PIDAS1035LTE Base Station

© Copyright by Airspan Networks Ltd., 2023. All rights reserved worldwide. AirSpeed 1035 B41 Installation Guide Part Number: DUG01081 Revision: B.3 Published: Aug 2023 AirSpeed 1035 B41 Installation Guide DUG01081 Airspan Commercial and Internal Use ii Legal Notices The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Ltd. rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced, transmitted or disclosed to third parties, in whole or in part, without the express, prior, written permission of Airspan Networks Ltd. In addition, any use of this document or the information contained herein for the purposes other than those for which it is disclosed is strictly forbidden. Airspan Networks Ltd. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by Airspan Networks Ltd. is believed in good faith to be accurate and reliable, while every care has been taken in preparing these documents. However, Airspan Networks Ltd. does not make any representations and gives no warranties of whatever nature in respect of these documents, including without limitation, the accuracy or completeness of any information, facts and/or opinions contained therein. No responsibility is assumed by Airspan Networks Ltd. for the use of the documents nor for the rights of third parties which may be effected in any way by the use thereof. The provision of these documents (and the documents themselves) does not constitute professional advice of any kind. Any representation(s) in these documents concerning performance of Airspan Networks Ltd. product(s) are for informational purposes only and are not warranties of future performance, either expressed or implied. Airspan Networks Ltd., its affiliates, directors, employees and agents shall not be held liable for any damages or losses, of any nature whatsoever, arising from any use of and/or reliance on the documents. These documents may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation thereto unless specifically undertaken in Airspan Networks Ltd. sales contract or order confirmation. Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, please notify Airspan Networks Ltd. Product performance figures quoted within this document are indicative and for information purposes only. Acknowledgements © Intel Corporation http://www.intel.com/ © Microsoft Corporation http://www.microsoft.com AirSpeed 1035 B41 Installation Guide DUG01081 Airspan Commercial and Internal Use 1 Table of Contents Document Information ............................................................................. 5 Abstract .................................................................................................................. 5 Revision History ..................................................................................................... 5 Warnings and Cautions ........................................................................... 6 Human Exposure to Radio Frequencies ................................................................ 6 Avertissement et Precautions d’Utilisation .............................................. 6 Exposition des personnes aux fréquences radioélectriques .................................. 6 Radio Interference ................................................................................................. 6 Modifications .......................................................................................................... 6 General .................................................................................................................. 6 Général .................................................................................................................. 6 Important Safety Instructions ............................................................................ 7 Safety ..................................................................................................................... 7 Securite .................................................................................................................. 7 Warning of Hazardous Voltages ............................................................................ 8 Attention aux Voltages Hasardeux ......................................................................... 8 Adherence to European Directive 2014/53/EU ...................................................... 8 Warning Symbols ................................................................................................... 8 Service Information ................................................................................................ 8 UL Information ....................................................................................................... 9 DECLARATION OF CONFORMITY ........................................................ 9 Maximum Output TX Power .................................................................. 11 Product Variants .................................................................................................. 11 Power Consumption ............................................................................................. 12 External Antenna ................................................................................................. 13 About This Document ........................................................................... 14 Purpose ................................................................................................................ 14 Intended …

Text truncated - open the document above for the full version.

Covered list attestation FCC application letter Kiwa RF_755_02 Page 1 of 2 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Certification Application Attestation Statements Airspan Networks Inc. 777 Yamato Road Suite 310 Boca Raton FL 33431 USA Subject: FCC ID: PIDAS1035 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Airspan Networks Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Airspan Networks Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 8/22/2023 City: FL 33431 Name (2) : Oleg Einem Function: Compliances Engineer Telephone number: +1 (201) 317- 4553 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa RF_755_02 Page 2 of 2 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : ---- 02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : ---- 02-2023

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Airspan Networks, Inc. FRN: 0009 320 326 Grantee Code: PID FCC ID: PIDAS1035 Contact person name: Grant Pottash Agent name: Airspan Networks, Inc. Street address: 777 Yamato Rd., Suite 310 ZIP/City/State Boca Raton, FL 33431 Telephone number: +1 561 893-8670 Email address: [email protected] Signature Contact person*: Date: 26-Sep-23 Signature Agent*: Date: 26-Sep-23 Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 2 of 2 RF_754_02 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] Note *Must be signed by both the applicant, and agent on behalf Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 09-02-2023 1 st version RvM 02 1 15-02-2023 Added FRN RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Airspan Networks, Inc. FRN: 0009 320 326 Grantee Code: PID FCC ID: PIDAS1035 Contact person name: Grant Pottash Agent name: Airspan Networks, Inc. Street address: 777 Yamato Rd., Suite 310 ZIP/City/State Boca Raton, FL 33431 Telephone number: +1 561 893-8670 Email address: [email protected] Signature Contact person*: Date: 26-Sep-23 Signature Agent*: Date: 26-Sep-23 Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 2 of 2 RF_754_02 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] Note *Must be signed by both the applicant, and agent on behalf Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 09-02-2023 1 st version RvM 02 1 15-02-2023 Added FRN RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

