PEBNAC-2500LRCOMMERCIAL

NAC-2500LR User Manual - 2 - ⓒ Copyright 2006 NITGEN Co., Ltd. All rights reserved NITGEN Customer Service Center Tel. 080-060-1600 (Toll Free) Fax. +82-31-451-6722 E-mail: [email protected] URL: http://www.nitgen.com ‚ Reproduction of part or all of the contents in any form is prohibited other than in accordance with the permissions. ‚ Product specification can be changed and upgraded to improve functionality without prior notice. ‚ NITGEN, NITGEN logo are registered trademark of NITGEN. - 3 - Table of Contents CHAPTER 1. INTRODUCTION .................................................................... 5 1.1 Product Introduction ......................................................................................... 5 1.2 Product Features and Specification .................................................................. 7 CHAPTER 2. HOW TO USE ....................................................................... 12 2.1 Detailed Product Parts .................................................................................... 12 2.2 LCＤ Screen Layout ....................................................................................... 14 2.3 Fingerprint Use ................................................................................................ 15 2.4 Authentication .................................................................................................. 16 2.4.1Fingerprint ................................................................................................... 16 2.4.2Password ...................................................................................................... 21 2.4.3RF Card (optional) ....................................................................................... 22 2.4.3Others: Automatic Attendance Mode ........................................................... 23 CHAPTER 3. ENVIRONMENT SETTING ................................................... 24 3.1 Menu Composition .......................................................................................... 24 3.2 Entering into Menu ......................................................................................... 27 3.3 Basic Menu ....................................................................................................... 28 3.4 Detailed Menu .................................................................................................. 30 3.4.1 User Management ....................................................................................... 30 - 4 - 3.4.2 Fingerprint Sensor Setting .......................................................................... 45 3.4.3 UI (User Interface) Setting ......................................................................... 54 3.4.4 System Setting ............................................................................................ 57 3.4.5 Network Setting ....................................................................................... 66 3.4.6 Cofirmation of Terminal Information ...................................................... 72 3.4.7 Factory Default Setting ............................................................................... 74 APPENDIX 1: NETWORK CONNECTION ERROR AND SOLUTIONS ..... 78 APPENDIX 2: TERMINAL INITIALIZATION ERROR AND SOLUTIONS .. 80 APPENDIX 3: LAW AND REGULATION .................................................... 81 APPENDIX 4: WIEGAND PROTOCOL FORMAT ...................................... 82 APPENDIX 5 : EMERGENCY SCREEN ..................................................... 84 - 5 - Chapter 1. Introduction 1.1 Product Introduction „ Overview The use of biometrics system continuously increases in various authentication systems and in areas that require a higher level of security because of its ease of use and economical benefits. Among a number of biometrics system, a fingerprint recognition system is not only easy to use but also enables economical product development. It takes up the most part of the market as it allows a wide variety of application. NITGEN, a leader in the fingerprint recognition area, has provided fingerprint recognition solutions for the management of PC security, knowledge, safe, access control, electronic payment and financial clearings. Continuous R&D activities and quality management ensure that NITGEN meets evolving needs and demands of the market and the customers. NITGEN access control system is a culmination of world-renowned technologies from NITGEN including fingerprint recognition algorithms, optical sensor, embedded design and software applications. Unlike legacy access control systems that use only password and ID card, it provides the ease of use and tight security with no risk of forgetting password, stolen cards or forgery. The system is designed to provide maximum operational efficiency over the network by enabling remote monitoring on terminals that have been independent so far. NITGEN access control system allows various combinations of FR card, password and fingerprints. It also meets the common set of requirements and special needs in the corporate and - 6 - government sectors with such functions as shortened ID, 1:N matching and voice guidelines. The manual gives in-depth explanation as to how to use NITGEN access control terminal (NAC-2500LR). „ System Components Main Features Server PC 1. Server S/W : Access Sever 2. Terminal communication, log data collection 3. user information & log DB 4. authentication Client PC 1. Client S/W : Remote Manager/Monitor Network Server PC Terminal Client PC NAC-2500 Access Server Remote Manager Remote Monitor - 7 - 2. user registration and other management 3. Terminal status and event monitoring Terminal ( NAC-2500LR ) 1. user check and authentication 2. access door control NITGEN access control terminal(NAC-2500LR) can be used alone for full functionality or can be used in connection with the network together with admin programs (Access Server, Remote Manager, Remote Moni…

Text truncated - open the document above for the full version.

