OWDTR-0130-EBase Station Transceiver 450-470 MHz band

Overview Manual MM-015039-001 Rev. H, Jan/14 MASTR ® V Base Station MM-015039-001, Rev. H 2 MANUAL REVISION HISTORY REV DATE REASON FOR CHANGE E Sep/12 Added new DC distribution panels (EA-555019-003 and EA-555019-004), P25 Phase 2 information, and regulatory information for UHF band. F May/13 Updated product specifications, regulatory information, Router, and Switch information. Includes P25 Phase 2 information. G Dec/13 Added Part 22 and Part 80 compliance information. H Jan/14 Added FCC an Industry Canada compliance information for the 403 to 430 MHz and 450 to 470 MHz bands. Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for completeness, technical accuracy, and organization. You can assist in this process by submitting your comments and suggestions to the following Harris Corporation fax your comments to: 1-434-455-6851 PSPC Business or Technical Publications e-mail us at: PSPC _ TechPubs @ harris.com 221 Jefferson Ridge Parkway Lynchburg, VA 24501 ACKNOWLEDGEMENT This device is made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795; 5,226,084; 5,247,579; 5,491,772; 5,517,511; 5,630,011; 5,649,050; 5,701,390; 5,715,365; 5,754,974; 5,826,222; 5,870,405; 6,161,089; and 6,199,037 B1. DVSI claims certain rights, including patent rights under aforementioned U.S. patents, and under other U.S. and foreign patents and patents pending. Any use of this software or technology requires a separate written license from DVSI. CREDITS Harris, assuredcommunications, VIDA, EDACS, NetworkFirst, and OpenSky are registered trademarks of Harris Corporation. AMBE is a registered trademark and IMBE, AMBE+, and AMBE+2 are trademarks of Digital Voice Systems, Inc. All brand and product names are trademarks, registered trademarks, or service marks of their respective holders. NOTICE! The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S. Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations. Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501. Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations, or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty. This product conforms to the European Union WEEE Directive 2002/96/EC. Do not dispose of this product in a public landfill. Take it to a recycling center at the end of its life. This manual is published by Harris Corporation without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Harris Corporation at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Harris Corporation. Copyright © 2009-2014, Harris Corporation. All rights reserved. MM-015039-001, Rev. H 3 TABLE OF CONTENTS Section Page 1 REGULATORY AND SAFETY INFORMATION ...................................................................................... 5 1.1 SAFETY SYMBOL CONVENTIONS .................................................................................................. 5 1.2 IMPORTANT SAFETY INSTRUCTIONS ........................................................................................... 5 1.3 MAXIMUM PERMISSIBLE EXPOSURE LIMITS ............................................................................. 6 1.4 DETERMINING MPE RADIUS ........................................................................................................... 7 1.5 SAFETY TRAINING INFORMATION ................................................................................................ 7 1.6 REGULATORY APPROVALS ............................................................................................................. 8 1.6.1 Federal Communications Commission ...................................................................................... 8 1.6.2 Industry Canada ......................................................................................................................... 9 1.7 MARITIME CHANNELS ................................................................................................................... 10 2 SPECIFICATIONS ........................................................................................................................................ 16 3 INTRODUCTION .......................................................................................................................................... 18 4 MASTR V BASE STATION OVERVIEW .................................................................................................. 19 4.1 MULTI-CHANNEL BASE STATION SHELF ASSEMBLY ............................................................ 19 4.1.1 Multi-Channel Base Station Shelf ........................................................................................... 20 4.2 HIGH POWER AMPLIFIER/POWER SUPPLY SHELF ASSEMBLY ............................................. 21 4.3 MASTR V MODULES ..…

Text truncated - open the document above for the full version.

