OWDTR-0167-EXL-90D 7/8/900 MHz Mobile Based Terminal Device

Product Manual 14221-6100-6000 November 2022 XL-90D Data Radio 700 MHz/800 MHz/900 MHz 14221-6100-6000 2 MANUAL REVISION HISTORY REV DATE REASON FOR CHANGE - Nov/22 Initial release. CREDITS L3Harris, Harris, and EDACS are registered trademarks of L3Harris Technologies. Conxall and Multi-Con-X are registered trademarks of Conxall Inc. Band-it is a registered trademark of BAND-IT-IDEX, Inc. A Unit of IDEX Corporation All other brand and product names are trademarks, registered trademarks, or service marks of their respective owners. NOTICE! The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S. Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations. Information and descriptions contained herein are the property of L3Harris Technologies. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of L3Harris Technologies, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501. Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty. This product conforms to the European Union WEEE Directive 2012/19/EU. Do not dispose of this product in a public landfill. Take it to a recycling center at the end of its life. This manual is published by L3Harris Technologies without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by L3Harris Technologies at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of L3Harris Technologies. Copyright © 2022, L3Harris Technologies. 14221-6100-6000 3 TABLE OF CONTENTS Section Page 1 REGULATORY AND SAFETY INFORMATION ..................................................................... 6 1.1 SAFETY SYMBOL CONVENTIONS ............................................................................ 6 1.2 REGULATORY APPROVALS ...................................................................................... 6 1.2.1 Transmitter ....................................................................................................... 6 1.2.2 Receiver ........................................................................................................... 6 1.2.3 FCC Compliance .............................................................................................. 7 1.2.4 Industry Canada ............................................................................................... 7 1.3 RF ENERGY EXPOSURE INFORMATION .................................................................. 8 1.3.1 Safety Training Information ............................................................................... 8 1.3.2 Contact Information .......................................................................................... 9 1.3.3 Occupational Safety Guidelines and Safety Training Information ...................... 9 1.4 DIVISION 2 NON-INCENDIVE PROTECTION ........................................................... 10 2 INTRODUCTION .................................................................................................................. 12 2.1 ABOUT THIS MANUAL .............................................................................................. 12 2.2 GLOSSARY OF TERMS ............................................................................................ 12 3 DESCRIPTION ..................................................................................................................... 13 3.1 MULTIPLE APPLICATIONS ....................................................................................... 13 3.2 OVER-THE-AIR PROGRAMMING ............................................................................. 14 3.3 VERSATILE MOUNTING ........................................................................................... 14 4 OPERATION ........................................................................................................................ 15 4.1 STARTING THE XL-90D ............................................................................................ 15 4.2 INDICATORS ............................................................................................................. 15 5 UNPACKING AND CHECKING EQUIPMENT...................................................................... 17 5.1 UNPACKING EQUIPMENT ........................................................................................ 17 5.2 INSPECTING AND INVENTORYING EQUIPMENT ................................................... 17 5.3 ITEMS INCLUDED ..................................................................................................... 17 5.4 OPTIONS AND ACCESSORIES ................................................................................ 18 6 INSTALLATION ................................................................................................................... 19 6.1 GENERAL PLANNING ............................................................................................... 19 6.2 SITE GROUNDING .................................................................................................... 19 6.3 EQUIPMENT INSTALLATION ................................................................................…

Text truncated - open the document above for the full version.

HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL FCC ID: OWDTR-0167-E Original submission ATTESTATION Part 90 Subpart R Application Review 1. Explanation of which Narrowband or Wideband channel segments the device is capable of supporting from those listed in 90.531(b). - For Narrowband segments: a) Is the device capable of operating on “General Use” channels listed in 90.531(b)(5) or “State” channels listed in 90.531(b)(6)? Response: Yes. b) Is the device ONLY capable of operating on Low Power “Regional” channels listed in 90.531(b)(3) or Low Power “Itinerant” channels listed in 90.531(b)(4)? Response: No, the device is capable of operating on the channels specified in a) above, c) below, as well as the Low Power “Itinerant” channels listed in 90.531(b)(4). c) Is the device capable of operating on “Nationwide” Interoperability channels listed in 90.531(b)(1)? Response: Yes. HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL - For Wideband segments: d) Is the device capable of operating on Interoperability channels listed in 90.531(b)(1)? Response: No. 2. Statement regarding the modulation capabilities of the device: - Does the device support digital Voice only, Data only, or both [see 90.547]? Response: Data only. - Does the device support analog voice operation [see 90.535(a)]? Response: No 3. Verify the following Interoperability Channel Operation requirements listed in 90.531 and 90.547 for Narrowband mobile, portable, or control devices only, given the information from #1 and #2 above: a) Designed for Data ONLY Operation on Nationwide, General Use or State channels - Must be capable of operating on the data interoperability channels listed in 90.531(b)(1)(i). Response: Yes. b) Designed for Voice ONLY Operation on Nationwide, General Use or State channels - HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL Must be capable of operating on the nationwide and calling only interoperability channels listed in 90.531(b)(1) and (b)(1)(ii), but do not have to operate on data only channels listed in 90.531(b)(1)(i). Response: Answered in question 1. Radio is not a single mode device, and has a wide configuration flexibility to allow compliance with these rule parts. c) Designed for BOTH Voice and Data Operation on Nationwide, General Use or State channels – Must be capable of operating on all nationwide interoperability channels including data only and calling only channels listed in 90.531(b)(1), (b)(1)(i), and (b)(1)(ii). Response: Yes, when application configured as such. d) Designed for Low Power ONLY Operation on Regional/Itinerant channels – Must operate ONLY on the data/voice channels listed in 90.531(b)(3) or (b)(4). Response: Answered in question 1. 4. Verify the following capability requirements for all Wideband devices only, given the information from #1. and #2. above: a) Designed for Data ONLY Operation on Nationwide Interoperability channels – Must operate on the wideband data interoperability channels listed in 90.531(b)(1). Response: N/A HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL 5. Application filing requirements for Narrowband mobile, portable or control devices only: - Voice Operation on General Use, State, or Nationwide Voice Interoperability channels: a) Emission limitation (ACP) compliance for each combination of channel bandwidth and modulation for all band plans - 90.543. Response: Performed and reported in FCC EMC test report filed. b) Attestation of voice path efficiency compliance for operation on General Use and State channels only – 90.203(m) & 90.535(d). Response: N/A; applies to licensees. c) Attestation of operation on Nationwide Voice Interoperability and Calling Only channels – 90.547. For Voice Only devices, attestation to 90.547(a)(3). Response: Radio is capable of operation in sections cited. Answered above. d) Attestation of compliance to Project 25 FDMA Common Air Interface (ANSI 102) standards for operation on Nationwide Voice Interoperability and Calling Only channels only - 90.548(a)(1). Response: Radio product capable of Project 25. FCC EMC test report shows this, and emission designators indicate so. e) Frequency stability compliance for all band plans - 90.539(a) & (c). HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL Response: Yes. FCC EMC test report shows this, and emission designators indicate so. f) Transmitting power compliance for all band plans - 90.541(b) & (c). Response: Yes. FCC EMC test report shows this. - Data Operation on General Use, State, or Nationwide Data Interoperability channels: g) Emission limitation (ACP) compliance for each combination of channel bandwidth and modulation for all band plans - 90.543. Response: Performed and reported in FCC EMC test report filed. h) Attestation of data rate efficiency compliance for General Use and State channels only 90.535(b). Response: Compliant to requirements. Rates reported in FCC EMC test report filed. i) Attestation of operation on Nationwide Data Interoperability channels listed in 90.531(b)(1)(i) only – 90.547. For Data Only devices, attestation to 90.547(a)(2). Response: Radio product in data mode, but is multi-mode product based on application configuration. FCC EMC test report filed identifies emission designators for data mode operation. HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com CONFIDENTIAL j) Attestation of compliance to Project 25 Data Overview (ANSI 102) standards for operation on data interoperability channels listed in 90.531(b)(1)(i) only 90.548(a)(2). Response: Radio is Project 25 compliant. k) Frequency stability compliance for all band plans…

Text truncated - open the document above for the full version.