NAC2500 LFD Rev : 1.0 - 1 - Team SE Writer Dennis Yu Date 2007-11-26 NAC2500 LFD Rev : 1.0 - 2 - I. NAC-2500LR Block Diagram NAC2500 LFD Rev : 1.0 - 3 - II. NAC-2500LM Block Diagram NAC2500 LFD Rev : 1.0 - 4 - III. NAC2500 LFD Rev : 1.0 - 5 - IV. System configuration

KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 1 of 4 External photo (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 2 of 4 External photo (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 3 of 4 Adaptor photo (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 4 of 4 Adaptor photo (Rear)

KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 1 of 1 Label location FCC Label Location

KTI07EF12003 FCC ID:- Korea Technology Institute Co., Ltd. Page 1 of 1 FCC ID Sample Label

KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 1 of 14 Internal photo 1 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 2 of 14 Internal photo 1 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 3 of 14 Internal photo 2 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 4 of 14 Internal photo 2 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 5 of 14 Internal photo 3 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 6 of 14 Internal photo 3 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 7 of 14 Internal photo 4 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 8 of 14 Internal photo 4 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 9 of 14 Internal photo 5 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 10 of 14 Internal photo 5 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 11 of 14 Internal photo 6 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 12 of 14 Internal photo 6 (Rear) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 13 of 14 Internal photo 7 (Front) KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 14 of 14 Internal photo 7 (Rear)

KTI07EF12003 FCC ID: - Korea Technology Institute Co., Ltd. Page 1 of 1 Operational Description The EUT is a low power 125 KHz transceiver using loop coil antenna. The EUT is powered from AC Adapter (output :DC12V). The EUT is Power ON and operate continuously in TRANSMITTING and READING mode The EUT will only be marketed to corporations. It works in conjunction with security systems in offices and factories.

