OWDTR-0036-ELand Mobile Base Station

ADDENDUM # 1 TO INSTALLATION MANUAL MM102554V1 R1A Refer to ECO#20028964 This addendum identifies the new replacement part for the duplexers used with the MASTR III Conventional and P25 Base Stations. MANUAL PAGE CHANGES: Page 11 – The Cabinet Duplexers Deleted the duplexer DU1K and change the required rack units from three to two. Options Required Rack Units Duplexers (factory installed) (DU1J, DU1M) 2 M/A-COM Wireless Systems 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 434-385-2400) Toll Free 800-528-7711 www.macom-wireless.com Printed in U.S.A. Installation Manual MM102554V1 R1A MASTR  III Conventional and P25 Base Stations TABLE OF CONTENTS Application and Assembly Diagrams........................ MM102555V1 Antenna Systems ............................................................. LBI-38983 Site Grounding and Lightning Protection ........ AE/LZT 123 4618/1 Tower Requirements and Specifications ......................... LBI-39185 Advanced Digital Capable MM102554V1 R1A 2 MANUAL REVISION HISTORY REV DATE REASON FOR CHANGE R1A August 2003 Initial Release. NOTICE! This manual covers M/A-COM, Inc. products manufactured and sold by M/A-COM, Inc. This device made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229. The voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any way convert the Object Code into human-readable form. MASTR and Voice Guard are registered trademarks and Aegis is a trademark of is a registered trademark of M/A-COM, Inc. Microsoft, Windows, and WindowsNT are registered trademarks of Microsoft Corporation Pentium is a registered trademark of Intel Corporation. All other brand and product names are registered trademarks, trademarks, or service marks of their respective holders. NOTICE! Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty. This manual is published by M/A-COM, Inc. , without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM, Inc. , at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of M/A-COM, Inc. Copyright 2003 M/A-COM, Inc. All rights reserved. MM102554V1 R1A 3 TABLE OF CONTENTS Page 1. REGULATORY AND SAFETY INFORMATION ............................................................................ 7 1.1 MAXIMUM PERMISSIBLE EXPOSURE LIMITS ........................................................................ 7 1.2 DETERMINING MPE RADIUS ......................................................................................................7 1.3 SAFETY TRAINING INFORMATION........................................................................................... 7 1.4 IMPORTANT SAFETY INFORMATION....................................................................................... 9 1.5 SAFETY SYMBOLS IN THIS DOCUMENT ............................................................................... 10 2. SPECIFICATIONS (GENERAL) ...................................................................................................... 11 2.1 CABINET........................................................................................................................................ 11 2.2 STATION........................................................................................................................................ 11 2.3 INTERFACE ................................................................................................................................... 12 3. INTRODUCTION ............................................................................................................................... 13 4. GENERAL INFORMATION .............................................................................................................15 4.1 REFERENCE MANUALS ............................................................................................................. 15 4.2 OPTIONS ........................................................................................................................................ 17 5. SITE PREPARATION ........................................................................................................................ 19 5.1 INTRODUCTION........................................................................................................................... 19 5.2 FACILITY PREPARATION .......................................................................................................... 19 5.2.1 Floor Plan ........................................................................................................................... 19 5.2.2 Equipment Cabinet Placement ........................................................................................... 19 5.2.3 Ceiling Requirements ......................................................................................................... 20 5.2.4 Size and Weight Considerations ........................................................................................ 20 5.2.5 Operating Environment ..…

Text truncated - open the document above for the full version.

M/A-COM, Inc. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Telephone: 434.455.9527 www.macom.com August 26, 2004 Subject: FCC ID: OWDTR-0036-E 800 MHz MASTR ® III base station Original equipment filing To: Whom it may concern. M/A-COM, Inc. wishes the filing information submitted for the subject equipment be treated as confidential information. By separate letter, agent authorization is granted to Mr. Denis Lalonde of Solectron regarding transmission of information on this subject. M/A-COM, Inc. requests that Circuit Operational Descriptions, Schematic Diagrams, Parts Lists, and Block Diagrams not be made routinely available for public inspection. M/A-COM, Inc. considers information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457 and Section 0.459 of the FCC rules. Thank you for your attention to this matter. Daryl Popowitch Regulatory Manager, Engineering Project Manager M/A-COM, Inc. – Lynchburg, VA