221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com HARRIS CORPORATION 050222-17 Request for Confidentiality Date: October 1, 2022 Subject: Confidentiality Request for: ______FCC ID / IC ID: OWDTR-0167-E / 3636B-0167___ ___ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒PermanentBlock Diagrams ☒Short Term--------------------------- External Photos ☒Short Term☐Permanent * 1 Internal Photos ☐Short Term☒PermanentOperation Description/Theory of Operation ☐Short Term☒PermanentParts List & Placement/BOM ☐Short Term☒PermanentTune-Up Procedure ☐Short Term☒PermanentSchematics ☒Short Term--------------------------- Test Setup Photos ☒Short Term☐Permanent * 1 User’s Manual ______Harris Corporation______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ 180 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: June 13, 2023. Sincerely, By: /Regulatory Manager Thomas D. Camper, Jr. (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 September 19, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 ATTESTATION www.harris.com XL-90D Extended Frequency Range FCC ID: OWDTR-0167-E Device is for use in Public Safety Part 90 and Part 24. Additionally, Federal Users are intended. The frequency bands are: 768-776 MHz 798-806 MHz Equipment programming is the responsibility of Authorized Service Personnel. Also, the operator cannot directly program the transmit frequencies using the normally accessible external controls. Harris Corporation acknowledges that operation on unauthorized frequencies is a violation of FCC rules. Harris Corporation acknowledges the inclusion of Grant note code “EF”. Part 2.106 has been used to construct the following table of frequency range capability intended for end users. Frequency(MHz) Part 90 Part 24 Federal 768.0000-776.0000 X X 798.0000-806.0000 X X Thomas D. Camper, Jr. Regulatory Manager HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com Authority to Act as Agent January 27, 2022 American Certific ation Body, Inc. 6731 Whittier Avenue Suite C110 Mc Lean, VA 22101 To Whom It May Concern: Rhein Tech Laboratories, Inc./Kathy Grzovic is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), t o the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is t rue and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: January 27, 2023 By: Thomas D Camper, Jr. Title: Regulatory Manager On behalf of: Harris Corporation Telephone: 434-455-9367

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com September 19, 2022 Subject: FCC ID: OWDTR-0167-E ATTESTATION Addition to Circuit Description Regarding Ground System and Antennas 1) All analog and digital circuits are referenced to the same PCB ground plane. This PCB ground plane is then tied to the radio chassis via mechanical fasteners/screws and spring clips. This is the chassis ground for the mobile radio. 2) For the antennas required for the licensed portion: We use multiple types of antennas, as called out in our user manual (document number: 14221-6100- 6000). These antennas are connected to the radio via the coaxial connector on the rear of the radio. This coaxial connector is fastened to the chassis which provides the chassis ground connection to the coaxial connector. Sincerely, Thomas D Camper, Jr. Regulatory Manager

XL-90D External Photos Front View XL-90D External Photos Back View Top View XL-90D External Photos Bottom View Left Side View XL-90D External Photos Right Side View

XLP-A0338_Label artwork XL-90D August 2, 2022 GOYO ELECTRONICS Serial Number Label XL-90D print example SCALE 1 : 1 F C C I D : O W D T R - 0 1 6 7 - E 14151-1000-01 Rev - Model:XL-90D IC:3636B-0167 Ser.# A40333SSSSSS F C C I D : O W D T R - 0 1 6 7 - E 14151-1000-01 Rev - Model:XL-90D IC:3636B-0167 Ser.# A40333000001 2208 EUT Front, Lower Left Corner ID Label Location

