P3A-K78-205MOBILE PAYMENT TERMINAL

Version 2.0, September 2003 Document 902-MA-0194 GPRS/GSM K78-205 Advanced Mobile Payment Terminal User Guide K78-205 User Guideii Disclaimer All material contained in this document is furnished pursuant to the terms and conditions of a duly executed Program Product Licence ("Licence") and/or a duly executed Agreement to Purchase or Lease Equipment ("Agreement"). All terms, conditions, warranties, undertakings, inducements or representations, whether express, implied, statutory or otherwise, relating in any way to the products the subject of the Licence and/or the Agreement are excluded, other than: 1. terms, conditions or warranties expressly provided for in the Licence and/or the Agreement; and 2. terms, conditions or warranties implied by any Act of Parliament which may not be excluded provided that Keycorp's liability for any breach of any such term, condition or warranty shall, subject to the Licence and/or Agreement, be limited at the option of Keycorp to any one or more of the following: (a) if the breach relates to goods: (i) the replacement of the goods or the supply of the equivalent goods; (ii) the repair of the goods; (iii) the payment of the cost of replacing the goods or of acquiring equivalent goods; or (iv) the payment of the costs of having the goods repaired; and (b) if the breach relates to services: (i) the supplying of the services again; or (ii) the payment of the cost of having the services supplied again. Without limiting the generality hereof, Keycorp shall not be under any liability to any person in respect of any loss or damage, including consequential loss or damage and however caused, which may be suffered or incurred or which may arise directly or indirectly from the use of the material contained in this document or any other material furnished pursuant to the Licence and/or the Agreement. All the users of the material contained in this document or any other material furnished pursuant to the Licence and/or the Agreement should ensure that the material is used in compliance with the laws, rules and regulations of the jurisdictions in which the material is used. The material contained within is subject to change without notice and Keycorp may issue revised documents containing any such changes. K78-205 User Guideiii NOTICE TO USERS REGULATORY AND SAFETY INFORMATION Australian Communications Authority (Australia Only) The GSM module fitted in this device complies with Australian requirements and is marked with Australian supplier code N173. European Telephone Network (European Union Only) This equipment has been declared as compliant in accordance with EU Council Directive 1999/5/EC for pan-European single terminal connection to the Public Switched Telephone Network (PSTN) and displays the CE mark accordingly. However, due to differences between the individual PSTNs provided in different countries, the Declaration of Compliance does not, of itself, give an assurance of successful operation on every PSTN network termination point. In the event of problems you should contact your equipment supplier in the first instance. FCC and Industry Canada Regulatory and Safety Information (USA/Canada Only) (a) Information to Users Warning: Changes or modifications not expressly approved by Keycorp could void the user’s authority to operate the equipment (b) FCC Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: K78-205 User Guideiv - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. (c) FCC Telephone Connection – General Requirements This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. Applicable certification jack Universal Service Order Codes (“USOC”) for the Equipment is RJ11C. If service from the local telephone is requested they will require Facility Interface Code (“FIC”) and Service Order Code (“SOC”). These are as follows: (a)Facility Interface Code (“FIC”) 02LS2 (b)Service Order Code (“SOC”)9.0Y A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this p…

Text truncated - open the document above for the full version.

4 February 2004 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject:Request for withholding from public disclosure the schematic diagrams and system block diagrams pursuant to an application for certification. Applicant:Keycorp Limited Product:Mobile Payment Terminal Model:K78-205 FCC ID:P3A-K78-205 Dear Sir/Madam We, Keycorp Limited, requests that the following information submitted with the application for Equipment Authorization be withheld from public disclosure as per Section 0.459 of the Commission's Rules: 1. Block Diagram 2. Schematics 3. Operational Description 4. Parts List This request is made under the provisions of Section 0.457(d) of the Commission's Rules, and Section 552(b)(4) of the Freedom of Information Act. These sections authorize withholding from public inspection materials which would be privileged as a matter of law if retained by the person submitting them, and materials which would not customarily be released to the public by that person. Yours truly Ken McAnulty Engineering Services Manager

ANNEX 2 – EXTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 1 ANNEX 2 – EXTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 2

