PODDM-UVF10Two Way Radio

DPMR Digital Transceiver Trand name:TYT Model name:DM-UVF10 Frequency:136-174MHz,400-480MHz FCC ID:PODDM-UVF10 SAFETYTRAININGINFORMATION Your radio generators RF electromagnetic energy during transmit mode.This radio is designed for and classified as“Occupational Use Only”,meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the“General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for“Occupational Use Only”.Inaddition, your radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: � to Radio Frequency Electromagnetic Fields. � American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. � American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields– RF and Microwave. � The following accessories are authorized for use with this product. Use of accessories other than those (listed in the instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure. To ensure you’re your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines T he information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure Attention: This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages TYT ELECTRONICS CO., LTD TYT ELECTRONICS CO., LTD TYT ELECTRONICS CO., LTD

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b, Fujian China Tel: 0595-86766928 Fax: 0595-86767928 Sep.28.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Mobile Radio frequency Applicant: TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b,Fujian China Jiamao Lin / Manager TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: PODDM-UVF10 Dear Sir or Madam I attest that the product has one antenna, one battery capacity and one body- worn and audio accessories. And that the product could program the frequence on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. Please contact the undersigned if you have any questions or need any further information. Regards TYT ELECTRONICS CO., LTD Signature: Name, Job Title and Dept.: Jiamao Lin / Manager

Sep.28, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: PODDM-UVF10 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, TYT ELECTRONICS CO., LTD Contact person: Jiamao Lin Title: Manager

Sep.28, 2014 Federal Communication Commission Authorization and Evaluation Division Subject: FCC ID: PODDM‐UVF10 Justification Letter for Expanded Frequency Range 136‐174MHz&400‐480MHz Gentlemen; You have asked TYT ELECTRONICS CO., LTD for justification to have the freq range 136‐174MHz&400‐480MHz appears on the face of the FCC Grant of Certification for a FCC Part 15 Certification. This frequency range is regarded as usual & customary by United States Federal Government and its various departments, user organizations and the military to appear on the face of the equipment Grant of Certification. Sincerely, TYT ELECTRONICS CO., LTD Jiamao Lin /Manager

TYT ELECTRONICS CO., LT D Block 39-1, Optoelectronics-information industry b Fujian China Date: Sep.28, 2014 Statement We, TYT ELECTRONICS CO., LTD states that our device, FCC ID: PODDM‐UVF10 , has no space to put the label except the battery compartment of this device. It is visible to the users as they purchase the products and install the battery. Regards Company: TYT ELECTRONICS CO., LTD Contact Person: Jiamao Lin Title: Manager

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT . FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location FCC RF Warning Label FCC ID: PODDM-UVF10

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT INTERNAL VIEW-6 OF EUT INTERNAL VIEW-7 OF EUT

 FCCID APPLI C Produc Brand Model Client Dateo f STAND REPOR A CAUTIO Š‹•”‡’ Žƒ„‘”ƒ–‘ CATIONPUR ctDesignati Name Name  fIssue DARD(S) RTVERSION A––‡•–ƒ– ON: ’‘”–•ŠƒŽŽ ‘”›ƒ†•Šƒ SA ‡’ ǣ RPOSE: ionǣ ǣ ǣ ǣ ǣ ǣ ǣ –‹‘‘ˆG ‘–„‡”‡’”‘ ƒŽŽ‘–„‡“ RTe ‘”–‘Ǥǣ  Ǧ   ”‹‰‹ƒŽ   ‹ ‰    Ǧ ͳ     …–Ǥ͵Ͳǡʹ Ͳ  –†Ǥ Ͷ͹ Țʹ Ȁ  ͳǤͲ GŽ‘„ƒŽC ‘†—…‡†‡š… —‘–‡†‘—–‘ est  ͲͳͲ͵ͻ  ͳͲ “—‹’‡– ‰‹–ƒŽ”ƒ•…‡ ͳͲ   ͲͳͶ ͳͷʹ ͅǣʹͲͲ͵ ʹǤͳͲͻ͵  ͻͷǤͳ C‘’Ž‹ƒ …‡’–‹ˆ—ŽŽ™ ‘ˆ…‘–‡š–Ǥ Rep ͻͳͶͲ͹ͲͳǦ ‡‹˜‡” ǤǡǤ ƒ…‡ȋŠ ™‹–Š‘—––Š‡ port Ǧͳ Ͳͳ Š‡œŠ‡ ‡™”‹––‡’ t Ȍ‘Ǥǡ ‡”‹••‹‘ Page 1 –†Ǥ ‘ˆ–Š‡–‡•– of 92 Report No.:AGC01039140701-1FH01 Page 2 of 92 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 30,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturerN nufacturerA duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes TYT E Block Chin a TYT E Block Chin a DPMR TYT DM-U N/A DC7.4 IEEE 47CF IEEE / Sep.2 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep ELECTRON 39-1, Optoe a ELECTRON 39-1, Optoe a R Digital Tra VF10 4 V by batte Std. 1528:2 R § 2.1093 /ANSI C95.1 24,2014; Oc tation of Glo uilding 2, No t, Bao'an Dis RT-US-PTT/ d By ed By zed By portC ICS CO., LT electronics-I ICS CO., LT electronics-I ansceiver ry 003 1 ct. 30,2014 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2014- Eric Zh Angela Solger Z Certific TD. nformation TD. nformation ance (Shenz haxi Sanwei zhen, China -04-01) hou a Li hang Report N cation Industry Bas Industry Bas zhen)Co., Ltd Technical In  Oct. 30,201 Oct. 30,201 Oct. 30,201 No.:AGC010 n se, Nan’an, se, Nan’an, d. ndustrial Pa 4 4 4 39140701-1 Page 3 Quanzhou, Quanzhou, rk, Gushu, X FH01 of 92 Fujian Fujian Xixiang Report No.:AGC01039140701-1FH01 Page 4 of 92 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. COMOSAR System Description .......................................................................................................... 10 3.4. COMOSAR E-Field Probe ................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Video Positioning System .................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. SAM Twin Phantom ............................................................................................................................. 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST ............................................................................................................................. 23 9. MEASUREMENT UNCERTAINTY .............................................................…

