PRDMS3PRESENTOptical Presenter Mouse

Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in particular installations If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : 1. Reorient / Relocate the receiving antenna. 2. Increase the distance between the mouse and receiver. 3. Connect the equipment into an outlet on a circuit different from that the receiver is connected. 4. Consult the dealer or an experienced radio /TV technician for help 3-in-1 Professional Presenter Mouse OWNER'S GUIDE Ver.1.0 CAUTION: To use this product properly, please read the user's guide before installation CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment Please DO NOT direct the laser beam at anyone’s eye. 1 Welcome Thank you for choosing 3-in-1 Professional Presenter Mouse. This devices can offer 3-in-1 solution including a RF laser presenter, a handy trackball and a cordless laser mouse. It gives you remove control of your onscreen presentation with up to arrange of 10 meters. Never worry about dead batteries with a rechargeable cradle. It’s an ideal solution for making wireless presentations in professionalizing! Package Contents Presenter Mouse Rapid Charge Base Station Two AA Rechargeable Batteries User’s Guide Minimum System Requirements IBM or PC Compatible Windows 98, 2000, ME, XP Functional Introduction Left-Button Scroll Ball Middle - Button Right - Button Switch Button Scroll Ball / Track Ball Battery Cover Laser Beam Control Button Left-Button LED / Low Power Indicator Channel Reset Button Power On/Off Laser Bean Directives Optical LED 2 Receiver Hardware Installation Installing the Batteries Open the batter cover and insert the 2 *AA batteries following the polarity instructions as shown in the battery chamber. Battery Charging Point Channel Reset Button 3 USB Port Connect to the USB or Mouse port of your computer Installing the Charger and the Receiver The receiver (charger) is connected to your computer via a cable. It needs to plug into your computer by a USB port or a mouse port. For USB port installation Windows 98 (or higher) is required for USB port installation. Connect the receiver cable to the USB port on the computer. For Windows, you may be prompted to insert the Windows software CD. Insert the driver’s CD into the computer’s CD-ROM driver when ask to do so. Follow the instructions steps. This RF Presenter Mouse is a plug-and-play device. Normally, it’s not necessary to setup the RF Channel. But if some interference happens, then you must setup the connection RF Channel. Setup the connection RF Channel between the Mouse and the Receiver Receiver Presenter Mouse Push the channel reset button on themouse. Push the channel reset button on thereceiver If the cursor does not move after 30 seonds, please do the steps above. 4 Using the Presenter Mouse Laser Pointer Press/Not Press the Laser Bean Control Button to control Laser Bean On/Off. The operation range is up to 10 meters. How to use the 8D Scroll Ball You can control the Windows Scroll Bar horizontally and vertically through scroll the roll the Scroll Ball toward the direction you want directly. And simply click (press down) the Scroll Ball like you would wish a standard mouse button. There is no need to move your mouse. It is especially convenient for making presentation or viewing websites. In order to use this function properly, please make sure your presenter mouse is on 8D Scroll Ball mode. The operation range is up to 5 meters. Switching between 8D Scroll Ball and Track Ball You can switch the Scroll Ball to Track Ball via Switch Button. Please click the Switch Button to switch between 8D Scroll Ball and Track Ball. When your presenter mouse is on the Track Ball mode, the Optical LED is on. It can help you to quickly check what mode of your presenter mouse is on. To Scroll, you can scroll the scroll ball tower the direction you want directly To use the scroll ball like a standard mouse Button, click (press down) the ball. 5 Recharging Troubleshooting A. Presenter Mouse does not work upon installation. Try one or more of the following: y For optimal performance, place adjust the angle of the receiver to find the best performance. y Make sure you have installed the batteries correctly. y Press the “Channel Reset” button on the receiver, and then press the “Channel Reset” button on the mouse. y Make sure you have installed the Driver correctly. y Make sure the receiver cable is plugged in the right mouse port or USB port. y Unplug the receiver and then plug in the receiver again. Make sure that it had been detected by the Operating Systems properly. y Make sure your mouse port has the proper configuration. Refer to your computer documentation for the correct port configuration. B. Presenter Mouse not detected. When using the mouse, it may not be detected by the computer or receiver. To remedy this problem, try the following y Make sure the receiver is plugged in the right mouse port or USB port. y Make sure …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4 Page 5 Page 6

FCC ID: PRDMS3PRESENT Report No.: RF960507L09 Operational Description The transmitter of the EUT (Optical Presentor Mouse) is powered from 2.4Vdc batteries. The antenna is Loop antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF960507L09 1 Report Format Version 2.0.5 FCC TEST REPORT REPORT NO.: RF960507L09 MODEL NO.: MS3 (Transmitter) MRA (Receiver) RECEIVED: May 15, 2007 TESTED: May 16, 2007 ISSUED: May 23, 2007 APPLICANT: Acrox Technologies Co., Ltd ADDRESS: 8F, No. 437, Rui Guang RD., Nei Hu Dist., Taipei 114, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 16 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960507L09 2 Report Format Version 2.0.5 Table of Contents 1 CERTIFICATION.......................................................................................................3 2 SUMMARY OF TEST RESULTS...............................................................................4 2.1 MEASUREMENT UNCERTAINTY.............................................................................4 3 GENERAL INFORMATION........................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..........................................................................5 3.1 DESCRIPTION OF TEST MODES............................................................................6 3.1.1 CONFIGURATION OF SYSTEM UNDER TEST.......................................................6 3.1.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.............................6 3.2 GENERAL DESCRIPTION OF APPLIED STANDARDS............................................7 3.3 DESCRIPTION OF SUPPORT UNITS.......................................................................7 4 TEST PROCEDURE AND RESULT...........................................................................8 4.1 RADIATED EMISSION MEASUREMENT..................................................................8 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................8 4.1.2 TEST INSTRUMENT.................................................................................................9 4.1.3 TEST PROCEDURE...............................................................................................10 4.1.4 TEST SETUP..........................................................................................................11 4.1.5 EUT OPERATING CONDITION...............................................................................11 4.1.6 TEST RESULTS......................................................................................................12 5 PHOTOGRAPHS OF THE TEST CONFIGURATION...............................................14 6 INFORMATION ON THE TESTING LABORATORIES.............................................15 APPENDIX-A ....................................................................................................................A-1 Report No.: RF960507L09 3 Report Format Version 2.0.5 1 CERTIFICATION PRODUCT: Optical Presentor Mouse MODEL: MS3 (Transmitter) MRA (Receiver) BRAND: ACROX APPLICANT: Acrox Technologies Co., Ltd TESTED: May 16, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.227), ANSI C63.4-2003 The above equipment (model: MS3) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 23, 2007 Joanna Wang TECHNICAL ACCEPTANCE : , DATE: May 23, 2007 Responsible for RF Long Chen APPROVED BY : , DATE: May 23, 2007 Gary Chang / Supervisor Report No.: RF960507L09 4 Report Format Version 2.0.5 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission NA Power supply is 2.4Vdc from batteries 15.227 15.209 Radiated Emission Test PASS Meet the requirement of limit. Minimum passing margin is –2.45dB at 134.89MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Measurement Frequency Uncertainty Conducted emissions 9kHz~30MHz 2.44 dB 30MHz ~ 200MHz 3.59 dB Radiated emissions 200MHz ~1000MHz 3.61 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF960507L09 5 Report Format Version 2.0.5 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Optical Presentor Mouse MS3 (Transmitter) MODEL NO. MRA (Receiver) FCC ID PRDMS3PRESENT POWER SUPPLY 2.4Vdc form rechargeable batteries (1.2Vdc x 2) for transmitter 5Vdc from host equipment for receiver MODULATION TYPE FSK CARRIER FREQUENCY OF EACH CHANNEL 27.045MHz NUMBER OF CHANNEL 1 ANTENNA TYPE Loop antenna DATA CABLE 1.5m shielded USB cable without core I/O PORTS USB for receiver ACCESSORY DEVICE NA NOTE: 1. The following model names were provided to this EUT. MODEL REMARK MS3 transmitter MRA receiver 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF960507L09 6 Report Format Version 2.0.5 3.1 DESCRIPTION OF TEST MODES The EUT only has one channel. TRANSMITTER CHANNEL FREQUENCY (MHz) 1 27.045 3.1.1 CONFIGURATION O…

Text truncated - open the document above for the full version.

Att 0 dB * A Ref 97 dBμV Center27.046 MHzSpan1.5 MHz150 kHz/ 1 PK VIEW * RBW 10 kHz * VBW 30 kHz SWT 15 ms * 0 10 20 30 40 50 60 70 80 90 1 Marker 1 [T1 ] 37.74 dBμV 27.046000000 MHz 2 Marker 2 [T1 ] 14.96 dBμV 26.960000000 MHz 3 Marker 3 [T1 ] 14.60 dBμV 27.280000000 MHz F1 F2

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST