PQ4IPROI3220GSM Mobile Phone

Color-screen Call Phone i3220 User’s Manual 2 Contents 1 General Information .......................................................................................................................4 1.1 Introduction .........................................................................................................................4 1.2 Safety ..................................................................................................................................4 1.3 Warning and Notice.............................................................................................................4 1.3.1 Basic Notices................................................................................................................... 4 1.3.2 Notices of Your Phone .....................................................................................................5 1.3.3 Notices of Battery Use..................................................................................................... 5 1.3.4 Notices of Charger Use ...................................................................................................6 1.3.5 Care and Maintenance .................................................................................................... 7 1.3.6 General Notices............................................................................................................... 7 2 Getting Started ...............................................................................................................................8 2.1 Overview and Introduction .................................................................................................8 2.1.1 Product Specification ...................................................................................................... 8 2.2 Keypad ................................................................................................................................8 2.3 Battery .................................................................................................................................8 2.4 Network Connections..........................................................................................................9 2.4.1 SIM Card ......................................................................................................................... 9 2.4.2 Insert and Remove the SIM Card .................................................................................... 9 2.4.3 Turn Your Phone On or Off ............................................................................................. 9 2.4.4 Phone unlock................................................................................................................. 10 2.4.5 Unlock the SIM Card..................................................................................................... 10 2.4.6 Connect to the Network ................................................................................................. 10 2.4.7 Make Calls .................................................................................................................... 10 2.4.8 Make Domestic Calls .....................................................................................................11 2.4.9 Dial Extension................................................................................................................11 2.4.10 International telephone Calls.......................................................................................11 2.4.11 Dial the Numbers of Phonebook...................................................................................11 2.4.12 Emergency Number ..................................................................................................... 12 2.4.13 Answer Calls ............................................................................................................... 12 2.4.14 Call Records ................................................................................................................ 12 2.4.15 Call Menu.................................................................................................................... 12 3 Function Menus............................................................................................................................13 3.1 Use of Function Menus .....................................................................................................13 Scroll Searching and Selection Function ............................................................................... 13 Exit Menus.............................................................................................................................. 13 3.2Call Center .........................................................................................................................13 3.2.1 Call history .....................................................................................................................13 3.2.2 Call settings....................................................................................................................13 3.3 Phonebook.........................................................................................................................14 3.4 Messages ...........................................................................................................................14 3.4.1 Write Message ................................................................................................14 3 3.4. 2 Inbox .............................................................................................................14 3.4. 3 Outbox...........................................................................................................15 3.4. 4 Drafts.............................................................................................................15 3.4. 5 SMS Settings .....................................................…

Text truncated - open the document above for the full version.

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – Front View EUT – Rear View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View EUT – AC/DC Adapter View EUT – AC/DC Adapter Label View EUT – Front View (White color) EUT – Rear View (White color) EUT – Bottom View (White color)

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Battery off View EUT – Cover off View GSM Antenna EUT – Main Board Top with Display View EUT – Main Board Top View EUT – Main Board Bottom View 1 EUT – Main Board Bottom View 2 BT Antenna EUT – Main Board Bottom Shielding off View EUT – Display Top View EUT – Display Back View EUT – Battery View

ser i a l number Part number Supplierspecifications Part specifications Amount Part Place Manufacture 1 21-00028004-YAG RC0402JR-070RL RES-0Ω, +/-5% ,1/16W-0402 17 C108 C607 C608 C611 C612R224 R225 R235 R236 B303R304 R501 R502 R503 R507R510 R731 Yageo 2 21-20011008-YAG RL0805FR-070R2L RES-0.2Ω,+/- 1%, 1/8W-0805 1 R301 Y AGEO 3 21-10228004-YAG RC0402JR-0710RL RES-10Ω, +/-5% ,1/16W-0402 7 R312 R701 R702 R703 R704R705 R706 Yageo 4 21-18228004-YAG RC0402JR-0718RL RES-18Ω, +/-5% ,1/16W-0402 2 R610 R611 YAGEO 5 21-33228004-YAG RC0402JR-0733RL RES-33Ω,+/- 5%, 1/16W-0402 2 R508 R509 YAGEO 6 21-82528004-YAG RC0402JR-0782RL RES-82Ω, +/-5%, 1/16W-0402 1 R306 Yageo 7 21-10328004-YAG RC0402JR-07100RL RES-100Ω, +/-5%,1/16W-0402 2 R217 R218 Yageo 8 21-10428004-YAG RC0402JR-071KL RES-1K, +/-5%, 1/16W-0402 14 R201 R202 R203 R204 R206R207 R208 R209 R210 R303R401 R402 R607 R630 Yageo 9 21-20428004-YAG RC0402JR-072KL RES-2K, +/-5%, 1/16W-0402 1 R313 YAGEO 10 21-47428004-YAG RC0402JR-074K7L RES-4.7K, +/-5% ,1/16W-0402 2 R219 R220 Yageo 11 21-10528004-YAG RC0402JR-0710KL RES-10K, +/-5% ,1/16W-0402 3 R102 R314 R631 YAGEO 12 21-20528004-YAG RC0402JR-0720KL RES-20K,+/- 5%, 1/16W-0402 2 R309 R345 YAGEO 13 21-30528004-YAG RC0402JR-0730KL RES-30K,+/- 5%, 1/16W-0402 1 R103 Yageo 14 21-47528004-YAG RC0402JR-0747KL RES-47K,+/- 5%, 1/16W-0402 3 R505 R621 R622 Yageo 15 21-10628004-YAG RC0402JR-07100KL RES-100K,+/- 5%,1/16W-0402 8 R310 R431 R432 R433 R434R435 R504 R629 Yageo 16 26-100D6504-TAI UMK105CG100DV-F CAP-10PF,+/-0.5PF,C0G,50V-0402 9 C152 C153 C200 C408 C409C410 C422 C423 C424 Taiyo 17 26-330J6504-TAI UMK105CG330JV-F CAP-33PF,+/-5,C0G,50V-0402 18 C380 C391 C401 C402 C403C411 C412 C413 C601 C602C604 C605 C675 C676 C681C683 C903 C908 TAIYO 18 26-560J6504-TAI UMK105CG560JV-F CAP-56PF,+/-5,C0G,50V-0402 3 C132 C222 C419 Taiyo 19 26-101J6504-TAI UMK105CG101JV-F CAP-100PF,+/-5,C0G,50V-0402 6 C101 C384 C603 C606 C616C682 Taiyo General manager: Roncent Communication Organizer:liuwei Produce Auditing: Hardware Auditing: ME Auditing:operation Majordomo: Item：8127ACEdition：2.2DATE：2012.08.09 BOM RF Auditing: Stock Auditing: Item Auditing: R&D Majordomo ： Item Majordomo: ser i a l number Part number Supplierspecifications Part specifications Amount Part Place Manufacture 20 26-221J6504-YAG CC0402JRNPO9BN221 CAP-220PF,+/-5,C0G,50V-0402 2 C 124 C633 YEAGO 21 26-102K6204-TAI UMK105BJ102KV-F CAP-1nF,+/-10%,X7R,50V-0402 5 C10 0 C102 C125 C619 C620 Taiyo 22 26-472K6204-MUR GRM155R71H472KA01D CAP-4.7nF,+/-10%,X7R,50V-0402 2 C624 C625 Murata 23 26-104K2604-TAI LMK105BJ104KV-F CAP-100nF,+/-10%,X5R,10V-0402 9 C237 C301 C310 C320 C404C414 C502 C649 C803 Taiyo 24 26-105K2604-TAI LMK105BJ105KV-T CAP-1uF,+/-10%,X5R,10V-0402 26 C202 C203 C204 C205 C211C212 C303 C315 C317 C321C322 C323 C325 C326 C327C328 C329 C331 C332 C333C334 C405 C406 C425 C801C802 Taiyo 25 26-225K1606-YAG CC0603KRX5R5BB225 CAP-2.2uF,+/-10%,X5R,6.3V-060 3 1 C324 YEAGO 26 26-475K1606-TAI JMK107BJ475KA-T CAP-4.7uF,+/-10%,X5R,6.3V-0603 9 C309 C312 C318 C420 C530C610 C613 C614 C648 Taiyo 27 26-475K2606-YAG CC0603KRX5R6BB475 CAP-4.7uF,+/-10%,X5R,10V-0603 1 C300 Yageo 28 26-106K3208-MUR GRM21BR61A106KE19L CAP-10uF,+/-10%,X5R,10V-0805 2 C306 C314 Murata 29 26-226M1608-MUR GRM21BR60J226ME39L CAP-22uF,+/-20%,X5R,6.3V-080 5 2 C104 C236 MURATA 30 30-82012104-MUR LQG15HS8N2J02D IND-MULTILAYER-8.2nH,+/-5%,300mA-0402 2 L201 L701 Murata 31 30-47076100-MIC MGFL2012C4R7MT-LF IND-MULTILAYER-4.7uH,+/-20%,0.35Ω,600mA-0806,h=1.25mm 2 L301 L302 Microgate 32 34-1005M102-MIC MGGB1005M102HT-LF IND-BEAD,DCR-1.3,1KΩ@100MHz,2 50mA-0402 7 B601 B602 B603 B604 B606B630 B631 Microgate 33 34-1608M601-MIC MGLB1608M601 IND-BEAD,DCR-0.35,600Ω@100MHz,800m A-0603 3 B501 B609 B610 Microgate 34 11-CT8853A0-RDA CT8853A IC-CPU,GSM without GPRS BASEBAND PROCESSOR,with BT and FM intergrated,12*10,TFBGA207 1 U200 RDA 35 11-GD25Q32B-GDE GD25Q32BVIGR IC-SERIAL-MEMORY,32Mbits,3V,8-PIN TSOP8,8.10*5.38*1.00mm,1.27mm pitch 1 U401 Gigadevice 36 11-2010BIF0-SIE SN2010BIF09E IC-AUDIO PA,2.7W, Mono Filterless Class-Daudio PA,L1.5*W1.5*0.65(mm), UTQFN-9 1 U600 SI-EN 37 12-RB520S30-ROH RB520S-30FJTE61 DIODE-Schottky BarrierDiode,1A,Vf=0.5V@If=200mA,30V,Size=1.6*0.8*0.6mm,Pad=0.3*0.3mm,EMD2(SC-79) 1 D314 Rohm 38 12-0603BL31-AOT AOT-0603BL31A-N0-N-3 DIODE-LED,BLUE,VF=2.8@5mA, VR=5V,0603 6 HL701 HL702 HL703 HL704HL705 HL706 AOT 39 13-DTC143ZM-ROH DTC143ZM T2L NPN,digital transistors,with bias resistorR1=4.7K,R2/R1=10,50V,Imax=100mA,200mW,250MHz,1.2*1.2*0.5mm,VMT3 1 Q501 ROHM 40 14-TPCF8B01-TOS TPCF8B01(TE85L,F,M） P-CHANNEL MOS FET WITH SCHOTTKY BARRIERDIODE, 20V,3.6A, 1206-8 ChipFET 1 U302 Toshiba 41 22-120E220N-SFI SFI0402-120E220NP-LF VARISTOR-12V,22P-0402 1 T202 SFI IC-CPU,GSM not supportGPRS BASEBAND PROCESSOR, ser i a l number Part number Supplierspecifications Part specifications Amount Part Place Manufacture 42 22-SFI0050E-SFI SFI0402-050E050PP-LF VARISTOR-5.0V,5P-0402 11 T201 T501 T505 T506 T507T508 T510 T605 T606 T801T802 SFI 43 10-8127MV11-WZU 8127_MB_V1.1 8127_MB_V1.1_PCB(4PTH) 1 WUZHU 44 26-270J6504-YAG CC0402JRNPO9BN270 CAP-27PF,+/-5,C0G,50V-0402 1 C2 09 YEAGO 45 30-10032104-MUR LQG15HSR10J02D IND-MULTILAYER-100nH,+/-5%,100mA-0402 1 L204 Murata 46 11-RDA66250-RDA RDA6625 IC-RFPA/FEM ,QUAD-BAND GSM850/GSM900/DC S/PC S 1 U101 RDA 47 26-1R0C6504-MUR GRM1555C1H1R0CZ01D CAP-1pF,+/-0.25pF,C0G,50V-0402 1 C137 Murata 48 26-6R0C6504-TAI UMK105CG060CW-F CAP-6PF,+/-0.25PF,C0G,50V-0402 1 C103 TAIYO 49 26-220J6504-MUR GRM1555C1H220JZ01D CAP-22PF,+/-5,C0G,50V-0402 4 C 111 C112 C126 C128 Murata 50 30-18019104-MUR LQG15HS1N8S02D IND-MULTILAYER-1.8nH,+/-0.3nH,300mA-0402 1 C107 Murata 51 30-22019104-MUR LQG15HN2N2S02D IND-MULTILAYER-2.2nH,+/-0.3nH,300mA-0402 1 L118 Murata 52 30-27019104-MUR LQG15HN2N7S02D IND-MULTILAYER-2.7nH,+/-0.3nH,300mA-0402 2 L111 L117 Murata 53 30-33019104-MUR LQG15HS3N3S02D IND-MULTILAYER-3.3nH,+/-0.3nH,300mA-0402 3 C123 C156 C157 Murata 54 30-62019104-MUR LQG15HS6N2S02D IND-MULTILAYER-6.2nH,+/-0.3nH,300mA-0402 …

Text truncated - open the document above for the full version.

Tune-Up Procedure Tune-Up TX Content 1 PURPOSE............................................................................................................................................ 2 2 GENERAL DESCRIPTION............................................................................................................... 3 2.1 CHARACTERISTICS OF THE TRANSMIT BURST........................................................................................... 3 3 PARAMETERS.................................................................................................................................... 4 3.1 PARAMETERS USED TO SHAPE THE BURST................................................................................................ 4 3.2 PARAMETERS USED TO DEFINE THE TEMPORAL POSITION OF THE BURST................................................... 4 3.2.1 Optimum position of the burst.................................................................................................4 3.2.2 Optimum length of the burst...................................................................................................4 4 OPERATING MODE.......................................................................................................................... 5 4.1 HOW TO TRANSMIT A TCH BURST (RANDOM DATA), IN GSM850 PCS1900 MODE, AT POWER CONTROL LEVEL MAX :.................................................................................................................................................. 5 4.2 HOW TO STOP TX MEASUREMENTS:......................................................................................................... 5 4.3 HOW TO TRANSMIT A BURST AFTER MODIFYING PARAMETERS................................................................... 5 5 PURPOSE............................................................................................................................................ 6 6 AUTOMATIC FREQUENCY CONTROL......................................................................................... 6 7 STATIC FREQUENCY ERROR AND RANGE............................................................................... 7 2 1 Purpose This panel gives the possibility to manage the mobile in the transmit mode. This window includes both: - All the parameters (frequency band, RF channel, RF level to get the desire antenna output power...) The user needs to make the mobile transmitting, - All the parameters needed to define a transmit burst, - All the compensation table to be able to align the mobile in production. This Tx_commands user guide is describing: - The characteristics of the transmit burst, - All the parameters used in the transmit mode, - The operating mode to make the mobile transmitting 3 2 General description 2.1 Characteristics of the transmit burst The power levels and the shape of a transmit burst are controlled by the power amplifier controller integrated in the CT8853A. The burst is generated by a 10-bit DAC from the CT8853A as shown below: The ramping shape is referenced with the rising edge of Tx-ON (from the Baseband). There are two types of parameters define the transmit burst: the first one define the shapes of the burst, and the second one define the temporal position of the burst. The rising and the falling edge of the transmit burst are determined by a set of 32 DAC code values n = 0 ... 31. Tru = TxTRU Default + △TRU_P + △TRU_T Trd = TxTRD_NBDefault + △TRD_P (for a normal burst). Trd = TxTRD_ABDefault + △TRD_P (for an access burst). 4 3 Parameters F (n) are values coming from the DAC to shape the transmit burst. Some F(n) values have a corresponding Parameter used in the TAT to align the mobiles. Parameter used in TAT = [F (n)]. 3.1 Parameters used to shape the burst - H0 = [F (1)] controls the rate at which energy is given to the control loop at the beginning of the ramp. This energy is needed to bring the PA system control in a closed loop. This is the second code coming from the CT8853A DAC. - PeakPow = [F (15)] corresponds to the peak power of the transmit burst. - H30 = [F (30)] corresponds to the last ramping coefficients used to shape the ramp. - MinPow = [F (31)] is a fixed parameter and corresponds to the Code Start of the TQM6M4028U specification. It ensures a fast discharge of accumulated energy during the open loop mode in the summing node. 3.2 Parameters used to define the temporal position of the burst 3.2.1 Optimum position of the burst This parameter is TRU (or △TRU_P) on the panel, in the Optimal Burst. This is the burst starting time correction, which is optimised for each power control level. (Note that _P means that the parameter is a power compensation parameter). 3.2.2 Optimum length of the burst This parameter is TRD (or △TRD_P) on the panel, in the Optimal Burst. This is the burst length compensation, which is optimized for each power control level. (Note that _P means that the parameter is a power compensation parameter). 5 4 Operating mode 4.1 How to transmit a Tch burst (Random data), in GSM850 PCS1900 mode, at power control level max: GSM850/ PCS1900: Connect the mobile with special software,(meta phone tool) 选择RF Tool .TX level and profile - set Band: GSM850/ PCS1900, - set ARFCN Channel: 192/661, - setPCL: 5/0 Press START ,then you can check the burst with CMU200 or Agilent 8960; it must fit the curve below. The request of the Power vs. Time. 4.2 How to stop Tx measurements: Press STOP command to stop the TX. 4.3 How to transmit a burst after modifying parameters Please note that each time a parameter (such as parameter used to shape the burst) is changed, then the user have to: download to flash to validate the parameter modification. If the command is not performed, the old parameters are taken into account. 6 5 Purpose This panel gives the description of the Frequency plan. This window includes both: - Automatic frequency control (AFC), - Static frequency error and range, - Dynamic frequency error and range 6 Automatic f…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” SAR EVALUATION REPORT For HONG KONG IPRO TECHNOLOGY CO., LIMITED ROOM C1D, 6/F, WING HING INDUSTRIAL BUILDING, 14 HING YIP STREET, KWUN TONG, KOWLOON, HONG KONG FCC ID: PQ4IPROI3220 Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Sandy Wang Report Number: RSZ120829001-20 Report Date: 2012-09-11 Reviewed By: Alvin Huang RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ120829001-20 SAR Evaluation Report 2 of 85 Attestation of Test Results Company Name HONG KONG IPRO TECHNOLOGY CO., LIMITED EUT Description GSM Mobile Phone FCC ID PQ4IPROI3220 Model Number i3220 EUT Information Test Date 2012.09.04-2012.09.05 Frequency Max. SAR Level(s) Measured Limit (W/Kg) Cellular Band 0.485 W/kg 1g Head SAR 0.616 W/kg 1g Body SAR PCS Band 0.397 W/kg 1g Head SAR 0.487 W/kg 1g Body SAR 1. 6 ANSI/IEEE C95.1 : 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds, 3 kHz to 300 GHz. ANSI/IEEE C95.3 : 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. OET BULLETIN 65 SUPPLEMENT C Evaluating Compliance with FCC Guidelines for Human Exposure To Radiofrequency Electromagnetic Fields Applicable Standards IEEE1528: 2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in ANSI/IEEE Standards and has been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C and IEEE 1528-2003. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ120829001-20 SAR Evaluation Report 3 of 85 TABLE OF CONTENTS DOCUMENT REVISION HISTORY .........................................................................................................................4 EUT DESCRIPTION ....................................................................................................................................................5 TECHNICAL SPECIFICATION.........................................................................................................................................5 REFERENCE, STANDARDS AND GUILDELINES ................................................................................................6 SAR LIMITS.................................................................................................................................................................7 FACILITIES AND ACCREDITATION .....................................................................................................................8 DESCRIPTION OF TEST SYSTEM ..........................................................................................................................9 EQUIPMENT LIST AND CALIBRATION .............................................................................................................16 EQUIPMENTS LIST & CALIBRATION INFORMATION....................................................................................................16 SAR MEASUREMENT SYSTEM VERIFICATION ..............................................................................................17 LIQUID VERIFICATION...............................................................................................................................................17 SYSTEM ACCURACY VERIFICATION...........................................................................................................................20 SAR SYSTEM VALIDATION DATA .....................................................................................................................21 EUT TEST STRATEGY AND METHODOLOGY .................................................................................................29 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................29 CHEEK/TOUCH POSITION...........................................................................................................................................30 EAR/TILT POSITION...................................................................................................................................................30 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS..............................................................................31 SAR EVALUATION PROCEDURE.................................................................................................................................32 CONDUCTED OUTPUT POWER MEASUREMENT ...........................................................................................33 TEST BLOCK DIAGRAM AND PROCEDURE..................................................................................................................33 TEST RESULTS...................................................................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” FCC PART 22H, PART 24E TEST REPORT For HONG KONG IPRO TECHNOLOGY CO., LIMITED ROOM C1D, 6/F, WING HING INDUSTRIAL BUILDING, 14 HING YIP STREET, KWUN TONG, KOWLOON, HONG KONG FCC ID: PQ4IPROI3220 Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Mick Yin Report Number: RSZ120829001-00C Report Date: 2012-09-11 Reviewed By: Sula Huang RF Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ120829001-00C FCC Part 22H/24E Page 2 of 30 TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 FCC §1.1307 & §2.1093 - RF EXPOSURE..................................................................................................................8 APPLICABLE STANDARD..............................................................................................................................................8 TEST RESULT...............................................................................................................................................................8 FCC §2.1047 - MODULATION CHARACTERISTIC ..............................................................................................9 FCC §2.1046, §22.913 (A) &§24.232 (C) - RF OUTPUT POWER..........................................................................10 APPLICABLE STANDARD............................................................................................................................................10 TEST PROCEDURE......................................................................................................................................................10 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................10 TEST DATA................................................................................................................................................................11 FCC §2.1049, §22.917, §22.905 & §24.238 – EMISSION BANDWIDTH...............................................................13 APPLICABLE STANDARD............................................................................................................................................13 TEST PROCEDURE......................................................................................................................................................13 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................13 TEST DATA..................................................................................................................…

Text truncated - open the document above for the full version.