PQN68124RX2G4BLACK WIDOW

         
   
           随附 � 个锂聚合物电池和 � 个 AAA (R��) 电池   e THE ANALOG STICK GIVES YOU PROPORTIONAL CONTROL. f LE JOYSTICK ANALOGIQUE VOUS PERMET DE CONTRÔLER LE JOUET DE FAÇON PROPORTIONNELLE. E LA PALANCA ANALÓGICA TE OFRECE UN CONTROL PROPORCIONAL. d MIT DEM ANALOG-STICK KANNST DU PROPORTIONAL STEUERN. i LA LEVETTA ANALOGICA OFFRE UN CONTROLLO PROPORZIONALE. z 您可以通过模拟控制摇杆按比例进行控制。 1. e Turn on the remote by pressing one of the triggers on top. A light will blink when activated. f Allumer la radiocommande en appuyant sur l'une des gâchettes situées sur le dessus. Un voyant clignote pour indiquer qu'elle est allumée. E Enciende el control remoto presionando uno de los activadores que hay en la parte superior. Una luz parpadeará cuando se active. d Schalte die Fernbedienung ein, indem du einen der Auslöser auf der Oberseite drückst. Eine Lampe blinkt, wenn sie aktiviert ist. i Accendi il radiocomando premendo uno dei grilletti sulla parte superiore. Quando è attivo, una spia lampeggia. z 按下顶部任一触发器打开遥控器。激活后，灯光将闪烁。 2. e Turn on the Black Widow™ by pressing and holding the power button on the bottom. A light will blink quickly when ready to pair. f Allumer la Black Widow™ en appuyant sur le bouton d'alimentation situé en dessous et en le maintenant enfoncé. Un voyant clignote rapidement pour indiquer qu'elle est prête pour l'appariement. E Enciende la Black Widow™ manteniendo presionado el botón de encendido de la parte inferior. Una luz parpadeará rápidamente cuando el dispositivo esté listo para emparejarse. d Schalte die Black Widow™ ein, indem du den Ein-/Aus-Schalter auf der Unterseite drückst. Eine schnell blinkende Lampe zeigt die Kopplungsbereitschaft an. i Accendi Black Widow™ tenendo premuto il pulsante di accensione sulla parte inferiore. Quando è pronta per eseguire l'associazione, una spia lampeggia rapidamente. z 按住底部电源按钮，开启黑寡妇蜘蛛™。准备配对时，灯光 将快速闪烁。 3. e When the remote is paired, all lights will be solid. f Lorsque la radiocommande est appariée, tous les voyants restent allumés. E Cuando el control remoto esté emparejado, todas las luces permanecerán jas. d Wenn die Fernbedienung gekoppelt ist, leuchten alle Lampen durchgehend. i Una volta associato il radiocomando, tutte le spie saranno sse. z 遥控器配对成功后，所有灯光将常亮。 HOW TO PAIR REMOTE / COMMENT APPARIER LA RADIOCOMMANDE CÓMO EMPAREJAR EL CONTROL REMOTO / KOPPELN DER FERNBEDIENUNG ASSOCIAZIONE DEL RADIOCOMANDO 如何配对遥控器 3x AAA/R03 1.5V e SOUNDS f SONS E SONIDOS d GERÄUSCHE i SUONI z 声音 e LIGHTS f LUMIÈRES E LUCES d LICHTER i LUCI z 灯光 e OPEN DOOR TO INSTALL & REMOVE BATTERIES. f OUVRIR LE COMPARTIMENT POUR INSTALLER ET RETIRER LES PILES. E ABRE EL COMPARTIMENTO PARA INSTALAR Y RETIRAR LAS PILAS. d ZUM EINLEGEN UND ENTFERNEN DER BATTERIEN DIE KLAPPE ÖFFNEN. i APRI LO SPORTELLO PER INSTALLARE E RIMUOVERE LE PILE. z 打开电池盖，安装和拆卸电池。 TO GO SLOW, MOVE THE ANALOG STICK PART OF THE WAY IN ANY DIRECTION. / POUR AVANCER LENTEMENT, DÉPLACER LÉGÈREMENT LE JOYSTICK ANALOGIQUE DANS N'IMPORTE QUELLE DIRECTION. / PARA REDUCIR LA VELOCIDAD, MUEVE LA PALANCA ANALÓGICA UN POCO EN CUALQUIER DIRECCIÓN. / FÜR LANGSAME BEWEGUNGEN DEN ANALOG-STICK NUR EIN STÜCK WEIT IN DIE GEWÜNSCHTE RICHTUNG BEWEGEN. / PER AVANZARE LENTAMENTE, SPOSTA PARZIALMENTE LA LEVETTA ANALOGICA IN UNA DIREZIONE QUALSIASI. 如要缓慢移动，可向任意方向稍微推动 模拟控制摇杆。 TO GO FAST, MOVE THE ANALOG STICK ALL THE WAY IN ANY DIRECTION. / POUR AVANCER RAPIDEMENT, DÉPLACER À FOND LE JOYSTICK ANALOGIQUE DANS N'IMPORTE QUELLE DIRECTION. PARA AUMENTAR LA VELOCIDAD, MUEVE LA PALANCA ANALÓGICA HASTA EL MÁXIMO EN CUALQUIER DIRECCIÓN. / FÜR SCHNELLE BEWEGUNGEN DEN ANALOG-STICK GANZ IN DIE GEWÜNSCHTE RICHTUNG BEWEGEN. / PER AVANZARE VELOCEMENTE, SPOSTA COMPLETAMENTE LA LEVETTA ANALOGICA IN UNA DIREZIONE QUALSIASI. 