PLJTR310Remote Control Transmitter

ON/OFF LEARN UPM REMOTE CONTROL RECEIVER TR310 remote control transmitter OWNERS MANUAL Congratulations on your purchase of a UPM compact keychain remote control transmitter. This unit is specifically designed to work with UPM brand receivers. Please take the time to read and understand this manual so you can begin to enjoy the convenience this product can offer. FEATURES !433 MHz RF technology !Intelligent code learning !Control up to 2 remote receivers !Ultra compact keychain design !Transmission range of up to 40 meters in open area LEARN FUNCTION TROUBLESHOOTING Transmitter stops turning receiver on and off. Use the LEARN function to reprogram the receiver or Check the battery problemsolution TECHNICAL SPECIFICATIONS Battery Type:2 x 1.5V button cell System Source:4,096 code combinations Transmission Frequency: 433 MHz Transmission Range: up to 40 meters in open area 2 3 Repeat and for an additional receiver (available at your local retailer) using other channel Press LEARN on receiver while simultaneously pressing the desired channel button on the transmitter TR310 Transmitter 1 1 Plug receiver into wall socket 4 If LEARN completed successfully, the LED on the receiver should light up when ON is pressed 1 Turn each receiver On/Off individually by using the channel On/Off keys on the transmitter ON/OFF FUNCTION 3 4 2 2 The learn function must be performed to allow the receivers in your system to recognize the transmitter. More than 4,000 code combinations eliminate the possibility of interference by other transmitters. Note that a generic model of receiver is used for illustration here. Please refer to the accompanying owners manual for the operations of your specific receiver. * NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment. GETTING STARTED battery installation 1 2 remove the battery cover from the back of the transmitter place two button cell batteries into compartment observing proper polarity then replace cover 3 the green LED will light up with any key press once the battery is installed correctly 1 3 button descriptions LED - signal indicator CHANNEL 1 - ON CHANNEL 1 - OFF CHANNEL 2 - ON CHANNEL 2 - OFF 1 2

CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 19 (21) Photographs of the equipment Photograph no.: 1

CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 20 (21) Photographs of the equipment Photograph no.: 2 CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 21 (21) Photographs of the equipment Photograph no.: 3

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6–10, D-66117 Saarbrücken, Telephone +49 (0) 681 598- 0, Fax +49 (0) 598 9075 Test report No.: 2_3085-01-01/02This test report consists of 27 pagesPage 1 (21) Recognized by the Federal Communications Commission FCC–Identification Number: 90462 TCB ID: DE 001 Accredited by the German Accreditation Council DAR–Registration Number TTI–P–G 166/98 Independent ETSI compliance test house ETSI Accredited Bluetooth™ Test Facility (BQTF) Test report No. : 2_3085-01-01/02 Applicant : Mandolyn Int. Ltd. Type : TR310 FCC–ID No : PLJTR310 BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 2 (21) Table of contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test specifications 2 Technical test 2.1 Summary of test results 2.2 Test report CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 3 (21) 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Test laboratory manager: 2002-12-04RSC - 8411Berg M. DateSectionNameSignature Technical responsibility for area of testing: 2002-12-04RSC - 8412Hausknecht D. DateSectionNameSignature CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 4 (21) 1.2 Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telephone: + 49 681 598 - 0 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom-ict.de Accredited testing laboratory Accredited by: Regulierungsbehörde für Telekommunikation und Post (RegTP) Listed by: Federal Communications Commission (FCC) AuthorityIdentification/Registration No. RegTPTTI-P-G 166/98-30 FCC90462 1.3Details of applicant Name :W.H. Mandolyn International Ltd. Street :Unit 1003-8 Landmark North 39 Lung Sum Avenue; Sheung Shui City :N.T. Hong Kong Country :N.T. Hong Kong Telephone:+(852) 2670 9733 Telex :+(852) 2673 0337 E-mail :[email protected] Contact person: Name : Shirley Chan Telephone : +(852) 2670 9733 Telex : +(852) 2673 0337 E-mail : [email protected] 1.4Application details Date of receipt of test item : 2002-11-14 Date of test: 2002-12-03 Person(s) who have been : -.- present during the test CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 5 (21) 1.5Test item Type of equipment : Data transmitter (Temperature and Humidity ) Type designation:Model TR310 Manufacturer:Same as applicant Street: City: Country: Serial number:- / - Additional information : Frequency:433.92 MHz Type of modulation:10K0A1D Channel spacing:>25 kHz Number of channels :1 Antenna:Integral antenna Power supply:2 x 1,5V DC Batteries Temperature range :-20°C - +55°C FCC ID :PLJTR310 Max. ERP: Peak: 80.3 dBμV/m ; Average: 73.6 dBμV/m at 3m distance 1.6Test specifications: FCC Part 15 §15.209 FCC Part 15 §15.231 CANADA RSS-210 CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 6 (21) 2 Technical test 2.1 Summary of test results The radiated measurements were performed vertical and horizontal over the whole frequency range. We start at 1 m high with vertical receiving antenna and rotate the dish continuously. During rotation we use the antenna lift system to vary the high from 1 to 4 m. So we find maximum radiation output. At this points we do manual re-measurements. After this we do the same measurements in horizontal position of the receiving antenna. This (horizontal and vertical) is made for all the three planes of the test sample. We use the maximum received results. The detector function and selection of bandwidth are according ANSI C63.2-1996 item 8.2.1 and ANSI C63.4-1992 Item 4.2. Antennas are conform with ANSI C63.2-1996 item 15. 150 kHz - 30 MHz: Quasi Peak measurement, 9kHz Bandwidth, passive loop antenna. 30 MHz - 200 MHz: Quasi Peak measurement, 120KHz Bandwidth, biconical antenna 200MHz - 1GHz: Quasi Peak measurement, 120KHz Bandwidth, log periodic antenna 1GHz: Average, RBW 1MHz, VBW 10 MHz, wave-guide horn All measurement settings are according to FCC 15.35, 15.205, 15.209,15.231. The product fulfills also the requirements for CANADA RSS-210 No deviations from the technical specification(s) were ascertained in the course of the tests performed. CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 7 (21) 2.2Test report TEST REPORT Test report no. : 2-3085-01-01/02 CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 8 (21) TEST REPORT REFERENCE LIST OF MEASUREMENTS ParagraphPARAMETER TO BE MEASUREDPAGE TRANSMITTER PARAMETERS § 15.231 (e)Timing of the transmitter 9 § 15.231 (e)Emission limitations11 § 15.231 (c)Occupied bandwidth15 Test equipment listing19 Photographs of the equipment21 CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 9 (21) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED :65 (for reference numbers see test equipment listing) Timing of the transmitterSUBCLAUSE § 15.231 (a) (1) Ref Lvl -20 dBm Ref Lvl -20 dBm RBW 1 MHz VBW 1 MHz RF Att 10 dB A Unit dBmSWT 10 s Center 433.7687375 MHz1s/ 1VIEW1AP -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 1 1 2 Marker 1 [T1] -27.22 dBm 2.725451 s 1 [T1] -27.22 dBm 2.725451 s 1 [T1] -0.35 dB 2.344689 s 2 [T1] 5.13 dB 2.825651 s Date: 19.NOV.2002 12:59:13 Start :0 s Marker 1↓ : Start transmi…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report No.: 2_3085-01-01/02Date: 2002-12-03Page 18 (21) Test site