P3A-K78-YYYLP9100 OR K78-204

N OT ICE T O L INK P OINT 9100 U SERS CUSTOM E R INF O R M A T ION - GEN E R A L REQUI R EM ENTS T h is equipm ent com p lies with Part 68 of the FC C rul e s and t he req u irem ents ado pted b y th e A C T A . On th e re ar of this equipm ent i s a lab e l that cont ains, amo n g oth e r inf o rmati on, a pro duct identi f ier i n the form at U S :AA AEQ##T XXXX . If request ed, thi s num b e r must be pro v ided t o the tel epho ne co m pan y . Applica b le cer t ificati o n jack U n i v ers a l Ser v ice Order Cod e s (“U SOC”) for the E quip m ent is R J 11C. If ser v ice fr om th e lo cal telep hone i s requ ested th e y w ill re quir e Facilit y I n terfa c e C ode (“FIC” ) and Ser v ice Order Cod e (“SOC”). T hese are a s follo w s : (a) Facilit y In terfac e Cod e (“FIC”) 02LS2 (b) Ser v ice Order Code ( “ SOC”) 9.0 Y A plug and ja ck use d to connec t this eq uipment t o the prem ises w i ring a nd tele phone n e t w ork m u st compl y w i th th e applica b le F CC P a rt 68 rul e s a nd re quir e ments ado pted b y t he ACT A . A com p lia nt tele phon e cor d an d mod u lar p l ug i s pro v ide d w i th t h is pr oduct. It is des igne d to be co nnect ed to a compati b le mo dular j a ck that is als o com p liant. T he Ringer Equi v a l ence Num ber (REN ) is used to deter m i ne the num ber of de v i ces th at ma y b e connect ed to a telepho ne line. E xce ssi v e RENs o n a tele phone lin e ma y resu l t in the de v i ce s not ri nging in res ponse t o an incomi ng call. In most b u t not a ll ar eas, the s u m of REN s should not e xceed five (5.0). T o be c e rt ain of the numb e r of de v i ces t hat ma y be connect ed to a lin e, as determin ed b y the total RENs, co nt act the local telep h o ne compan y. T he REN for this product is part of t he pro d u c t identifi e r that has the form at US:A AA EQ##T XXXX. T he d i gits repr esent ed b y ## are th e RE N w i t hout a deci m al p o i n t (e.g ., 03 is a REN of 0.3). If this equi pment , LP 9100, ca uses h a rm t o the tele phon e net work, the tel epho ne co mpan y w i ll notif y you in ad v anc e tha t temporar y disco ntinu ance of ser v ice ma y be require d. But if ad v anc e notice is n't practical, t he tele pho ne compa n y w i l l notif y the custo m er as soon as possibl e. Also, y o u w ill be ad v i s ed of your right to file a c o mpla int with the FCC if you belie v e i t is ne cessa r y . T he teleph one comp an y m a y m a ke chan ges in its facilit ies, e quipme n t, o perati o n s or proce dures that could aff e ct t h e operatio n of the equ i p ment. If thi s h appe ns, the tele phon e co mpan y will pro v id e a d vance notic e in ord e r for you to m a k e necessa r y mo dificati ons to m a intai n uni nt errupted ser v ic e. If troubl e is e x perie nced w i t h this equi p m ent LP 9100 , for re pair or warrant y info rmation, pleas e con t act y our ser v ic e pro v ider. If th e equ i p ment is caus ing h a rm to t he tel epho n e net w o rk, th e tele p hone c o mpa n y ma y request that you disconn ect th e equi p m ent un til the probl e m is resol v ed. T h is equipme n t is of a t y pe t hat is not int e nded to be re paire d. T h is equipment mus t not be us ed on p a r t y li nes. Co nnecti on to part y lin e ser v ic e is subject t o state t a riffs. Cont act the state pu blic ut ilit y co mmission , publ ic ser v ic e com m issio n or c o rporati on co mmissi on for in formati on. FCC INFO RM A T I O N TO USE R S NOT E : T h is equipment has been test ed a nd found to comp l y w i t h the limits for a Class A digital de vic e , pursuant to Par t 15 of the FCC Rules . T hese limit s ar e de signed to pro v id e re asonabl e pr otecti on against harm f ul i n ter f erence w h e n th e equipm ent is op erat ed in a com m erci al en v i ron m ent. T h is e quipme n t gen erates, uses, an d can ra dia t e radio fre quen c y energ y and, if n o t in stalled and used in a ccordan ce w i t h th e i n structio n ma nual, m a y cau s e h a rmful int e rferenc e to radio communi catio n s. Op eration of this eq uip m ent in a resident ial area is likel y to cau s e harmful inter f eren ce in w h i c h case the user w ill b e requ i r ed to c o rrect t he int e rferenc e at h i s o w n expens e. Warning : Ch ange s or modificati ons not expressl y a ppro v ed by Li nkpoi nt could void the user’s aut hor ity to op erate th e equipm ent RF EXPOS URE W A RNING: For compli a n ce w i th SA R requir e ments, a s epara tio n distanc e of minim u m 2.5cm sha ll be maintain ed to User’s bod y w h en it i s oper ated in RF tra n smitti ng mod e . IM PORT A N T S A F E TY INST RUCTI O NS – TELEC O M M UNICA T I ON C A B L E CAUT ION – T o redu ce the ri sk of fir e , us e onl y N o .26 A W G o r larger t e leco mmuni cation c o rd. IM PORT A N T S A F E TY INST RUCTI O NS – LITHIUM B A TT ER Y CAUT ION – Risk of ex pl osion if ba tter y is replaced b y an i n correct t y pe. Disp o s e of used batt e ries according to th e manufac turer’s instru ctions. NOT E : T he user can replace th e termin a l's main (Ni M H) b a tter y , but the lit hium batter y insid e the unit can onl y be replace d b y a LinkP o int-appr o v ed r epair f a cilit y . L INK P OINT 9100 I NSTALLATION G UIDE © 2003 Li nkPoi n t Internatio nal , Inc. Docu m e nt No: 90 2-MA-019 6 Ver s ion 1. 1 Septem b e r 03 1. L OADING P APER T u rn the terminal over a nd pla c e the unit keybo a rd side d o wn a s sh own in Figure 1. Op en the p ape r cove r , remo ve and discard the core from the previou s p a p e r roll (if ne ce ssary). Inst all the roll of p a pe r onto the te rminal p a per holde rs; ma ke sure the rol l is position e d evenly and turns freely (see Figu re 2 ) . The pri n t (t herm a l) side sho u ld b e fa cing to wa rd t he keyboa rd side of the terminal. Before clo s in g the printe r doo r , extend the p ape r so that a small amount of p a p e r em erg e s from th e p r in ter me ch an is m (s ee F i gu r e 3) . Make …