如要快速移动，可向任意方向将模拟控制 摇杆推到底。 e After the Black Widow™ is inactive for 2 minutes, it’ll turn off. After 2 minutes of inactivity or holding the right trigger for over 2 seconds, the remote will turn off. To play, turn on the remote with the triggers and then Black Widow™ with the power button. f Si la Black Widow™ reste inactive pendant 2 minutes, elle s'éteint. La radiocommande s'éteint au bout de 2 minutes d'inactivité ou si la gâchette droite est maintenue enfoncée pendant plus de 2 secondes. Pour jouer, allumer la radiocommande avec les gâchettes, puis la Black Widow™ à l'aide du bouton d'alimentation. E Si la Black Widow™ está inactiva durante dos minutos, se apagará. El control remoto se apagará tras 2 minutos de inactividad o si se presiona el activador derecho durante más de 2 segundos. Para jugar, enciende el control remoto con los activadores y la Black Widow™ con el botón de encendido. d Wenn die Black Widow™ 2 Minuten lang inaktiv ist, schaltet sie sich aus. Nach 2 Minuten Inaktivität oder wenn der rechte Auslöser länger als 2 Sekunden gedrückt wird, schaltet sich die Fernbedienung aus. Schalte zum Spielen die Fernbedienung mit den Auslösern und dann die Black Widow™ mit dem Ein-/Aus-Schalter ein. i Quando Black Widow™ rimane inattiva per 2 minuti, si spegne. Dopo 2 minuti di inattività, o tenendo premuto il grilletto destro per più di 2 secondi, il radiocomando si spegne. Per giocare, accendi il radiocomando tramite i grilletti e poi Black Window™ tramite il pulsante di accensione. z 黑寡妇蜘蛛™ 若 � 分钟未活动，遥控器将自动关闭。� 分 钟未活动或持续按住右侧触发器超过 � 秒，遥控器将关闭。如 果想要开始玩耍，请使用触发器打开遥控器，然后按下电源按 钮开启黑寡妇蜘蛛™。 e 360° DEGREE ROTATION f ROTATION À 360 ° E ROTACIÓN DE 360º d 360-GRAD-DREHUNG i ROTAZIONE DI 360 GRADI z ��� 度旋转  ™       ™  ™  ™ ™…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Spin Master Toys Far East Ltd. Address Room 1113, 11/F., Chinachem Golden Plaza, 77 Mody Road, Tsim Sha Tsui East, Kowloon Hong Kong Grantee Code PQN FCC ID PQN68124RX2G4 Authorized Contact Name Tommy So Contact Email [email protected] Contact Phone 852-2301-3822 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Spin Master Toys Far East Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Spin Master Toys Far East Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 03/14/2023 Print Name: Tommy So Title: Senior Quality Manager Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 2 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 03/14/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Spin Master Toys Far East Ltd. Company Name: Spin Master INC Grantee Code: PQN FRN:0033559402 Contact Name: Tommy So Contact Name: Natalia Harrison Address: Room 1113, 11/F., Chinachem Golden Plaza, 77 Mody Road, Tsim Sha Tsui East Address: 5880 Jefferson Blvd A, Los Angeles, CALIFORNIA, 90016, USA City/Province/Zip: Kowloon Hong Kong City/Province/Zip: Los Angeles, CALIFORNIA Telephone: 852-2301-3822 Telephone: +1 (929) 3646709 Fax: 852-2301-1820 Fax: Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: PQN68124RX2G4 ATTN: Director of Certification: We, <Spin Master Toys Far East Ltd.> and < Spin Master INC > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, <Spin Master Toys Far East Ltd.> and < Spin Master INC > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Tommy So Name (Printed): Natalia Harrison Title: Senior Quality Manager Title: Director, Quality Assurance Signature: Signature: Natalia Harrison

