PP4DX-20BDual-Mode Cellular Phone (AMPS/CDMA)

Pantech Co., Ltd.

Click to zoom

Application Details

Equipment Class: TNE - Licensed Non-Broadcast Transmitter Held to Ear
Date of Grant: Sep 04, 2001
Application Purpose: Original Equipment
Date of Application: Jun 20, 2001
Equipment Note: Dual-Mode Cellular Phone (AMPS/CDMA)
Frequency Range: 824.70000000 - 848.31000000
Company: Pantech Co., Ltd.
Country: South Korea

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

For more information about RF exposure, please visit the FCC website at www.fcc.gov FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the Holster providing a minimal spacing of 2.5 cm. from the body to the back of the phone/antenna. To maintain compliance with FCC RF exposure compliance requirements, use only belt-clips, holsters or similar accessories that maintain a 2.5 cm. separation distance between the user’s body and the back of the phone, including the antenna. The use of third-party belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided. WARNING! Read this information before using your phone

Users Manual

~ SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES 1 SAFETY INFORMATION FOR I FCC RF EXPOSURE The following offenses are punishable by fine, imprisonment, or both: Using obscene, indecent, or profane language. Using the unit to give off false distress calls. Wiretapping or otherwise intercepting a telephone call, unless that person has first obtained the consent of the parties participating in the call. Making anonymous calls to annoy, harass, or molest other people. Charging to an account without authorization to avoid payment for service. Refusing to yield a party line when informed that it is needed for an emergency call (It is also unlawful to take over a party line by stating falsely that it is needed for an emergency). In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio fre- quency electromagnetic energy emitted by FCC regulated transmit- ters. Those guidelines are consistent with the safety standard previ- ously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these internation - al standards. Use only the supplied or an approved antenna. Unauthorized anten- nas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a demaged antenna. If a demaged anten- na comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operation with the back of the phone kept 1.0 inchs (2.5cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0 inchs (2.5cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. All belt-clips, holsters and similar accessories used by this device must not contain any metallic components. Body-worn acces- sories that do not meet these requirements may not comply with FCC RF exposure limits and should be avoided. Vehicle Mounted External Antenna(optiona1, if available) A minimum separation distance of 7.9 inches (20cm) must be main- tained between the usedbystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. Note: For more information about RF exposure, please visit the FCC website at www.fcc.oov