Text truncated - open the document above for the full version.

Sep. 10, 2003 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: Request for withholding from public disclosure the schematic diagrams and system block diagrams pursuant to an application for certification. Applicant: Keycorp Limited Product: Mobile Payment Terminal Product: Mobile Payment Terminal Model: LP9100 / K78-204 FCC ID: P3A-K78-YYY Dear Sir/Madam We, Keycorp Limited, would like to request that the schematic diagrams, system block diagrams, Parts Lists and Technical Description, submitted with the application for certification be withheld from the public disclosure as per Section 0.459 of FCC Rules. This request is made under the provisions of Section 0.457(d) of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. These sections authorize as a withholding from public inspection materials which would be privileged as a mater of law if retained by the person submitting them, and materials which would not customarily be released to the public by that person. The detailed confidential materials are listed as follows: If you have any queries, please do not hesitate to contact us by our TOLL FREE numbers: OUR TELEPHONE NO.: Yours truly Ken McAnulty Engineering Services Manager

August 29, 2003 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Type Acceptance Application under FCC 47 CFR, Parts 2 and 90 (Subpart I) - Non-Broadcast Radio Transceivers Operating in the frequency bands 806 - 821 MHz (25 kHz Channel Spacing) and 821-824 MHz (12.5 kHz Channel Spacing). Applicant: Keycorp Limited Product: Mobile Payment Terminal Model: LP9100 / K78-204 FCC ID: P3A-K78-YYY Dear Sir/Madam, As appointed agent for Keycorp Limited, we would like to submit the application for certification of the above product. Please review all necessary files uploaded to FCC OET Laboratory Division Electronic Filing Site. The Keycorp Limited Mobile Payment Terminal, Model LP9100 / K78-204 employs a Wavenet Technology Wireless OEM Modem Module certified by FCC (FCC ID: PQS- BM28001, on Dec. 2, 2002). Since, there is no change on the radio module’s operation with exception to the duty cycle (from 10% to 30%), only the following tests are performed to ensure the continuing compliance with different enclosure and power supply conditions: (1) RF output power: to ensure the maximum power still meets the FCC Grant FCC ID: PQS-BM28001 so that the test results from this application can be used for the new application FCC ID: P3A-K78YYY. (2) Transmitter spurious/harmonic radiated emissions. These tests are performed to ensure that the new enclosure and packaging will not affect radiated emissions from the OEM radio transmitter module. (3) RF exposure evaluation for portable application (SAR). (4) 99% occupied bandwidth and emission masks If you have any queries, please do not hesitate to contact us by our TOLL FREE number: OUR TELEPHONE NO.: 1-877-765-4173 Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] UltraTech Group of Labs 31040/SIT C-1376 46390-2049 200093-0 2 00-034 SL2-IN-E-1119R