XL-90D Internal Photos Housing I nternal Assembly XL-90D Interal Photos IO Board Bottom Side IO Board Top Side XL-90D Interal Photos Main Board Bottom Shield Main Board Top Shield XL-90D Interal Photos Main Board Bottom Side with Shield Removed Main Board Top Side with Shield Removed

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com RF Maximum Permissible Exposure (MPE) Report for Controlled and Uncontrolled Environments L3Harris Technologies 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Contact: Thomas Camper Model: XL-90D FCC ID: OWDTR-0167-E IC: 3636B-0167 November 2, 2022 Report Prepared by: Richard B. McMurray, P.E. Document Number: 2022085MPE I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from the standards referenced above. Signature: Date: November 2, 2022 Typed/Printed Name: Desmond A. Fraser Position: President This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. and L3Harris Technologies. Test results relate only to the item tested. This report replaces R1.1. These test(s) are accredited under Rhein Tech Laboratories, Inc. ISO/IEC 17025 accreditation issued by ANAB. Refer to certificate and scope of accreditation AT-1445. Rhein Tech Laboratories, Inc. Client: L3Harris Technologies 360 Herndon Parkway, Suite 1400 Model: XL-90D Herndon, VA 20170 ID’s: OWDTR-0167-E/3636B-0 167 http://www.rheintech.com Report #: 2022085MPE Page 2 of 13 Table of Contents 1 MPE Measurements and Applicable Regulations ............................................................................ 3 2 Modifications ........................................................................................................................................ 3 3 Test Laboratory .................................................................................................................................... 3 4 Test Dates ............................................................................................................................................. 3 5 Antenna Information ............................................................................................................................ 4 6 Test Equipment, Accessories and Test Setup .................................................................................. 5 7 Justification of Transmitting Mode and Frequency ......................................................................... 5 8 MPE Limits for the EUT ....................................................................................................................... 6 9 Calculating the Safe Distance from the EUT’s Antenna .................................................................. 7 10 Standard Test Conditions and Engineering Practices..................................................................... 8 11 Measurement Procedure ..................................................................................................................... 8 12 Test Results .......................................................................................................................................... 9 13 Conclusion ......................................................................................................................................... 13 Rhein Tech Laboratories, Inc. Client: L3Harris Technologies 360 Herndon Parkway, Suite 1400 Model: XL-90D Herndon, VA 20170 ID’s: OWDTR-0167-E/3636B-0167 http://www.rheintech.com Report #: 2022085MPE Page 3 of 13 1 MPE Measurements and Applicable Regulations This test report presents the results of Maximum Permissible Exposure (MPE) measurements performed on the L3Harris Technologies XL-90D Radio, which operates in the 700 MHz, 800 MHz and 900 MHz frequency bands. The tests were performed in accordance with TCB training material and the following FCC Rules and Regulations and ISED Radio Standard Specifications: • IEEE Std C95.1: 2005: “IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz”, • IEEE Std C95.3: 2002: “IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields with Respect to Human Exposure to Such Fields, 100 kHz – 300 GHz”, • FCC OET Bulletin 65, Edition 97-01: “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields”, • FCC Supplement C to OET Bulletin 65, Edition 01-01: “Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emission”, • Subpart I, Part 1 of 47 CFR FCC Rules and Regulations, Edition 10-01-21: “Procedures Implementing the National Environmental Policy Act of 1969.” Specifically, Paragraph 1.1310: “Radiofrequency Radiation Exposure Limits”, • Subpart J, Part 2 of 47 CFR FCC Rules and Regulations, Edition 10-01-21: “Equipment Authorization Procedures.” Specifically, Paragraph 2.1091: “Radiofrequency Radiation Exposure Evaluation: Mobile Devices”, • RSS-102, Issue 5: Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) 2 Modifications No modifications were made to the EUT during testing. 3 Test Laboratory Testing was performed at the Rhein Tech Laboratories (RTL) test facility located at 360 Herndon Parkway, Suite 1400, Herndon, VA, 20170, by RTL personnel. ISED CAB ID: US0079, Company Number: 2956A 4 Test Dates Testing was performed September 8 – 13 and October 26 - 31, 2022. Rhein Tech Laboratories, Inc. Client: L3Harris Technologies 360 Herndon Parkway, Suite 1400 Model: XL-90D Herndon, VA 20170 ID’s: OWDTR-0167-E/3636B-0 167 http://www.rheintech.com Report #: 2022085MPE Page 4 of 13 5 Antenna Information The following antennas/mounts were tested for the MPE investigation. Band Description Gain Part # 700/800 MHz…

Text truncated - open the document above for the full version.

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com FCC Certification Report L3Harris Technologies 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Model: XL-90D FCC ID: OWDTR-0167-E November 2, 2022 Standards Referenced for this Report Part 2: 2021 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations Part 24: 2021 Personal Communications Services ANSI C63.26-2015 American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services Report Prepared By: Daniel Baltzell Document Number: 2022085PCB I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from the standards referenced above. Signature: Date: November 2, 2022 Typed/Printed Name: Desmond A. Fraser Position: President This report may not be reproduced, except in full, without the full written approval of Rhein Tech Laboratories, Inc. and L3Harris Technologies. Test results relate only to the item tested. This report replaces R1.1. These tests are accredited and meet the requirements of ISO/IEC 17025 as verified by ANAB. Refer to certificate and scope of accreditation AT-1445. Rhein Tech Laboratories, Inc. Client: L3Harris Technologies 360 Herndon Parkway Model #: XL-90D Suite 1400 ID: OWDTR-0167-E Herndon, VA20170 Standard: FCC Part 24 http://www.rheintech.com Report #: 2022085PCB Page 2 of 24 FCC Equipment Class: PCB FCC Rule Part Frequency Range (MHz) Conducted Output Power (W) Frequency Tolerance (ppm) Emission Designator Transmit Mode 24D 901 – 902 3.0 0.2 8K40F1D/E C4FM Data/Voice 24D 940 – 941 2.7 0.2 8K40F1D/E 24D 901 – 902 3.0 0.2 8K10DXW H-CPM (TDMA) Data/Voice 24D 940 – 941 2.7 0.2 8K10DXW Rhein Tech Laboratories, Inc. Client: L3Harris Technologies 360 Herndon Parkway Model #: XL-90D Suite 1400 ID: OWDTR-0167-E Herndon, VA20170 Standard: FCC Part 24 http://www.rheintech.com Report #: 2022085PCB Page 3 of 24 Table of Contents 1 Test Result Summary ................................................................................................................................... 5 2 General Information ...................................................................................................................................... 5 2.1 Test Facility ............................................................................................................................................. 5 2.2 Related Submittal(s)/Grant(s) ................................................................................................................. 5 2.3 Grant Notes ............................................................................................................................................. 5 2.4 Tested System Details ............................................................................................................................ 6 2.5 Configuration of Tested System .............................................................................................................. 6 3 FCC Part 2.1033(C)(8): Voltages and Currents through the Final Amplifying Stage ................................... 7 4 FCC Part 2.1046(a): RF Power Output: Conducted; Part 24.132(a)/(b): Power and antenna height limits; 7 4.1 Test Procedure ........................................................................................................................................ 7 4.2 Test Data ................................................................................................................................................. 7 5 FCC Part 2.1051: Spurious Emissions at Antenna Terminals; Part 24.133: Emission Limits ...................... 8 5.1 Test Procedure ........................................................................................................................................ 8 5.2 Test Data ................................................................................................................................................. 8 6 FCC Part 2.1053(a): Field Strength of Spurious Emissions; Part 24.133: Emission Limits ....................... 12 6.1 Test Procedure ...................................................................................................................................... 12 6.2 Test Data ............................................................................................................................................... 12 …

Text truncated - open the document above for the full version.