M/A-COM, Inc. 221 Jefferson Ridge Parkway Lynchburg, VA 24501 Telephone: 434.455.9527 www.macom.com August 26, 2004 To Whom It May Concern: The following organization is granted authority to act on M/A-COM’s behalf, to file technical reports, measurements, and forms for M/A-COM equipment with FCC ID: OWDTR-0036-E, 800 MHz MASTR ® III base station equipment as it applies to an original equipment filing. Denis Lalonde Radio Compliance Discipline Leader Solectron Technical Centre 21 Richardson Side Rd Kanata, ON K2K 2C1 · Canada We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, including FCC benefits. Sincerely, Daryl Popowitch Regulatory Manager, Engineering Project Manager

Solectron Technical Centre 21 Richardson Side rd Kanata ON K2K 2C1 · Canada Tel 613 271-5322 Fax 613 271-2581 http://www.solectrontechnicalctr.com/ September 27, 2004 Denis Lalonde Radio Compliance Discipline Leader American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Re: FCCID:OWDTR-0036-E & IC:3636B-0036 Dear Sir or Madam: This is a FCC Part 90 and Industry Canada RSS-119 Original Equipment application for the M/A-COM MASTRIII 800 MHz base station that operates between 851 and 870 MHz. The FCCID of this equipment is OWDTR-0036-E and the Industry Canada certification number is 3636B-0036. Please call me or write if you have any questions or comments. Regards, Denis Lalonde email: [email protected] Solectron Technical Centre

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 October 4, 2004 RE: FCC ID: OWDTR-0036-E_ATCB001756 Attention: Denis Lalonde I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that this is an FCC and an IC application. However, the label only shows the FCC ID. Please provide a label exhibit that shows the FCC and IC label. 2. Please note that the manual states MPE calculations were done using worse case conditions. Please note that no MPE calculations were provided. Please explain. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Lalonde, Denis To: [email protected] Subject: RE: OWDTR-0036-E_ATCB001756 Page 1 of 1 10/5/2004 Hi Dennis, Here's my answers to your comments and questions. 1. The Industry Canada ID is on the label. It is "IC: 36367B-0036". It wasn't put in the box with the FCCID. 2. The MPE evaluation was not included in the application because; - I thought it was not required for the certification since the MPE will be evaluated at the licensing of the BTS - I didnt't notice the MPE comments in the user manual. I have uploaded into the ATCB website the MPE calculations mentioned in the user manual. I also copied this message into the ATCB website. Regards, Denis Lalonde Radio Compliance Discipline Leader Solectron Technical Centre Tel: (613) 271-5322 Fax: (613) 271-2581 mailto:[email protected] http://www.engineering.cmac.com "This message may contain information proprietary to Solectron so any unauthorized disclosure, copying or distribution of its contents is strictly prohibited". -----Original Message----- From: dward ATCB [mailto:[email protected]] Sent: Monday, October 04, 2004 7:46 PM To: [email protected] Subject: OWDTR-0036-E_ATCB001756 Hi Denis Please see comments Thanks Dennis Ward ATCB Phone - Headquarters (703) 847-4700 Phone - Dt Associates (209) 966-2145 Phone -Alternate business (703) 880-2145

0036-E B-0036 0036 xxxx

Rx Front End 19D902782G5 Rev. A Module Rx. Front End Board: 90249065 Rev B Figure 1: Rx Front End Front Cover Figure 2: Rx Front End Top Side Cover Figure 3: Rx Front End Back Connector Figure 4: Rx Front End Bottom Side Cover Figure 5: Rx Front End Top Side Board Figure 6: Rx Front End Back Side Board Tx Synthesizer EA101685VS P1A 2 Module Tx Syn. Board: CB1011132V5 Rev P1A2 Figure 7: Tx Synthesizer Front Cover Figure 8: Tx Synthesizer Top Side Cover Figure 9: Tx Synthesizer Back Connector Figure 10: Tx Synthesizer Back Cover Figure 11: Tx Synthesizer Top View of Board with Inner Metal Cover Figure 12: Tx Synthesizer Top View of Board Fully Exposed Rx Synthesizer EA101684V5 P1A2 Module Rx Syn Board: CB101131V5 Rev P1A2 Figure 13: Rx Synthesizer Front Cover Figure 14: Rx Synthesizer Top Cover Figure 15: Rx Synthesizer Back Connector Figure 16: Rx Synthesizer Bottom Cover Figure 17: Rx Synthesizer Top of Board with Inner Metal Cover On Figure 18: Rx Synthesizer with Entire Board Exposed Page 1 Interior Photographs of Mastr III / SitePro Trunking Base Station Radio – Rx IF Module FCC ID: OWDTR-0036-E September 7, 2004 Page 2 Table of Figures Figure 1 - Rx IF overall.................................................................................................... 3 Figure 2 - Rx IF board top ............................................................................................... 4 Figure 3 - Rx IF board bottom ......................................................................................... 5 Page 3 Figure 1 - Rx IF overall Page 4 Figure 2 - Rx IF board top Page 5 Figure 3 - Rx IF board bottom