Annex 2- External Photogr aphs of EUT Photo # 1 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100 Annex 2- External Photogr aphs of EUT Photo # 2 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100 Annex 2- External Photogr aphs of EUT Photo # 3 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100 Annex 2- External Photogr aphs of EUT Photo # 4 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100 Annex 2- External Photogr aphs of EUT Photo # 5 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100 Annex 2- External Photogr aphs of EUT Photo # 5 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 A-LP9100

Annex 3 - Internal Phot ogr aphs of EUT Photo # 1 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 2 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 3 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 4 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 5 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 6 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 7 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 8 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 9 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 10 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 11 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 11 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 12 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 13 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 13 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 14 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100 Annex 3 - Internal Phot ogr aphs of EUT Photo # 15 Mobile Pa yment Terminal, Model LP9100, K78-204 FCC ID: P3 —LP9100

Mobile Payment Terminal Model No.: LP9100, K78-204 Tested For Keycorp Limited Keycorp Tower Level 5, 799 Pacific Highway Chatswood NSW 2067 In Accordance With SAR (Specific Absorption Rate) Requirements using guidelines established in IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C Edition 01-01), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) UltraTech's File No.: KYC-009-SAR This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: September 3, 2003 Report Prepared by: JaeWook Choi, SAR System Engineer Tested by: JaeWook Choi, SAR System Engineer Issued Date: September 5, 2003 Test Dates: August 22, 2003 The results in this Test Report apply only to the sample(s) tested, which has been randomly selected. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Telephone (905) 829-1570 Facsimile (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] SPECIFIC ABSORPTION RATE (SAR) Page 1 IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) Mobile Payment Terminal M/N: LP9100, K78-204 FCC ID : P3A-K78-YYY TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION................................................................................................................................................4 1.1. SCOPE...............................................................................................................................................................................4 1.2. REFERENCES...................................................................................................................................................................4 EXHIBIT 2. PERFORMANCE ASSESSMENT.....................................................................................................................5 2.1. CLIENT AND MANUFACTURER INFORMATION ......................................................................................................5 2.2. DEVICE UNDER TEST (D.U.T.) DESCRIPTION..............................................................................................................5 2.3. LIST OF D.U.T.’S ACCESSORIES:..................................................................................................................................6 2.4. SPECIAL CHANGES ON THE D.U.T.’S HARDWARE/SOFTWARE FOR TESTING PURPOSES.............................6 2.5. ANCILLARY EQUIPMENT .............................................................................................................................................6 2.6. GENERAL TEST CONFIGURATIONS ...........................................................................................................................6 2.6.1. Equipment Configuration...........................................................................................................................................6 2.6.2. Exercising Equipment.................................................................................................................................................7 2.7. SPECIFIC OPERATING CONDITIONS......................................................................................................................................7 2.8. BLOCK DIAGRAM OF TEST SETUP ............................................................................................................................. 8 EXHIBIT 3. SUMMARY OF TEST RESULTS......................................................................................................................9 3.1. LOCATION OF TESTS.....................................................................................................................................................9 3.2. APPLICABILITY & SUMMARY OF SAR RESULTS.....................................................................................................9 EXHIBIT 4. MEASUREMENTS, EXAMINATIONS & TEST DATA ..............................................................................10 4.1. TEST SETUP ...................................................................................................................................................................10 4.2. PHOTOGRAPH OF D.U.T. ...................................................................................................................................................11 4.3. PHOTOGRAPHS OF D.U.T. POSITION ........................................................................................................................15 4.3.1. Body Configuration..................................................................................................................................................15 4.3.1.1. Hand held.................................................................................................................................................................................15 4.3.1.2. By stander................................................................................................................................................................................19 4.4. MAXIMUM PEAK SPATIAL-AVERAGE SAR........................................................................................................................21 4.4.1. Maximum Peak Spatial-average SAR Data..............................................................................................................21 4.4.2. Maximum Peak Spatial-Average SAR Location.......................................................................................................21 4.5. SAR MEASUREMENT DATA..............................................................................................................................................22 4.5.1. Body Config…

Text truncated - open the document above for the full version.

UltraTech Group of Labs September 5, 2003 Keycorp Limited Keycorp Tower Level 5, 799 Pacific Highway Chatswood NSW 2067 Australia Attn.: Mr. Ken McAnulty Subject: Verification Testing in accordance with SAR (Specific Absorption Rate) requirements using guidelines established in: IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C Edition 01-01) Industry Canada RSS-102 (Issue 1) ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) Product: Mobile Payment Terminal Model: LP9100, K78-204 Dear Mr. McAnulty, The product sample has been tested in accordance with SAR (Specific Absorption Rate) requirements using guidelines established in IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102 (Issue 1)and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1), and the results and observation were recorded in the engineering report, Our File No.: KYC-009-SAR Enclosed you will find a copy of the engineering report. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering Encl. 31040/SIT A96/TH/0093 46390-2049 200093-0 2 00-034 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Telephone (905) 829-1570 Facsimile (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