August 22, 2023 Telefication B.V. Attn: Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Application for certification for an AirSpeed 1035, 2.496 – 2.69GHz (B41), CN, SFP, AC, FCC ID: PIDAS1035 Dear Gentlemen, Please find attached our application for certification for an AirSpeed 1035, 2.496 – 2.69GHz (B41), CN, SFP, AC, FCC ID: PIDAS1035, prepared in accordance with FCC Rules, parts 2 and 27. The product testing and this application for certification were performed by Hermon Laboratories, which is recognized and accredited by FCC, Test Firm Registration Number is 927748, Designation Number is IL1001. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. We hope this application satisfies your requirements. Please send an invoice to Hermon Labs. Oleg Einem Compliances Engineer Airspan Networks Inc.

Company name: Airspan Networks Inc. Address: 777 Yamato Road Suite 310 Boca Raton FL 33431 USA AirSpeed 1035 2.496-2.69 GHz (B41) statement 1) DC voltages/currents supplied to elements of the final radio frequency amplifying device for normal operation over the power range: 30 V/ 0.6 A. Name of authorized person: Oleg Einem Position: Compliances Engineer Date: August 23, 2023 Airspan Networks Inc. Tel: +1 561 893-8670; Fax: +1 561 893-8671, www.airspan.com

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (On manufacturer’s company letter heading) Declaration of Authorization We Name: Airspan Networks Inc. Address: 777 Yamato Rd, Suite 310 City: Boca Raton, Florida, 33431 Country: USA Declare that: Name Representative of agent: (1) Agent Company name: Qualitech Address: 30 Hasibim St, City: Petah Tikva 4959388 Country Israel is authorized to apply for Certification of the following product(s): Product description: LTE Base Station Type designation: AirSpeed 1035, 2.496 – 2.69GHz (B41), CN, SFP, AC Trademark: Airspan Validity/ expiry date August 22, 2024 on our behalf. Date: August 22, 2023 City: Boca Raton Name: Oleg Einem Function: Compliances Engineer Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

08.07.202 3 FCC letter of Authorization To whom it may concern, Please be notified that I, Grant Pottash, have designated Oleg Einem in Airspan Networks, Inc. as the person responsible for all FCC projects and to sign the form 731 and other documentation. Any and all acts carried out by Oleg Einem in Airspan Networks, Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. Sincerely, Grant Pottash 8 August, 2023

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Airspan Networks Inc. Address: 777 Yamato Rd, Suite 310 City: Boca Raton, Florida, 33431 Country: USA To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: PIDAS1035 Reference number: 51025 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: in order to avoid exposed of the technology to the competitors Date: August 22, 2023 Name and signature of applicant: Mr. Oleg Einem Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Airspan Networks Inc. FCC ID: PIDAS1035 Page 1 of 5 EXTERNAL PHOTOGRAPHS This document contains 5 photographs Airspan Networks Inc. FCC ID: PIDAS1035 Page 2 of 5 Photograph No.1 Front view and one of the sides Airspan Networks Inc. FCC ID: PIDAS1035 Page 3 of 5 Photograph No.2 Rear view one of the sides Airspan Networks Inc. FCC ID: PIDAS1035 Page 4 of 5 Photograph No.3 Sides view Airspan Networks Inc. FCC ID: PIDAS1035 Page 5 of 5 Photograph No.4 Antenna connector

Airspan Networks Inc. FCC ID: PIDAS1035 Page 1 of 1 LABEL The label is affixed on the side panel of the base radio unit as shown below. The label material is PVC with a permanent adhesive. label with FCC ID:PIDAS1035 location

Airspan Networks Inc. FCC ID: PIDAS1035 Page 1 of 3 INTERNAL PHOTOGRAPHS This document contains 3 photographs Airspan Networks Inc. FCC ID: PIDAS1035 Page 2 of 3 Photograph No.1 Internal view Airspan Networks Inc. FCC ID: PIDAS1035 Page 3 of 3 Photograph No.2 RF Open Cover

Airspan Networks Inc. FCC ID: PIDAS1035 Page 1 of 1 Environmental evaluation and exposure limit according to FCC CFR 47part 1, §1.1307, §1.1310 The transceiver is classified as fixed, the calculation was done to check a safe distance. Limit for power density for general population/uncontrolled exposure is 1 mW/cm 2 for 1500 -100000 MHz frequency range. The power density P (mW/cm 2 ) = P T / 4 r 2 , where P T is the transmitted power, which is equal to the peak transmitter output power plus maximum antenna gain. The maximum equivalent isotropically radiated power EIRP is P T = 35.36 dBm +18 dBi = 53.36 dBm = 216770 mW, where 35.36 dBm is the EUT maximum output power (per port), 18 dBi – antenna gain. The minimum safe distance “r”, where RF exposure does not exceed FCC permissible limit, is r = sqrt { PT / (Px4)} = sqrt {216770 / 12.56} = 131.37 ≈ 132 cm. A warning about a safe distance is contained in the user manual.

