Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 6 | 15C | 5.78 GHz - 5.78 GHz | 569.00 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.75 W/kg and 0.75 W/kg respectively.
