Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 3 | 15C | 2.42 GHz - 2.46 GHz | 189.00 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg.
