P4E-SMARTPIN-8Inductive Proximity Card Reader

Proximity Card Reader SmartID Ref. V10-122006 This manual is applicable for the following SmartID products: • 800-8002 SmartID/EM4102 • 800-8003 SmartID/EM4102/RS232/RO • 800-8001 SmartID/EM4102/pin • 800-8015 SmartID/Hitag1&2 • 800-8016 SmartID/Hitag1&2/RW • 800-8008 SmartID/Hitag1&2/PIN • 800-8025 Mifare Serial number Reader/Rs232 • 800-8030 ISO14443-3 Mifare Sector reader • 800-8045 ISO14443-3 Mifare Sector reader and pinpad • 800-8062 SmartID/ISO14443-3/MifareDual/RO • 800-8077 SmartID/ISO14443-3/PIN/MifareDual • 800-8060 ISO14443-4 DESFire reader (PIV II) • 800-8061 ISO14443-4 DESFire reader • 800-8076 ISO14443-4DESFire PINpad reader • 800-8075 ISO14443-4DESFire PINpad reader (PIV II) • 800-8063 ISO14443-4 DESFire and Mifare reader • 800-8078 ISO14443-4 DESFire and Mifare PINpad reader • 800-8080 ISO14443-4 reader (ISO7816-4, PIV II) • 800-8085 ISO14443-4 PINpad reader (ISO7816-4, PIV II) • 800-8081 ISO14443-4 PINpad reader (ISO7816-4 and Mifare, PIV II) • 800-8086 ISO14443-4 PINpad reader (ISO7816-4 and Mifare, PIV II) • 800-8100 SmartTRANS • 800-8110 SmartTRANS + PIN • 800-8150 SmartID/Legic • 800-8153 SmartID/Legic/PIN Extra options for these readers. • 500-0300 Reader Tamper switch • 500-9287 SmartID/Mountingplate/Grey (Spacer) • 500-8090 SmartID/SPMD (Switch Box Mounting Device) 2 Table of content: Features.............................................................4 Mullion Mounting...............................................5 Indications.........................................................5 Connections.......................................................5 Output protocols................................................6 Security.............................................................6 Specifications.....................................................6 Typical read range with an ISO Card......................6 Power Supply......................................................6 Power requirements.............................................7 Interface............................................................7 Dimensions........................................................7 Material.............................................................7 Operating temperature........................................7 Certifications......................................................7 Cable Distance....................................................9 SIA recommended cable type for Wiegand signals...9 Wiegand Signal Levels.........................................9 Reader output interface and pull-up resistors........10 Timing...............................................................11 Installation instruction.....................................12 Mullion Mounting..............................................14 Connector Assignments....................................15 Tamper Switch..................................................16 Mounting tool....................................................17 Mounting Plate (Spacer)...................................19 Notes ...............................................................20 3 Features The Smart ID Reader has a slim door style mountable design to match any decor. The sunk LED’s and buzzer allow the Smart ID Readers to be mounted indoors and outdoors. The Smart ID Reader accepts 5 to 12 Volts DC. The reader output formats like clock-and-data magstripe (ABA / ISO7811), Wiegand and a number of other formats are determined by the personalization of the card or configuration of the reader. The 5 Volt DC capability allows the replacement of older reader systems without rewiring or pulling new cables. The Smart ID Reader offers high reliability, consistent read characteristics and low power consumption. Within the Smart ID Proximity Reader Family also models with a RS232/RS422/RS485 interface are available for read-only and read/write operations. The Smart ID Reader Family supports both the 125KHz and 13.56MHz technologies. Different models are available for EM4102, HiTAG1 and 2, Mifare, DESFire, Legic and I·Code technology. Standard capabilities include Host system controlled red and green LED’s and a buzzer. 4 The Smart ID Reader can be mounted on any surface without relevant performance degradation. For mounting on a metal surface a spacer is advised. Our commitment is to bring non-propriety, open Radio Frequent Identification (RFID) systems to the market demonstrated with the Smart ID Reader Family. Mullion Mounting The Smart ID Readers can be mounted on a door mullion. Optional there is a mounting kit available in case the small Smart ID reader will be mounted over a wall box (mounting US back box, vertical 84 milimeter (3.31 inch), mounting European back box, horizontal 60 millimeter (2.36 inch)). Indications When a proximity card is decoded successfully the with the card associated code is send to the Host system and the buzzer sounds a short 3KHz beep. Both LED’s and the buzzer are also controllable by the Host system. Connections The Smart ID Reader Family has a flexible and reliable connector interface. The space for the cable and the connector within the Smart ID housing can be sealed with silicone to withstand harsh environmental conditions. 5 Output protocols The Smart ID Reader Family can operate with any facility, system or card coding scheme. The output format, contents and length are determined by the personalization of the card or configuration of the reader. Output formats like magstripe, Wiegand and several others are available. The readers are intended for connection to an Access Control Panel where compatibility to the reader is referenced in the control unit’s installation instructions. Security Depending on the model and the RF technology used the Smart ID Reader Family offers high security challenge response schemes to protect the RFID air interface against various attacks schemes like record & playback attacks. Specifications Typical read range with an ISO Card EM4102 up to 7.5 cm (2.9 in…

Text truncated - open the document above for the full version.

TNO Electronic Products & Services (EPS) B.V. Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.tno-eps.com T +31 594 505005 F +31 594 504804 E [email protected] Subject Request for confidentiality Date September 14, 2007 Our reference 07053104.B22 Your reference - Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands ATCB Att. Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Dear Mrs. Bosley: Pursuant to section 0.457 of the FCC rules we herewith request the following exhibits, rela ted to this application for FCC ID: P4E-SMARTPIN-8, to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to otherparties than Integrated Engineering and TNO Electronic Products & 1. Bill of materials 2. Circuit diagram 3. Block diagram 4. Theory of operation The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, TNO Electronic Products & Services (EPS) B.V. P. de Beer Approvals & Quality Manager

To whom it may concern, This letter confirms the agreement that: TNO Electronic Products & Services (EPS) B.V. Smidshornerweg 18 9822 TL Niekerk The Netherlands Phone number: +31 594 505005 Fax number: +31 594 504814 is authorized as an agent for Integrated Engineering BV Paasheuvelweg 20 1105 BJ Amsterdam The Netherlands This agent authorization includes: -signing application forms and act on behalf of Integrated Engineering BV -receiving and exchanging data between Integrated Engineering BV and worldwide national authorities regarding the -certification of- and/or -arranging type approvals for the following product: proximity readers for access control and other purposes. This authorization will expire on December 31, 2007 or upon earlier written notice from Integrated Engineering BV. Yours sincerely,

ANTENNA To whom it may concern, Amsterdam, February 5 th 2007 Integrated Engineering BV Paasheuvelweg 20 1105 BJ Amsterdam The Netherlands We declare that the antenna on the Smartreader board mounted in the ISO14443/Bio008 (13.56 MHz) access control reader is a magnetic loop antenna printed on PCB. Yours sincerely, Ir R.J.Holslag Antenna top side PCB Antenna bottom side PCB

TNO Electronic Products & Services (EPS) B.V. Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.tno-eps.com T +31 594 505005 F +31 594 504804 E [email protected] Subject Integrated Engineering P4E-SMARTPIN-8 Date September 25, 2007 Our reference 07053104.B23 Your reference Integrated Engineering Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands ATCB Attn.: W.H. Graff Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Dear Mr. W. H. Graff, Please find our response on your questions related to our filing for our customer Integrated Engineering related to P4E-SMARTPIN-8 Your question: 1.) Please indicate where I may find both the 15.21 Information to User and the 15.19(a)(3) two-part compliance statements. Your label Exhibit indicates this information may be found in the Manual – if so kindly show me where it may be found. Our response: A modified Manual has been added. The proper 15.21 text has been added on page 8 just under the 15.19(a)(3) two-part compliance statements. 2.) The Manual on page 4 appears to indicate that this device can work equally well with 125KHz as well as 13.56MHz devices. Does this also contain a 125KHz unlicensed Intentional Radiator? If so, kindly correct your Application and all Exhibits. Our response: This is a modular system. It will be possible to add modules for 125 kHz cards in the future. The version as uploaded is a 13.56 MHz version only. See test reports for details. 3.) The Label exhibit is incorrect. The proper format is to show ‘FCC [space] ID:” in capital letters only followed by the FCC identifier – all on one line. The identifier can only consist of capital letters and numbers plus a [-] dash. You are required to correct your label Our response: The label has been corrected (see also the label position). The corrected document will be submitted. 4.) Unless you tell me otherwise, I will call this device an “RF ID Card Reader” on the Grant. Is this acceptable? Our response: Since all related products (see all P4E grants on the FCC site) are called “Inductive Proximity Card Reader” we would suggest to keep using the identification: “Inductive Proximity Card Reader” 5.) FYI: It is always helpful to provide some sort of occupied bandwidth spectrum plot in all Unlicensed radio equipment test reports. This is also a requirement recommended by ANSI C63.4. Kindly remember this detail for all future Test Reports. Date September 25, 2007 Our reference 07053104.B23 Your reference Integrated Engineering Page 2 of 2 Our response: Thank you for your suggestion. We will provide future test reports with these plots. Best regards, TNO Electronic Products & Services (EPS) B.V. Pieter de Beer Quality & Approval Manager

