PGAM6000Handheld Wireless Barcode Reader

Model 6000 RF Barcode Reader USER’S MANUAL AMERICAN MICROSYSTEMS, LTD. 2190 Regal Parkway • •• • Euless, TX 76040 (817)571-9015 • •• • (800)648-4452 • •• • Fax: (817)685-6232 www.barcodepower.com 1 FCC NOTICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and the receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. There are no user-serviceable internal parts. Changes or modifications not expressly performed by the manufacturer will void the manufacturer’s warranty and may void the user’s legal authority to operate the equipment. FCC PRODUCT LABEL INFORMATION This device complies with FCC Part 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. TRADEMARK ACKNOWLEDGEMENTS IBM, AT/XT, and PS/2 are registered trademarks of International Business Machines Corporation. MS-DOS, Windows, and Notepad are trademarks of Microsoft Corporation. PSC and Quickscan 6000 (QS6000) are trademarks of PSC Corporation. Metrologic MS-941 Laser is a trademark of Metrologic Instruments, Inc. All other trademarks or registered trademarks of other companies are used only for explanation without intent to infringe. © Copyright American Microsystems, Ltd. 2000. All rights reserved. 2 TABLE OF CONTENTS Introduction 3 Features 4 Setup Instructions 4 Usage Guidelines 5 Setting the Host ID and Portable ID 6 Default Settings 7 Changing the Settings 9 Programming Guide 11 Code 39 13 UPC 14 EAN 15 UPC/EAN Supplements 16 Interleaved 2 of 5 17 Codabar 18 Code 128 19 Code 93 19 MSI/Plessey 20 Code 11 21 Preamble 22 Postamble 23 Barcode Options 24 Barcode Edit 26 Laser/CCD Options 27 Termination Character 28 Scan Beep Length & Tone 28 Portable Acknowledge Beep Length & Tone 29 Diagnostics 29 Portable Shutdown Time 30 Signal Definitions 30 3 INTRODUCTION The Model 6000 RF Barcode Reader (M6000) provides the user with the means of converting an undecoded laser, CCD, or wand into a wireless device. By allowing many types of input devices, this system provides users the ability to customize according their needs and is an affordable alternative to purchasing an integrated RF system. The M6000 has a superior range, up to 150 feet, providing users with an RF link to an IBM compatible PC. The RF host is used as a companion to the M6000, receiving the RF data and converting it into useable IBM compatible PC keyboard data. For an AT or PS/2 PC keyboard interface, the Model 6200 RF Host (M6200) is used. For a USB keyboard interface, the Model 6300 USB RF Host (M6300) is used. The M6000 can be custom configured using the M6000/M6200/M6300 Setup Menu Sheet to allow multiple independent users, as well as, other standard options that allow the equipment to be tailor-fitted for your individual data collection application. The M6000’s simple but rugged construction allows for extended reliable operation. Once configured, simply connect a scanning device, push the ON button, and you are ready to scan. Every valid scan is confirmed with an audible beep. The M6000 automatically turns off power after a few minutes, so batteries are not wasted or accidentally discharged. Reliability, ease of use, and affordability make the M6000 system an excellent choice for wireless barcode data collection. 4 FEATURES • Expandable: Allows ten (10) M6000 RF portables per host, by setting the Portable ID. The total system allows up to eight (8) RF hosts to be used, by setting the Host ID. • Reader automatically recognizes and reads the following barcode types: -Code 39 -Codabar -Extended Code 39 (full ASCII) -Code 128 -Interleaved 2 of 5 -Code 93 -UPC-A, UPC-E -Code 11 -EAN-8, EAN-13 -MSI/Plessey -UPC & EAN supplements (2 and 5 character) • Supports any low cost 5 Volt undecoded laser, CCD, or wand devices. • Convenient momentary ON button turns on the M6000 power. After a user settable idle time (in minutes), the M6000 automatically turns off the power, so there are no accidentally discharged batteries. SETUP INSTRUCTIONS Step 1: Insert the 9V battery into the M6000 battery compartment. Make note of the battery polarity markings in the compartment. If the battery is inserted backwards, the M6000 will not turn on. Step 2: Replace the battery compartment door. Now press the ON button to verify that the M6000 is working. When the ON button is pressed and released you will hear an audible beep. Step 3: Plug the barcode scanning device of your choice (laser, CCD, or wand) into the 9-pin D-shell connector interface. Note that the barcode interface connector has built-in cable locking tabs. 5 USAGE GUIDELINES The Model 6000 RF Barcode Reader communicates to the RF Host using a radio frequency (RF) data link. The radio’s typical range is about 150 feet in an unobstructed line-of-sight environment. Factors that effect the M6000 radio’s performance in any given environment are related to the physics of radio wave (electromagnetic wave) transmission, and incl…

Text truncated - open the document above for the full version.

Andrew Perkins American Microsystems, Ltd. 2190 Regal Parkway Euless, TX 76040 Phone: (817) 571-9015 Fax: (817) 685-6232 Subject: Letter of Confidentiality Request for the M6000 Dear Reviewer, American Microsystems, Ltd. (AMS), requests that the Schematic exhibit of the application for FCC ID: PGAM6000 be withheld from routine availability for public inspection pursuant to Section 0.459 of the Commissions Rules and Freedom of Information Act (FOIA) Exemption 4, 5 U.S.C. 552 (b) (4). These particular exhibits consist of “trade secrets (or) commercial or financial information obtained from a person and privileged or confidential” 5 U.S.C 552 (b) (4), and is therefore entitled to protection from disclosure under the FOIA. The documents in question contain trade secrets: detailed technical descriptions, specifications, and schematics for a product offered for sale. This proprietary information would give AMS’s competitors an unearned competitive advantage. The documents contain “commercial information” within the scope of FOIA exemption 4. This information is the product of AMS’s investment of money, personnel, and other resources. The result of the investment is a fairly earned position in the marketplace. Premature release of the information threatens substantial and unwarranted harm to AMS’s competitive position. For these reasons, AMS has taken pains to keep this technical information confidential and intends to continue doing so. AMS customarily withholds rights to this information, granting access only to those who have a particular approved need for the information. AMS grants the Commission their needed access to these documents, but respectfully asks that the information be kept confidential. The filing fee that is required for this confidentiality request is included in the check that accompanies this application. If there are any questions about this request, please contact me. Thank you. Respectfully submitted, Andrew Perkins

NTS Test Report No. A0579-6000-fcc National Technical Systems, Electromagnetic Compatibility Test ReportPage 12 of 14 1701 E. Plano Parkway Suite 150, Plano, TX 75074; Tel (972) 509-2566; Fax (972) 509-0073 5.1Radiated Emissions 5.1.1Radiated Emissions Test Setup Top View of Equipment Under Test Back of AMERICAN MICROSYSTEMS’ M6000

M6000 External Photo: FCC label location with FCC ID M6000 Internal Photo: Solder side of PCB

M6000 Internal photo: Component side of PCB M6000 External Photo: FCC label location with FCC ID M6000 Internal Photo: Solder side of PCB

7 NTS Test Report No. A0579-6000-fcc rev 1 Page 1 of 15 National 1701 E. Plano Pkwy Suite 150 Technical Plano, TX 75074 Systems Tel: 972-509-2566 Fax: 972-509-0073 Electromagnetic Compatibility (EMC) and Electrical Safety Test Report for Network Telecommunications Equipment For American Microsystems, AMERICAN MICROSYSTEMS’ M6000 FCC PART 15, SUB-PART B, CLASS B and FCC part 15.249 Prepared For:American Microsystems Prepared By:National Technical Systems 1701E. Plano Parkway Suit 150 Plano, TX 75074 Issued:February 19, 2001 This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full.  NTS Test Report No. A0579-6000-fcc rev1 National Technical Systems, Electromagnetic Compatibility Test ReportPage 2 of 15 1701 E. Plano Parkway Suite 150, Plano, TX 75074; Tel (972) 509-2566; Fax (972) 509-0073 Service For:American Microsystems Purchase Order No.:50799 This is to certify that the following report is true and correct to the best of my knowledge. _______________________________________________________________ John Ngo, Bob Stevens EMI Operations ManagerQuality Assurance Manager FCC, CE, Telecommunication  NTS Test Report No. A0579-6000-fcc rev1 National Technical Systems, Electromagnetic Compatibility Test ReportPage 3 of 15 1701 E. Plano Parkway Suite 150, Plano, TX 75074; Tel (972) 509-2566; Fax (972) 509-0073 TABLE OF CONTENTS ELECTROMAGNETIC COMPATIBILITY (EMC) AND ELECTRICAL SAFETY......................................1 TEST REPORT FOR NETWORK TELECOMMUNICATIONS EQUIPMENT.............................................1 1.0GENERAL INFORMATION...................................................................................................................5 1.1PRODUCT DESCRIPTION .......................................................................................................................5 HARDWARE DETAIL:......................................................................................................................................5 1.2INSTRUMENT CALIBRATION................................................................................................................6 1.2.1ACCURACY OF MEASUREMENT......................................................................................................6 1.3AMBIENT TESTS.....................................................................................................................................6 1.4FAILURE REPORTING..........................................................................................................................6 1.5THRESHOLD OF SUSCEPTIBILITY........................................................................................................7 1.6TEST PROGRAM DEVIATION................................................................................................................7 1.7INSPECTION.............................................................................................................................................8 1.8DISPOSITION OF TEST ITEMS............................................................................................................8 1.9TEST FACILITY.....................................................................................................................................8 2.0GENERAL TEST METHODOLOGY.....................................................................................................9 2.1EMISSIONS...............................................................................................................................................9 2.1.1RADIATED EMISSIONS FIELD STRENGTH CALCULATIONS......................................................10 2.2ORDER OF TESTING.............................................................................................................................10 2.3SPECIAL TEST JUSTIFICATION...........................................................................................................10 3.0TEST CONFIGURATION.....................................................................................................................10 3.1SELECTION OF AMERICAN MICROSYSTEMS’ M6000 CONFIGURATION AND MODES OF OPERATION.......................................................................................................................................................10 3.2EQUIPMENT MODIFICATIONS.........................................................................................................10 4.0TEST INSTRUMENTATION................................................................................................................11 5.0EMISSIONS............................................................................................................................................11  NTS Test Report No. A0579-6000-fcc rev1 National Technical Systems, Electromagnetic Compatibility Test ReportPage 4 of 15 1701 E. Plano Parkway Suite 150, Plano, TX 75074; Tel (972) 509-2566; Fax (972) 509-0073 5.1RADIATED EMISSIONS......................................................................................................................12 5.1.1RADIATED EMISSIONS TEST SETUP...........................................................................................12 5.1.2RADIATED MEASUREMENT DATA...........................…

Text truncated - open the document above for the full version.

OATS Site photo: for M6000 testing setup Close-up photo of test setup: M6000 with wand attached.