Spin Master Toys Far East Ltd. Date: 03/14/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PQN68124RX2G4 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Spin Master Toys Far East Ltd. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Tommy So Title: Senior Quality Manager Signature: On behalf of Company: Spin Master Toys Far East Ltd. Telephone: 852-2301-3822 E-mail: [email protected]

Spin Master Toys Far East Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: PQN68124RX2G4 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Tommy So Title: Senior Quality Manager Signature: On behalf of Company: Spin Master Toys Far East Ltd. Telephone: 852-2301-3822 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2303000587ET (receiver) FCC ID: PQN68124RX2G4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

YMMDD#HO pad prin�ng PMS Black 6c Engraving FCC ID:PQN68124 RX2G4 MODEL: 68124RX IC:4438B-68124 RX2G4 YMMDD#HO FCC ID: PQN68124TX2G4 IC: 4438B-68124TX2G4 MODEL:68124TX CHINA YMMDD#HO

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 4 Appendix Internal Photos for SZCR2303000587ET (receiver) FCC ID: PQN68124RX2G4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058704 Page: 1 of 10 Keny Xu EMC Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SZCR2303000587ET (SGS SZ NO.: T52310250100EM) Applicant: Spin Master Toys Far East Ltd. Address of Applicant: Room 1113, 11/F., Chinachem Golden Plaza, 77 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: HEX MCH HEX BLACK WIDOW EN GML4PKSLD Brand Name: HEX BUGS Item No.: 68124RX Phantom No.: 20145187 Family No.: 68124RX Sales Planning: 6068912 Finished Goods No.: 1089061 Country of Origin: CHINA Country of Destination: US FCC ID: PQN68124RX2G4 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt : 2023-03-07 Date of Test : 2023-03-11 to 2023-04-04 Date of Issue: 2023-04-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058704 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2023-04-06 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058704 Page: 3 of 10 2 Contents Page 1 Cover Page .................................................................................................................................. 1 2 Contents ...................................................................................................................................... 3 3 General Information..................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................ 4 3.2 Details of E.U.T. .................................................................................................................... 4 3.3 Separation Distance .............................................................................................................. 4 3.4 Test Location ........................................................................................................................ 5 3.5 Test Facility ........................................................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ......................................................................... 6 4.1 Blanket 1 mW Blanket Exemption .......................................................................................... 6 4.2 MPE-based Exemption .......................................................................................................... 6 4.3 SAR-based Exemption .......................................................................................................... 7 5 Measurement and Calculation .................................................................................................. 10 5.1 Maximum transmit power .................................................................................................... 10 5.2 RF Exposure Calculation ..................................................................................................... 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058704 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Rechargeable battery DC3.7V 100mAh for receiver Cable(s): USB cable:20cm unshielded Operation Frequency: 2416MHz-2466MHz Modulation Type: GFSK Number of Channels: 20 Antenna Type: PCB Antenna Antenna Gain: -16.2dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058704 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1336. Test Firm Registration Number: 787754.…

Text truncated - open the document above for the full version.