Attestation Statements

WYUNUAl San 136-1, Ami-Ri, Bubal -Eup, Icheon-Si, Kyoungki -Do, 467-701, Korea Fax No. : +82 2 580 5159 CURITEL Inc. Tel No. : +82 2 580 5445 Hyundai Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Date : JUNE 8, 2001 Subject : Authorization Letter To whom it may concern : We, the undersigned, hereby authorized PCTEST Engineering Laboratory, Inc. to act on our behalf in all manners relating to application for equipment author- ization, including signing of all documents relating to these manners. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. This authorization is valid until AUGUST 30, 2001. Sincerely Yours, Eui Kwon, Park General Manager of R&D 2 Team Hyundai Curitel Inc. HYUNDAI CURITEL INC. Qualit Assurance Office San 136-1, Ami-Ri, Bubal-Eub, Ichon -Si Kyoungki-Do, 467-fO1, Korea Int'l Stan cr ard Certification Team Date : JUNE 09, 2001 Federal Com mu nica t ions Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. In re : Hyundai Curitel Inc. FCC ID : PP4DX-20B Dual Mode Cellular PHONE(AMPS/CDMA) Part 22 Certification Request for Confidentiality Gentlemen : In accordance with 0.459 of CFR 47, Hyundai Curitel Inc. hereby requests confidentiality of the Block Diagrams attachment, Schematic Diagrams attachment,Operational Description attachment, and Part Listnune-Up Procedure attachment for the above -referenced Certification application. These documents contain detailed system and equipment description and related information about the product which Hyundai Curitel Inc. considers to be proprietary,confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Hyundai Curtel Inc. feels this information would be of benefit to its competitors, and that the discloure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely Yours, Kisoo Kim - Part Leader EMC Part of Int'l Standard Certification Team H YUNDAI Int CURITEL INC. Quality Assurance Off ice ‘I Standard Certification Team. San 136 -1, Ami-Ri, Bubal-Eub, Ichon -Si Kyoungki-Do, 467-fO1, Korea JUNE 09, 2001 Federal Communications Commission Authorization and Evaluation Division Eq u i pmen t Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. SUBJECT: HYUNDAI CURITEL INC. User’s Manual RF Exposure Warning Statement FCC ID: PP4DX-20B Gentlemen: HYUNDAI CURITEL INC. hereby confirms that the attached RF exposure warning page will be readily visible to the user, and will be placed at a prominent location in the front section of the user’s manual. If you have any questions regarding this matter, please do not hesitate to contact me or PCTEST Lab at (410) 290 -6652. Sincerely, Ki -Soo Kim - Part Leader EMC Part of Int’l Standard Certification Team m4d Y U W D A I HYUNDAI CURITEL INC. Quali Assurance Office Int'l Stan 8 ard Certification Team. San 136-1, Ami-Ri, Bubal-Eub, Ic hon-Si Kyoung ki-Do, 467-fO1, Korea Date : JUNE 09, 2001 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. SUBJECT : Hyundai Curitel Inc. FCC tD : PP4DX-30B DUAL-BAND PHONE (AMPS/CDMA) Part 22 - Certification FCC E911 Requirements Per 9 22.921 Gentlemen : Hyundai Curitel Inc. hereby certifies that the dual mode cellular phone(FCC ID : PP4DX-20B, using the Automatic A/B Roaming - lnteligent Retry Method, meets the E911 requirements specified in Section 22.921 of the FCC Rules. This procedure recognizes when a "9-1-1" call is made and, at such time, will override any programming in the mobile unit that determines the handling of a non-911 call and permit the call to be handled by other analog carriers. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Kisoo Kim - Part Leader EMC Part of Int'l Standard Certification Team HYUNDAI CURITEL INC. Qualit Assurance Off ice San 136-1, Ami-Ri, Bubal-Eub, Ichon -Si Kyoungki-Do, 467-fO1, Korea Int'l Stan 2 ard Certification Team. Date : JUNE 09, 2001 AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the Handheld Portable Cellular Phone (FCC ID : PP4DX-20B) is so designed that it complies with all the requirements for ESN protection specified in Section 22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. c) The ESN is factory-set and cannot be altered, transfered, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely Yours, ............................................ Kisoo Kim - Part Leader EMC Part of Int'l Standard Certification Team

Cover Letter(s)

June 11, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: HYUNDAI Curitel Inc. FCC ID: PP4DX-20B Part 22 Certification Gentlemen: Attached herewith, on behalf of HYUNDAI Curitel Inc. is an application for Part 22 Certification of the following Dual Mode Cellular Phone (AMPS/CDMA): FCC ID: PP4DX-20B TRADE / MODEL(s): HYUNDAI DX-20B EUT TYPE: Non-Broadcast Transmitter Held to Ear (TNE) Tx Freq. Range: 824.04 — 848.97 MHz (AMPS) 824.70 — 848.31 MHz (CDMA) Rx Freq. Range: 869.04 — 893.97 MHz (AMPS) 869.70 — 893.31 MHz (CDMA) Max. Output Power: 0.607 W ERP AMPS (27.835 dBm) 0.443 W ERP CDMA (26.462 dBm) Max. SAR Measurements: 1.310 mW/g (1g) AMPS Head SAR; 1.000 mW/g (1g) Cellular CDMA Head SAR; 0.419 mW/g (1g) AMPS Body SAR; 0.267 mW/g (1g) Cellular CDMA Body SAR Attached is the applicant’s Letter of Authorization, Confidentiality Request, ESN Affidavit, E911 compliance statement, measurement report data and plots, RF Exposure measurement report, FCC ID label and location, test setup photographs, internal and external photographs, block diagrams (confidential), schematic diagrams (confidential), operational description (confidential), parts list & tune-up procedure (confidential), and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. cc: Mr. Ki-Soo Kim, QA Dept. HYUNDAI Curitel Inc.

Cover Letter(s)

August 30, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Joe Dichoso SUBJECT: Hyundai Curitel Inc. FCC ID: PP4DX-20B 731 Confirmation No.: EA101427 Correspondence Reference No.: 20113 Request for Tech. Info.: 7/31/2001 Dear Joe: Transmitted herewith, on behalf of LG Electronics Inc., is an amendment provided in response to the request for technical information dated July 31, 2001. 1. Please find attached the SAR data points for the extended battery to compare to what was submitted. 2. Please find attached the revised users manual (page 83), which indicates the correct RF safety distance (2.5cm). We trust this information is sufficient to issue the grant as soon as possible. If you have any further questions, please do not hesitate to contact us. cc: Hyundai Curitel Inc.

External Photos

© 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA) © 2001 PCTEST Lab HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) NVLAP Lab Code: 100431-0 Dual-Mode Analog Phone (AMPS/CDMA)

ID Label/Location Info

© 2001 PCTEST Lab FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §§ 2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. (SEE NEXT PAGE) EXHIBIT. 4 IDENTIFICATION LABEL with regard to the FCC Rule Part 2.983 According to the requirement section 2.925 an 2.926, the sample label shown below shall be permanently affixed at a conspicuous location on the device supplied to the user and be readily visible to the purchaser at the time purchase. DCN PHONE FCC ID : PP4DX-20B SERIAL NO. : MADE IN KOREA HYUNDAI ELECTRONICS IND. CO., LTD. MODEL DX -20B