AC/DC Power Supply Model: SP593-1A Rev X02 Input: 100/240V 47-63 Hz S/N: QG12659 Board: 112959 X02 Figure 1: AC/DC Power Supply Front Cover Figure 2: AC/DC Power Supply Top Cover Figure 3: AC/DC Power Supply Back Connectors Figure 4: AC/DC Power Supply Bottom Cover Figure 5: AC/DC Power Supply Top of Board SitePro: 428932 Macom 9851167 Figure 6: SitePro Front Cover Figure 7: SitePro Top Cover Figure 8: SitePro Back Connectors Figure 9: SitePro Bottom Cover Figure 10: Tops of All SitePro Boards Sub-board on Controller Card: CB101869V 1/R1A 22 Figure 11: Sub-board on Controller Card Front Figure 12: Sub-board on Controller Card Back Sitepro Controller Board: CB101069V2 P3A Figure 13: Sitepro Controller Card Front Figure 14: Sitepro Controller Card Back Sitepro Interconnect Board: CB101073V1 Rev R2A Figure 15: Sitepro Interconnect Board Front Figure 16: Sitepro Interconnect Board Back Sitepro Analog Board: CB101070V1 Rev R6A Figure 17: Sitepro Analog Board Front Figure 18: Sitepro Analog Board Back SitePro Power Supply Figure 19: SitePro Power Supply Front Figure 20: SitePro Power Supply Back Figure 1: Power Supply SN 31725960 Back View No Cover Figure 2: Power Supply Top View No Cover Figure 3: Power Supply Front View Cover On

Page 1 Interior Photographs of Mastr III / SitePro Conventional Trunking Base Station Radio FCC ID: OWDTR-0036-E September 2, 2004 Page 2 Table of Figures Figure 1 - Backplane Top ................................................................................................ 3 Figure 2 - Backplane Board Bottom ................................................................................ 4 Figure 3 - Interface Board Top ........................................................................................ 5 Figure 4 - Interface Board Bottom ................................................................................... 6 Figure 5 - System Module Overall ................................................................................... 7 Figure 6 - System Module, cover removed...................................................................... 8 Figure 7 - System Module, main board top ..................................................................... 9 Figure 8 - System Module, main board bottom ............................................................. 10 Figure 9 - System Module - DSP Board top .................................................................. 11 Figure 10 - System Module - DSP Board bottom ..........................................................12 Figure 11 - DSP Module overall .................................................................................... 13 Figure 12 - DSP Module board top................................................................................ 14 Figure 13 - DSP Module board bottom.......................................................................... 15 Figure 15 - Power Module Board Top ........................................................................... 17 Figure 16 - Power Module Board Bottom ...................................................................... 18 Page 3 Figure 1 - Backplane Top Page 4 Figure 2 - Backplane Board Bottom Page 5 Figure 3 - Interface Board Top Page 6 Figure 4 - Interface Board Bottom Page 7 Figure 5 - System Module Overall Page 8 Figure 6 - System Module, cover removed Page 9 Figure 7 - System Module, main board top Page 10 Figure 8 - System Module, main board bottom Page 11 Figure 9 - System Module - DSP Board top Page 12 Figure 10 - System Module - DSP Board bottom Page 13 Figure 11 - DSP Module overall Page 14 Figure 12 - DSP Module board top Page 15 Figure 13 - DSP Module board bottom Page 16 Figure 14 - Power Module Overall Page 17 Figure 15 - Power Module Board Top Page 18 Figure 16 - Power Module Board Bottom

M/A-COM 221 Jefferson Ridge Pkwy Lynchburg, Virginia 24501 Telephone: (434) 455-9527 [email protected] 1 SUBJECT: MPE Calculations MPE calculations were made assuming worst case in each band with respect to frequency, ERP and Limit. The maximum allowable ERP was determined from the applicable part 90 rules regarding power limitation ( 90.205, 90.309, 90.635 ). The formula used was derived from OET 65, section 2, equation 4. The limit used was for “General Population / Uncontrolled Exposure”, derived from 47 CFR Part 1.1310 table 1. M/A-COM 221 Jefferson Ridge Pkwy Lynchburg, Virginia 24501 Telephone: (434) 455-9527 [email protected] 2

