PQA-2YESL001BLUETOOTH SPEAKER

Thank you for purchasing the Sinclair Audio loudspeakers, you are about to greatly enhance your listening experience. At Sinclair Audio we strive to create loudspeakers and loudspeaker systems engineered to deliver the best value in stereo and home theatre applications. Sinclair Audio loudspeakers are designed for ease of use, installation, and will provide you with excellent sound quality for years to come. Reading this manual will assist you in getting acquainted with your Sinclair Audio system. Sinclair Audio provides a 1 year parts and service warranty on all driv- ers and amplifiers. To obtain servicing, please contact your Sinclair Audio representative. The original bill of sale is re- quired for service. Merci pour avoir choisi les enceintes de Sinclair Audio, vous êtes sur le point d’améliorer de façon extraordinaire votre expérience d’écoute. Chez Sinclair Audio nous travaillons sans cesse à créer des haut-parleurs et des enceintes conçus pour offrir le meilleur rendement possible pour les utilisations en stéréophonie et pour le cinéma maison. Les enceintes Sinclair Audio sont conçues pour être faciles à utiliser et à installer, de plus elles vous offriront une excel- lente qualité sonore pendant de nombreuses années. La lec- ture de ce mode d’emploi vous aidera à vous familiariser avec vos enceintes Sinclair Audio. Sinclair Audio offre une garantie d’une (1) année sur les pièces et sur le service pour tous les haut-parleurs et les amplificateurs. Pour obtenir du service sous garantie, veuillez communiquer avec votre représentant Sinclair Audio. La facture originale de l’achat doit être présentée pour obtenir du service. WBT50 Owners Manual Manuel de l’Utilisateur 5.25” Active Bluetooth Speakers Haut-parleurs amplifié Bluetooth à 133mm 1. Read Instructions - All the safety and operation instructions should be read before the sound bar is operated. 2 Reta Instructions - The safety and operating instructions should be kept for future reference. 3. Heed Warnings - All warnings on the sound bar and in these operating instructions should be followed. 4. Follow Instructions - All operating and other instructions should be followed. 5. Water and Moisture - The sound bar should not be used near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool. 6. Ventilation - The Sound Bar should be situated so that its location or position does not interfere with its proper ventilation. For example, the system should not be situated on a bed, sofa, rug or similar surface that may block airflow past the rear heat sinks; or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air past the heat sinks. 7. Heat - The sound bar should be situated away from heat sources such as radiators, heaters, furnace outflow vents or other devices which produce heat. 8. Power Sources - The Sound Bar should be connected to a power supply only of the type described in these operation instructions or as marked on the Component. 9. Grounding or Polarization - The sound bar is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is an intentional safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete (unpolarized) outlet. Do not defeat the safety purpose of the polarized plug. 10. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit the Sound Bar. To prevent electric shock, do not use the sound bar polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. 11. Non-use Periods - The power cord of the sound bar should be unplugged from the outlet when left unused for a long period of time. 12. Damage Requiring Service - The sound bar should be serviced only by qualified service personnel when: A.Sound Bar power supply cord or the plug has been damaged; or B.Objects have fallen or liquid has spilled into the sound bar; or C. The sound bar has been exposed to rain; or D.The sound bar does not appear to operate or exhibits a marked change in performance; or E. The sound bar has been dropped or damaged. 13.Servicing - The user should not attempt to service the sound bar beyond those means described in this operating manual. All other servicing should be referred to an authorized Service Center. 14.Cleaning - Unplug the sound bar from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 15.Attachments - Do not use attachments not recommended as they may cause hazards. 16.Accessories - Do not place the sound bar on an unstable cart, stand, tripod, bracket, or table. The sound bar may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by manufacturer, or sold with the product. Any mounting of the sound bar should follow manufacturer's instructions, and should use a mounting accessory recommended by manufacturer. An sound bar and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 17. Lightning - For added protection for the sound bar during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. 18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19. Safety Check - Upon completion of any service or repairs to…

Text truncated - open the document above for the full version.