Internal Photos

RF Exposure Info

© 2001 PCTEST Engineering Lab., Inc. PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road • Columbia, MD 21045 • U.S.A. TEL (410) 290-6652 • FAX (410) 290-6654 http://www.pctestlab.com CERTIFICATE OF COMPLIANCE (SAR EVALUATION) HYUNDAI Curitel Inc. Dates of Tests: June 11-13, 2001 San 136-1, Ami-Ri, Bubal-Eub Test Report S/N: SAR.210611362.PP4 Ichon-Si, Kyungki-Do, KOREA 467-701 Test Site: PCTEST Lab, Columbia, MD USA Attn: Mr. Ki Soo Kim, QM Dept. System Quality Assurance Office FCC ID PP4DX-20B APPLICANT HYUNDAI Curitel Inc. EUT Type: Dual-Mode Analog Phone (AMPS/CDMA) Tx Frequency: 824.04 — 848.97 MHz (AMPS) 824.70 — 848.31 MHz (CDMA) Rx Frequency: 869.04 — 893.97 MHz (AMPS) 869.70 — 893.31 MHz (CDMA) Max. RF Output Power: 0.607 W ERP AMPS (27.835 dBm) 0.443 W ERP CDMA (26.462 dBm) Max. SAR Measurement: HEAD SAR: 1.310mW/g Amps Head SAR; 1.000mW/g CDMA Head SAR BODY SAR: 0.419mW/g Amps Body SAR; 0.267mW/g CDMA Body SAR Trade Name/Model(s): HYUNDAI DX-20B FCC Classification: Non-Broadcast Transmitter Held to Ear (TNE) Application Type: Certification FCC Rule Part(s): §2.1093; ET Docket 96.326 This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in ANSI/IEEE Std. C95.3-1992. (See Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NVLAP accreditation does not constitute any product endorsement by NVLAP or any agency of the United States Government. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. 210611362.PP4 SAR Measurement Report FCC Part 22 Certification © 2001 PCTEST Lab i Table of Contents 1.1 SCOPE 1 2.1 INTRODUCTION / SAR DEFINITION 2 3.1 SAR MEASUREMENT SET-UP 3 4.1 E-FIELD PROBE SYSTEM 4 5.1 E-FIELD PROBE CALIBRATION PROCESS 5-6 6.1 PHANTOM, HOLDER, & EQUIVALENT TISSUE 7 7.1 SYSTEM SPECIFICATIONS 8 8.1 MEASUREMENT PROCESS 9 9.1 TEST POSITION OF THE PHONE 10 10.1 BODY SAR TEST SETUP 11 11.1 ANSI/IEEE C95.1 RF EXPOSURE LIMITS 12 12.1 MEASUREMENT UNCERTAINTIES 13 13.1 TEST DATA SUMMARY 14-17 14.1 SAR TEST EQUIPMENT LIST 18 15.1 CONCLUSION 19 16.1 REFERENCES 20 Test Report S/N: SAR.210611362.PP4 SAR Measurement Report Test Date(s): June 11-13, 2001 FCC Part 22 Certification HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) © 2001 PCTEST Lab Dual-Mode Analog Phone (AMPS/CDMA) 1 SAR MEASUREMENT REPORT 1.1 Scope Environmental evaluation measurements of specific absorption rate 1 (SAR) distributions in simulated human head and body tissues exposed to radiofrequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 2 Company Name: HYUNDAI Curitel Inc. Address: San 136-1, Ami-Ri, Bubal-Eub Ichon-Si, Kyungki-Do, KOREA 467-701 Attention: Mr. Ki-Soo Kim, QM Dept. System Quality Assurance Office • EUT Type: Dual-Mode Analog Phone (AMPS/CDMA) • Trade Name / Model: HYUNDAI DX-20B • FCC IDENTIFIER: PP4DX-20B • Tx Frequency: 824.04 — 848.97 MHz (AMPS) 824.70 — 848.31 MHz (CDMA) • Rx Frequency: 869.04 — 893.97 MHz (AMPS) 869.70 — 893.31 MHz (CDMA) • Application Type: Certification • FCC Classification: Non-Broadcast Transmitter Held to Ear (TNE) • Modulation(s): AMPS / CDMA • FCC Rule Part(s): §2.1093, Docket 96-326 • Max. RF Output Power: 0.607W ERP - AMPS (27.835 dBm) 0.443W ERP - CDMA (26.462 dBm) • Max. SAR Measurement: 1.310mW/g Amps Head SAR; 1.000mW/g CDMA Head SAR 0.419mW/g Amps Body SAR; 0.267mW/g CDMA Body SAR • Antenna Specifications: ACE Technology Model: DX-20B (Fixed Antenna) 3.41 cm ~ length • Battery Pack: 3.6VDC; 950mAh • Dates of Tests: June 11-13, 2001 Place of Tests: PCTEST Engineering Lab. Columbia, MD, U.S.A. • Report Serial No.: SAR.210611362.PP4 1 Specific Absorption Rate (SAR) is a measure of the rate of energy absorption due to exposure to an RF transmitting source (wireless portable device). 2 IEEE/ANSI Std. C95.1-1992 limits are used to determine compliance with FCC ET Docket 93-62. Fig. 1 SAR Test Setup Test Report S/N: SAR.210611362.PP4 SAR Measurement Report Test Date(s): June 11-13, 2001 FCC Part 22 Certification HYUNDAI FCC ID: PP4DX-20B (Model: DX-20B) © 2001 PCTEST Lab Dual-Mode Analog Phone (AMPS/CDMA) 2 2.1 INTRODUCTION The FCC has adopted the guidelines for evaluating the environmental effects of radiofrequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institute (ANSI) for localized specific absorption rate (SAR) in IEEE/ANSI C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. (c) 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.[2] The measurement procedure described in IEEE/ANSI C95.3-1992 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave[3] is used for guidance in measuring SAR due to the RF radiation exposure from the Equipment Under Test (EUT). These criteria for SAR evaluation are similar to those recommended by the National Council on Radiation Protection and Measurements (NCRP) in Biological Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields,” NCRP Report No. 86 (c) NCRP, 1986, Bethesda, MD 2…

Text truncated - open the document above for the full version.