K78-205 LABLE LOCATION K78 REAR K78 LABEL

ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 1 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 2 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 3 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 4 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 5 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 6 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 7 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 8 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 9 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 10 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 11 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 12 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 13 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 14 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 15 ANNEX 3 – INTERNAL PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A2 - 16

file:///T|/K/KEYCORP_P3A/178UC4/operational%20desc%20-%20letter.htm From: Dan Huynh [[email protected]] Sent: Monday, February 23, 2004 11:30 AM To: [email protected]; [email protected] Cc: Tri Luu Subject: KEYCORP LIMITED - FCC ID: P3A-K78-205 REFERENCE: JOB 178UC4 Attn: Gretchen Torres F. DeNuzzo In reply to your recent question regarding the Tune Up Info: There is no requirement for a "tune-up procedure" for the GM47 module - it is fully aligned in the factory and needs no further adjustment. Best Regards, Dan Huynh Ultratech Engineering Labs Inc. file:///T|/K/KEYCORP_P3A/178UC4/operational%20desc%20-%20letter.htm2/23/2004 8:16:47 AM

Page 1 of 40 This document shall not be copied or reproduced, except in full without the written permission of the Technical Director , EMC Technologies Pty. Ltd. The certificate on page 3 may be reproduced in full. www. emctech.com.au SAR Test Report - IC Industry Canada ID: 2813A-K78205 Report Number: M031214-IC Test Sample: Dual Band GSM EFTPOS Terminal Model Number: K78 Tested For: Keycorp Ltd Date of Issue: 30 th January 2004 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. EMC Technologies Pty Ltd A.C.N. 057 105 549 57 Assembly Drive Tullamarine Victoria Australia 3043 Ph: + 613 9335 3333 Fax: + 613 9338 9260 email: [email protected] EMC Technologies Report No. M031214-IC (IC: 2813A-K78205) Page 2 of 40 This document shall not be copied or reproduced, except in full without the written permission of the Technical Director , EMC Technologies Pty. Ltd. The certificate on page 3 may be reproduced in full. www. emctech.com.au CONTENTS 1.0 General Information ...................................................................................................................... 3 2.0 Description of Device ................................................................................................................... 4 2.1 DESCRIPTION OF TEST SAMPLE................................................................................................ 4 2.2 TEST SAMPLE ACCESSORIES.................................................................................................... 4 2.2.1 Battery Types....................................................................................................................................4 2.3 TEST SIGNAL, FREQUENCY AND OUTPUT POWER...................................................................... 4 2.4 CONDUCTED POWER MEASUREMENTS...................................................................................... 4 2.5 BATTERY STATUS.................................................................................................................... 5 2.6 DETAILS OF TEST LABORATORY................................................................................................ 5 2.6.1 Location ...........................................................................................................................................5 2.6.2 Accreditations ..................................................................................................................................5 2.6.3 Environmental Factors.....................................................................................................................5 3.0 DESCRIPTION OF SAR MEASUREMENT SYSTEM.................................................................... 6 3.1 PROBE POSITIONING SYSTEM................................................................................................... 6 3.2 E-FIELD PROBE TYPE AND PERFORMANCE................................................................................ 6 3.3 DATA ACQUISITION ELECTRONICS............................................................................................. 6 3.4 CALIBRATION AND VALIDATION PROCEDURES AND DATA............................................................ 6 3.4.1 Validation Results (900 MHz and 1800 MHz)..................................................................................6 3.4.2 Deviation from reference validation values .....................................................................................7 3.4.3 Liquid Depth 15cm ...........................................................................................................................7 3.5 PHANTOM PROPERTIES (SIZE, SHAPE, SHELL THICKNESS, TISSUE MATERIAL PROPERTIES) ....... 8 3.5.1 Temperature and Humidity ..............................................................................................................9 3.6 SIMULATED TISSUE COMPOSITION USED FOR SAR TEST........................................................... 9 3.7 DEVICE HOLDER FOR DASY4................................................................................................... 9 4.0 SAR Measurement Procedure Using DASY4........................................................................... 