OX6VB100ATablet PC

1 Contents CONTENTS ........................................................... 1 GENERAL NOTICES FOR USE ................................. 3 DISCLAIMER ........................................................ 3 1.0 PRODUCT BASICS ........................................... 4 1.1 BUTTONS AND CONNECTIONS ............................... 4 1.2 START UP AND SHUT DOWN .................................. 4 2.0 INTRODUCTION TO GOOGLE ANDROID 4.0 ..... 5 2.1 THE DESKTOP .................................................... 5 2.2 THE APP DRAWER – RIGHT TOP CORNER ................. 6 2.3 GOOGLE SEARCH / VOICE SEARCH – LEFT TOP CORNER ............................................................................ 7 2.4 NAVIGATION ICONS – BOTTOM LEFT OF THE SCREEN .. 8 2 3.0 GENERAL OPERATION .................................... 9 3.1 BATTERY STATUS / CHARGING YOUR TABLET ............ 9 3.2 INSTALLING APPS ............................................... 9 3.3 ADMINISTER / REMOVE APPS .............................. 10 3.4 ADD AN ACCOUNT ............................................ 10 4.0 BASIC SETUP ................................................ 12 4.1 CHANGING OPERATING LANGUAGE ...................... 12 4.2 WIFI SETTINGS ................................................ 13 4.3 CONNECTING THE TABLET TO YOUR PC ................. 14 5.0 FREQUENTLY ASKED QUESTIONS .................. 15 3 General notices for use ‐ This product is a highly advanced electronics device, disassembly, customization or repairs without the appropriate knowledge and pre-cautions can lead to dangerous situations with chance on damaging the product and serious injuries. ‐ Avoid use in extreme conditions such as high and low temperatures, high humidity or moist environments and around magnetic fields. Also avoid long-time exposure to sunlight. ‐ Only use by the manufacturer permitted accessories to avoid damages to the product with possibly warranty loss. ‐ Please follow the relevant local environmental regulations to deal with obsolete machines and accessories. ‐ Use a protective folder to avoid extreme physical shocks to the device (i.e. of dropping). Disclaimer ‐ The screenshots are for Android reference only. They may be made on a device with a different resolution or hardware configuration than yours and therefore can be slightly different that the final product. ‐ The manufacturer takes no responsibility for loss of information or data caused by hardware or software failure. The user is responsible for performing timely backups of important data. ‐ All information and images used in this user manual are provided ‘as is’ and are subject to change without notice. ‐ The manufacturer accepts no liability for the information offered in this document. 4 1.0 Product basics 1.1 Buttons and connections 1 Power on/off 2 Volume + 3 Volume - 4 Power jack 5 Mini USB 6 Mini HDMI 7 Headphone 8 Micro SD card reader 9 Microphone 10 Speaker 11 Webcam 1.2 Start up and shut down To start your device, press and hold the ‘Power button’ until the screen lights up. To shut down your device, press and hold the ‘Power button’ until the following dialog popup appears. 5 2.0 Introduction to Google Android 4.0 2.1 The Desktop The main area of interest will be the desktop itself. Here you will place shortcuts to Apps or widgets – a visual application that can display real- time information. There may be some pre-installed icons and widgets on your tablet. To change the desktop background image of your tablet return to your desktop by pressing the ‘HOME’ icon. Press and hold an open space on the desktop (don’t press an icon) - until a popup appears named ‘Select wallpaper from’. In the list may appear multiple options to select an image or animated image of choice. The option ‘Live Wallpapers’ will show the pre-installed animated desktop images. Other options such as a ‘Super-HD Player’, ‘Gallery’ or ‘Wallpapers’ allow you to select (widescreen) photos, downloaded images or other images; depending on the features of that specific application. 6 To place a widget or app shortcut on the desktop, touch and hold the icon until the App drawer fades and the desktop appears. Move your finger to the location where you want to place the icon and release your touch to place the icon. To move or delete icons and widgets from your desktop, touch and hold the icon until a grid appears. Move the icon to the new location or drag it to the ‘Remove’ bar on the top of the screen to remove it. Releasing the touch screen will confirm your action. 2.2 The App drawer – right top corner Press the icon in the top right of the screen to open the App drawer. Here you have access to two tabs; ‘APPS’ and ‘WIDGETS’. The ‘APPS’ tab displays all applications that are available on the tablet. The ‘WIDGET’ tablet contains the optional widgets that can be added to the desktop. To place a widget or app shortcut on the desktop, touch and hold the icon until the App drawer fades and the desktop appears. Move your finger to the location where you want to place the icon and release your touch to place the icon. When using apps or other parts of the operating system you often will see the ‘Extra options’ icon . Pressing this icon will open a secondary menu with more options. Functions like opening an advanced settings menu, switching to a different account or refreshing the displayed information are often ‘hidden’ behind this icon. 7 2.3 Google Search / Voice search – left top corner By clicking the ‘Google search’ / microphone button you can quickly type or speak keywords of your search. The search application will automatically determine whether the keyword(s) apply to an application or a web search. In the latter case a web browser will be opened and the results of your query will be displayed on the Google search engine. Note that both the ‘Google search’ function as well as the ‘Voice search’ requires the tablet to have access to the internet (by WiFi). 8 2.4 Navigation icons – bottom left of …

Text truncated - open the document above for the full version.

Date:2012-09-04 FCC ID: OX6VB100A Subject: Ad Hoc Mode Function Declaration To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Yours sincerely, Signatory Signature Name: Finley Fan Title: manager Company : ViewMate Electronic Technology Limited Add: 6 F, BuildingL,SectionE,Block71, Baoan District, Shenzhen,China ViewMate Electronic Technology Limited

Authorization Letter We, (the approval holder) Company name ViewMate Electronic Technology Limited Addresss 6 F, BuildingL,SectionE,Block71, Baoan District, City Shenzhen Country China declare that the following representative (agent): Name (person) Bovey.yang Company name NTEK Testing Technology Co., Ltd. Addresss 1/F, Building E, Fenda Science Park Sanwei Community, Xixiang Street, Baoan District City Shenzhen Country China to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Description Tablet PC Type or Model(s) VB100a Tradename or Brand(s) ViewSonic Product Description Tablet PC Type or Model(s) VB736 Tradename or Brand(s) ViewSonic Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) shenzhen 2012/9/4 Finley Fan Manager

FCC Confidentiality Request To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name ViewMate Electronic Technology Limited Addresss 6 F, BuildingL,SectionE,Block71, Baoan District, City Shenzhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: OX6 VB736 FCC ID: OX6 VB100A of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) X Operational Description X Block Diagrams X Schematics Diagrams Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date:Name: (this must be a person) Function:Signature: (or official company stamp) shenzhen 2012/9/4 Finley Fan Manager

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 07.03.2008 Datum: 00.00.00 Seite 1 von 1 PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date:2012-09-04 FCC ID: OX6VB100A Subject: Attestation Letter “Declaration of Conformity” Dear Sirs, Our products with the above FCC ID are defined as composite device. The transmitter is authorized under the “Certification” procedure. The device is also defined as “PC Periphery” acc to §15.101 Equipment authorization of unintentional radiators, where we hereby declare, that we apply and follow the “Declaration of Conformity” procedure. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Signature Name: Finley Fan Title: manager Company : ViewMate Electronic Technology Limited Add: 6 F, BuildingL,SectionE,Block71, Baoan District, Shenzhen,China ViewMate Electronic Technology Limited

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16 Photo 17

Compliance Certification Services Inc. Report No: KS120905A01-SF FCCID: OX6VB100A Date of Issue : September 17, 2012 Page 1 of 78 Rev. 01 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. ANSI/IEEE Std. C95.1-1999 In accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C FCC SAR TEST REPORT For Product Name: Tablet PC Brand Name: ViewSonic Model No.: VB100a Series Model: N/A Test Report Number: KS120905A01-SF Issued for ViewMate Electronic Technology Limited 6F, BuildingL,SectionE,Block71, Baoan District, Shenzhen, China Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc. Report No: KS120905A01-SF FCCID: OX6VB100A Date of Issue : September 17, 2012 Page 2 of 78 Rev. 01 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) ........................................................... 3 2. EUT DESCRIPTION....................................................................................................................4 3. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC................................ 4 4. TEST METHODOLOGY.............................................................................................................. 5 5. TEST CONFIGURATION ............................................................................................................ 5 6. DOSIMETRIC ASSESSMENT SETUP........................................................................................ 5 6.1 MEASUREMENT SYSTEM DIAGRAM ...........................................................................................................6 6.2 SYSTEM COMPONENTS...............................................................................................................................7 7. EVALUATION PROCEDURES ................................................................................................. 11 8. MEASUREMENT UNCERTAINTY............................................................................................ 14 9. EXPOSURE LIMIT .................................................................................................................... 15 10. EUT ARRANGEMENT .............................................................................................................. 16 10.1 ANTHROPOMORPHIC HEAD PHANTOM .................................................................................................16 10.2 DEFINITION OF THE “CHEEK/TOUCH” POSITION...................................................................................17 10.3 DEFINITION OF THE “TILTED” POSITION ................................................................................................18 11. MEASUREMENT RESULTS..................................................................................................... 19 11.1 TEST LIQUIDS CONFIRMATION ...............................................................................................................19 11.2 LIQUID MEASUREMENT RESULTS ..........................................................................................................20 11.3 PROBE CALIBRATION PROCEDURE .......................................................................................................20 11.4 SYSTEM PERFORMANCE CHECK...........................................................................................................25 11.5 EUT TUNE-UP PROCEDURES AND TEST MODE....................................................................................28 EUT SETUP PHOTOS ........................................................................................................................................30 SAR TESTED FOR BODY-WORN: .....................................................................................................................30 11.6 SAR MEASUREMENT RESULTS...............................................................................................................31 11.7 EUT PHOTO................................................................................................................................................32 12. EQUIPMENT LIST & CALIBRATION STATUS........................................................................ 35 13. FACILITIES............................................................................................................................... 36 14. REFERENCES.......................................................................................................................... 36 15. ATTACHMENTS ....................................................................................................................... 37 Appendix A: Plots of Performance Check..................................................................................... 38 Appendix B: DASY Calibration Certificate .................................................................................... 40 Appendix C: Plots of SAR Test Result .......................................................................................... 78 Compliance Certification Services Inc. Report No: KS120905A01-SF FCCID: OX6VB100A Date of Issue : September 17, 2012 Page 3 of 78 Rev. 01 This…

Text truncated - open the document above for the full version.

ViewMate Electronic Technology Limited 6 F, BuildingL,SectionE,Block71, Baoan District,Shenzhen,Chian TUNE-UP PROCEDURE Programming of this product's transmit frequencies can be performed ONLY by the manufacturer or by service or maintenance personnel. The operator cannot program transmit frequencies using the equipment's external operation. Data: 2012/9/4 Name: Finley Fan Title: manager Company : ViewMate Electronic Technology Limited Add: 6 F, BuildingL,SectionE,Block71, Baoan District, Shenzhen,China