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 September 19, 2007 RE: Integrated Engineering B.V. FCC ID: P4E-SMARTPIN-8 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please indicate where I may find both the 15.21 Information to User and the 15.19(a)(3) two- part compliance statements. Your label Exhibit indicates this information may be found in the Manual – if so kindly show me where it may be found. 2.) The Manual on page 4 appears to indicate that this device can work equally well with 125KHz as well as 13.56MHz devices. Does this also contain a 125KHz unlicensed Intentional Radiator? If so, kindly correct your Application and all Exhibits. 3.) The Label exhibit is incorrect. The proper format is to show ‘FCC [space] ID:” in capital letters only followed by the FCC identifier – all on one line. The identifier can only consist of capital letters and numbers plus a [-] dash. You are required to correct your label 4.) Unless you tell me otherwise, I will call this device an “RF ID Card Reader” on the Grant. Is this acceptable? 5.) FYI: It is always helpful to provide some sort of occupied bandwidth spectrum plot in all Unlicensed radio equipment test reports. This is also a requirement recommended by ANSI C63.4. Kindly remember this detail for all future Test Reports. William H. Graff President mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

TNO Electronic Products & Services (EPS) B.V. Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.eps-tno.com T +31 594 505005 F +31 594 504804 E [email protected] Subject Cover letter Date September 14, 2007 Our reference 07053104.B2 1 Your reference - Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands ATCB Att. Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Dear Mrs. Bosley: On behalf of our customer Integrated Engineering we would like to apply for an FCC certification of the following device: FCC ID : P4E-SMARTPIN-8 Brand : Integrated Engineering Model : SmartreaderII/8Pin Description : 13.56 MHz Inductive Proximity Card Reader The following PDF files (exhibits) are electronically submitted: 1. Cover letter (this letter). 2. Request for confidentiality 3. Authorization letter 4. Form 731 5. Antenna information 6. Bill of materials 7. Block diagram 8. Circuit diagram 9. Interior photographs 10. Exterior photographs 11. Label information 12. Operational description 13. Test report in conformity with 47 CFR Part 15 14. Test setup photographs 15. User manual Best regards, TNO Electronic Products & Services (EPS) B.V. P. de Beer Approvals & Quality Manager

Testing and certification of, consultancy and research concerning, electronic and electric appliances, systems, installations and telecommunication systems EXTERIOR PHOTOGRAPHS OF AN INDUCTIVE PROXIMITY CARD READER, OPERATING ON 13.56 MHZ, BRAND INTEGRATED ENGINEERING, MODEL SMARTREADERII/8PIN V01.01 FCC listed Industry Canada VCCI Registered R&TTE, LVD, EMC Notified Body : : : : 90828 IC3501 R-1518, C-1598 1856 TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 Internet: www.tno-eps.com E-mail: [email protected] Project number: 07053104.P02 Page 1 of 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Description of test item Test item : 13.56 MHz Inductive Proximity Card Reader Manufacturer : Integrated Engineering B.V. Brand mark : Integrated Engineering Model : SmartreaderII/8pin V01.01 Serial number(s) : n.a. Applicant information Applicant’s representative : Ir. R. Holslag Company : Integrated Engineering B.V. Address : Paasheuvelweg 20 Postal code : 1105 BJ City : Amsterdam Country : The Netherlands Telephone number : +31 (0) 20 46 20 755 Telefax number : +31 (0) 20 46 20 756 Project number: 07053104.P02 Page 2 of 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Table of contents 1 Photographs of the equipment................................................................................................................................................4 1.1 Front view......................................................................................................................................................................4 1.2 Rare view........................................................................................................................................................................5 Project number: 07053104.P02 Page 3 of 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1 Photographs of the equipment 1.1 Front view Project number: 07053104.P02 Page 4 of 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Project number: 07053104.P02 Page 5 of 5 1.2 Rare view