RTCK nSRSTTDOTCKTMSnTRSTTDI EX_DOOR_MONITOREX_DOOR_OPENCONTACT_ACOMMONCONTACT_B EXT_BEXT_A WIEGAND_1WIEGAND_0 +5VA +3V +5VA TitleSize Document Number Rev Date: Sheet of <Doc> 0.5 OutConnector B 213 0 4 18, 26 POWERBOTTOM SIDE MAIN BD <-> MULTI-ICE DOOR CTRL BOTTOM SIDE A B (TRX+)(TRX-) Silk Screen In Case of WIEGAND, userMUST PULL UP with 5V RS-485 WIEGAND OUTPUT BOTTOM SIDE BOTTOM SIDE C51C0.1UF/16V J1MOLEX 3P 2.5MM (5267-3A) 123 C40NC C41NC C52C0.1UF/16V C1 E22UF/50V + R310K D131N4148 BL2 MPZ2012S221A BL20MPZ2012S221A D141N4148 J16 12 BL30 MPZ2012S221A BL1 MPZ2012S221A C2 E22UF/50V J17 1 2 BL16 MPZ2012S221A R14.7K C50T47UF/16 J5MOLEX 4P 2.5MM (5267-4A) 1234 J2 MOLEX 6P 2.5MM (5267-6A) 123456 J3MOLEX 2P (90136-1202-ST) 12 R24.7K D1 SS210 J4 MOLEX 9P 1.25MM (53047-0910) 123456789 RA1 10KA D2 SS210 SD7 VADJ_VAR VADJ_GND SD0SD1SD2 VADJ_GND SD3SD4SD6SD5 SD[7..0] VADJ_VAR SDASYSCLKHSYNC SENSOR_LEDON VSYNCSDATA7SDATA6SDATA5SDATA4SDATA3SDATA2SDATA1SDATA0SCLPIXCLK SYSCLKVSYNCHSYNCSDATA0SDATA1SDATA2SDATA3SDATA4SDATA5SDATA6 SDATA7SDASCL SENSOR_LEDON PIXCLK LCD_E1LCD_E2LCD_RWLCD_DI SD0SD1 SD2SD3SD4SD5SD6SD7 VADJ_VAR LCD_RESET LCD_RESET LCD_E1 LCD_E2LCD_RWLCD_DI SENSOR_LEDONSDATA0SDATA1SDATA2SDASDATA3SDATA4SDATA5SDATA6SDATA7SYSCLKVSYNCHSYNCPIXCLKSCLCPU_RESERVED_1CPU_RESERVED_2 +5V -5VA +5VA AVCC_BL +3VA +3V +5VA AVCC_BL +3V SD[7..0] TitleSize Document Number Rev Date: Sheet of < EB4-0037A > 0. 5 OPP LCD CONN B 313 , 6 13, 2006 MAIN BD <-> LCD TOP SIDE MAIN BD <-> SENSOR TOP SIDE TP7 1 R54.7K J6 MOLEX 20P 0.5MM (52559-2072) 1234567891011121314151617181920 TP18 1 TP11 1 R44.7K TP31 1 TP13 1 TP34 1 TP29 1 TP28 1 TP20 1 TP22 1 TP12 1 TP5 1 TP15 1 R61K BL31 MPZ2012S221A TP19 1 TP26 1 RA3 1KA 1 2 3 45 6 7 8 C42NC TP30 1 TP3 1 TP33 1 TP17 1 TP21 1 TP9 1 TP2 1 J7 MOLEX 18P 1MM (52207-1885) (Top Contact) 123456789 101112131415161718 TP32 1 TP24 1 TP16 1 TP23 1 TP8 1 RA2 1KA 1 2 3 45 6 7 8 TP35 1 TP6 1 TP1 1 BL32 MPZ2012S221A TP10 1 R710K 13 2 TP4 1 TP27 1 TP25 1 C3SFI0603 TP14 1 CPU_AUTO_ON