Compliance Certification Services Inc. Reference No .: KS120905A01-SF Date of Issue: September 17, 2012 Report No .: KS120905A01-SF Page 1 of 4 IEEE 802.11b- Body Up Middle CH6.............................................................................................. 2 IEEE 802.11b- Body Down Middle CH6........................................................................................ 3 IEEE 802.11b- Body Top Middle CH6............................................................................................ 4 Compliance Certification Services Inc. Reference No .: KS120905A01-SF Date of Issue: September 17, 2012 Report No .: KS120905A01-SF Page 2 of 4 Test Laboratory: Compliance Certification Services Inc. September 16, 2012 IEEE 802.11b- Body Up Middle CH6 DUT: Tablet PC; Type: VB100a; Serial: N/A Communication System: IEEE 802.11b; Communication System Band: ISM 2.4GHz Band; Frequency: 2437 MHz;Communication System PAR: 0 dB Ambient: Temperature: 21 °C Relative humidity: 58% Liquid : Temperature: 20 °C Medium parameters used (interpolated): f = 2437 MHz; σ = 1.959 mho/m; ε r = 52.83; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(7.06, 7.06, 7.06); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) IEEE 802.11b /802.11b Body up Middle CH6/Area Scan (201x131x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.503 mW/g IEEE 802.11b /802.11b Body up Middle CH6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.250 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.685 W/kg SAR(1 g) = 0.304 mW/g; SAR(10 g) = 0.201 mW/g Maximum value of SAR (measured) = 0.478 mW/g Compliance Certification Services Inc. Reference No .: KS120905A01-SF Date of Issue: September 17, 2012 Report No .: KS120905A01-SF Page 3 of 4 Test Laboratory: Compliance Certification Services Inc. September 16, 2012 IEEE 802.11b- Body Down Middle CH6 DUT: Tablet PC; Type: VB100a; Serial: N/A Communication System: IEEE 802.11b; Communication System Band: ISM 2.4GHz Band; Frequency: 2437 MHz;Communication System PAR: 0 dB Ambient: Temperature: 21 °C Relative humidity: 58% Liquid : Temperature: 20 °C Medium parameters used (interpolated): f = 2437 MHz; σ = 1.959 mho/m; ε r = 52.83; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(7.06, 7.06, 7.06); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) IEEE 802.11b /802.11b Body Down Middle CH6/Area Scan (201x131x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.567 mW/g IEEE 802.11b /802.11b Body Down Middle CH6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.250 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.688 W/kg SAR(1 g) = 0.368 mW/g; SAR(10 g) = 0.231 mW/g Maximum value of SAR (measured) = 0.659 mW/g Compliance Certification Services Inc. Reference No .: KS120905A01-SF Date of Issue: September 17, 2012 Report No .: KS120905A01-SF Page 4 of 4 Test Laboratory: Compliance Certification Services Inc. September 16, 2012 IEEE 802.11b- Body Top Middle CH6 DUT: Tablet PC; Type: VB100a; Serial: N/A Communication System: IEEE 802.11b; Communication System Band: ISM 2.4GHz Band; Frequency: 2437 MHz;Communication System PAR: 0 dB Ambient: Temperature: 21 °C Relative humidity: 58% Liquid : Temperature: 20 °C Medium parameters used (interpolated): f = 2437 MHz; σ = 1.959 mho/m; ε r = 52.83; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(7.06, 7.06, 7.06); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) IEEE 802.11b /802.11b Body Top Middle CH6/Area Scan (201x54x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.524 mW/g IEEE 802.11b /802.11b Body Top Middle CH6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.209 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.685 W/kg SAR(1 g) = 0.318 mW/g; SAR(10 g) = 0.212 mW/g Maximum value of SAR (measured) = 0.645 mW/g