1.8V 3.3V 1.8V BC5-MM Audio in/out PIO0 ~ PIO11 AIO0 ~ AIO1 UART PCM (BC57E687CG) Balun/ Filter (RFBPB2012090A1T) 2.4GHz Radio Regulator Stereo Audio Codec Baseband DSP RAM Kalimba DSP PIO MCU Crystal 26MHz/10ppm Flash 8M Bits (SST39VF1601-70-4I-B3KE)G BTM512 Block Diagram RF in/out 2402 ~ 2480MHz

Jam Industries Ltd. 21000 Trans-Canadienne Bale D'Urfe, Quebec Canada FCC ID: PQA-2YESL001 POWER OF ATTORNEY 2012/9/5 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize I-Test Laboratory (MR. Pauler LI, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by I-Test Laboratory (MR. Pauler LI, Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on 2012/12/5. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Jam Industries Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sine Mr Detfid Aggerholm Manager

GUANG ZHOU SONICSTAR ELECTRONICS CO.LTD 广州笙达电器有限公司 美术稿确认表 ARTWORK APPROVAL FORM： Content： 设计/日期 审核/日期 批准/日期 Part No./编号： Part Name./品名： Model No./型号： Brand Name./铭牌：Date./日期： Job No./工作表编号： 148 mm 2 3 8 m m MG-01 WBT50 2012-09-04 Sinclair audio 后板丝印 要求: 1、丝印内容正确; 2、丝印图字清晰，位置准确； 3、丝印色：白色 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Right Ch.output Optical 1 in Aux 1 in Aux 2 in Sub out Line in/out R L Optical 2 in Digital in USB charge AC input Power consumption 120W ～230-240V 50Hz T1.0AL 250V ～110-120V 60Hz T2.0AL 125V ～- ～- Power Voltage selector 1 1 5 ONOFF USB 1 USB 2 ++ -- 5V/500mA5V/500mA FCC ID:PQA-2YESL001 IC:7430A-2YESL001 Serial Number: Brighton WBT50 DR-SL1202（E）-02

RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 and RSS 102 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times | E | 2 , |H | 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times | E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/500 30 1500-100000 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2. MPE Calculation Method E (V/m)=(30*P*G) 0.5 /d Power Density: Pd(W/m 2 )=E 2 /377 E=Electric Field (V/m) P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to Pd= (30*P*G)/(377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit 1) Normal: Frequenc y (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402 1.0 4.361 2.730 0.0054 1 Compliance 2441 1.0 3.765 2.379 0.0047 1 Compliance 2480 1.0 1.894 1.546 0.0030 1 Compliance EDR: Frequenc y (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402 1.0 4.411 2.761 0.0055 1 Compliance 2441 1.0 4.374 2.738 0.0054 1 Compliance 2480 1.0 2.625 1.830 0.0036 1 Compliance