Label information for Brand: Integrated Engineering Model: Mifare FCC ID: P4E-SMARTPIN-8 Photo: The label will be attached to the bottom of the product. The statement on compability with Part 15 as meant in 47 CFR Part 15.19 (a) (3) will be in the information to the user. The size of the label is about 22mm x 32mm. In line with 47 CFR 15.19, the label will be of polyester film or comparable material with indelibly imprinted marking, fastened by a permanent adhesive, such that detachment is not readily possible. The label is designed to last the expected lifetime of the equipment. Text sample: SmartID /14443/Mifare FCC ID: P4E-SMARTPIN-8 P/N: 800-8030 V1.0 CE YR-WK-S/N: 07-34-1001 Conf: 01SMR-0010 Variants can be: Mifare Serial number Reader/RS232 P/N: 802-8025 ISO14443-3 Mifare Sector reader P/N: 802-8030 ISO14443-3 Mifare Sector reader and pinpad P/N: 802-8045 SmartID/ISO14443-3/MifareDual/RO P/N: 802-8062 SmartID/ISO14443-3/PIN/MifareDual P/N: 802-8077 ISO14443-4 DESFire reader (PIV II) P/N: 802-8060 ISO14443-4 DESFire reader P/N: 802-8061 ISO14443-4DESFire PINpad reader P/N: 802-8076 ISO14443-4DESFire PINpad reader (PIV II) P/N: 802-8075 ISO14443-4 DESFire and Mifare reader P/N: 802-8063 ISO14443-4 DESFire and Mifare PINpad reader P/N: 802-8078 ISO14443-4 reader (ISO7816-4, PIV II) P/N: 802-8080 ISO14443-4 PINpad reader (ISO7816-4, PIV II) P/N: 802-8085 ISO14443-4 PINpad reader (ISO7816-4 and Mifare, PIV II)P/N: 802-8081 ISO14443-4 PINpad reader (ISO7816-4 and Mifare, PIV II)P/N: 802-8086 Desktop Card size reader, ISO-14443, serial P/N: 802-8240

Testing and certification of, consultancy and research concerning, electronic and electric appliances, systems, installations and telecommunication systems INTERIOR PHOTOGRAPHS OF AN INDUCTIVE PROXIMITY CARD READER, OPERATING ON 13.56 MHZ, BRAND INTEGRATED ENGINEERING, MODEL SMARTREADERII/8PIN V01. 01. FCC listed Industry Canada VCCI Registered R&TTE, LVD, EMC Notified Body : : : : 90828 IC3501 R-1518, C-1598 1856 TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 Internet: www.tno-eps.com E-mail: [email protected] Project number: 07053104.P04 Page 1 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Description of test item Test item : 13.56 MHz Inductive Proximity Card Reader Manufacturer : Integrated Engineering B.V. Brand mark : Integrated Engineering Model : SmartreaderII/8pin V01.01 Serial number(s) : n.a. Applicant information Applicant’s representative : Ir. R. Holslag Company : Integrated Engineering B.V. Address : Paasheuvelweg 20 Postal code : 1105 BJ City : Amsterdam Country : The Netherlands Telephone number : +31 (0) 20 46 20 755 Telefax number : +31 (0) 20 46 20 756 Project number: 07053104.P04 Page 2 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Table of contents 1 Photographs of the equipment................................................................................................................................................4 1.1 Front view......................................................................................................................................................................4 1.2 Rare view........................................................................................................................................................................5 1.3 Front view open..............................................................................................................................................................6 1.4 Rare view open ...............................................................................................................................................................7 1.5 PCB side 1 ......................................................................................................................................................................8 1.6 PCB side 2 ......................................................................................................................................................................9 Project number: 07053104.P04 Page 3 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1 Photographs of the equipment 1.1 Front view Project number: 07053104.P04 Page 4 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1.2 Rare view Project number: 07053104.P04 Page 5 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1.3 Front view open Project number: 07053104.P04 Page 6 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1.4 Rare view open Project number: 07053104.P04 Page 7 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 1.5 PCB side 1 Project number: 07053104.P04 Page 8 of 9 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Project number: 07053104.P04 Page 9 of 9 1.6 PCB side 2