LED_ON_NETLED_ON_AUTHLED_ON_FAILKEYPAD_RST KEYIN0KEYIN1KEYIN2KEYIN3 KEYOUT5KEYOUT0KEYOUT1KEYOUT2KEYOUT3KEYOUT4 SPK+SPK- CPU_AUTO_ON RF_DATA1RF_DATA0 KEYIN3KEYIN1KEYIN0KEYIN2 LED_ON_NETLED_ON_AUTHLED_ON_FAIL KEYPAD_RST SPK+SPK- KEYOUT3KEYOUT1KEYOUT0KEYOUT4KEYOUT2KEYOUT5 +5VA +3V +3V +5VA +3VA +3VA +3VA +3V +3VA +3VA TitleSize Document Number Rev Date: Sheet of < EB4-0037A > 0. 5 InConnector 2 B 413 , 4 18, 2006 MAIN BD <-> AUTO-ON BD 1) Main BD <-> RF BD2) WIEGAND INPUT C5 C9 TP57 1 J9 MOLEX 4P 2.5MM (5267-4A) 1234 TP53 1 J10 MOLEX 3P 1.25MM (53398-0390) 123 TP47 1 TP42 1 C13 BC2C0.1UF/16V TP52 1 TP55 1 TP37 1 D15 1N4148 TP38 1 TP39 1 J8 MOLEX 20P 0.5MM (52559-2072) 1234567891011121314151617181920 TP48 1 C14T4.7UF/20V C8 C4 TP58 1 TP41 1 TP44 1 TP56 1 C10 C7 TP43 1 C15C0.1UF/16V TP54 1 BC1C0.1UF/16V TP40 1 TP45 1 C6 D3 1N4148 C11 TP50 1 RA4 10KA TP49 1 TP36 1 C12 C16SFI0603 R82K D161N4148 TP51 1 TP46 1 LCD_BL_ON PWR_EN +5VA AVCC_BL +5VA +1VA +3VA +3VA +2VA +5VA +5VA -5VA TitleSize Document Number Rev Date: Sheet of < EB4-0037A > 0. 5 POWER B 513 , 2 03, 2006 (3216) TAB = OUT high enable (7343) (3216) (7343) 5V -> 3.3V 5V -> -5V 5V On/Off 5V ->2.5V 3.3V -> 1V U4 SC4211 NC 1 EN 2 VIN 3 NC 4 GND 8 FB 7 VO 6 NC 5 TP59 1 U2 XC6210B252MR CE 3 NC 4 VOUT 5 VIN 1 VSS 2 C18T10UF/16 + TP64 1 TP61 1 U1 NCP1086ST IN 3 GND 1 OUT 2 TP63 1 C19 T47UF/16 + TP62 1 R121.5K U3 FDC6323L R1/C1 6 R2 1 VOUT/C1 3 VIN/R1 4 ON/OFF 5 VOUT/C1 2 U5 NCP1729 C- 3 GND 4 C+ 6 VOUT 1 VIN 2 SHDN 5 C31T4.7UF/16 + C28C1UF/10 R131.5k C17C1UF/10 C24T10UF/16 R9 20K C25C1UF/10 C29T4.7UF/16 + C27T47UF/16 + TP60 1 C30T4.7UF/16 + C20 C1UF/10 C22C1UF/10 C23C1UF/10 C26T10UF/16 + R114.7K C21 C1UF/10 R104.7K VER1VER2VER3 VER1VER2VER3 A1A2A3A5A4A7A6A8A10 A13 A9A11 A14A15A12 BSEL2BSEL1 A16A19A21A17A18A22A20 A25 A[22..1] BSEL0 BSEL0 D[31..0] D0 BSEL2 BSEL1 D1D2D3D4D6D7D5D8D11D10D9D12D14D15D13D17D18D19D16D23D22D20D21D24D27D25D26D28D31D30D29 A17 A[11..2] A3A4A2A5A6A7A9A10A8A11 D0D1D2D3D6D4D7D5D8 D[15..0] D10D9D11D15D13D12D14 P0P1P2P3P4 SENSOR_LEDONnCS0nCS1nCS3nSDCS_0CPU_AUTO_ONSDCKE_1SDCLK_1nSDRASnOEnSDCASnWE nOPP_IRQnETN_IRQ TDO RTC_DATA RTC_SCLKRTC_nRST SDA nRESET_OUT DQM0DQM2DQM1DQM3LED_ON_NETLED_ON_AUTHLED_ON_FAIL nTRST HW_INIT TCKTMSTDI CLK_SENSOR F_PROGRAMF_INITF_DONEF_CCLKF_DIN KEYIN3KEYIN1KEYIN2KEYIN0 PWR_ENFLASH_WE P5P6 nCPU_RESET P7SBT SCL A17 CPU_DOOR_OPENCPU_DOOR_MONITORCPU_RELAY LCD_BL_ONFPGA_RESET KEYOUT0KEYOUT1KEYOUT2KEYOUT3KEYOUT4KEYOUT5 A25 CPU_TXD_485 CPU_RXD_485 n485_RXD_EN485_TXD_ENCPU_WIE1CPU_WIE0CPU_CHECK_NET_BDCPU_CHECK_RELAY_BD CPU_RESERVED_1CPU_RESERVED_2 VOICE_RST nMR WDI +3V +1V +3V +1V +3V +3V +3V A[22..1] D[31..0] A[11..2] D[15..0] TitleSize Document Number Rev Date: Sheet of < EB4-0037A > 0.5 CPU C 613 , 6 13, 2006 Bypass Capacitors for Core Bypass Capacitors for VCCQ BC13C0.1UF/16V R19NC R231M R694.7K U6 PXA255 G1H2H1H6J6J5J3 PXA250 K2J1K1K5K6L1L3M1M3N3P1R1P2R3T4R5P5T5P4D11A11C12B12C15B15E11F9C9B9A9D13B14B10D9B13A16E9B16A10D10E10A12D14A15E13D12B11H12M16R15T14R16N16P14F8E12M13A14A13F10P13P16T15L10K16H15G11L15K11J12L13K15K14H13J11G12H11H14H16L16L12J13F14G15B6B5F7A7F12B4 J16 K13K12L11A8B8D8E8B3C3A2A3A4D5A5C5A6E5D6E6B7C7D7E7F13G13G16N14N12M12N15C1D3G4G5F3E1D1F5D2E3E4F2G3G6F1L7B2B1M8T13R13T9P9T8N8P12R11P10L8P7R7P6T3N1M2L4K3J4H5H3M10N10P11T11T10M9M7M6T7N6L5M5N4T6R9T12P8 C8 C4 C11 C14 D16 E15 E16 F6 F15 F16 G8 G10 H7 P15 K9 M15 E2 C2 L2 J10 N2 R4 G2 R2 J14 L14 J2 K7 T1 H8 R8 J9 R6 R12 H9 R10 C16 R14 J8 M11 F4 N13 E14 T16 C13 N11 N7 N5 G7 D4 K10 T2 F11 K8 J7 A1 H10 C10 M14 L9 G9 J15 N9 D15 K4 L6 P3 G14 M4 H4 C6 ADDRESS VCC DATA MEMORY CONTROLBOOTLCD PORTPWR MNG VSS GPIO RESETCLOCKJTAGPCMCIA PWM FF ChMMC ChBT ChSSP ChAC97 ChIrDA ChUSB Ch I2C L_FCLK/GPIO_74 72 L_LCLK/GPIO_75 56 L_PCLK/GPIO_76 24 L_BIAS/GPIO_77 8 MD_0 196 MD_1 181 MD_2 165 MD_3 246 MD_4 198 MD_5 247 MD_6 182 MD_7 183 MD_8 185 MD_9 250 MD_10 233 MD_11 251 MD_12 219 MD_13 202 MD_14 252 MD_15 186 MD_16 115 MD_17 117 MD_18 132 MD_19 147 MD_20 164 MD_21 178 MD_22 193 MD_23 243 MD_24 214 MD_25 2…