1 2 3 4 5 6 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size C Date: 22-Oct-2009 Sheet of File: D:\Coordiwise\design\module\BTM _51\BTM_51_V01C\BTM_51_V01C.ddb Drawn By: RF_N L1 RF_P K1 RX_N J1 RX_P H1 AUX_DAC H2 VSS_AUDIO A1 VSS_AUDIO D3 VSS_DIG B4 VSS_DIG C4 VSS_DIG C12 VSS_DIG C13 VSS_DIG C14 VSS_DIG H3 VSS_DIG L13 VSS_DIG N4 VSS_DIG N8 VSS_DIG N13 VSS_RADIO J2 VSS_RADIO K2 VSS_RADIO L2 VSS_LO K3 VSS_LO L3 VSS_ANA P2 VSS C3 VSS F6 VSS F7 VSS F8 VSS F9 VSS F10 VSS G6 VSS G7 VSS G8 VSS G9 VSS G10 VSS H6 VSS H7 VSS H8 VSS H9 VSS H10 VSS J3 VSS J6 VSS J7 VSS J8 VSS J9 VSS J10 VSS K6 VSS K7 VSS K8 VSS K9 VSS K10 VSS M3 BAT_N B12 SUBS R3 NC G2 NC P4 REB C11 CSB A10 WEB N7 A0 C9 A1 P12 A2 R12 A3 N11 A4 P11 A5 R11 A6 N10 A7 P10 A8 P7 A9 R7 A10 N6 A11 P6 A12 R6 A13 N5 A14 P5 A15 R5 A16 P9 A17 R10 A18 N9 D0 B11 D1 C10 D2 A9 D3 B8 D4 B7 D5 C6 D6 A6 D7 B5 D8 A11 D9 B10 D10 C8 D11 C7 D12 A7 D13 B6 D14 C5 D15 A5 A19 P8 A20 N12 FLASH_RP R9 SPK_A_N E2 SPK_A_P E1 SPK_B_N D2 SPK_B_P D1 MIC_A_P C2 MIC_A_N C1 MIC_B_P B2 MIC_B_N B1 MIC_BIAS B3 AU_REF E3 RST G13 TESET_EN G14 LO_REF P3 AIO0 R4 AIO1 N3 UART_CTS P15 UART_RTS R15 UART_RX N14 UART_TX N15 USB_DN P13 USB_DP P14 SPI_CLK E14 SPI_CSB E15 SPI_MOSI E13 SPI_MISO D15 PCM_CLK F13 PCM_SYNC F14 PCM_IN G15 PCM_OUT F15 PIO0 F1 PIO1 F2 PIO2 G3 PIO3 F3 PIO4 H13 PIO5 H14 PIO6 H15 PIO7 J13 PIO8 J14 PIO9 M14 PIO10 M13 PIO11 L14 PIO12 K13 PIO13 K14 PIO14 J15 PIO15 M15 LED0 D13 LED1 D14 XTAL_IN R1 XTAL_OUT R2 VDD_USB R14 VDD_PADS L15 VDD_MEM A4 VDD_MEM A8 VDD_MEM B9 VDD_MEM R8 VDD_MEM R13 VDD_PIO G1 VDD_AUDIO A2 VREGIN_AUDIO A3 VREGOUT_H B15 VREGIN_H A15 VREGENABLE_H B14 BAT_P B13 VDD_CHG A12 VDD_SMP_CORE A14 LX A13 VREGIN_L N2 VREGENABLE_L M2 VDD_ANA P1 VDD_CORE C15 VDD_CORE K15 VDD_RADIO M1 VDD_LO N1 U1 BC5 MM EXTERNAL X116MHz/10ppm C10 6p8F/16V/C0G C11 20pF/16V/C0G PCM_CLKPCM_OUTPCM_INPCM_SYNCSPI_CLKSPI_MISOSPI_MOSISPI_CSBUART_CTSUART_TXUART_RTSUART_RXUSB_DPUSB_DNAIO0AIO1PIO0PIO1PIO2PIO3PIO4PIO5PIO6PIO7PIO8PIO9PIO10PIO11PIO12PIO13PIO14PIO15 