P5T-1100CCFWave2Net Wireless LAN Compact Flash Card

AMIBCOM, Inc. 3150 Coronado Dr., Suite A, Santa Clara, CA 95054, USA Tel No.: (408)562-0168 Fax No.: (405)562-0178 Federal Communications Commission Dear Sir: We, the undersigned, hereby authorize ELECTRONICS TESTING CENTER, TAIWAN to act on our behalf in all matters relating to application forWave2Net Wireless LAN Compact Flash Card (Model: WL1100C-CF; FCC ID.: P5T-1100CCF)authorization, including the signing of all documents relating to these matters. Any and all acts carried out by ELECTRONICS TESTING CENTER, TAIWAN on our behalf shall have the same effect as acts of our own. The applicant certifies that in the case of an individual applicant ( e.g., corporation ), no party to the applicant is subject to a denial of federal benefits, that includes FCC benefits, pursuant to section 5301 of the Anti-drug abuse Act of 1988, 21 U.S.C. 862. For a definition of a “party” for these purposes See 47 C.F.R. 1.2002(b). By: By: Vincent Tseng (Signature) (Printed) Title : OEM/ODM Sales Manager Applicant : AMIBCOM, Inc Address : 3150 Coronado Dr., Suite A, Santa Clara, CA 95054, USA Tel : (408)562-0168 Fax: (405)562-0178 Date : AMIBCOM, Inc. 3150 Coronado Dr., Suite A, Santa Clara, CA 95054, USA Tel No.: (408)562-0168 Fax No.: (405)562-0178 Federal Communications Commission FCC ID: P5T-1100CCF Dear Sir: This is to request confidentiality on information submitted for above application. We would like to request confidentiality on some exhibits we submitted for above original application for the reason of trade secret. If those exhibits are available for public inspection, any person who once gets the information contained in those exhibits will be able to design and to make the same products very easily. This is a very serious problem and huge loss for us, because we did invest so much on it. Please be not made the Exhibit Types listed below routinely available for public inspection: Block Diagram and Schematics. By: By: Vincent Tseng (Signature) (Printed) Title : OEM/ODM Sales Manager Applicant : AMIBCOM, Inc Address : 3150 Coronado Dr., Suite A, Santa Clara, CA 95054, USA Tel : (408)562-0168 Fax: (405)562-0178 Date :

From: Will Yauo [[email protected]] Sent: Wednesday, September 04, 2002 8:57 AM To: Mike Kuo Subject: Re: AmbiCom, Inc., FCC ID:P5T-1100CCF, AN02T2188 Hi Mike, I study your reply e-mail carefully. In the FCC reply form RLAFORGE, he mentioned the user must justify the spacing used. There is no clear requirement in the content ,the PCMICIA card need to be performed SAR test. We have submitted the MPE test report, it is including 2.5cm distance test. I know most of laptop computers are used on the desk, in very seldom situation; it will be used on the lap. Even in this situation, it always can maintain at least 2.5 cm between the antenna of this device and all persons. We have made an example using the laptop computer put on the lap. Please see the attachment pictures, it show the distance always maintain at least 2.5cm. We hope you can accept the warning caution in the user manual. It also meet the RLAFORGE e-mail mentioned "the user must justify the spacing used." If you have any instruction, please advise me. Thank you very much. Best regards, Will Yauo / ETC ----- Original Message ----- From: Mike Kuo <[email protected]> To: 'Will Yauo' <[email protected]> Sent: Wednesday, September 04, 2002 5:02 AM Subject: RE: AmbiCom, Inc., FCC ID:P5T-1100CCF, AN02T2188 > Hi Will: > > This device was tested in the laptop computer. I have measured the > separation distance from the antenna to the bottom of laptop computer from > three different laptop manufacturers. None of configuration can provide > 2.5cm separation distance. Let me copy one of FCC instructions to TCB in > discussing this type of device. > > I do not believe when this device used in laptop computer, it can provide > 2.5cm separation distance so SAR test report is required. > > Best Regards > > Mike Kuo > > -----Original Message----- > From: TCB [mailto:[email protected]] > Sent: Thursday, August 22, 2002 6:36 AM > To: [email protected] > Subject: FW: Separation Distance for PCMCIA transceiver with > integralantenna > > > > > -----Original Message----- > From: Raymond Laforge [mailto:[email protected]] > Sent: Thursday, August 22, 2002 8:15 AM > To: [email protected] > Subject: Re: Separation Distance for PCMCIA transceiver with > integralantenna > > > RF exposure evaluation conditions must be as expected in the real world. If > the situation guarantee > 2.5 cm gap than this can be used. If the > situation suggests a gap of < 2.5 cm than this should be used. The FCC has > seen evidences recently that suggest PCMCIA and other standard cards used in > laptops may not guarantee >2.5 cm spacing. > The user must justify the spacing used. > >>> <[email protected]> 08/07/02 07:05PM >>> > For PCMCIA transceiver with integral antenna to be used in the typical > laptop or notebook computer with PCMCIA slots on either side, FCC has > determined in the past that this type of device will be considered as > portable device. However, FCC has previously determined the separation > distance to the body can be at least 2.5cm or in some cases, less than > 2.5cm. By actual measurement the separation distance between the antenna of > PCMCIA card to the bottom of laptop/notebook computer, the separation > distance will be least than 2.5cm. What is FCC policy in determine the > separation distance for this type of device ? > > -----Original Message----- > From: Will Yauo [mailto:[email protected]] > Sent: Tuesday, September 03, 2002 9:24 AM > To: Mike Kuo > Subject: Re: AmbiCom, Inc., FCC ID:P5T-1100CCF, AN02T2188 > > > Hi Mike, > > We can understand this requirement. > For this product, we consider that it should not belong to portable > transmitter. > Sometimes, it will be installed into the fixed device house e.g. Desktop > Computer. > When wireless LAN Card is installed the notebook or laptop computer, it > always can maintained at least 2.5 cm between the antenna of this device and > all persons. > > Anyway, we will ask the manufacturer to add the warning words"Caution" in > the user manual. > (please see the attachment) > > If you have any instruction, please advise us. > Thank you very much. > Best regards, > > Will Yauo / ETC > > ----- Original Message ----- > From: Mike Kuo <[email protected]> > To: Will Yauo (E-mail) <[email protected]>; Will Yauo-Personal (E-mail) > <[email protected]> > Sent: Saturday, August 31, 2002 9:59 AM > Subject: FW: AmbiCom, Inc., FCC ID:P5T-1100CCF, AN02T2188 > > > > > > > > -----Original Message----- > > From: CERTADM > > Sent: Friday, August 30, 2002 6:57 PM > > To: '[email protected]' > > Subject: AmbiCom, Inc., FCC ID:P5T-1100CCF, AN02T2188 > > > > > > Notice_content > > ------------- > > Question #1: The highest conducted output power measured in 0.0295W. > Based > > upon the new TCB exclusion list ( see attached ), this device will require > > SAR tests to demonstrate RF exposure requirement as Portable device. > > > > Once this device is used in the laptop computer, normally it can not > > maintain 2.5cm from the end user when the laptop computer is placed on the > > lap. Based upon the separation distance is less than 2.5cm, the low > > threshold for not requiring SAR is 60/2.437=24.62mW. The reported output > > power ( 29.5mW ) is over the 24.62mW so SAR test is required. > > > > If this device can demonstrate that this device can maintain 2.5cm during > > the normal usage, please provide such information. > > > > Best Regards > > > > Mike Kuo/ Compliance Certification Services > > The items indicated above must be submitted before processing can continue > > on the above referenced application. Failure to provide the requested > > information within 60 days of the original e-mail date may result in > > application dismissal and forfeiture of the filing fee. Also, please note > > that partial responses increase processing time and should not be > submitted. > > Any questions about the content of this correspondence should be directed > to > > the e-mail address listed below the name of the send…

Text truncated - open the document above for the full version.

ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 CONSTRUCTED PHOTOS of EUT Front View of EUT Rear View of EUT

ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 CONSTRUCTED PHOTOS of EUT Internal View of EUT Component View of Main PCB ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 CONSTRUCTED PHOTOS of EUT Solder View of Main PCB

The Wave2Net Wireless LAN CompactFlash Card designed with a transmitting method of direct sequence spread spectrum is for local area network operation, which operates at 2.4 GHz ISM band and data rate up to 11 Mbps. The spread spectrum unit is HFA3861.

Rev. No 2.1 RF Maximum Permissible Exposure Measurement Report of E.U.T. : Wave2Net Wireless LAN CompactFlash Card FCC ID. : P5T-1100CCF MODEL : WL1100C-CF for APPLICANT : AmbiCom, Inc. ADDRESS : 3150 Coronado Dr., Suite A, Santa Clara, CA95054, USA Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34, LIN 5, DING FU TSUN, LINKOU HSIANG, TAIPEI HSIE, TAIWAN, R.O.C. Tel:(02)26023052, 26023054 Fax:(02)26010910 Report Number : ET91R-07-090 ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 TEST REPORT CERTIFICATION Applicant : AmbiCom, Inc. 3150 Coronado Dr., Suite A, Santa Clara, CA95054, USA Manufacturer : AmbiCom, Inc. Taiwan Branch 4F, No. 42, Shin zhone Nei Hu, Taipei, Taiwan, R.O.C. Description of EUT : a) Type of EUT : Wave2Net Wireless LAN CompactFlash Card b) Trade Name : AmbiCom c) Model No. : WL1100C-CF d) Power Supply : From Notebook PC Regulation Applied : IEEE C95.1-1991, FCC 47 CFR Part 1 and Part 2 I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in IEEE C95.1, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relates only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Aug. 19, 2002 Test Engineer : ( S. S. Liou ) Approve & Authorized Signer : Will Yauo, Manager EMC Detp. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 Table of Contents Page 1 GENERAL INFORMATION....................................................................................................... 1 1.1 Product Description...................................................................................................................... 1 1.2 Characteristics of Device ............................................................................................................. 1 1.3 Test Methodology......................................................................................................................... 1 1.4 Test Facility.................................................................................................................................. 1 2 PROVISIONS APPLICABLE...................................................................................................... 2 2.1 Definition...................................................................................................................................... 2 2.2 Relative Requirement for Compliance ......................................................................................... 2 3. SYSTEM TEST CONFIGURATION........................................................................................... 3 3.1 Justification................................................................................................................................... 3 3.2 Devices for Tested System ........................................................................................................... 3 4 M AXIMUM P ERMISSIBLE E XPOSURE M EASUREMENT .................................................................. 4 4.1 Applicable Standard ..................................................................................................................... 4 4.2 Measurement Procedure............................................................................................................... 4 4.3 Measurement Instrument.............................................................................................................. 5 4.4 Power Desity Data........................................................................................................................ 5 4.5 Measurement Setup Photos .......................................................................................................... 6 ETC Report No. : ET91R-07-090 Page 1 of 6 Pages FCC ID.: P5T-1100CCF Rev. No 2.1 1 GENERAL INFORMATION 1.1 Product Description a) Type of EUT : Wave2Net Wireless LAN CompactFlash Card b) Trade Name : AmbiCom c) Model No. : WL1100C-CF d) Power Supply : From Notebook PC 1.2 Characteristics of Device The Wave2Net Wireless LAN CompactFlash Card designed with a transmitting method of direct dequence spread spectrum is for local are network operation, which operates at 2.4GHz ISM band and data rate up to 11 Mbps. 1.3 Test Methodology The Maximum Permissible Exposure (MPE) was performed according to the procedures illustrated in IEEE C95.1-1991. 1.4 Test Facility The open area test site and conducted measurement facility used to collect the radiated data is located on the roof top of Building at No.34, Lin 5, Ding Fu Tsun, Linkou Hsiang, Taipei Hsien, Taiwan, R.O.C. This site has been fully described in a report submitted to the FCC, and accepted in a letter dated Feb. 10, 2000. ETC Report No. : ET91R-07-090 Page 2 of 6 Pages FCC ID.: P5T-1100CCF Rev. No 2.1 2 PROVISIONS APPLICABLE 2.1 Definition MPE in Occupational / Controlled Environments: Persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Also apply to a individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potatial for exposure. MPE in General Population / Uncontrolled Environments: General population / Uncontrilled exposure apply in situation in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment nay not be fully aware of the potatial for exposure or cannot execise control over their exposure. 2.2 Relative Requirement for Compliance (1) MPE for Controlled Enviroments According to section 1.1310 of FCC 47 CFR Part 1, MPE Limits for controlled enviroment are as following: Fr…

Text truncated - open the document above for the full version.