August 29, 2003 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Type Acceptance Application under FCC 47 CFR, Parts 2 and 90 (Subpart I) - Non-Broadcast Radio Transceivers Operating in the frequency bands 806 - 821 MHz (25 kHz Channel Spacing) and 821- 824 MHz (12.5 kHz Channel Spacing). Applicant: Keycorp Limited Product: Mobile Payment Terminal Model: LP9100 / K78-204 FCC ID: P3A-K78-YYY Dear Sir/Madam, As appointed agent for Keycorp Limited, we would like to submit the application for certification of the above product. Please review all necessary files uploaded to FCC OET Laboratory Division Electronic Filing Site. The Keycorp Limited Mobile Payment Terminal, Model LP9100 / K78-204 employs a Wavenet Technology Wireless OEM Modem Module certified by FCC (FCC ID: PQS- BM28001, on Dec. 2, 2002). Since, there is no change on the radio module’s operation with exception to the duty cycle (from 10% to 30%), only the following tests are performed to ensure the continuing compliance with different enclosure and power supply conditions: (1) RF output power: to ensure the maximum power still meets the FCC Grant FCC ID: PQS-BM28001 so that the test results from this application can be used for the new application FCC ID: P3A-K78YYY. (2) Transmitter spurious/harmonic radiated emissions. These tests are performed to ensure that the new enclosure and packaging will not affect radiated emissions from the OEM radio transmitter module. (3) RF exposure evaluation for portable application (SAR). (4) 99% occupied bandwidth and emission masks If you have any queries, please do not hesitate to contact us by our TOLL FREE number: OUR TELEPHONE NO.: 1-877-765-4173 Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] UltraTech Group of Labs 31040/SIT C-1376 46390-2049 200093-0 2 00-034 SL2-IN-E-1119R August 29, 2003 Keycorp Limited. Keycorp Tower, Level 5 799 Pacific Highway Chatswood NSW 2067 Sydney, Australia Attn.: Mr. Ken McAnulty Subject: Type Acceptance Application under FCC 47 CFR, Parts 2 and 90 (Subpart I) - Non-Broadcast Radio Transceivers Operating in the frequency bands 806 - 821 MHz (25 kHz Channel Spacing) and 821- 824 MHz (12.5 kHz Channel Spacing). Product: Mobile Payment Terminal Model: LP9100 / K78-204 FCC ID: P3A-K78-YYY Dear Mr. McAnulty, The product sample has been tested in accordance with FCC 47 CFR, Parts 2 and 90 (Subpart I) - Licensed Non-Broadcast Radio Transceiver Operating in the frequency band 806-821 and 821-824 MHz, and the results and observation were recorded in the engineering report, Our File No.: KYC-009F90 Enclosed you will find copy of the engineering report. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering Encl. 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] UltraTech Group of Labs 31040/SIT C-1376 46390-2049 200093-0 2 00-034 SL2-IN-E-1119R Mobile Payment Terminal Model No.: LP9100 / K78-204 FCC ID: P3A-K78-YYY Applicant: Keycorp Limited Keycorp Tower, Level 5 799 Pacific Highway Chatswood NSW 2067 Sydney, Australia Tested in Accordance With Federal Communications Commission (FCC) 47 CFR, Parts 2 and 90 (Subpart I) UltraTech's File No.: KYC-009F90 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: August 29, 2003 Report Prepared by: William Truong Issued Date: August 29, 2003 Tested by: Hung Trinh, RFI/EMI Technician Test Dates: August 25-28, 2003 ƒ The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. ƒ This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: tri.ultratech-labs.com 2 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 00-034 FCC Parts 2 & 90, Subpart I, Licensed Non-Broadcast Radio Transceivers Contents i Mobile Payment Terminal, Model LP9100 / K78-204 FCC ID: P3A-K78-YYY ULTRATECH GROUP OF LABS File #: KYC-009F90 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 August 29, 2003 Tel.: 905-829-1570, Fax. : 905-829-8050 All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. SUBMITTAL CHECK LIST .................................................................................................................. 1 EXHIBIT 2. INTRODUCTION .................................................................................................................................... 2 2.1. SCOPE........................................................................................................................................................................ 2 2.2. RELATED SUBMITTAL(S)/GRANT(S)............................................................................................................................ 2 2.3. NORMATIVE REFERENCES.......................................................................................................................................... 2 EXHIBIT 3. PERFORMANCE ASSESSMENT .........................................................................................................3 3.1. CLIENT INFORMATION................................................................................................................................................ 3 3.2. EQUIPMENT UNDER TEST (EUT) INFORMATION..............................................................…

Text truncated - open the document above for the full version.