Hermon Laboratories Ltd. 66 HaTachana str., P.O. Box 23, Binyamina 3055001, Israel Tel. +972 4628 8001 Fax. +972 4628 8277 E-mail: [email protected] Page 1 of 132 Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC 47CFR part 27 FOR: Airspan Networks Inc. LTE Base Station Model: AirSpeed 1035, 2.496 – 2.69GHz (B41), CN, SFP, AC FCC ID: PIDAS1035 This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Page 2 of 132 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Ports and lines .............................................................................................................................................................. 5 6.3 Support and test equipment .......................................................................................................................................... 5 6.4 Test configuration .......................................................................................................................................................... 6 6.5 Changes made in the EUT ............................................................................................................................................ 6 6.6 Transmitter characteristics ............................................................................................................................................ 7 7 Transmitter tests according to 47CFR part 27 ............................................................................................................... 8 7.1 Occupied bandwidth test ............................................................................................................................................... 8 7.2 Maximum EIRP and maximum power spectral density ............................................................................................... 16 7.3 Band edge emissions at RF connector test ................................................................................................................. 47 7.4 Spurious emissions at RF antenna connector test ...................................................................................................... 56 7.5 Radiated spurious emission measurements .............................................................................................................. 106 7.6 Frequency stability test .............................................................................................................................................. 116 8 APPENDIX A Test equipment and ancillaries used for tests ..................................................................................... 118 9 APPENDIX B Test equipment correction factors ....................................................................................................... 120 10 APPENDIX C Measurement uncertainties ................................................................................................................ 123 11 APPENDIX D Test facility description ....................................................................................................................... 124 12 APPENDIX E Specification references...................................................................................................................... 124 13 APPENDIX F Abbreviations and acronyms ............................................................................................................... 125 14 APPENDIX G Test equipment correction factors ...................................................................................................... 126 Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Page 3 of 132 1 Applicant information Client name: Airspan Networks Inc. Address: 777 Yamato, Road Suite 310 Boca Raton, FL 33431, USA Telephone: +972 (3) 3030020 Fax: +972 (3) 9777400 E-mail: [email protected] Contact name: Mr. Oleg Einem 2 Equipment under test attributes Product name: LTE Base Station Product type: Transceiver Model(s): AirSpeed 1035, 2.496 – 2.69GHz (B41), CN, SFP, AC Serial number: F3D24801FF8C Hardware version: 03 Software release: SR19.0 Receipt date 21-May-23 3 Manufacturer information Manufacturer name: Airspan Networks Inc. Address: 777 Yamato, Road Suite 310 Boca Raton, FL 33431, USA Telephone: +972 (3) 3030020 Fax: +972 (3) 9777400 E-Mail: [email protected] Contact name: Mr. Ol…

Text truncated - open the document above for the full version.

Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 39 of 132 Plot 7.2.17 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 2 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 40 of 132 Plot 7.2.18 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 1 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 41 of 132 Plot 7.2.19 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 3 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 42 of 132 Plot 7.2.20 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 3 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 43 of 132 Plot 7.2.21 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 3 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 44 of 132 Plot 7.2.22 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 4 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 45 of 132 Plot 7.2.23 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 4 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.50, Peak output power Test procedure: 47 CFR, Section 2.1046; TIA/EIA-603-E, Section 2.2.1 Test mode: Compliance Verdict: PASS Date(s): 06-Aug-23 Temperature: 21 ºC Relative Humidity: 54 % Air Pressure: 1012 hPa Power: 110 VAC, 60 Hz Remarks: Page 46 of 132 Plot 7.2.24 Peak output power test results frequency, at low, mid, high frequency CHANNEL BANDWIDTH: 20 MHz NUMBER OF ANTENNA: 4 MODULATION: QPSK MODULATION: 16 QAM MODULATION: 64 QAM MODULATION: 256 QAM Report ID: AIRRAD_FCC.51025.docx Date of Issue: 21-Aug-23 Test specification: Section 27.53, Band edge emissions Test…

Text truncated - open the document above for the full version.