Testing and certification of, consultancy and research concerning, electronic and electric appliances, systems, installations and telecommunication systems TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Web: www.tno-eps.com Project number: 07053104.fcc.smartreader Page 1 of 14 TEST REPORT CONCERNING THE COMPLIANCE OF A 13.56 MHZ INDUCTIVE PROXIMITY CARD READER, OPERATING ON 13.56 MHZ, BRAND INTEGRATED ENGINEERING, MODEL SMARTREADERII/8PIN V01.01, WITH 47 CFR PART 15 (AUGUST 14, 2006). FCC listed Industry Canada R&TTE, LVD, EMC Notified Body : : : 90828 IC3501 1856 Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2006-02-01) 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Project number : 07053104.fcc.smartreader Page 2 of 14 MEASUREMENT/TECHNICAL REPORT Integrated Engineering B.V. Model : SmartreaderII/8pin V01.01 FCC ID: P4E-SMARTPIN-8 August 22, 2007 This report concerns: Original grant/certification Class 2 change Verification Equipment type: 13.56 MHz Inductive Proximity Card Reader for (DesFire PIV/Mifare) cards Deferred grant requested per 47 CFR 0.457(d)(1)(ii) ? Yes No n.a. Report prepared by: Name : Ties E.T. Koning Company name : TNO Electronic Products & Services (EPS) B.V. Address : Smidshornerweg 18 Postal code/city : 9822 ZG Niekerk Mailing address : P.O. Box 15 Postal code/city : 9822 TL Niekerk Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : [email protected] The data taken for this test and report herein was done in accordance with 47 CFR Part 15 (August 14, 2006) and the measurement procedures of ANSI C63.4-2003. TNO Electronic Products & Services (EPS) B.V. at Niekerk, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: August 22, 2007 Signature: H.J. Pieters Project Manager TNO Electronic Products & Services (EPS) B.V. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2006-02-01) 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Project number : 07053104.fcc.smartreader Page 3 of 14 Description of test item Test item : 13.56 MHz Inductive Proximity Card Reader Manufacturer : Integrated Engineering B.V. Brand : Integrated Engineering Model : SmartreaderII/8pin V01.01 Serial number(s) : n.a. Revision : n.a. Receipt date : July12, 2007 Applicant information Applicant's representative : Ir. R. Holslag Company : Integrated Engineering B.V. Address : Paasheuvelweg 20 Postal code : 1105 BJ City : Amsterdam PO-box : - Postal code : - City : - Country : The Netherlands Telephone number : +31 (0) 20 46 20 755 Telefax number : +31 (0) 20 46 20 756 Test(s) performed Location : Niekerk Test(s) started : July 17, 2007 Test(s) completed : August 17, 2007 Purpose of test(s) : Equipment Authorization (Original grant/certification) Test specification(s) : 47 CFR Part 15 (August 14, 2006) Test engineers : Ties E.T. Koning Report written by : Ties E.T. Koning. Report date : August 22, 2007 This report is in conformity with NEN-EN-ISO/IEC 17025: 2005 This report shall not be reproduced, except in full, without the written permission of TNO Electronic Products & Services (EPS) B.V. The test results relate only to the item(s) tested. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2006-02-01) 13.56 MHz Inductive Proximity Card Reader Integrated Engineering Integrated Engineering SmartreaderII/8pin V01.01 P4E-SMARTPIN-8 Project number : 07053104.fcc.smartreader Page 4 of 14 Table of contents 1 General information. ..............................................................................................................................................................5 1.1 Product description.........................................................................................................................................................5 1.1.1 Introduction. ...........................................................................................................................................................5 1.2 Related submittal(s) and/or Grant(s). .............................................................................................................................5 1.2.1 General. ..................................................................................................................................................................5 1.2.2 FCC ID P4E-SMARTPIN-8. ..................................................................................................................................5 1.3 Tested system details......................................................................................................................................................5 1.3.1 Description of input and output ports. ....................................................................................................................6 1.4 Test methodology. ..........................................................................................................................................................6 1.5 Test facility.........................…

Text truncated - open the document above for the full version.