OZGV680-CHXDRFID Reader/Writer

RFID System V680 Series User’s Manual Hand-held Reader/Writer V680-CHUD V680-CH1D V680-CH1D-PSI ID Tags V680 Series PRELIMINARY 2 Introduction RFID System User's Manual Introduction R EAD AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the product. At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. 3 RFID System User's Manual Introduction Meanings of Signal Words Introduction The following signal words are used in this manual. The following alert symbols are used in this manual. The following alert statements apply to the products in this manual. Each alert statement also appears at the locations needed in this manual to attract your attention. Meanings of Signal Words Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally, there may be significant property damage. Indicates…

Text truncated - open the document above for the full version.

17 RFID System User's Manual Section 2 Installing the USB Driver Section 2 Communications Preparations Installing the USB Driver When connecting the Hand-held Reader Writer to the host device for the first time, the USB driver must be installed at the host device. Install the USB Driver in the Personal Computer The V600-CHUD supports Windows 2000 and Windows XP operating systems. Install the driver in the host device follwoing the procedure correspondign to the OS being used. Operation on other OS is not supported. • Windows 2000 1.Turn ON the power to the personal computer and start Windows 2000. 2.Connect the Hand-held Reader Writer to the personal computer. For details on connection methods, refer to Connections. p.16 The following window will be displayed when the Hand-held Reader Writer is connected. 3.When the following window is displayed, click the Next Button. 18 Section 2 Installing the USB Driver RFID System User's Manual Section 2 Communications Preparations 4.Select Search for a suitable driver for my device (recommended) and then click the Next Button. 5.Select Specify a location and then click the Next Button. 6.Click the Browse Button, and select the folder in which the downloaded file RFID-Win2kcom.inf is saved. 19 RFID System User's Manual Section 2 Installing the USB Driver Section 2 Communications Preparations 7.Click the Next Button. The following window will be displayed when software installation is completed. 8.Click the Finish Buttton. 20 Section 2 Installing the USB Driver RFID System User's Manual Section 2 Communications Preparations Checking Installation Check that the driver is correctly installed. 1.Connect the Hand-held Reader Writer to the personal computer. 2.On the Start Menu, select Settings - Control Panel - System. 3.Select the Device Manager Button on the Hardware Tab Page. 21 RFID System User's Manual Section 2 Installing the USB Driver Section 2 Communications Preparations 4.Select Ports (COM & LPT), and check that OMRON RFID USB COM is displayed. The driver is correctly installed if this port is displayed. Communications with the Hand-held Reader Writer can be performed with the port number displayed in parentheses after OMRON RFID USB COM. 22 Section 2 Installing the USB Driver RFID System User's Manual Section 2 Communications Preparations • WindowsXP (SP1) 1.Turn ON the power to the personal computer and start Windows XP. 2.Connect the Hand-held Reader Writer to the personal computer. For details on connection methods, refer to Connections. p.16 Wait for the following window to be displayed. 3.When the following window is displayed, select Install from a list or specific location (Advanced) and click the Next Button. 23 RFID System User's Manual Section 2 Installing the USB Driver Section 2 Communications Preparations 4.Click the Browse Button, and select the folder in which the downloaded file RFID-Win2kcom.inf is saved. Then click the Next Button. 5.Click the Continue Anyway Button. When the following window is displayed, installation is completed. 6.Click the Finish Button. 24 Section 2 Installing the USB Driver RFID System User's Manual Section 2 Communications Preparations Checking Installation Check that the driver is correctly installed. 1.Connect the Hand-held Reader Writer to the personal computer. 2.On the Start Menu, select Control Panel - Performance and Maintenance. 3.Click the System Icon. 4.Click the Device Manager Button in the Hardware Tab Page. 25 RFID System User's Manual Section 2 Installing the USB Driver Section 2 Communications Preparations 5.Select Ports (COM & LPT), and check that OMRON RFID USB COM is displayed. The driver is correctly installed if this port is displayed. Communications with the Hand-held Reader Writer can be performed with the port number displayed in parentheses after OMRON RFID USB COM. 26 Section 2 Communications Test RFID System User's Manual Section 2 Communications Preparations Communications Test Test Run Procedure Connect the Hand-held Reader Writer to the host device. Visually check the indicator display. Execute the online test from the host device. Test run the system. Finish Check communications between the host device and Hand-held Reader Writer using the test command. Check operation using real commands. 27 RFID System User's Manual Section 2 Communications Test Section 2 Communications Preparations Communications Test Between Host Device and Hand-held Reader Writer Use the test command to test communications between the Hand-held Reader Writer and host device. Before performing communications with the Data Carrier, check the Hand-held Reader Writer connec- tions and communications. 1.Send the test command from the host device. For detail on the test command, refer to TEST (TS). p.78 2.If communications is normal, the Hand-held Reader Writer will return the received data. If a response is not returned, refer to Troubleshooting. p.95 Communications Test Between the Data Carrier and Hand-held Reader Writer Use a real command to test communications between the Data Carrier and the Hand-held Reader Writer. 1.Send the auto read command (AR) from the host device. For details on the auto read command, refer to AUTO READ (AR). p.42 The Hand-held Reader Writer will communicate with the Data Carrier and the operation indicator will flash green. 2.Move the antenna section of the Hand-held Reader Writer close to the Data Carrier. The Hand-held Reader Writer will read the data in the Data Carrier when the Hand-held Reader Writer moves within the commu- nications range. As a result, the operation indicator will be light green and then turn OFF. 28 Section 2 Communications Test RFID System User's Manual Section 2 Communications Preparations MEMO

Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products ") by Omron Electronics LLC and its subsidiary companies (“Omron ”). Omron objects to any terms or conditions proposed in Buyer’s purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change with- out notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron’s payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders . Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the impor- tation or sale of the Products. 7. Taxes . All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importa- tion, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liabil- ity and in addition to other remedies) cancel any unshipped portion of Prod- ucts sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure . Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in “break down” situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless oth- erwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security inter- est in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against nor- mal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original trans- portation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties . (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations . OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or oth- erwise of any intellectual property right. (c) Buyer Remedy . Omron’s sole obli- gation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsi- ble for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were prop- erly handled, stored, installed and maintained and not subject to contamina- tion, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa- nies shall not be liable for the suit…

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 November 1, 2007 RE: FCC ID: OZGV680-CHXD_ATCB005567 Attention: I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please provide the FCC/IC label exhibits in English. 2. Please note that Industry Canada does not allow wild card characters in the Product number for IC certification. The interpretation from IC is “Special characters and Wild card characters: Special characters are not allowed in the UPN but are allowed in the model number. Wild card characters are not allowed in the UPN number. Wild card characters are defined as a series of identical characters used for the purpose of identifying multiple products.” Please note that the IC number for this device is 850L-V680CHXD. Please note that while not a series of identical characters, it does appear to indicate that the “X” in the IC number refers to multiple model numbers. Please explain and show how this IC number is not using the “X” as a wild card. 3. Please provide an explanation in English as to how the label is permanently affixed to the device. 4. Please note that the test report does not clearly state that radiated emissions below 30MHz was done using a Magnetic Loop Antenna. Please note that the reference to a loop uncertainty number does not meet the requirement to clearly identify the use of a mag loop antenna below 30MHz. Please correct the report to properly identify the antenna(s) used in each radiated emissions test. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

External Photos Model:V680-CH1D To p Bottom Side 1 Side 2 Side 3 Side 4 Model:V680-CH1D-PSI To p Bottom Side 1 Side 2 Side 3 Side 4 Model:V680-CHUD To p Bottom Side 1 Side 2 Side 3 Side 4 End

Internal Photos Model:V680-CH1D Main board side A (with Antenna board) Main board side A (without Antenna board) Main board side B (with shield) Main board side B (without shield) Antenna board side A Antenna board side B Antenna coil (with Silicone) Antenna coil (without Silicone) Model:V680-CH1D-PSI Main board side A (with Antenna board) Main board side A (without Antenna board) Main board side B (with shield) Main board side B (without shield) Antenna board side A Antenna board side B Antenna coil (with Silicone) Antenna coil (without Silicone) Model:V680-CHUD Main board side A (with Antenna board) Main board side A (without Antenna board) Main board side B (with shield) Main board side B (without shield) Antenna board side A Antenna board side B Antenna coil (with Silicone) Antenna coil (without Silicone) End

Test report No. : 28AE0160-HO-A-R1 Page : 2 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Client information .............................................................................................. 3 SECTION 2: Equipment under test (E.U.T.) .......................................................................... 3 SECTION 3: Test specification, procedures & results ........................................................... 4 SECTION 4: Operation of E.U.T. during testing ................................................................... 7 SECTION 5: Conducted emission ............................................................................................ 9 SECTION 6: Radiated emission (Fundamental , Spurious Emission and Spectrum Mask ) 10 SECTION 7: 20dB Bandwidth................................................................................................ 11 SECTION 8: Frequency Tolerance ........................................................................................ 11 SECTION 9: 99% Occupied Bandwidth ............................................................................... 11 APPENDIX 1: Photographs of test setup .............................................................................. 12 Conducted emission..............................................................................................................12 Radiated emission................................................................................................................. 15 Worst Case Position (Y-axis)............................................................................................... 18 APPENDIX 2: Data of EMI test ............................................................................................. 19 Conducted emission..............................................................................................................19 Radiated emission(Fundamental emission and Spectrum Mask).................................... 34 Radiated emission (Spurious emission: above 30MHz) .................................................... 43 20dB Bandwidth ................................................................................................................... 46 99% Occupied Bandwidth................................................................................................... 47 Frequency Tolerance............................................................................................................48 APPENDIX 3: Test instruments ............................................................................................. 49 Test report No. : 28AE0160-HO-A-R1 Page : 3 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 1: Client information Company Name : OMRON Corporation Address : 2-2-1 Nishi-kusatsu, Kusatsu-city, Shiga-Pref., 525-0035 Japan Telephone Number : +81-77-565-5287 Facsimile Number : +81-77-565-5553 Contact Person : Kazushi Yamasaki SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : RFID READER/WRITER Model No. : V680-CH1D, V680-CHUD, V680-CH1D-PSI Serial No. : RF-DS-07011 (V680-CH1D), RF-DS-07014 (V680-CHUD), RF-DS-07012 (V680-CH1D-PSI) Rating : DC 5.0V Country of Manufacture : Japan Receipt Date of Sample : September 10, 2007 Condition of EUT : Production model Modification of EUT : No modification by the test lab. 2.2 Product Description Model No: V680-CH1D, V680-CHUD and V680-CH1D-PSI are the RFID READER/WRITER. The clock frequencies of EUT are 13.56MHz (CPU), 16MHz(CPU), 48MHz(USB, V680-CHUD only). The radio specification of V680-CH1D, V680-CHUD and V680-CH1D-PSI is identical. The difference in three models is a wired interface only. - V680-CH1D : The RS-232C interface and the power was supplied from the attached AC adapter. - V680-CHUD : The USB interface and the power was supplied from the USB signal cable. USB signal cables are 1.9m and 0.8m, and a difference in two cables is the length only. - V680-CH1D-PSI : The RS-232C interface and the power was supplied from the RS-232C signal cable. Equipment Type : Transceiver Frequency band : 13.553-13.567 MHz Frequency of Operation : 13.56 MHz Type of modulation : ASK Antenna Type : Coil antenna Method of Frequency Generation : Crystal Operating voltage (inner) : DC5.0V Operating Temperature : 0 deg. C. to +40 deg. C. Test report No. : 28AE0160-HO-A-R1 Page : 4 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part15 Subpart C : 2007 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.225 : Operation within the band 13.110-14.010MHz FCC 15.31 (e) This EUT provides stable voltage(DC4.3V) constantly to RF Module regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is mounted inside of the EUT. Therefore, the equipment complies with the antenna requirement of Section 15.203. Test report No. : 28AE0160-HO-A-R1 Page : 5 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 3.2 Procedures an…

Text truncated - open the document above for the full version.

Test report No. : 28AE0160-HO-A-R1 Page : 19 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 APPENDIX 2: Data of EMI test Conducted emission (Reference chart, V680-CH1D) DATA OF CONDUCTED EMISSION TEST UL Japan, Inc. Head Office EMC Lab. No.2 Semi Anechoic Chamber Date : 2007/09/18 Company : OMRON Corporation Report No. : 28AE0160-HO Kind of EUT : RFID READER/WRITER Power : DC 5.0V (AC adapter:AC120V/60Hz) Model No. : V680-CH1D Temp./Humi. : 26deg.C / 54% Serial No. : RF-DS-07011 Operator : Kenichi Adachi Mode / Remarks : Transmitting (without Tag) (with Antenna) LIMIT : FCC15.207 QP FCC15.207 AV CHART:WITH FACTOR,Peak hold data. CALCURATION:RESULT[dBuV]=READING[dBuV]+C.F[dB](LISN LOSS+CABLE LOSS) Except for the above table : adequate margin data below the limits. Frequency[Hz] [dBuV]<< PEAK DATA >> N:PEAK .15M30M.2M.3M.5M.7M1M2M3M5M7M10M20M 0 10 20 30 40 50 60 70 80 Frequency[Hz] [dBuV]<< PEAK DATA >> L:PEAK .15M30M.2M.3M.5M.7M1M2M3M5M7M10M20M 0 10 20 30 40 50 60 70 80 Test report No. : 28AE0160-HO-A-R1 Page : 20 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Conducted emission (V680-CH1D) DATA OF CONDUCTED EMISSION TEST UL Japan, Inc. Head Office EMC Lab. No.2 Semi Anechoic Chamber Date : 2007/09/18 Company : OMRON Corporation Report No. : 28AE0160-HO Kind of EUT : RFID READER/WRITER Power : DC 5.0V (AC adapter:AC120V/60Hz) Model No. : V680-CH1D Temp./Humi. : 26deg.C / 54% Serial No. : RF-DS-07011 Operator : Kenichi Adachi Mode / Remarks : Transmitting (with Tag) (with Antenna) LIMIT : FCC15.207 QP FCC15.207 AV CHART:WITH FACTOR,Peak hold data. CALCURATION:RESULT[dBuV]=READING[dBuV]+C.F[dB](LISN LOSS+CABLE LOSS) Except for the above table : adequate margin data below the limits. Frequency[Hz] [dBuV]<< PEAK DATA >> N:PEAK .15M30M.2M.3M.5M.7M1M2M3M5M7M10M20M 0 10 20 30 40 50 60 70 80 Frequency[Hz] [dBuV]<< PEAK DATA >> L:PEAK .15M30M.2M.3M.5M.7M1M2M3M5M7M10M20M 0 10 20 30 40 50 60 70 80 Test report No. : 28AE0160-HO-A-R1 Page : 21 of 49 Issued date : October 1, 2007 Revised date : November 8, 2007 FCC ID : OZGV680-CHXD UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Conducted emission (V680-CH1D) DATA OF CONDUCTED EMISSION TEST UL Japan, Inc. Head Office EMC Lab. No.2 Semi Anechoic Chamber Date : 2007/09/18 Company : OMRON Corporation Report No. : 28AE0160-HO Kind of EUT : RFID READER/WRITER Power : DC 5.0V (AC adapter:AC120V/60Hz) Model No. : V680-CH1D Temp./Hum…

Text truncated - open the document above for the full version.