RF Exposure Info

HYUNDAI FCC ID:PP4DX-20B -- FM Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.23 mW/g, SAR (10g): 0.907 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0991 [824.04MHz] Conducted Power = 27.0dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 1.14E-1 3.42E-1 5.71E-1 7.99E-1 1.03E+0 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- FM Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.08 mW/g, SAR (10g): 0.767 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0383 [836.49MHz] Conducted Power = 27.0dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 9.66E-2 2.90E-1 4.83E-1 6.76E-1 8.69E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- FM Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.31 mW/g, SAR (10g): 0.940 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0799 [848.97MHz] Conducted Power = 27.0dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 1.22E-1 3.65E-1 6.08E-1 8.51E-1 1.09E+0 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.957 mW/g, SAR (10g): 0.700 mW/g HYUNDAI DualMode Model:DX-20B Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 25.5dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 8.52E-2 2.56E-1 4.26E-1 5.96E-1 7.67E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.757 mW/g, SAR (10g): 0.550 mW/g HYUNDAI DualMode Model:DX-20B Cellular CDMA Mode, Ch.0363 [835.89MHz] Conducted Power = 25.5dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 6.72E-2 2.02E-1 3.36E-1 4.70E-1 6.05E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Head SAR Generic Twin Phantom; Left Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.00 mW/g, SAR (10g): 0.729 mW/g HYUNDAI DualMode Model:DX-20B Cellular CDMA Mode, Ch.0777 [848.37MHz] Conducted Power = 25.5dBm Test Date -- 06/11/2001 SAR Tot [mW/g] 8.96E-2 2.69E-1 4.48E-1 6.27E-1 8.06E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- FM Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.358 mW/g, SAR (10g): 0.258 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0991 [824.04MHz] Conducted Power = 27.0dBm; Spacing = 2.5cm from flat phantom to phone, w/Holster Test Date -- 06/11/2001 SAR Tot [mW/g] 3.33E-2 9.99E-2 1.67E-1 2.33E-1 3.00E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- FM Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.258 mW/g, SAR (10g): 0.185 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0383 [836.49MHz] Conducted Power = 27.0dBm; Spacing = 2.5cm from flat phantom to phone, w/Holster Test Date -- 06/11/2001 SAR Tot [mW/g] 2.47E-2 7.41E-2 1.23E-1 1.73E-1 2.22E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- FM Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.419 mW/g, SAR (10g): 0.300 mW/g HYUNDAI DualMode Model:DX-20B FM Mode, Ch.0799 [848.97MHz] Conducted Power = 27.0dBm; Spacing = 2.5cm from flat phantom to phone, w/Holster Test Date -- 06/11/2001 SAR Tot [mW/g] 4.17E-2 1.25E-1 2.08E-1 2.92E-1 3.75E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.267 mW/g, SAR (10g): 0.193 mW/g HYUNDAI DualMode Model:DX-20B Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 25.5dBm; Spacing = 2.5cm from flat phantom to phone, w/Holster Test Date -- 06/11/2001 SAR Tot [mW/g] 2.47E-2 7.41E-2 1.23E-1 1.73E-1 2.22E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 0.239 mW/g, SAR (10g): 0.171 mW/g HYUNDAI DualMode Model:DX-20B Cellular CDMA Mode, Ch.0363 [835.89MHz] Conducted Power = 25.5dBm; Spacing = 2.5cm from flat phantom to phone, w/Holster Test Date -- 06/11/2001 SAR Tot [mW/g] 2.24E-2 6.72E-2 1.12E-1 1.57E-1 2.02E-1 PCTEST Engineering Laboratory, Inc. HYUNDAI FCC ID:PP4DX-20B -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Positi…

Text truncated - open the document above for the full version.

