PPNM2-100Optical USB Extension Module

Opticis Optical USB Extension Module (M2-100 User’s Manual) Contents Precautions 1.Package Content 2. Introduction 2.1 Function 3. Installation 3.1 Set-up 3.2 Connection 4.Trouble Shooting 5.Specifications 5.1 Opticis Optical USB Extension Module 5.2 AC-To-DC 6. Warranty Precautions WARNING Do not dismantle the housing or modify the module. Dismantling the housing or modifying the module may result in electrical shock or burn. Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards. Keep the module away from liquids. Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls/spills into the housing,unplug the module immediately. Have the module checked by a qualified service engineer before using it again. Do not touch the powered transmitter(Tx) and powered receiver(Rx) at the same time. M1-100 module is designed for long distance connection, so the Tx and Rx is isolated electrically. Touching the powered transmitterand powered receiver at the same time may result in electrical shock. Do not touch the module with wet hands. Touching the housing and plug with wet hands is dangerous and can cause electrical shock. 1. Package Contents 1.1 Opticis Optical USB Module Module(M2-100) 1.2 AC-To-DC Adapter 2. Introduction Our Optical USB Extension Module M2-100 links the USB signal up to 50 meter without any repeater. 2.1 Function -One Up-Stream Module, A Socket, One Down-Stream Module -Compatible with USB 1.1 (12Mbps, 1.5Mbps) -Application with self-powered 3. Installation 3.1 Set-Up -Hard Ware Condition : PC applied by USB ports. -Soft Ware Condition : Window 98, Window Me, Windows 2000 -AC-To-DC Adapter Requirements : 5 V, 600mA (Core is 5 V) 3.2 Connection -Connect M2-100 with the adapter. -Connect “A”plug in M2-100 with PC’s USB ports(Figure.1) -Connect USB peripheral device(key board, mouse, camearEtc) with USB downstream port(A Receptacle) (Figure.1) 4. Trouble shooting 1. Select the menu “Start “from Window. 2. “Setting”‡“Control Panel”, and then double-click “System”. 3. Select the tab “Device Manager”. 4. Make“USB Controller”expanded by clicking “+”next to “USB Controller” in “Device Manager”(If this item is not, pls refer to problem #1 from the solution table.) 5. Click and select “General USB Hub”. (If this item is not,plsrefer to problem #2 from the solution table.) 6. Click and select “Property”. 7. Make sure the sentence “Installation functions rightly”is shown in “Installation state”. a) In this case, you can see “Opticis Optical USB Extension Module” is functioning well. If other equipments connected with “Opticis Optical USB Extension Module”don’t work, pls refer to problem #4 from the solution table. b) Otherwise, pls refer to problem #3 from the solution table. If you are to check out its functioning, plstake action as below. When a problem is found, apply the suggested remedies on the next page. N OProblemsExpected CausesSuggested Remedies 1 “USB Controller” is not installed. Your Window system does not apply for USB. Contact PC manufacturer and request them to reinforce USB function. 2 “General USB Hub” is not installed by operation system. Our product, M2-100 is not connected rightly. Check if downstream port is rightly power-connected and then connect it again after pull-off upstream cable. 3 Opticis Optical USB Extension Module does not work. Although you perform above described actions, Opticis Optical USB Extension Module does not work rightly. Try no.2 remedy once more. If it does not work even after, contact Optics service center . 4 An equipment connected to Opticis Optical USB Extension Module does not work. Although you perform above described actions, the equipment has a problem in itself. Contact supplier or manufacturer of the equipment for solution. 5 Opticis Optical USB Extension Module is connected but it is shown as “Unrecognizable device” Downstream part of Opticis Optical USB is not power- connected. Check if downstream port is rightly power-connected and then connect it again after pull-off upstream cable. * Solution Table* 5. Specifications 1) Opticis Optical USB Module (M2-100) Size (Width x Length x Height) Up-stream: Down-stream: Length (Whole): Packaging: Weight: Net weight : Gross weight : Power input 5V DC 600mA Speed High: 12Mbps Low: 1.5Mbps 2) Power –Adapter Power input: A.C-100~240 V, 5060Hz 0.1A Power output: 5C DC 600mA 6. Warranty •1 (One) Year Warranty •Warranty Limitation and Exclusion Opticis shall have no further obligation under the foregoing limited warranty if the product has been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifications, tampering, alterations, or service other than by Opticis or its authorized agents, causes other than from ordinary use or failure to properly use the product inthe application for which said product is intended. * FCC LABELLING REQUIREMENTS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. INFORMATION TO THE USER INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television rec…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA I/V CONV. Fiber Host I/F Device I/F Fiber Collision Detetor Enable Driver Enable Driver Collision Detetor I/V CONV. (USB A Plug) USB hub controller X-tal 6MHz (USB A Receptacle) or (USB B Plug) <Doc><RevCode> <Title> B 11Tuesday, June 26, 2001 Title SizeDocument NumberRev Date:Sheetof VCC VCC PD 1 2 LD LDPD 1 2

FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab .

FCC ID. : PPNM2-100 File No. : E016R-048 ONETECH Testing & Evaluation Lab . IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : PPNM2-100 FCC ID AREA

FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab .

Page 1 of 13 FCC ID.: PPNM2-100 File No.: E016R-048 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- Si, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . E LECTROMAGNETIC E MISSION C OMPLIANCE R EPORT FOR FCC C LASS B C ERTIFICATION Test report file number : E016R-048 Applicant : OPTICIS CO., LTD. A ddre s s: Suite A 906-2, Techno-Park, 150 Yatap-Dong, Sungnam-City, Kyungki-Do, 463-070, Korea Manufacture r : OPTICIS CO., LTD. A ddre s s: Suite A 906-2, Techno-Park, 150 Yatap-Dong, Sungnam-City, Kyungki-Do, 463-070, Korea Type of Equipme nt : O ptical USB Exte nsion Module FCC ID: PPNM2-100 Model / Type No. : M2-100 Se rial numbe r: N/ A Total page of Report: 13 pages (including this page) Date of Incoming: February 08, 2001 Date of issuing : June 27, 2001 SUMMARY The equipment complies with the requirements of FCC CFR 47 PART 15 SUBPART B, Class B . This test report contains only the result of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Y. K. Kw on / Chief EngineerS. S. Hong / Managing Director EMC Dept.ONETECH Corp. ONETECH Corp. Page 2 of 13 FCC ID.: PPNM2-100 File No.: E016R-048 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- Si, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . CONTENTS Page 1. VERIFICATION OF COMPLIANCE ................................................................................................................ 3 2. GENERAL INFORMATION .................................................................................................................................. 4 2.1 P RODUCT D ESCRIPTION ............................................................................................................................................. 4 2.2 R ELATED S UBMITTAL ( S ) / G RANT ( S ) ...................................................................................................................... 4 2.3 T EST S YSTEM D ETAILS .............................................................................................................................................. 5 2.4 T EST M ETHODOLOGY ................................................................................................................................................ 5 2.5 T EST F ACILITY ............................................................................................................................................................ 5 3. SYSTEM TEST CONFIGURATION ................................................................................................................... 6 3.1 J USTIFICATION ............................................................................................................................................................. 6 3.2 EUT EXERCISE S OFTWARE ........................................................................................................................................ 6 3.3 C ABLE D ESCRIPTION .................................................................................................................................................. 6 3.4 N OISE S UPPRESSION P ARTS ON C ABLE ................................................................................................................... 7 3.5 E QUIPMENT M ODIFICATIONS .................................................................................................................................... 7 3.6 C ONFIGURATION OF T EST S YSTEM .......................................................................................................................... 7 4. PRELIMINARY TEST .............................................................................................................................................. 8 4.1 AC P OWER LINE C ONDUCTED E MISSION T EST ..................................................................................................... 8 4.2 R ADIAT ED E MISSION T EST ........................................................................................................................................ 8 5. FINAL RESULT OF MEASURMENT ............................................................................................................... 9 5.1 C ONDUCTED E MISSION T EST .................................................................................................................................... 9 5.2 R ADIAT ED E MISSION T EST ...................................................................................................................................... 11 6. FIELD STRENGTH CALCULATION ............................................................................................................. 12 7. LIST OF TEST EQUIPMENT ............................................................................................................................. 13 Page 3 of 13 FCC ID.: PPNM2-100 File No.: E016R-048 This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- S…

Text truncated - open the document above for the full version.

FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab . FCC ID.: PPNM2-100 File No.: E016R-048 ONETECH Testing & Evaluation Lab .