PQ4IPROMAGICGSM Mobile Phone

1 Magic User’s Manual 2 TABLE OF CONTENT 1. BASIC INFORMATION.................... 6 1.1. BRIEF INTRODUCTION........................................... 6 2. BEFORE USE ..................................... 7 2.1. NAME AND EXPLANATION OF EACH PART............. 7 2.1.1. Appearance Sketch Map ........................... 7 2.1.2. Description of the Standby Pictures.......... 7 2.1.3. Description of Keys .................................. 9 2.2. INSTALL SIM CARD AND MEMORY CARD........... 10 2.2.1. SIM Card................................................. 10 2.2.2. Inserting and Taking out SIM Card ........ 11 2.2.3. Memory Card .......................................... 12 2.3. BATTERY............................................................ 12 2.3.1. Install the Battery .................................... 12 2.3.2. Charging.................................................. 14 2.4. SECURITY PASSWORD......................................... 14 3. QUICK USER GUIDE ..................... 16 3 3.1. FEATURE FUNCTIONS.......................................... 16 3.2. DIAL A CALL....................................................... 18 3.3. REJECT A CALL................................................... 18 3.4. RECEIVE A CALL................................................. 18 3.5. END A CALL........................................................ 18 3.6. EMERGENCY SERVICES....................................... 19 3.7. EXTENSION SPEED DIAL..................................... 19 3.8. DIALED CALLS/MISSED CALLS/RECEIVED CALLS/REJECTED CALLS.............................................. 19 3.9. CALL FORWARD.................................................. 19 3.10. CALL WAITING................................................... 20 3.11. CALL BARRING................................................... 20 3.12. POWER OFF THE PHONE...................................... 20 3.13. T-FLASH CARD................................................... 21 4. FUNCTION MENU .......................... 21 4.1. CALL LOGS......................................................... 21 4.1.1. Dialed calls.............................................. 21 4.1.2. Received calls ......................................... 22 4.1.3. Missed calls............................................. 22 4.1.4. Rejected calls .......................................... 22 4.1.5. Delete all ................................................. 23 4 4.1.6. Call timer ................................................ 23 4.1.7. Call cost .................................................. 23 4.2. CONTACTS.......................................................... 24 4.2.1. New ......................................................... 24 4.2.2. Search...................................................... 24 4.2.3. SMS......................................................... 25 4.2.4. Call .......................................................... 25 4.2.5. Delete ...................................................... 25 4.2.6. Mark ........................................................ 25 4.2.7. Copy ........................................................ 25 4.2.8. Others ...................................................... 26 4.3. INTERNET........................................................... 26 4.4. TOOLS................................................................ 27 4.4.1. Alarm ...................................................... 27 4.4.2. Bluetooth................................................. 27 4.4.3. Calendar .................................................. 28 4.4.4. Calculator ................................................ 29 4.4.5. World clock............................................. 29 4.4.6 STK ..................................................................... 30 4.5. MESSAGE.............................................................. 30 4.5.1. Write Message ........................................ 30 4.5.2. Inbox ....................................................... 31 4.5.3. Outbox..................................................... 32 5 4.5.4. Drafts....................................................... 33 4.5.5. Sentbox ................................................... 33 4.5.6. Templates ................................................ 33 4.5.7. Voice mail server .................................... 34 4.5.8. Settings.................................................... 34 4.5.9. Message capacity .................................... 36 4.6. MULTIMEDIA...................................................... 36 4.6.1. Camera .................................................... 36 4.6.2. Image browser......................................... 38 4.6.3. Video recorder ........................................ 39 4.6.4. Video Player............................................ 40 4.6.5. Audio Player ........................................... 40 4.6.6. Recorder .................................................. 41 4.6.7. FM Radio ................................................ 42 4.7. APPLICATION ................................................. 43 4.8. FILE MANAGEMENT............................................ 43 4.9. SETTINGS............................................................ 44 4.9.1. Call Settings ............................................ 44 4.9.2. Phone settings ......................................... 49 4.9.3. Display settings ....................................... 49 4.9.4. Security settings ...................................... 51 4.9.5 PROFILES.......................................................... 52 6 5. TEXT INPUT .................................... 55 6. CARE AND MAINTENANCE ........ 56 1. Basic Information 1.1. Brief Introduction Thanks for selecting Magic color screen GSM digital mobile phone. Through reading the manual, you can fully know how to use Magic mobile phone, appreciate its complete function and simple operating method. Magic color screen mobile phone is designed …

Text truncated - open the document above for the full version.

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT– Front View EUT– Rear View EUT – Top View EUT – Bottom View EUT– Left Side View EUT – Right Side View EUT – Adapter View EUT – Adapter Label View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Battery off View EUT – Cover off View EUT – Main Board Top with LCD and Keyboard View EUT – Main Board Top without LCD View EUT – Main Board Top View EUT – Main Board Bottom View 1 GSM Antenna BT Antenna EUT – Main Board Bottom View 2 EUT – Main Board Bottom Shielding off View EUT – LCD Top View EUT – LCD Bottom View EUT – Battery View

Tune-Up Procedure Tune-Up TX Content 1 Purpose................................................................. 2 2 General description .................................................... 3 2.1 Characteristics of the transmit burst............................... 3 3 Parameters.............................................................. 4 3.1 Parameters used to shape the burst.................................. 4 3.2 Parameters used to define the temporal position of the burst........ 4 3.2.1 Optimum position of the burst .................................. 4 3.2.2 Optimum length of the burst..................................... 4 4 Operating mode.......................................................... 5 4.1 How to transmit a Tch burst (Random data), in GSM850 mode, channel 190; PCS1900 mode, channel 661, at power control level max: ........................... 5 4.2 How to stop Tx measurements: ....................................... 5 4.3 How to transmit a burst after modifying parameters.................. 5 5 Purpose................................................................. 6 6 Automatic frequency control ............................................ 6 1 Purpose This panel gives the possibility to manage the mobile in the transmit mode. This window includes both: -all the parameters (frequency band, RF channel, RF level to get the desire antenna output power...) the user needs to make the mobile transmitting, - all the parameters needed to define a transmit burst, -all the compensation table to be able to align the mobile in production. This Tx commands user guide is describing: - the characteristics of the transmit burst, - all the parameters used in the transmit mode, - the operating mode to make the mobile transmitting 2 General description 2.1 Characteristics of the transmit burst The power levels and the shape of a transmit burst are controlled by the power amplifier controller integrated in the SR528. The burst is generated by a 10-bits DAC from the SC6610 as shown below: The ramping shape is referenced with the rising edge of Tx-ON (from the Baseband).There are two types of parameters define the transmit burst: the first one define the shapes of the burst, and the second one define the temporal position of the burst. The rising and the falling edge of the transmit burst are determined by a set of 32 DAC code values n = 0 ... 31. Tru = TxTRUDefault + △ TRU_P + △ TRU_T Trd = TxTRD_NBDefault + △ TRD_P (for a normal burst). Trd = TxTRD_ABDefault + △ TRD_P (for an access burst). 3 Parameters F(n) are values coming from the DAC to shape the transmit burst. Some F(n) values have a corresponding parameter used in the TAT to align the mobiles. Parameter used in TAT = [F(n)]. 3.1 Parameters used to shape the burst -H0 = [F(1)] controls the rate at which energy is given to the control loop at the beginning of the ramp. This energy is needed to bring the PA system control in a closed loop. This is the second code coming from the VC5268 DAC. -PeakPow = [F(15)] corresponds to the peak power of the transmit burst. -H30 = [F(30)] corresponds to the last ramping coefficients used to shape the ramp. -MinPow = [F(31)] is a fixed parameter and corresponds to the Code Start of the SKY77569 specification. It ensures a fast discharge of accumulated energy during the open loop mode in the summing node. 3.2 Parameters used to define the temporal position of the burst 3.2.1 Optimum position of the burst This parameter is TRU (or △ TRU_P) on the panel, in the Optimal Burst. This is the burst starting time correction, which is optimized for each power control level. (Note that _P means that the parameter is a power compensation parameter). 3.2.2 Optimum length of the burst This parameter is TRD (or △ TRD_P) on the panel, in the Optimal Burst. This is the burst length compensation, which is optimized for each power control level. (Note that _P means that the parameter is a power compensation parameter). 4 Operating mode 4.1 How to transmit a Traffic Channel burst (Random data), in GSM850/EGSM900 mode; DCS1800/PCS1900 mode at power control level max: Connect the mobile with a special software, Configuration of the common parameters: - band: GSM850/ EGSM900/DCS1800/PCS1900, - channel: 192/62/699/661, - RF level: PCL5/ PCL5/PCL0/PCL0, -Burst select: Mode Tch Random Press STAR command to start continuous TX, you can check the burst with CMU200 or Agilent 8960, it must fit the curve below. The request of the Power vs Time. 4.2 How to stop Tx measurements: Press STOP command to stop the TX. 4.3 How to transmit a burst after modifying parameters. Please note that each time a parameter (such as parameter used to shape the burst) is changed, then the user have to: ” Download to flash” to validate the parameter modification. If the command is not performed, the old parameters are taken into account. 5 Purpose This panel gives the description of the Frequency plan. This window includes both: - Automatic frequency control(AFC), - Static frequency error and range, - Dynamic frequency error and range 6 Automatic frequency control Depending on the chosen 26 MHz Crystal and on the spread on the Crystal, the init voltage for the AFC command could change. On production line, on each handset, an initial frequency alignment procedure is done to compensate all components tolerances. In Case of DCXO implementation, 2 parameters are used for the Reference Clock alignment in order to guarantee a low frequency error at each switch-ON of the handset. This compensation is done by internal capacitors data bank of the SR528 that can be switched. One parameter called DCXO_CDAC defining the coarse initial frequency tuning by the 7 CDAC bits of the SR528. Second parameter called DCXO_CAFC defining the fine initial frequency tuning by the 13 CAFC bits of the SR528. Table 1: Alignment parameter related to reference clock - Generic General conditions: Power supply is set to nominal battery voltage on VBAT. Switch ON the mobile in TAT…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” SAR EVALUATION REPORT For HONG KONG IPRO TECHNOLOGY CO., LIMITED ROOM C1D, 6/F, WING HING INDUSTRIAL BUILDING, 14 HING YIP STREET, KWUN TONG, KOWLOON, HONG KONG. FCC ID: PQ4IPROMAGIC Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Sandy Wang Report Number: RSZ121112003-20 Report Date: 2012-11-27 Reviewed By: Alvin Huang RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp.(Shenzhen) Report No: RSZ121112003-20 SAR Evaluation Report 2 of 91 Attestation of Test Results Company Name HONG KONG IPRO TECHNOLOGY CO., LIMITED EUT Description GSM Mobile Phone FCC ID PQ4IPROMAGIC Model Number Magic EUT Information Test Date 2012.11.21-2012.11.22 Frequency Max. SAR Level(s) Measured Limit(W/Kg) Cellular Band 0.152 W/kg 1g Head SAR 0.540 W/kg 1g Body SAR PCS Band 0.141 W/kg 1g Head SAR 0.202 W/kg 1g Body SAR 1. 6 ANSI / IEEE C95.1 : 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds,3 kHz to 300 GHz. ANSI / IEEE C95.3 : 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. OET BULLETIN 65 SUPPLEMENT C Evaluating Compliance with FCC Guidelines for Human Exposure To Radiofrequency Electromagnetic Fields Applicable Standards IEEE1528:2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in ANSI/IEEE Standards and has been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C and IEEE 1528-2003. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp.(Shenzhen) Report No: RSZ121112003-20 SAR Evaluation Report 3 of 91 TABLE OF CONTENTS DOCUMENT REVISION HISTORY .........................................................................................................................4 EUT DESCRIPTION ....................................................................................................................................................5 TECHNICAL SPECIFICATION.........................................................................................................................................5 REFERENCE, STANDARDS, AND GUILDELINES ...............................................................................................6 SAR LIMITS.................................................................................................................................................................7 FACILITIES AND ACCREDITATION .....................................................................................................................8 DESCRIPTION OF TEST SYSTEM ..........................................................................................................................9 EQUIPMENT LIST AND CALIBRATION .............................................................................................................16 EQUIPMENTS LIST & CALIBRATION INFORMATION....................................................................................................16 SAR MEASUREMENT SYSTEM VERIFICATION ..............................................................................................17 LIQUID VERIFICATION...............................................................................................................................................17 SYSTEM ACCURACY VERIFICATION...........................................................................................................................20 SAR SYSTEM VALIDATION DATA .....................................................................................................................21 EUT TEST STRATEGY AND METHODOLOGY .................................................................................................29 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................29 CHEEK/TOUCH POSITION...........................................................................................................................................30 EAR/TILT POSITION...................................................................................................................................................30 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS..............................................................................31 SAR EVALUATION PROCEDURE.................................................................................................................................32 CONDUCTED OUTPUT POWER MEASUREMENT ...........................................................................................33 PROVISION APPLICABLE............................................................................................................................................33 TEST PROCEDURE................................................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” FCC PART 22H, PART 24E TEST REPORT For HONG KONG IPRO TECHNOLOGY CO., LIMITED ROOM C1D, 6/F, WING HING INDUSTRIAL BUILDING, 14 HING YIP STREET, KWUN TONG, KOWLOON, HONG KONG, China FCC ID: PQ4IPROMAGIC Report Type: Original Report Product Type: GSM Mobile Phone Test Engineer: Jimmy Xiao Report Number: RSZ121112003-00C Report Date: 2012-11-26 Reviewed By: Suny Sun EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ121112003-00C FCC Part 22H/24E Page 2 of 28 TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................5 EQUIPMENT MODIFICATIONS.......................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................5 SUMMARY OF TEST RESULTS...............................................................................................................................6 FCC §1.1307 & §2.1093 - RF EXPOSURE..................................................................................................................7 APPLICABLE STANDARD..............................................................................................................................................7 TEST RESULT...............................................................................................................................................................7 FCC §2.1047 - MODULATION CHARACTERISTIC ..............................................................................................8 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) - RF OUTPUT POWER........................................................................9 APPLICABLE STANDARD..............................................................................................................................................9 TEST PROCEDURE........................................................................................................................................................9 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................9 TEST DATA................................................................................................................................................................10 FCC §2.1049, §22.917, §22.905 & §24.238 - BANDWIDTH ....................................................................................12 APPLICABLE STANDARD............................................................................................................................................12 TEST PROCEDURE......................................................................................................................................................12 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................12 TEST DATA................................................................................................................................................................12 FCC §2.1051, §22.917(A) & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS ..................16 APPLICABLE STANDARD............................................................................................................................................16 TEST PROCEDURE......................................................................................................................................................16 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................16 TEST DATA................................................................................................................................................................16 FCC §2.1053, §22.917 & §24.238 - SPURIOUS RADIATED EMISSIONS ....…

Text truncated - open the document above for the full version.