FCC RADIO TEST REPORT FCC ID: OX6VB736 Product： Tablet PC Trade Name： ViewSonic Model Name： VB736 Serial Model： N/A Report No.： NTEK- 2012NT0829744F Prepared for ViewMate Electronic Technology Limited 6F, BuildingL,SectionE,Block71, Baoan District, Shenzhen, China Prepared by NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website:www.ntek.org.cn Page 2 of 72 Report No.: NTEK-2012NT0829744F TEST RESULT CERTIFICATION Applicant’s name ................. : ViewMate Electronic Technology Limited Address ................................. : 6F, BuildingL,SectionE,Block71, Baoan District, Shenzhen, China Manufacture's Name ............ : ViewMate Electronic Technology Limited Address ................................. : 6F, BuildingL,SectionE,Block71, Baoan District, Shenzhen, China Product description Product name ........................... : Tablet PC Model and/or type reference : VB736 Serial Model： N/A Standards ............................. : FCC Part15.247 Test procedure ..............................ANSI C63.4-2003 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date (s) of performance of tests ............. : 29 Aug. 2012 ~8 Sep. 2012 Date of Issue ........................................... : 8 Sep. 2012 Test Result ............................................... : Pass Testing Engineer : (Apple Huang) Technical Manager : (Tom Zhang) Authorized Signatory : (Bovey Yang) Page 3 of 72 Report No.: NTEK-2012NT0829744F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 4 . POWER SPECTRAL DENSITY TEST 54 4.1 APPLIED PROCEDURES / LIMIT 54 4.1.1 TEST PROCEDURE 54 4.1.2 DEVIATION FROM STANDARD 54 4.1.3 TEST SETUP 54 4.1.4 EUT OPERATION CONDITIONS 54 4.1.5 TEST RESULTS 55 5 . BANDWIDTH TEST 61 5.1 APPLIED PROCEDURES / LIMIT 61 5.1.1 TEST PROCEDURE 61 Page 4 of 72 Report No.: NTEK-2012NT0829744F Table of Contents Page 5.1.2 DEVIATION FROM STANDARD 61 5.1.3 TEST SETUP 61 5.1.4 EUT OPERATION CONDITIONS 61 5.1.5 TEST RESULTS 62 6 . PEAK OUTPUT POWER TEST 68 6.1 APPLIED PROCEDURES / LIMIT 68 6.1.1 TEST PROCEDURE 68 6.1.2 DEVIATION FROM STANDARD 68 6.1.3 TEST SETUP 68 6.1.4 EUT OPERATION CONDITIONS 68 6.1.5 TEST RESULTS 69 7 . ANTENNA REQUIREMENT 70 7.1 STANDARD REQUIREMENT 70 7.2 EUT ANTENNA 70 8 . EUT TEST PHOTO 71 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 72 Report No.: NTEK-2012NT0829744F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247 (a)(2) 6dB Bandwidth PASS 15.247 (b) Peak Output Power PASS 15.247 (c) Radiated Spurious Emission PASS 15.247 (d) Power Spectral Density PASS 15.205 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 72 Report No.: NTEK-2012NT0829744F 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 72 Report No.: NTEK-2012NT0829744F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Tablet PC Trade Name ViewSonic Model Name VB736 Serial Model N/A Model Difference N/A Product Description The EUT is a Tablet PC Operation Frequency: 2412~2462 MHz Modulation Type: CCK/OFDM/DBPSK/DAPSK Bit Rate of Transmitter 802.11b:11/5.5/2/1 Mbps 802.11g:54/48/36/24/18/12/9/6 Mbps 802.11n:150/144.44/130/117/115.56/ 104/86.67/78/52/6.5 Mbps Number Of Channel 11 CH, Please see Note 2. Antenna Designation: Please see Note 3. Output Power(Conducted): 802.11b: 17.87 dBm (Max.) 802.11g: 16.79 dBm (Max.) 802.11n: 15.86 dBm (Max.) Antenna Gain (dBi) 2.0 dbi EIRP 802.11b: 17.87 dBm (Max.) 802.11g: 16.79 dBm (Max.) 802.11n: 15.86 dBm (Max.) Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Plea…

Text truncated - open the document above for the full version.

Page 71 of 72 Report No.: NTEK-2012NT0829743F 8. EUT TEST PHOTO Radiated Measurement Photos Page 72 of 72 Report No.: NTEK-2012NT0829743F Conducted Measurement Photos