10 5.0 MEASUREMENT UNCERTAINTY ............................................................................................... 11 6.0 Equipment List and Calibration Details .................................................................................... 13 7.0 SAR Test Method ........................................................................................................................ 14 7.1 DESCRIPTION OF THE TEST POSITIONS (BODY SECTIONS)........................................................ 14 7.2 LIST OF ALL TEST CASES (ANTENNA IN/OUT, TEST FREQUENCIES, USER MODES ETC) ............. 14 7.3 FCC RF EXPOSURE LIMITS FOR OCCUPATIONAL/ CONTROLLED EXPOSURE............................. 14 7.4 FCC RF EXPOSURE LIMITS FOR UN-CONTROLLED/NON–OCCUPATIONAL................................. 14 8.0 SAR Evaluation Results ............................................................................................................. 15 8.1 SAR MEASUREMENT RESULTS FOR 850 MHZ......................................................................... 15 8.2 SAR MEASUREMENT RESULTS FOR 1900 MHZ....................................................................... 16 9.0 Compliance statement.................................................................…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC11issue test report consist of 97 PagesPage 1 (97) BLUETOOTH TM is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM TTI-P-G-166/98-30 Accredited Bluetooth Test Facility (BQTF) Test report no.: 4_0551-01-03/02 FCC Part 24 and Part 22 GM48 FCC ID: PY76220501-BV CETECOM – ICT Services GmbH Untertürkheimerstr. 6-10 66117 Saarbrücken, Germany Telephone: + 49 (0) 681 / 598-0 Fax: + 49 (0) 681 / 9075 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 2 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. 1.2Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telefone: + 49 681 598 - 9100 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom.de Accredited testing laboratory DAR-registration number : TTI-P-G-166/98-30 Accredited Bluetooth TM Test Facility (BQTF) BLUETOOTH TM is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 3 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 1.3Details of applicant Name : Sony Ericsson Mobile Communication AB Street : Nya Vattentornet City : 22188 Lund Country : Sweden Telephone : +46-46-193-242 Telefax : +46-46-193-295 Contact : Mr. Bo Johansson Telephone : +46-46-193-242 1.4Application details Date of receipt of application : 25.02.2002 Date of receipt of test item : 25.02.2002 Date of test : 25.02.-26.02.2002 1.5Test item Type of equipment : Dual Band PCS module (PCS 850 and PCS1900) Type designation:GM48 / 6220501-BV Manufacturer:Applicant Street: City: Country: Serial number:IMEI 001003-83-033173-5 Additional informations: : Frequency:1850 – 1910 MHz and 824 – 849 MHz Type of modulation:300KF2D Number of channels :300 (PCS1900) and 125 (PCS850) Antenna:coax socket and dedicated dual band antenna Power supply:3.6V DC via socket Output power PCS 850:cond. 30.47 dBm Peak , ERP 27.0 dBm (Burst); EIRP: 29.0 dBm (Burst) Output power PCS 1900:cond 31.45 dBm Peak , ERP 27.51 dBm (Burst); EIRP: 29.61 dBm (Burst) Type of equipment:Temperature range : -30°C - +60°C FCC – ID:PY76220501-BV Hardware:P1D Software:R1A017 1.6Test standards: FCC Part 22 and Part 24 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 4 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 2 Technical test The radiated measurements were performed vertical and horizontal over the whole frequency range. We start at 1 m high with vertical receiving antenna and rotate the dish continuously. During rotation we use the antenna lift system to vary the high from 1 to 4 m. So we find maximum radiation output. At this points we do manual remeasurements. After this we do the same measurements in horizontal position of the receiving antenna. This (horizontal and vertical) is made for all the three planes of the test sample. We use the maximum received results. The detector function and selection of bandwidth are according ANSI C63.2-1996 item 8.2.1 and ANSI C63.4-1992 Item 4.2. Antennas are conform with ANSI C63.2-1996 item 15. 150 kHz - 30 MHz: Quasi Peak measurement, 9kHz Bandwidth, passive loop antenna. 30 MHz - 200 MHz: Quasi Peak measurement, 120KHz Bandwidth, biconical antenna 200MHz - 1GHz: Quasi Peak measurement, 120KHz Bandwidth, log periodic antenna 1GHz: Average, RBW 1MHz, VBW 10 MHz, wave guide horn 2.1Summary of test results We did measurements for PCS 850 with the same parameters as for PCS 1900. No deviations from the technical specification(s) were ascertained in the course of the tests performed. FINAL VERDICT: PASS Technical responsibility for area of testing : 2002-03-11RSC 8414 Ames H.. DateSectionNameSignature Technical responsibility for area of testing : 2002-03-11RSC8412Hausknecht D. DateSectionNameSignature CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 5 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 2.2Testreport TEST REPORT Test report no. : 4_0551-01-03/02 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 6 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) TEST REPORT REFERENCE LIST OF MEASUREMENTS PARAMETER TO BE MEASURED ParagraphPAGE Part PCS 1900 POWER OUTPUT SUBCLAUSE § 24.2328 FREQUENCY STABILITY SUBCLAUSE § 24.23510 AFC FREQ ERROR vs. VOLTAGE11 AFC FREQ ERROR vs. TEMPERATURE11 EMISSIONS LIMITS §24.23813 CONDUCTED SPURIOUS EMISSIONS32 OCCUPIED BANDWIDTH §2.98941 PART PCS 850 POWER OUTPUT SUBCLAUSE § 24.232 48 FREQUENCY STABILITY SUBCLAUSE § 24.23550 AFC FREQ ERROR vs. VOLTAGE51 AFC FREQ ERROR vs. TEMPERATURE51 EMISSIONS LIMITS §24.23853 CONDUCTED SPURIOUS EMISSIONS68 OCCUPIED BANDWIDTH §2.98977 CONDUCTED EMISSIONS § 15.107/20784 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 7 (97)…

Text truncated - open the document above for the full version.