REB G1 CSB F1 WEB A4 A0 E1 A1 D1 A2 C1 A3 A1 A4 B1 A5 D2 A6 C2 A7 A2 A8 B5 A9 A5 A10 C5 A11 D5 A12 B6 A13 A6 A14 C6 A15 D6 A16 E6 A17 B2 A18 C3 D0 E2 D1 H2 D2 E3 D3 H3 D4 H4 D5 E4 D6 H5 D7 E5 D8 F2 D9 G2 D10 F3 D11 G3 D12 F4 D13 G5 D14 F5 D15 G6 VCC G4 BYTEB F6 RPB B4 NC B3 NC D3 NC C4 R/BB A3 NC D4 VSS H1 VSS H6 U3S29AL008D +3V3 SPK_A_N SPK_A_P SPK_B_P SPK_B_N C14 47nF/16V/X7R +3V3 +3V3 +3V3 +3V3 +1V8 +1V5_A C8 10nF/16V/X7R C7 2u2F/10V/X5R R3 2R2 +3V3 +1V5 C3 10nF/16V/X7R +1V8 C1 47pF/16V/C0G C2 2u2F/10V/X5R R2 2R2 +3V3 C9 10nF/16V/X7R +3V3 C20 10nF/16V/X7R C13 47nF/16V/X7R +3V3 RF_IO 1 2 TP1 L2 22nH/5% C12 47pF/16V/C0G +1V5 RF_IO UNB 1 DC 2 NC 3 BAL 4 GND 5 BAL 6 GND 7 GND 8 U2 DBF81F107 MIC_A_P MIC_A_N MIC_B_N MIC_B_P MIC_A_N 1 MIC_A_P 2 MIC_B_N 3 MIC_B_P 4 MIC_BIAS 5 AIO0 6 AIO1 7 +1V8 8 +3V3 9 UART_RX 10 UART_RTS 11 UART_TX 12 UART_CTS 13 GND 14 USB_DP 15 USB_DN 16 PCM_CLK 17 PCM_IN 18 PCM_SYNC 19 PCM_OUT 20 PIO9 21 PIO6 22 VCHG 23 PIO5 24 GND 25 SPI_MISO 26 SPI_CSB 27 SPI_CLK 28 SPI_MOSI 29 PIO12 30 PIO4 31 PIO11 32 PIO10 33 NC 34 VBAT 35 GND 36 RF_IO 37 GND 38 GND 39 PIO2 40 PIO3 41 PIO0 42 PIO1 43 SPK_B_N 44 SPK_B_P 45 SPK_A_N 46 SPK_A_P 47 AGND 48 J1 BTM_51_V01B GNDGNDGND GND PIO4 PIO3PIO9 PIO12PIO11 UART_CTSUART_RTSUART_RXUART_TX USB_DNUSB_DP RF_IOSPI_CLKSPI_CSBSPI_MISOSPI_MOSI PCM_CLKPCM_IN PCM_OUT PCM_SYNC +3V3MIC_BIASAIO1MIC_A_PMIC_A_NMIC_B_PMIC_B_N SPK_A_NSPK_A_PSPK_B_NSPK_B_P LED0LED1 CS 1 SO 2 WP 3 GND 4 SI 5 SCK 6 HOLD 7 VCC 8 U4AT26DF081A PIO3PIO2 PIO0PIO1 R52K2 R6 2K2 R42K2 R12K2 +3V3 +3V3 +3V3 +3V3 +3V3 +3V3 +3V3 C5 10nF/16V/X7R C6 2u2F/10V/X5R VBAT ADDR0 ADDR1 ADDR2 ADDR3 ADDR4 ADDR5 ADDR6 ADDR7 ADDR8 ADDR9 ADDR10 ADDR11 ADDR12 ADDR13 ADDR14 ADDR15 ADDR16 ADDR17 ADDR18 ADDR19 ADDR19 DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15 R7 0R MIC_BIAS L1 22uH +1V8 C4 4u7F/10V/X5R PIO0PIO1PIO2 PIO10 R8 1K R9 1K SPK_A_N SPK_A_P SPK_B_N SPK_B_P AIO0+1V8 PIO5PIO6 VBAT GND VCHG VCHG R10 0R +3V3

