................................................................................................. 6 2.4 Tested System Details ................................................................................................................ 6 2.5 Configuration of Tested System .................................................................................................. 7 3 Peak Output Power – FCC 15.247(b)(3); RSS-247 5.4(b), RSS-Gen 6.12............................................. 8 3.1 Power Output Test Procedure ..................................................................................................... 8 3.2 Power Output Test Results ......................................................................................................... 8 4 Compliance with the Band Edge – FCC 15.247(d); RSS-247 5.5 ......................................................... 12 4.1 Band Edge Test Procedure ..........................................................…

Text truncated - open the document above for the full version.