Tester :Zhou Yingjie Approval : Chen Guoqiang Date : 2023 / 07 / 19 Antenna Test Report 真诚 务实 开拓 创新 Contents: 1. Device Profile 2. Antenna Performance Test 3. Antenna Passive Test 4.Assembly Picture Dongguan Yijia Electronic Communication Technology Co., Ltd Address:No.59,MuYu Rd,ShaTou,ChangAnTown, DongGuan 523861 China Device 1. Device Profile Agilent E5071B S Parameter Test // Antenna 2. Antenna Performance Test 3. Antenna Passive Test Z Y X Y X Z Passive Test For Antenna Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 15002.1 -16.7 -12.4 15102.1 -16.7 -12.5 15202.2 -16.5 -11.4 15302.3 -16.5 -11.7 15402.1 -16.8 -12.8 15502.0 -16.9 -12.2 15601.9 -17.1 -12.5 15701.9 -17.3 -12.4 15802.2 -16.6 -11.4 15901.8 -17.4 -12.9 16001.8 -17.4 -12.8 16101.9 -17.2 -12.4 16201.9 -17.2 -12.4 16302.0 -17.1 -12.3 16402.0 -16.9 -12.3 Passive Test For Antenna Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 16502.1 -16.8 -12.0 16602.1 -16.8 -11.9 16702.1 -16.7 -11.9 16802.2 -16.6 -11.8 16902.2 -16.5 -11.8 17002.2 -16.5 -11.8 17102.3 -16.4 -11.4 17202.3 -16.4 -11.5 17302.3 -16.5 -11.5 17402.2 -16.6 -11.9 17502.2 -16.5 -11.4 17602.1 -16.8 -12.1 17701.9 -17.3 -13.2 17801.7 -17.6 -13.9 17901.6 -17.9 -13.9 18001.6 -17.9 -13.7 Passive Test For Antenna Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 23500.7 -21.6 -16.6 23600.7 -21.6 -16.7 23700.7 -21.6 -16.5 23800.7 -21.7 -16.3 23900.7 -21.9 -16.3 24000.7 -21.6 -16.2 24100.6 -22.0 -16.5 24200.6 -22.6 -17.2 24300.5 -22.8 -17.2 24400.6 -22.6 -17.2 24500.6 -21.9 -16.5 24600.6 -22.1 -17.0 Passive Test For Antenna Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 24700.6 -22.3 -16.8 24800.6 -22.3 -16.8 24900.6 -22.2 -16.7 25000.6 -22.3 -16.8 25100.7 -21.9 -16.6 25200.6 -21.9 -16.7 25300.6 -21.9 -16.8 25400.6 -22.0 -16.9 25500.7 -21.5 -16.5 25600.7 -21.4 -16.5 25700.7 -21.6 -16.5 25800.7 -21.7 -17.0 Radiation Pattern For Antenna(1500MHz) Radiation Pattern For Antenna(1600MHz) Radiation Pattern For Antenna(1800MHz) Radiation Pattern For Antenna(2400MHz) Radiation Pattern For Antenna(2440MHz) Radiation Pattern For Antenna(2480MHz) Radiation Pattern For Antenna(1.5-1.8G) Phi 0° Phi 90° Theta 90° Radiation Pattern For Antenna(2.35-2.58G) Phi 0° Phi 90° Theta 90° 4. Assembly Picture Antenna

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058703 Page: 1 of 40 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2303000587ET (SGS SZ NO.: T52310250100EM) Applicant: Spin Master Toys Far East Ltd. Address of Applicant: Room 1113, 11/F., Chinachem Golden Plaza, 77 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: HEX MCH HEX BLACK WIDOW EN GML4PKSLD Brand Name: HEX BUGS Item No.: 68124RX Phantom No.: 20145187 Family No.: 68124RX Sales Planning: 6068912 Finished Goods No.: 1089061 Country of Origin: CHINA Country of Destination: US FCC ID: PQN68124RX2G4 Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2023-03-07 Date of Test: 2023-03-11 to 2023-04-04 Date of Issue: 2023-04-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058703 Page: 2 of 40 Revision Record Version Chapter Date Modifier Remark 01 2023-04-06 Original Authorized for issue by: Martin Tang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058703 Page: 3 of 40 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300058703 Page: 4 of 40 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................10 6.1 Antenna Requirement .................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 Radio Spectrum Matter Test Results ................................................................................................11 7.1 20dB Bandwidth ..........................................................................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................11 7.1.4 Measurement Procedure and Data .........................................................................................11 7.2 Field Strength of the Fundamental Signal (15.249(a)) ..................................................................14 7.2.1 E.U.T. Operation .....................................................................................................................14 7.2.2 Test Mode Description ............................................................................................................14 7.2.3 Test Setup Diagram ............…

Text truncated - open the document above for the full version.