Certification Report for M/A-COM MASTRIII 800 MHz Base Station FCC Part 90 & Industry Canada RSS-119 Document Number: KP000908-CR-RAD-01-01 Release Date: September 21, 2004 Prepared for: M/A-COM, Inc. 221 Jefferson Ridge Parkway Lynchburg, Virginia U.S.A., 24501 Author: Denis Lalonde Radio Compliance Discipline Leader C-MAC Engineering Inc. A Solectron Company 21 Richardson Side Road, Kanata, Ontario, K2K 2C1 http://www.solectrontechnicalctr.com/ © Copyright C-MAC Engineering Inc. September 21, 2004 The master of this document is stored on an electronic database and is “write-protected” and may be altered only by authorized persons at C-MAC Engineering Inc. Viewing of the master document electronically ensures access to the current issue. Any hard copies must be regarded as uncontrolled copies. C-MAC Engineering Inc. accepts no liability for the content of this document except when it is reproduced in its entirety by a method acceptable to C-MAC Engineering Inc. Test report for the M/A-COM MASTRIII 800 MHz BTS FCC Part 90 & Industry Canada RSS-119 KP000908-CR-RAD-01-01 The master of this document is stored on an electronic database and is “write-protected” and may be altered only by authorized persons at C-MAC Engineering Inc.. Viewing of the master document electronically ensures access to the current issue. Any hard copies must be regarded as uncontrolled copies. Page 2 of 60 Release date: September 21, 2004 Release Control Record This document is based on CEI document template KG000347-TR-EMC-03. Release no. Reason for change Date released 01 Original Release September 21, 2004 Approvals Accreditations C-MAC Engineering test facilities are accredited by the Standards Council of Canada (SCC) in accordance with the scope of accreditation outlined at the following web site http://www.scc.ca/scopes/reg126-eng-s.pdf. [1]. The SCC is a member of the APLAC [13] and ILAC [14] organizations which, through mutual recognition arrangements, provide accreditation of test facilities in the member countries. The Solectron Technical Centre 10-meter Ambient Free Chamber (AFC) complies with the Industry Canada (IC) requirements for Test Facilities and Test Methods [15] under reference file number 4180. Through IC MRAs, EMC measurements are accepted in the following countries: USA, Australia, Singapore, Chinese Taipei (Taiwan), and the Republic of Korea. Further information can be found at the IC Certification and Engineering Bureau web site http://strategis.ic.gc.ca/epic/internet/inceb-bhst.nsf/en/Home under the "conformity assessment bodies" link. The VCCI [11] lab registration numbers associated with our test facilities are: R-1641, C-1749, C-1750, T-148, and T-149. C-MAC Engineering is ISO 9001:2000 and ISO-IEC 17025 certified and its processes are documented in the C-MAC Engineering Quality Manual [2] and Lab Operations Manual [3]. KP000908-CR-RAD-01-01 Test report for the M/A-COM MASTRIII 800 MHz BTS FCC Part 90 & Industry Canada RSS-119 The master of this document is stored on an electronic database and is “write-protected” and may be altered only by authorized persons at C-MAC Engineering Inc.. Viewing of the master document electronically ensures access to the current issue. Any hard copies must be regarded as uncontrolled copies. Release date: September 21, 2004 Page 3 of 60 Table of Contents RELEASE CONTROL RECORD...............................................................................................2 APPROVALS................................................................................................................................2 ACCREDITATIONS....................................................................................................................2 TABLE OF CONTENTS..............................................................................................................3 LIST OF FIGURES......................................................................................................................5 LIST OF TABLES........................................................................................................................6 1. EXECUTIVE SUMMARY.....................................................................................................9 2. COMPLIANCE SUMMARY...............................................................................................10 3. EQUIPMENT UNDER TEST (EUT)..................................................................................11 3.1 PRODUCT FUNCTIONAL DESCRIPTION.............................................................................11 3.2 MANUFACTURER INFORMATION......................................................................................11 3.3 TRANSMITTER SPECIFICATIONS.......................................................................................11 3.4 SYSTEM COMPONENTS....................................................................................................12 3.5 SUPPORT EQUIPMENT......................................................................................................12 3.6 SYSTEM SET-UP AND TEST CONFIGURATIONS.................................................................12 3.7 EUT INTERFACES AND CABLES......................................................................................14 3.8 SYSTEM MODIFICATIONS................................................................................................14 4. GENERAL TEST CONDITIONS.......................................................................................15 4.1 TEST FACILITY................................................................................................................15 4.2 MEASUREMENT INSTRUMENTATION................................................................................15 5. DETAILED TEST RESULTS..............................................................................................16 5.1 RF POWER............................................................…

Text truncated - open the document above for the full version.