Text truncated - open the document above for the full version.

Report No.:AGC01039140701-1FH01 Page 73 of 92 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC01039140701-1FH01 Page 74 of 92 Report No.:AGC01039140701-1FH01 Page 75 of 92 Report No.:AGC01039140701-1FH01 Page 76 of 92 Report No.:AGC01039140701-1FH01 Page 77 of 92 Report No.:AGC01039140701-1FH01 Page 78 of 92 Report No.:AGC01039140701-1FH01 Page 79 of 92 Report No.:AGC01039140701-1FH01 Page 80 of 92 Report No.:AGC01039140701-1FH01 Page 81 of 92 Report No.:AGC01039140701-1FH01 Page 82 of 92 Report No.:AGC01039140701-1FH01 Page 83 of 92 APPENDIX E. DIPOLE CALIBRATION DATA Report No.:AGC01039140701-1FH01 Page 84 of 92 Report No.:AGC01039140701-1FH01 Page 85 of 92 Report No.:AGC01039140701-1FH01 Page 86 of 92 Report No.:AGC01039140701-1FH01 Page 87 of 92 Report No.:AGC01039140701-1FH01 Page 88 of 92 Report No.:AGC01039140701-1FH01 Page 89 of 92 Report No.:AGC01039140701-1FH01 Page 90 of 92 Report No.:AGC01039140701-1FH01 Page 91 of 92 Report No.:AGC01039140701-1FH01 Page 92 of 92

FCC ID APPLIC Produc Brand Model Client Date of STAND REPOR A CAUTIO This rep laborato CATION PUR ct Designati Name Name f Issue DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Rep : RPOSE : ion : : : : : : : tion of G ot be repro all not be q R Te ort No.: A PODDM‐ U Original E DPMR Di g TYT DM‐UVF 1 TYT ELE C Oct. 08,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC01039 UVF10 Equipment gital Transce 10 CTRONICS CO 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. Rep 9140701‐ eiver O., LTD. ance(Sh without the port ‐2FH01 henzhen e written p t n) Co., L ermission Page 1 Ltd. of the test of 79 Report No.:AGC01039140701-2FH01 Page 2 of 79 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 08,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes TYT E Block Chin a TYT E Block Chin a DPMR N/A DM-U N/A DC7.4 IEEE 47CF IEEE / Oct. 0 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep ELECTRON 39-1, Optoe a ELECTRON 39-1, Optoe a R Digital Tra UVF10 4V by batter Std. 1528:2 R § 2.1093 /ANSI C95.1 08,2014 tation of Glo uilding 2, No t, Bao'an Dis RT-EC-PPT/ d By ed By zed By port C ICS CO., LT electronics-I ICS CO., LT electronics-I ansceiver ry 003 1 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2013- Bobby W Angela Solger Z Certific TD. nformation TD. nformation ance (Shenz haxi Sanwei zhen, China -03-01) Wang a Li hang Report N cation Industry Bas Industry Bas zhen)Co., Ltd Technical In Oct. 08,201 Oct. 08,201 Oct. 08,201 No.:AGC010 n se, Nan’an, se, Nan’an, d. ndustrial Pa 4 4 4 39140701-2 Page 3 Quanzhou, Quanzhou, rk, Gushu, X FH01 of 79 Fujian Fujian Xixiang Report No.:AGC01039140701-2FH01 Page 4 of 79 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. DASY SAR System Description ........................................................................................................... 10 3.4. DASY5 E-Field Probe .......................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Light Beam Unit ................................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. Measurement Server ........................................................................................................................... 13 3.10. ELI4 Phantom ................................................................................................................................... 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST .......................................................................................................................…

Text truncated - open the document above for the full version.

