
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, T ests for each device are performed in positions and locations as required by the FCC. For Head, this device has been tested and meets the FCC RF exposure guidelines. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the device a minimum of 5mm from the body. Noncompliance with the above restrictions may result in violation of RF exposure guidelines. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio fre quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
CFR 47 §2.911(d)(7)U.S Agent U.S. AGENTLETTEROF ATTESTATION Date: 2026-01-19 FEDERALCOMMUNICATIONSCOMMISSION Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,MD 21046 Ref: AttestationStatementsCFR 47 §2.911(d)(7)Filing FCC ID: PQ4IPROV20S HONGKONGIPRO TECHNOLOGYCO.,LIMITED(“the Applicant”) certifiesthat, as of the date of the filing of the application,BridgeportAdvisoryLLC (U.S. agent ). is our designatedU.S. agent for serviceof processfor the above referencedFCC ID. HONG KONGIPRO TECHNOLOGYCO.,LIMITED(“the Applicant”) acceptsto maintainan agent for no less than one year after the granteehas terminatedall marketingand importationor the conclusionof any Commission-relatedproceedinginvolvingthe equipment. BridgeportAdvisoryLLC (U.S. agent ) accepts,as of the date of the filing of the application, the obligationof the designatedU.S. agent for serviceof processfor the above referenced FCC ID. DesignatedU.S. Agent Information: CompanyName:BridgeportAdvisoryLLC Address:3330 W 38TH PL, CHICAGO,IL 60632,UnitedStates FRN: 0037566148 Tel.: +1 (708) 680-6688 Email : [email protected] Signedby (printedname) : Yong Liu Signature: Applicant:HONGKONGIPRO TECHNOLOGYCO.,LIMITED Add: 12/F., San Toi Building137-139ConnaughtRoad, CentralHK FRN: 0022013585 Tel: 0755-83829199 Email:[email protected] Signedby (printedname) : Frank Fan Signature:
Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 1 / 6 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 2 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 3 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 4 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 5 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-EXP Page 6 / 6 *****END *****
33.5*34mm Model:V20S SN:IPROV20S00000125148 WCDMA:B2/B5/B8 LTE:B2/B4/B7/B8/28AB FCC ID:PQ4IPROV20S Model:V20S SN:IPROV20S00000125148 WCDMA:B2/B5/B8 LTE:B2/B4/B7/B8/28AB FCC ID:PQ4IPROV20S
Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 1 / 9 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 2 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 3 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 4 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 5 / 9 WWAN Main Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 6 / 9 FM Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 7 / 9 Bluetooth Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 8 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-INP Page 9 / 9 *****END *****
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502A23267E-RF-00A Report Template Version: FCC-BT-V2.2 Page 65 of 65 EXHIBIT C - RF EXPOSURE EVALUATION Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result The max conducted power including tune-up tolerance is 5.5 dBm (3.55 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =3.55/5*(√2.480) = 1.1< 3.0 Note: the max conducted power including tune-up tolerance was declared by manufacturer. Result: Compliant. The stand-alone SAR evaluation is not necessary. ***** END OF REPORT *****
深圳市瑞通电子有限公司 Shenzhen Ruitong Electronics Co Ltd 天线规格书(Antenna specification) 1-1. 天 线 尺寸图(Antenna size diagram) 1-2, 项目基本信息( Basic project information) 天线型号(Antenna type) L076 频段(Frequency GSM:850/900/1800/1900 WCDMA:B2/5/8 band) LTE:B2/4/7/8/28,BT(2400-2500MHz) 天线类型(Type of antenna) PIFA/Wire 公司名(Company name) 深圳市瑞通电子有限公司 (Shenzhen Ruitong Electronics Co Ltd ) 地址Address 深圳市龙华大浪街道华旺路23号诚和德工业区2栋 313-314/313-314, Building 2, Chenghede Industrial Zone, No. 23, Huawang Road, Dalang Street, Longhua District, Shenzhen 2:天线增益(Antenna gain) Antenna Max. Peak Gain: PEAK GAIN 2G: Frequency range Effi % Gaim dBi GSM850 824~849MHz 21.80-0.74 GSM900880~960MHz 20.84-1.01 DCS18001710~1880MHz 28.620.62 PCS1900 1850~1910MHz 30.810.82 3G: W2 1850~1910MHz 30.810.82 W5 824~849MHz 22.07 -0.74 W8 880~960MHz 21.80-1.01 4G: LTE-B2 1850~1910MHz 30.810.82 LTE-B4 1710~1755MHz 31.070.89 LTE-B7 2500~2570MHz 32.80 1.1 LTE-B8 880~960MHz 19.03-1.01 LTE-B28 708~790MHz 20.41 -1.41 BT2400~2500MHz 42.511.37 3. 天线苹果图(Apple antenna diagram) Efficient ( 698-798MHz ) Efficient ( 791-894MHz) Efficient ( 880-960MHz ) Efficient (1710-1880MHz ) Efficient ( 1710-1990MHz ) Efficient ( 1920-2170MHz ) Efficient ( 2500-2690MHz ) 2400MHz~2500MHz Efficient ( 2.4G-WIFI/BT 2400-2500MHz )
Report Template Version: FCC-BT-V2.2 Page 1 of 65 TEST REPORT Applicant: HONG KONG IPRO TECHNOLOGY CO.,LIMITED Address: 12/F., San Toi Building137-139 Connaught Road, Central HK Product Name: Mobile Phone F C C I D : PQ4IPROV20S Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2020 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2502A23267E-RF-00A Report Date: 2026/1/15 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502A23267E-RF-00A Report Template Version: FCC-BT-V2.2 Page 2 of 65 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................. 4 1. GENERAL INFORMATION ........................................................................................................... 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................. 5 1.2 ACCESSORY INFORMATION ........................................................................................................................ 5 1.3 ANTENNA INFORMATION DETAIL▲ .......................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 3. DESCRIPTION OF TEST CONFIGURATION ............................................................................ 7 3.1 OPERATION FREQUENCY DETAIL .............................................................................................................. 7 3.2 EUT OPERATION CONDITION .................................................................................................................... 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ................................................................................................. 7 3.4 SUPPORT CABLE LIST AND DETAILS .......................................................................................................... 7 3.5 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................. 8 3.6 TEST FACILITY .......................................................................................................................................... 10 3.7 MEASUREMENT UNCERTAINTY ................................................................................................................ 10 4. REQUIREMENTS AND TEST PROCEDURES ......................................................................... 11 4.1 AC LINE CONDUCTED EMISSIONS ........................................................................................................... 11 4.1.1 Applicable Standard ............................................................................................................................................ 11 4.1.2 EUT Setup ........................................................................................................................................................... 12 4.1.3 EMI Test Receiver Setup .................................................................................................................................... 12 4.1.4 Test Procedure ..................................................................................................................................................... 13 4.1.5 Corrected Amplitude & Margin Calculation ....................................................................................................... 13 4.1.6 Test Result ........................................................................................................................................................... 13 4.2 RADIATED SPURIOUS EMISSIONS ............................................................................................................. 14 4.2.1 Applicable Standard ............................................................................................................................................ 14 4.2.2 EUT Setup ........................................................................................................................................................... 14 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................. 16 4.2.4 Test Procedure ..................................................................................................................................................... 17 4.2.5 …
Text truncated - open the document above for the full version.
Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-00A-TSP Page 1 / 5 TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-00A-TSP Page 2 / 5 Radiated Emission 9k-30MHz Parallel View Radiated Emission 9k-30MHz Perpendicular View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-00A-TSP Page 3 / 5 Radiated Emission 9k-30MHz Ground-parallel View Radiated Emission 30M-1GHz View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-00A-TSP Page 4 / 5 Radiated Emission 1-18GHz View Radiated Emission 18-25GHz View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502A23267E-RF-00A-TSP Page 5 / 5 RF Conducted Test Photo *****END *****
3330 W 38TH PL · Chicago, Illinois, 60632 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 3.00 mW |

Mobile Phone
Equipment Class
PCE - PCS Licensed Transmitter held to ear
Mobile Phone
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral
Smart Phone
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Smart Phone
Equipment Class
PCE - PCS Licensed Transmitter held to ear
Mobile Phone
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter