PODTH-9800Receiver Portion of Amateur Tranceiver

User Manual Model name:TH-9800 Brand name:TYT FCC ID:PODTH-9800 radio. radio. radio. radio 28-29.7MHz,50-54MHz,144-148MHz,420-450MHz radio radio radio radio Receiver Note:The Radio can be installed in transportation vehicles only. radio 3.8 3.8 radio radio radio Radio radio radio radio radio radio receive Note:Only the manufacturer can programming through the usb prot. 1 R 28-29.7MHz 50-54MHz 144-148MHz 420-450MHz This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b, Fujian China Tel: 0595-86766928 Fax: 0595-86767928 May 20.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Mobile Radio frequency Applicant: TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b,Fujian China Jiamao Lin / Manager TYPE OF QEUIPMENT: Scanning Receiver FCC ID: PODTH-9800 Dear Sir or Madam I attest that the receiver is incapable of tuning, or readily being altered, by the user to operate bands allocated to the scanning receiver in §15.121 Please contact the undersigned if you have any questions or need any further information. Regards TYT ELECTRONICS CO., LTD Signature: Name, Job Title and Dept.: Jiamao Lin / Manager

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b, Fujian China Tel: 0595-86766928 Fax: 0595-86767928 May 20.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Mobile Radio frequency Applicant: TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b,Fujian China Jiamao Lin / Manager TYPE OF QEUIPMENT: Scanning Receiver FCC ID: PODTH-9800 Dear Sir or Madam I attest that the receiver is incapable of tuning, or readily being altered, by the user to operate bands allocated to the scanning receiver in §15.121 Please contact the undersigned if you have any questions or need any further information. Regards TYT ELECTRONICS CO., LTD Signature: Name, Job Title and Dept.: Jiamao Lin / Manager

May 20, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: PODTH-9800 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, TYT ELECTRONICS CO., LTD Contact person: Jiamao Lin Title: Manager

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location Mobile radio Model: TH-9800 Brand name:TYT FCC ID: PODTH-9800 TH‐9800D,TH‐7800 TH‐7900

Report No.: AGC01039140401FE08 Page 1 of 27 FCC Test Report Report No.: AGC01039140401FE08 FCC ID PODTH‐9800 TYPE OF AUTHORIZATION : Certification APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Mobile radio BRAND NAME : TYT MODEL NAME : TH‐9800,TH‐9800D,TH‐7800,TH‐7900 CLIENT : TYT ELECTRONICS CO., LTD DATE OF ISSUE : May 16, 2014 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC01039140401FE08 Page 2 of 27 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid VersionNotes V1.0 / May 16, 2014Valid Original Report Report No.: AGC01039140401FE08 Page 3 of 27 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ............................................................................................................... 4 2. PRODUCT INFORMATION ........................................................................................................................... 5 3. TEST FACILITY ............................................................................................................................................. 6 4. SUPPORT EQUIPMENT LIST ....................................................................................................................... 7 5. SYSTEM DESCRIPTION ............................................................................................................................... 7 6 SUMMARY OF TEST RESULTS .................................................................................................................... 8 7. FCC RADIATED EMISSION TEST ................................................................................................................ 9 7.1. TEST EQUIPMENT OF RADIATED EMISSION ..................................................................... 9 7.2. LIMITS OF RADIATED EMISSION TEST ................................................................................ 9 7.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST ............................................................ 9 7.4 PROCEDURE OF RADIATED EMISSION TEST ................................................................... 10 7.5 TEST RESULT OF RADIATED EMISSION TEST ................................................................. 11 7.6 ANTENNA CONDUCTED POWER FOR RECEIVERS .................................................. 15 APPENDIX 2 .................................................................................................................................................... 19 PHOTOGRAPHS OF EUT ............................................................................................................................... 19 Report No.: AGC01039140401FE08 Page 4 of 27 1. VERIFICATION OF COMPLIANCE Applicant TYT ELECTRONICS CO., LTD Address Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Fujian Manufacturer TYT ELECTRONICS CO., LTD Address Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Fujian Product Designation Mobile radio Brand name: TYT Test Model TH-9800 Series model TH-9800D,TH-7800,TH-7900 Difference description All the same except the modle name and appearance. Date of test: May 12, 2014 to May 15, 2014 Deviation: None Condition of Test Sample Normal The above equipment was tested by Attestation Of Global Compliance Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2003. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Freddie Duan May 16, 2014 Checked By Kidd Yang May 16, 2014 Authorized By Solger Zhang May 16, 2014 Report No.: AGC01039140401FE08 Page 5 of 27 2. PRODUCT INFORMATION The EUT is a Mobile radio designed for voice communication. It is designed by way of utilizing the FM modulation achieves the system operating. A major technical description of EUT is described as following: Communication Type Voice / Tone only Modulation FM RX Frequency Range 28-29.7MHz/50-54MHz/144-148MHz/420-450MHz Emission Type 11KфF3E Antenna Designation Detachable Power Supply DC 13.8V by DC Source Adapter Parameter N/A I/O Port Information ( Applicable Not Applicable) I/O Port of EUT I/O Port Type Q’TY Cable Tested with DC Input Port 1 1.5m, Unshielded 1 Antenna Connect Port 1 0 1 USB Port 1 0 1 External Speaker connect Port 1 0 1 Report No.: AGC01039140401FE08 Page 6 of 27 3. TEST FACILITY Facility Attestation of Global Compliance (Shenzhen) Co., Ltd Location: B112-B113, Building 12, Baoan Building Materials Center, No.1 of Xixiang Inner Ring Road, Baoan District, Shenzhen, Guangdong, P.R.China Description: The test site is constructed and calibrated to meet the FCC requirements in documents ANSI C63.4:2003. Site Filing: The FCC Registration Number is 259865 Instrument Tolerance: All measuring equipment is in accord with ANSI C63.4 requirements that meet industry regulatory agency and accreditation agency requirement. Report No.: AGC01039140401FE08 Page 7 of 27 4. SUPPORT EQUIPMENT LIST Device Type Manufacturer Model Name Serial No. Data Cable Power Cable DC source Yidangfeng PS-305D N/A N/A N/A 5. SYSTEM DESCRIPTION EUT test procedure: 1. Connect EUT and peripheral devices. 2. Power on the EUT, the EUT begins to work. 3. Running data transmission and make sure the EUT normal working. EMC TEST MODES Note: Only the result of the worst case was recorded in the report. No. TEST MODES 1 Scanning mode + Receiving mode Report No.: AGC01039140401FE08 Page 8 of 27 6 SUMMARY OF TEST RESULTS FCC Rules Description Of Test Result §15.107 Conduction Emission N/A §15.10…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP FCC RADIATED EMISSION TEST SETUP