PBCFCD-523FExternal CD-R/CD-RW Drive

1 1. Hold the above upper and below case of the product and draw the upper case. 2.Connect the CD-ROM/CD-RW drive, that is prepared in the below case, to each cable. Connect the cable refer to the drawing and try to connect by the color of the drawing. 3. Put the CD-ROM/CD-RW to the fixing plate as the d r a w i n g . 4 . Tighten up the 4 screws after cover the upper case. 5. Connect the power adapter(AC/DC) to the DC Jack of FCD-523 and connect the AC power cable to the power outlet. -. C a u t i o n : You should be Jumper of CD-ROM/RW to Master on the mount FCD-523. 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW ) 1. How to the Drive(CD-ROM/CD-RW ) 2 1) FCD-523 Case2) Install CD Driver 3) Interface Cable4) Guide Manual 5) Power Adapter6) AC Power Cable 586, Pentium or Greater System can use the Interface port Included CD-ROM Drive or you can download the Driver from Internet web Site. C a u t i o n : Connect the product after carry out the "Tppinst" first C a u t i o n : Use USB2.0 1) If the USB2.0 product is connected to USB1.1 Host Adapter, It will be operated to USB1.1 speed(12Mbps). 2) If you want to use the USB2.0 products as 480Mbps, you have to prepare the USB2.0 Host Adapter which has the USB2.0 Controller. Driver Installation for USB1.1 1. For Window 98/ME/2000 1) Insert the offered installation disk to the floppy drive in Computer. 2) Can find the "Win98" folder in A drive of "My computer" on Window. 3 )Click the Setup.exe file in "Win98" folder of A Dive and the driver will be installed a u t o m a t i c a l l y . 4) Confirm if the power adapter is connected to the outlet and FCD-523 and the turn on the p o w e r . 5) First, connect the USB cable to the interface of FCD-523. 6) Then connect the USB cable to the interface port in Computer. 7) Make sure if the CD-ROM drive icorn is appearing in "My Computer". 2. Package Contains 2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains 2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains2. Package Contains2. Package Contains2. Package Contains2. Package Contains2. Package Contains2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains 2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains2. Package Contains 2. Package Contains 3. System Require m e n t 3. System Require m e n t3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t 3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t 3. System Require m e n t 3. System Require m e n t3. System Require m e n t 3. System Require m e n t3. System Require m e n t3. System Require m e n t3. System Require m e n t 3. System Require m e n t 4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation4. Driver Installation4. Driver Installation4. Driver Installation4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation 4. Driver Installation 4. Driver Installation4. Driver Installation4. Driver Installation 4. Driver Installation4. Driver Installation 4. Driver Installation 3 2. For Window ME 1) Confirm if the power adapter is connected to the outlet and FCD-523 and the turn on the p o w e r . 2) Booting the Windows ME. 3) Connect the offered interface cable to FCD-523. And then connect to USB port in Computer. 4) Can find the message "USB Big capacity preservation installation. 5) Find the model like CD-ROM/CD-RW (ex.:LG LED-8120B USB Device). 6) Coming out to the "USB CD-ROM" confirm if the CD-ROM drive icon is appearing in "My Computer". C a u t i o n : Do not install with the drive in "Win 98" folder of driver installation disk. C a u t i o n : The <usbnt map.sys>file will be required during installation. This file is in the win9x folder in CD of original Window ME. (base 2.cab file). 3. For Window 2000 1) Confi…

Text truncated - open the document above for the full version.

ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab .

FCC ID. : PBCFCD-523F File No. : E023R-050 ONETECH Testing & Evaluation Lab . IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : PBCFCD-523F FCC ID AREA

ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο.: Ε023Ρ−050 ONETECH Testing & Evaluation Lab .

Page 1 of 13 FCC ID.: PBCFCD-523F File No.: E023R-050 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- K un, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . E LECTROMAGNETIC E MISSION C OMPLIANCE R EPORT FOR FCC C LASS B C ERTIFICATION Test report file number : E023R-050 Applicant : SAROTECH CO., LTD. Address: Hangang Bldg. 1549-7, Seocho-Dong, Seocho-Ku, Seoul, 137-070, Korea Manufacture r : SAROTECH CO., LTD. Address: Hangang Bldg. 1549-7, Seocho-Dong, Seocho-Ku, Seoul, 137-070, Korea Type of Equipme nt : Exte rnal CD-ROM/CD-RW Case FCC ID: PBCFCD-523F Model / Type No. : FCD-523F Se rial numbe r: N/ A Total page of Report: 13 pages (including this page) Date of Incoming: January 13, 2002 Date of issuing : March 21, 2002 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 15 SUBPART B, Class B . This test report contains only the result of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: G. W. Lee / Assist.Chief EngineerY. K. Kwon / Chief Engineer EMC Dept.EMC Dept. ONETECH Corp.ONETECH Corp. Page 2 of 13 FCC ID.: PBCFCD-523F File No.: E023R-050 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- K un, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . CONTENTS Page 1. VERIFICATION OF COMPLIANCE ................................................................................................................ 3 2. GENERAL INFORMATION .................................................................................................................................. 4 2.1 P RODUCT D ESCRIPTION ............................................................................................................................................. 4 2.2 R ELATED S UBMITTAL ( S ) / G RANT ( S ) ...................................................................................................................... 4 2.3 T EST S YSTEM D ETAILS .............................................................................................................................................. 5 2.4 T EST M ETHODOLOGY ................................................................................................................................................ 5 2.5 T EST F ACILITY ............................................................................................................................................................ 5 3. SYSTEM TEST CONFIGURATION ................................................................................................................... 6 3.1 J USTIFICATION ............................................................................................................................................................. 6 3.2 EUT EXERCISE S OFTWARE ........................................................................................................................................ 6 3.3 C ABLE D ESCRIPTION .................................................................................................................................................. 6 3.4 N OISE S UPPRESSION P ARTS ON C ABLE ................................................................................................................... 7 3.5 E QUIPMENT M ODIFICATIONS .................................................................................................................................... 7 3.6 C ONFIGURATION OF T EST S YSTEM .......................................................................................................................... 7 4. PRELIMINARY TEST .............................................................................................................................................. 8 4.1 AC P OWER LINE C ONDUCTED E MISSION T EST ..................................................................................................... 8 4.2 R ADIAT ED E MISSION T EST ........................................................................................................................................ 8 5. FINAL RESULT OF MEASURMENT ............................................................................................................... 9 5.1 C ONDUCTED E MISSION T EST .................................................................................................................................... 9 5.2 R ADIAT ED E MISSION T EST ...................................................................................................................................... 11 6. FIELD STRENGTH CALCULATION ............................................................................................................. 12 7. LIST OF TEST EQUIPMENT ............................................................................................................................. 13 Page 3 of 13 FCC ID.: PBCFCD-523F File No.: E023R-050 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- K un, K yunggi- Do 46…

Text truncated - open the document above for the full version.

ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο. : Ε023Ρ−050 ONETECH Testing & Evaluation Lab . ΦΧΧ Ι∆.: ΠΒΧΦΧ∆−523Φ Φιλε Νο. : Ε023Ρ−050 ONETECH Testing & Evaluation Lab .