Rev. No 2.1 FCC Part 15 EMI TEST REPORT of E.U.T. : Wave2Net Wireless LAN CompactFlash Card FCC ID. : P5T-1100CCF MODEL : WL1100C-CF for APPLICANT : AmbiCom, Inc. ADDRESS : 3150 Coronado Dr., Suite A, Santa Clara, CA95054, USA Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34, LIN 5, DING FU TSUN, LINKOU HSIANG TAIPEI HSIEN, TAIAWN, R.O.C. Tel:(02)26023052, 26023054 Fax:(02)26010910 Report Number : ET91R-07-090 ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 TEST REPORT CERTIFICATION Applicant : AmbiCom, Inc. 3150 Coronado Dr., Suite A, Santa Clara, CA95054, USA Manufacturer : AmbiCom, Inc. Taiwan Branch 4F. No. 42, Sing Zhong Nei Hu, Taipei, Taiwan, R.O.C. Description of EUT : a) Type of EUT : Wave2Net Wireless LAN CompactFlash Card b) Trade Name : AmbiCom c) Model No. : WL1100C-CF d) Power Supply : From Notebook PC Regulation Applied : FCC Rules and Regulations Part 15 Subpart B & C (2001) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.4, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Aug. 07, 2002 Test Engineer : ( S. S. Liou ) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 Table of Contents Page 1 GENERAL INFORMATION....................................................................................................... 1 1.1 Product Description...................................................................................................................... 1 1.2 Characteristics of Device ............................................................................................................. 1 1.3 Test Methodology......................................................................................................................... 1 1.4 Test Facility.................................................................................................................................. 1 2 PROVISIONS APPLICABLE...................................................................................................... 2 2.1 Definition...................................................................................................................................... 2 2.2 Requirement for Compliance ....................................................................................................... 3 2.3 Restricted Bands of Operation ..................................................................................................... 5 2.4 Labeling Requirement .................................................................................................................. 5 2.5 User Information........................................................................................................................... 6 3. SYSTEM TEST CONFIGURATION........................................................................................... 7 3.1 Justification................................................................................................................................... 7 3.2 Devices for Tested System ........................................................................................................... 7 4 RADIATED EMISSION MEASUREMENT............................................................................... 8 4.1 Applicable Standard ..................................................................................................................... 8 4.2 Measurement Procedure............................................................................................................... 8 4.3 Measuring Instrument................................................................................................................. 10 4.4 Radiated Emission Data ............................................................................................................. 11 4.4.1 RF Portion...............................................................................................................................11 4.4.2 Other Emission........................................................................................................................14 4.5 Field Strength Calculation .......................................................................................................... 14 4.6 Photos of Radiation Measuring Setup ........................................................................................ 15 5 CONDUCTED EMISSION MEASUREMENT........................................................................ 16 5.1 Standard Applicable ................................................................................................................... 16 5.2 Measurement Procedure............................................................................................................. 16 5.3 Conducted Emission Data .......................................................................................................... 17 5.4 Result Data Calculation.............................................................................................................. 18 5.5 Conducted Measurement Equipment ......................................................................................... 18 5.6 Photos of Conduction Measuring Setup ..................................................................................... 19 6 ANTENNA REQUIREMENT.................................................................................................... 20 6.1 Standard Applicable ..................................................................................................…

Text truncated - open the document above for the full version.

ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 Photos of Radiation Measuring Setup ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 Photos of Conduction Measuring Setup

ETC Report No. : ET91R-07-090 FCC ID.: P5T-1100CCF Rev. No 2.1 Measurement Setup Photos