ITL Page 1 of 68 Report No.: 12082468 TEST REPORT Applicant: Jam Industries Ltd. Address of Applicant: 21000 Trans canada Highway, Baie D’Urfe, Quebec, Canada Manufacturer: Jam Industries Ltd. Address of Manufacturer: 21000 Trans canada Highway, Baie D’Urfe, Quebec, Canada Product name: Bluetooth Speakers Model: Brighton WBT50, BT5M, W200B Rating(s): 110-120V~ 60Hz 120W 230-240V~ 50Hz 120W Trademark: Sinclair Audio , Precision Acoustics, Ultimate Standards: FCC Part 15.247 :2010 RSS-210 issue 8 FCC ID: PQA-2YESL001 IC ID: 7430A-2YESL001 Data of Receipt: 2012-08-26 Date of Test: 2012-08-27~2012-09-03 Date of Issue: 2012-09-06 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Sep.06.2012 Jumy Qiu Sep.06.2012 Pauler Li Project Engineer Project Engineer Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 68 Report No.: 12082468 Possible test case verdicts: test case does not apply to the test object ..: N/A test object does meet the requirement ........: P (Pass) test object does not meet the requirement ..: F (Fail) Testing Laboratory information: Testing Laboratory Name .......... : I-Test Laboratory Address : 1-2 floor, South Block, Building A2 , No 3 Keyan Lu, Science City, Guangzhou, Guangdong Province, P.R. China Testing location : Same as above Tel : 0086-20-32209330 Fax : 0086-20-62824387 E-mail : [email protected] General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: The applied models include Brighton WBT50, BT5M and W200B, All models are the same except enclosure. The tests are carried out on model Brighton WBT50 ITL Page 3 of 68 Report No.: 12082468 1 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PA SS Occupied Bandwidth (99% and -20dB) FCC PART 15 C section 15.247 (a)(1); RSS 210 A8.1 (1) ANSI C63.10: Clause 6.9 & DA 00-705 PA SS Carrier Frequencies Separated FCC PART 15 C section 15.247(a)(1); RSS 210 A8.1 (1) DA 00-705 PA SS Hopping Channel Number FCC PART 15 C section 15.247(a)(1)(iii) RSS 210A8.1 (4) DA 00-705 PA SS Dwell Time FCC PART 15 C section 15.247(a)(1)(iii); RSS 210 A8.1 (4) DA 00-705 PA SS Pseudorandom Frequency Hopping Sequence FCC PART 15 C section 15.247(a)(1); RSS 210A8.1 (1) DA 00-705 PA SS Maximum Peak Output Powe r FCC PART 15 C section 15.247(b)(1); RSS 210 A8.4 (2) ANSI C63.10: Clause 6.10 & DA 00-705 PA SS Conducted Spurious Emission (30 MHz to 25 GHz) FCC PART 15 C section 15.247(d); RSS 210 A8.5 ANSI C63.10: Clause 6.7 & DA 00-705 PA SS Radiated Spurious Emission (9 kHz to 25 GHz) FCC PART 15 C section 15.247(d); RSS 210 A8.5 ANSI C63.10: Clause 6.4, 6.5 and 6.6 & DA 00-705 PA SS Band Edges Measurement FCC PART 15 C section 15.247 (d) &15.205 ANSI C63.10: Clause 6.9 & DA 00-705 PA SS Conducted Emissions at Mains Terminals FCC PART 15 C section 15.207; RSS GEN Table 2 ANSI C63.10: Clause 6.2 & DA 00-705 PA SS Remark: N/A: not applicable. Refer to the relative section for the details. EUT: In this whole report EUT means Equipment Under Test. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radio Frequency. ANSI C63.10: the detail version is ANSI C63.10:2009 in the whole report. DA 00-705: “Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems” ITL Page 4 of 68 Report No.: 12082468 2 Contents Page TEST REPORT....................................................................................................................................................................... 1 1 TEST SUMMARY......................................................................................................................................................... 3 2 CONTENTS................................................................................................................................................................... 4 3 GENERAL INFORMATION........................................................................................................................................ 5 3.1 CLIENT INFORMATION............................................................................................................................................ 5 3.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 3.3 DETAILS OF E.U.T................................................................................................................................................. 5 3.4 DESCRIPTION OF SUPPORT UNITS........................................................................................................................ 5 3.5 TEST LOCATION..................................................................................................................................................... 6 3.6 DEVIATION FROM STANDARDS.............................................................................................................................. 6 3.7 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................................. 6 3.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER......................................................…

Text truncated - open the document above for the full version.