RF Exposure Info

Probe ET3DV6 SN:1560 Manufactured:December 1, 2000 Calibrated:February 20, 2001 Calibrated for System DASY3 Page 1 of 8 ET3DV6 SN:1560 DASY3 - Parameters of Probe: ET3DV6 SN:1560 Sensitivity in Free SpaceDiode Compression NormX1.48 μV/(V/m) 2 DCP X98mV NormY1.51 μV/(V/m) 2 DCP Y98mV NormZ1.43 μV/(V/m) 2 DCP Z98mV Sensitivity in Tissue Simulating Liquid Head450MHz ε r =43.5 ± 5% σ = 0.87 ± 10% mho/m ConvF X7.17 extrapolatedBoundary effect: ConvF Y7.17 extrapolatedAlpha0.25 ConvF Z7.17 extrapolatedDepth3.21 Head900MHz ε r =42 ± 5% σ = 0.97 ± 10% mho/m ConvF X6.59 ± 7% (k=2)Boundary effect: ConvF Y6.59 ± 7% (k=2)Alpha0.32 ConvF Z6.59 ± 7% (k=2)Depth2.93 Head1500MHz ε r =40.4 ± 5% σ = 1.23 ± 10% mho/m ConvF X5.82 interpolatedBoundary effect: ConvF Y5.82 interpolatedAlpha0.41 ConvF Z5.82 interpolatedDepth2.55 Head1800MHz ε r =40 ± 5% σ = 1.40 ± 10% mho/m ConvF X5.43 ± 7% (k=2)Boundary effect: ConvF Y5.43 ± 7% (k=2)Alpha0.46 ConvF Z5.43 ± 7% (k=2)Depth2.36 Sensor Offset Probe Tip to Sensor Center2.7mm Optical Surface Detection2.0 ± 0.2mm Page 2 of 8 ET3DV6 SN:1560 Receiving Pattern (φ), θ = 0° f = 30 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 100 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 300 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 900 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot Page 3 of 8 ET3DV6 SN:1560 Isotropy Error (φ), θ = 0° -1.00 -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0.60 0.80 1.00 060120180240300360 error[dB] 30 MHz 100 MHz 300 MHz 900 MHz 1800 MHz 2500 MHz f = 1800 MHz, WG R22 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 2500 MHz, WG R26 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot Page 4 of 8 ET3DV6 SN:1560 Frequency Response of E-Field ( TEM-Cell:ifi110, Waveguide R22) 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 050010001500200025003000 f [MHz] frequency response TEMR22 Page 5 of 8 ET3DV6 SN:1560 Dynamic Range f(SAR brain ) ( TEM-Cell:ifi110 ) ET3DV6 SN:1560 1.E+0 1.E+1 1.E+2 1.E+3 1.E+4 1.E+5 1.E+6 1.E+7 0.00010.0010.010.11.10.100. mW/cm 3 μ V not compensatedcompensated -2.0 -1.0 0.0 1.0 0.0010.010.1110100 mW/cm 3 errror[dB] Page 6 of 8 Conversion Factor Assessment Head900MHz ε r =42 ± 5% σ = 0.97 ± 10% mho/m ConvF X6.59 ± 7% (k=2)Boundary effect: ConvF Y6.59 ± 7% (k=2)Alpha0.32 ConvF Z6.59 ± 7% (k=2)Depth2.93 Head1800MHz ε r =40 ± 5% σ = 1.40 ± 10% mho/m ConvF X5.43 ± 7% (k=2)Boundary effect: ConvF Y5.43 ± 7% (k=2)Alpha0.46 ConvF Z5.43 ± 7% (k=2)Depth2.36 ET3DV6 SN:1560 f = 900 MHz, WG R9 (head) 0.00 0.10 0.20 0.…

Text truncated - open the document above for the full version.