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com ATTESTATION MASTR V Extended Frequency Range – Contiguous Frequency Listing Device is for use under Part 90, Part 22 and Part 80 bands. Additionally, Federal end users are intended. The frequency band is: 450 – 470 MHz Part 2.106 has been used to construct the following table of frequency range capability intended for end users. Harris Corporation acknowledges that operation on unauthorized frequencies is a violation of FCC rules. Harris Corporation acknowledges the inclusion of Grant note code “EF”. Frequency(MHz) Part 90 Part 80 Part 22 Federal 450.0000-454.0000 X 454.0000-455.0000 X X 455.0000-456.0000 456.0000-460.0000 X X X 460.0000-462.5375 X 462.5375-462.7375 X 462.7375-467.5375 X X 467.5375-467.7375 X X 467.7375-470.0000 X X Jeremy Johnson Regulatory Manager

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com February 20, 2014 MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Subject: FCC ID: OWDTR-0130-E Original Grant CONFIDENTIALITY Harris wishes to submit this confidentiality letter for the record on FCC ID: OWDTR- 0130-E, MASTR V 450-470 MHz base station. Harris is requesting that parts lists, schematics, block diagrams, factory calibration, and operational descriptions for this application not be made routinely available for public inspection. Harris considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457 and Section 0.459 of the FCC rules. Thank you for your attention to this matter. Jeremy Johnson Regulatory Manager

Photograph 1. Chassis – Back Photograph 2. Chassis – Bottom Photograph 3. Chassis – Front Photograph 4. Chassis – Left Photograph 5. Chassis – Right Photograph 6. Chassis - Top

Photograph 1. Backplane - Bottom Side Photograph 2. Backplane - Top Side Photograph 3. Baseband Module - Bottom Side Photograph 4. Baseband Module - Top Side Photograph 5. E-Switch - Bottom Side Photograph 6. E-Switch - Top Side Photograph 7. Linearizer - Bottom Side Photograph 8. Linearizer - Top Side Photograph 9. Power Amplifier Complete Amp Top Side Photograph 10. Power Amplifier Driver Assembly Bottom Side Photograph 11. Power Amplifier Driver Assembly Top Side Photograph 12. Power Amplifier Final Assembly Bottom Side Photograph 13. Power Amplifier Final Assembly Top Side Photograph 14. Power Amplifier Output Assembly Bottom Side Photograph 15. Power Amplifier Output Assembly Top Side Photograph 16. Power Amplifier Switcher Assembly Bottom Photograph 17. Power Amplifier Switcher Assembly Top Photograph 18. Power Supply - Bottom Side Photograph 19. Power Supply - Top Side Photograph 20. Receiver - Bottom Side Photograph 21. Receiver - Top Side Photograph 22. Traffic Controller - Bottom Side Photograph 23. Traffic Controller - Top Side Photograph 24. Transmit Module - Bottom Side Photograph 25. Transmit Module - Top Side

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13301 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory April 10, 2014 Harris RF Communications 221 Jefferson Ridge Pkwy. Lynchburg, VA 24501 Dear Tony Bond, Enclosed is the EMC Wireless test report for compliance testing of the Harris RF Communications, MASTR V, Model: MASV-UTXMV as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 15, Subpart B and ICES-003, Issue 5 August 2012 for a Class A Digital Device. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Harris RF Communications\EMC40588B-FCC_IC Rev. 1) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. Electromagnetic Compatibility Harris RF Communications Cover Page MASTR V, Model: MASV-UTXMV CFR Title 47, Part 15B, ICES-003 MET Report: EMC40588B-FCC_IC Rev. 1 © 2014, MET Laboratories, Inc. Page ii of vii DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the Harris RF Communications MASTR V, Model: MASV-UTXMV Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices MET Report: EMC40588B-FCC_IC Rev. 1 April 10, 2014 Prepared For: Harris RF Communications 221 Jefferson Ridge Pkwy. Lynchburg, VA 24501 Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility Harris RF Communications Cover Page MASTR V, Model: MASV-UTXMV CFR Title 47, Part 15B, ICES-003 MET Report: EMC40588B-FCC_IC Rev. 1 © 2014, MET Laboratories, Inc. Page iii of vii DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the Harris RF Communications MASTR V, Model: MASV-UTXMV Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class A Digital Devices Ben Taylor, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rule Part 15B, and Industry Canada standard ICES-003, Issue 5 August 2012 under normal use and maintenance. Asad Bajwa, Director, Electromagnetic Compatibility Lab Electromagnetic Compatibility Harris RF Communications Report Status MASTR V, Model: MASV-UTXMV CFR Title 47, Part 15B, ICES-003 MET Report: EMC40588B-FCC_IC Rev. 1 © 2014, MET Laboratories, Inc. Page iv of vii DOC-EMC702 6/18/2009 Report Status Sheet Revision Report Date Reason for Revision  April 3, 2014 Initial Issue. 1 April 10, 2014 Editorial correction. Electromagnetic Compatibility Harris RF Communications Table of Contents MASTR V, Model: MASV-UTXMV CFR Title 47, Part 15B, ICES-003 MET Report: EMC40588B-FCC_IC Rev. 1 © 2014, MET Laboratories, Inc. Page v of vii DOC-EMC702 6/18/2009 Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. References ...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample .................................................................................................................................6 E. Equipment Configuration ....................................................................................................................................6 F. Support Equipment .............................................................................................................................................7 G. Ports and Cabling Information ............................................................................................................................7 H. Mode of Operation ..............................................................................................................................................8 I. Method of Monitoring EUT Operation ..................................................................…

Text truncated - open the document above for the full version.

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13301 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory April 10, 2014 Harris RF Communications 221 Jefferson Ridge Pkwy. Lynchburg, VA 24501 Dear Tony Bond, Enclosed is the EMC Wireless test report for compliance testing of the Harris RF Communications, MASTR V, Model: MASV-UTXMV as tested to the requirements of the FCC Certification rules under Title 47 of the CFR Part 22 Subpart C for Public Mobile Service, Part 80 for Stations in the Maritime Services, Part 90 for Private Land Mobile Radio Services, and Industry Canada RSS-119, Issue 11, June 2011 for Radio Transmitters and Receivers Operating in the Land Mobile and Fixed Services in the Frequency Range 27.41-960 MHz. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Harris RF Communications\EMC40588-FCC22_80_90 Rev. 3) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13301 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 MET Report: EMC38832-FCC22_80 © 2014, MET Laboratories, Inc. Page ii of vii Electromagnetic Compatibility Criteria Test Report for the Harris RF Communications MASTR V, Model: MASV-UTXMV Verified under FCC Certification Rules Title 47 of the CFR, Part 22, 80, and 90 & RSS-119, Issue 11, June 2011 MET Report: EMC40588-FCC22_80_90 Rev. 3 April 10, 2014 Prepared For: Harris RF Communications 221 Jefferson Ridge Pkwy. Lynchburg, VA 24501 Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility Harris RF Communications Cover Page MASTR V, Model: MASV-UTXMV CFR Title 47 Part 22, Part 80, Part 90 & RSS-119 MET Report: EMC40588-FCC22_80_90 Rev. 3 © 2014, MET Laboratories, Inc. Page iii of vii Electromagnetic Compatibility Criteria Test Report for the Harris RF Communications MASTR V, Model: MASV-UTXMV Verified under FCC Certification Rules Title 47 of the CFR, Part 22, 80, and 90 & RSS-119, Issue 11, June 2011 Surinder Singh, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of Part 22, Part 80, and Part 90 of the FCC Rules, and RSS-119, Issue 11, June 2011 of the Industry Canada Standards under normal use and maintenance. Asad Bajwa, Director Electromagnetic Compatibility Lab Electromagnetic Compatibility Harris RF Communications Report Status MASTR V, Model: MASV-UTXMV CFR Title 47 Part 22, Part 80, Part 90 & RSS-119 MET Report: EMC40588-FCC22_80_90 Rev. 3 © 2014, MET Laboratories, Inc. Page iv of vii Report Status Sheet Revision Report Date Reason for Revision  March 27, 2014 Initial Issue. 1 March 28, 2014 Editorial corrections 2 April 1, 2014 Revised to reflect engineer corrections. 3 April 10, 2014 Added transient frequency behavior Electromagnetic Compatibility Harris RF Communications Table of Contents MASTR V, Model: MASV-UTXMV CFR Title 47 Part 22, Part 80, Part 90 & RSS-119 MET Report: EMC38832-FCC22_80 Rev. 3 © 2014, MET Laboratories, Inc. Page vi of vii Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. References ...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample .................................................................................................................................5 E. Equipment Configuration ...........................................................................................…

Text truncated - open the document above for the full version.

Photograph 1. Frequency Stability, Test Setup