Text truncated - open the document above for the full version.

KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 1 of 24 Test Report Test Report No.: KTI07EF12003 Registration No.: 99058 Applicant: NITGEN CO., LTD. Applicant Address: Sam-Oh Bldg, 3 rd Floor, 905-4 HoGye-dong, DongAn-gu, AnYang-city, Gyunggi-do, Korea Product: ACCESS CONTROLLER FCC ID: PEBNAC-2500LR Model No. NAC-2500LR Receipt No.: 07-1126 Date of receipt:November 29, 2007 Date of Issue: December 05, 2007 Testing location Korea Technology Institute Co., Ltd. 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea Test Standards: FCC/ANSI. C63.4: 2003 Rule Parts: FCC Part 15, Class B Equipment Class: Digital device Test Result: The above-mentioned product has been tested with compliance. Tested by: T.W. Lee / Engineer Approved by: G. C. Min /President Signature Date Signature Date Other Aspects: Abbreviations: * OK, Pass=passed * Fail=failed * N/A=not applicable ☞ - This test report is not permitted to copy partly without our permission. - This test result is dependent on only equipment to be used. - This test result is based on a single evaluation of one sample of the above mentioned. - This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S Government. - We certify this test report has been based on the measurement standards that is traceable to the national or international standards. KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 2 of 24 ≫≫ Contents ≪≪ 1. 2. 3. 4. 5. 6. Contents List of Tables List of Figures List of Photographs General Test Site 2.1 Location 2.2 List of Test and Measurement Instruments 2.3 Test Data 2.4 Test Environment Description of the tested samples 3.1 Rating and Physical characteristics 3.2 Submitted documents Measurement conditions 4.1 Modes of operation 4.2 List of peripherals 4.3 Uncertainty 4.4 Test Setup Emission Test 5.1 Conducted Emissions 5.2 Radiated Emissions Photographs of the Test Set-up 2 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 6 7 8 8 12 14 ≫ List of Tables Table 1 List of test and measurement equipment Table 2 Test Data. Conducted Emissions Table 3 Test Data. Radiated Emissions Table 5 Measured values of the Field Strength (below 30MHz) ≫ List of Figures Figure 1 Spectral Diagram, LINE-PE Figure 2 Spectral Diagram, Neutral-PE ≫ List of Photographs Photograph 1 Setup for Radiated Emissions Photograph 2 Setup for Conducted Emissions 4 11 13 18 9 10 14 15 KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 3 of 24 ≫≫ Contents ≪≪ 6. TEST AND MEASUREMENTS 6.1 ANTENNA REQUIRMENT 6.1.1 REGULATION 6.1.2 RESULTS 6.2 TEST AND MEASUREMENTS 6.2.1 REGULATION 6.2.2 MEASUREMENT PROCEDURE 6.2.3 CALCULATION OF THE FIENLD STRENGTH LIMITS 6.2.4 TEST RESULTS 15 15 15 15 16 16 16 17 17 KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 4 of 24 1. General This equipment has been shown to be capable of compliance with the applicable technical standards and was tested in accordance with the measurement procedures as indicated in this report. We attest to the accuracy of data. Korea Technology Institute Co., Ltd. performed all measurements reported herein. And were made under Chief Engineer’s supervisor. We assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. 2. Test Site Korea Technology Institute Co., Ltd. Location 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea The Test Site is in compliance with ANSI C63.4/2003 for measurement of radio Interference. KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 5 of 24 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment - Conducted Emissions Kind of Equipment Type S/N Calibrated until Field Strength Meter ESIB40 100093 07.2008 LISN KNW407 8-1157-2 01.2008 LISN EM-7823 115019 05.2008 Conducted Cable N/A N/A 11.2008 - Radiated Emissions Kind of Equipment Type S/N Calibrated until Field Strength Meter ESIB40 100093 07.2008 Loop Antenna 6502 3434 06.2008 Biconic Logarithmic Periodic Antenna VULB9163 9163-281 09.2008 Horn Antenna 3115 6443 08.2008 Open Site Cable N/A N/A 11.2008 Antenna Mast DETT-03 N/A N / A Antenna & Turntable controller DETT-04 91X519 N / A Test Date Date of Application: November 29, 2007 Date of Test: December 03, 2007 Test Environment Indoor: 24°C/39%/1000mbar Outdoor: 9.6°C/20%/1000mbar KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 6 of 24 3. Description of the tested samples The EUT is ACCESS CONTROLLER Rating and Physical Characteristics Function Spec. Display Type 128 * 32 Dots LCD Language Default: Korean, English Additional Type A: Japanese, Chinese, Spanish, French, Thai, Indonesian Additional Type B: Polish, Farsi, Malay, Hebrew, Vietnamese(voice only), Portuguese Sensor Model OPP03 LFD Type Optical Resolution 500 DPI Additional Auto on / Latent Image Check Live Finger Detection Authentication Speed 1:1 mode: less than 1 sec / 1:N mode: Application Note Algorithm FRR: less than 0.1% / FAR: less than 0.001% #of registered users Terminal 2000(1 finger prints per user) 1000(2 finger prints per user) Communication TCP/IP 10 base-T Ethernet (optional) RS-485 Max. 115200bps (custom requirement) Additional function Guidelines recorded in voice Downloadable logo / firmware IP length ( 4~15 digits) Authentication results to be displayed in LED Optional Network Board Door Control Board RF Module [125KHz HID(3M 500 ㎶/m, 13.56MHz Mifare(10M 93.5 ㏈㎶/m )] Submitted Documents • User’s Guide • Block Diagram KTI07EF12003 FCC ID:PEBNAC-2500LR Korea Technology Institute Co., Ltd. Page 7 of 24 4. Measurement Conditions Testing Input Voltage: AC 220V Modes of Operation The EUT was in the following operation mode during all testing; 1) EUT operates a finger print job with connection to Note Pc Additional Equipment DEVICE TYPE Manufacturer M/N S/N FCC ID Note PC Samsung SV20 E771…

Text truncated - open the document above for the full version.

KTI07EF12003 FCC ID:- Korea Technology Institute Co., Ltd. Page 1 of 2 6. Photograph of the Test Set-Up Photograph 1 : Setup for radiated Emissions KTI07EF12003 FCC ID:- Korea Technology Institute Co., Ltd. Page 2 of 2 Photograph 2 : Setup for Conducted Emissions