Mobile Payment Terminal Model No.: K78-205 FCC ID: P3A- K78-205 Applicant: Keycorp Limited Level 5, Keycorp Tower 799 Pacific Highway Chatswood NSW 2067 Sydney Australia Tested in Accordance With Federal Communications Commission (FCC) 47 CFR, PARTS 2, 22 and 24 (Subpart E) UltraTech's File No.: KYC-012FCC22-24 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: February 11, 2004 Report Prepared by: Dan Huynh Issued Date: February 11, 2004 Tested by: Hung Trinh, RFI Technician Test Dates: January 28 - February 2 & 11, 2004 ƒ The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. ƒ This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] 2 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 00-034 FCC PARTS 2 & 22 and 24(E) Contents i Mobile Payment Terminal, Model K78-205 FCC ID: P3A- K78-205 ULTRATECH GROUP OF LABS File #: KYC-012FCC22-24 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 February 11, 2004 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected], Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. SUBMITTAL CHECK LIST ........................................................................................................................................ 1 EXHIBIT 2. INTRODUCTION .......................................................................................................................................................... 2 2.1. SCOPE .......................................................................................................................................................................................... 2 2.2. RELATED SUBMITTAL(S)/GRANT(S)..................................................................................................................................... 2 2.3. NORMATIVE REFERENCES ..................................................................................................................................................... 2 EXHIBIT 3. PERFORMANCE ASSESSMENT ............................................................................................................................... 3 3.1. CLIENT INFORMATION ............................................................................................................................................................ 3 3.2. EQUIPMENT UNDER TEST (EUT) INFORMATION............................................................................................................... 3 3.3. EUT’S TECHNICAL SPECIFICATIONS.................................................................................................................................... 4 3.4. LIST OF EUT’S PORTS............................................................................................................................................................... 4 3.5. ANCILLARY EQUIPMENT ........................................................................................................................................................ 4 EXHIBIT 4. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS................................................. 5 4.1. CLIMATE TEST CONDITIONS ................................................................................................................................................. 5 4.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TEST SIGNALS............................................................... 5 EXHIBIT 5. SUMMARY OF TEST RESULTS................................................................................................................................ 6 5.1. LOCATION OF TESTS................................................................................................................................................................ 6 5.2. APPLICABILITY & SUMMARY OF EMISSION TEST RESULTS.......................................................................................... 6 5.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES.......................................................... 6 5.4. DEVIATION OF STANDARD TEST PROCEDURES ............................................................................................................... 6 EXHIBIT 6. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS ................................................ 7 6.1. TEST PROCEDURES .................................................................................................................................................................. 7 6.2. MEASUREMENT UNCERTAINTIES ........................................................................................................................................ 7 6.3. MEASUREMENT EQUIPMENT USED ..................................................................................................................................... 7 6.4. ESSENTIAL/PRIMARY FUNCTIONS AS DECLARED BY THE MANUFACTURER .......................................................... 7 6.5. RF POWER OUTPUT [§§ 2.1046 & 24.232] ...................................................................................... ......................................... 8 6.6. BAND-EDGE CONDUCTED EMISSIONS [§§ 2.1051, 22.917& 24.238] ................................................................................. 9 6.7. TRANSMITTER SPURIOUS/HARMONIC RADIATED EMISSIONS [§§ 2.1053, 22.917 & 24.238]................................... 14 EXHIBIT 7. MEASUREMENT UNCERTAINTY...........…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 1 Radiated Emissions at 3 Meters Distance ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 2 Radiated Emissions at 3 Meters Distance ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 3 Radiated Emissions at 3 Meters Distance ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 4 Radiated Emissions at 3 Meters Distance ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 5 Radiated Emissions at 3 Meters Distance ANNEX 1 - TEST SETUP PHOTOGRAPHS Keycorp Limited Mobile Payment Terminal, Model K78-205 FCC ID: P3A-K78-205 IC: 2813A-K78205 A1 - 6 Radiated Emissions at 3 Meters Distance