Report No.:AGC01039140701-2FH01 Page 55 of 79 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC01039140701-2FH01 Page 56 of 79 Report No.:AGC01039140701-2FH01 Page 57 of 79 Report No.:AGC01039140701-2FH01 Page 58 of 79 Report No.:AGC01039140701-2FH01 Page 59 of 79 Report No.:AGC01039140701-2FH01 Page 60 of 79 Report No.:AGC01039140701-2FH01 Page 61 of 79 Report No.:AGC01039140701-2FH01 Page 62 of 79 Report No.:AGC01039140701-2FH01 Page 63 of 79 Report No.:AGC01039140701-2FH01 Page 64 of 79 Report No.:AGC01039140701-2FH01 Page 65 of 79 Report No.:AGC01039140701-2FH01 Page 66 of 79 APPENDIX E. DAE CALIBRATION DATA Report No.:AGC01039140701-2FH01 Page 67 of 79 Report No.:AGC01039140701-2FH01 Page 68 of 79 Report No.:AGC01039140701-2FH01 Page 69 of 79 Report No.:AGC01039140701-2FH01 Page 70 of 79 Report No.:AGC01039140701-2FH01 Page 71 of 79 APPENDIX F LOOP ANTENNA CALIBRATION DATA Report No.:AGC01039140701-2FH01 Page 72 of 79 Report No.:AGC01039140701-2FH01 Page 73 of 79 Report No.:AGC01039140701-2FH01 Page 74 of 79 Report No.:AGC01039140701-2FH01 Page 75 of 79 Report No.:AGC01039140701-2FH01 Page 76 of 79 Report No.:AGC01039140701-2FH01 Page 77 of 79 Report No.:AGC01039140701-2FH01 Page 78 of 79 Report No.:AGC01039140701-2FH01 Page 79 of 79

Page 1 of 87 FCC Part 90 Rules Test Report Report No.: AGC01039140701FE10 FCC ID : PODDM‐UVF10 PRODUCT DESIGNATION : DPMR Digital Transceiver BRAND NAME : TYT, Infinity MODEL NAME : DM‐UVF10, K911‐AD1, DM‐UVF12 CLIENT : TYT ELECTRONICS CO., LTD DATE OF ISSUE : Sep.12, 2014 STANDARD(S) : FCC Part 90 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC01039140701FE10 Page 2 of 87 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep.12, 2014Valid Original Report Report No.: AGC01039140701FE10 Page 3 of 87 VERIFICATION OF COMPLIANCE Applicant: TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Fujian Manufacturer: TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Fujian Product Designation: DPMR Digital Transceiver Brand Name: TYT, Infinity Test Model DM-UVF10 Series Model K911-AD1, DM-UVF12 Difference description All the same except for the model name. Date of Test: Sep.08, 2014 to Sep.10, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Freddie Duan Sep.12, 2014 Checked By Kidd Yang Sep.12, 2014 Authorized By Solger Zhang Sep.12, 2014 Report No.: AGC01039140701FE10 Page 4 of 87 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ............................................................................................................. 6 1.3 TEST METHODOLOGY ................................................................................................................. 7 1.4 TEST FACILITY .............................................................................................................................. 7 1.5 SPECIAL ACCESSORIES .............................................................................................................. 7 1.6 EQUIPMENT MODIFICATIONS ..................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ..................................................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................. 8 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................... 9 3. SUMMARY OF TEST RESULTS ....................................................................................................... 10 4. DESCRIPTION OF TEST MODES ..................................................................................................... 11 5. CONDUCTED LIMITS ........................................................................................................................ 12 5.1 PROVISIONS APPLICABLE ......................................................................................................... 12 5.2 MEASUREMENT PROCEDURE .................................................................................................. 12 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 12 5.4 TEST EQUIPMENT USED ............................................................................................................ 13 5.5 TEST RESULT .............................................................................................................................. 13 6. FREQUENCY TOLERANCE .............................................................................................................. 16 6.1 PROVISIONS APPLICABLE ......................................................................................................... 16 6.2 MEASUREMENT PROCEDURE .................................................................................................. 16 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 17 6.4 TEST EQUIPMENT USED: ........................................................................................................... 17 6.5 TEST RESULT .............................................................................................................................. 18 7. EMISSION BANDWIDTH ................................................................................................................... 17 7.1 PROVISIONS APPLICABLE ......................................................................................................... 30 7.2 MEASUREMENT PROCEDURE .................................................................................................. 30 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 30 7.4 MEASUREMENT EQUIPMENT USED: ........................................................................................ 30 7.5 MEASUREMENT RESULT: ......................................................…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP