PRDMU1155-Button Wireless Mouse

4 Connect via Bluetooth in Mac Turn on the mouse and setting it on either Bluetooth ( ) or Bluetooth ( ). Click on “Apple menu” (top left corner of your screen). Go to System Preferences -> Bluetooth -> Turn Bluetooth on to set up Bluetooth device Follow same steps as Connect via Bluetooth in Windows to set mouse in pairing mode and complete Bluetooth pairing. 65 onn.SMMOUSE or BT5.1 Mouse BT Keyboard October 01, 2022_V1 Model: HOBLK100122461 5-Button Wireless Mouse PRODUCT GUIDE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Federal Communication Commission Interference Statement Walmart Inc., Bentonville, AR 72716 1 BATTERY WARNING STATEMENT Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries. Notes: All parts have to be unpacked and the packaging material has to be removed completely. Before use, verify the package contents are complete and undamaged. Before Use • 5 clickable buttons, scroll wheel, on/off switch and connection switch • 5 adjustable DPI sensitivity levels: 600/1000/1600/2400/3600 DPI • Connect to up to 3 devices simultaneously with Bluetooth® wireless technology or a USB nano receiver • 2 Bluetooth® wireless connection channels • 2.4GHz USB nano receiver (stores in battery compartment when not in use) • USB plug and play • Windows, MacOS, ChromeOS, Android, iOS compatible • 4.85 in L x 3.14 in W x 1.74 in H (12.3 cm x 8 cm x 4.4 cm) System Requirements What’s in the Box * Windows® 7/8/10/11 or later, macOS® 10.5 or later, Android™ Chrome OS™ * Available USB port or Bluetooth® on your laptop or computer 1 Wireless Mouse 1 USB nano receiver 1 AA battery Specification 2 1. 2. 3. Left button Right button Scroll wheel 4. 5. 6. LED indicator USB nano receiver Connect button 7. 8. 9. Battery cover Easy-switch ON / OFF switch 3 2 6 7 8 9 5 4 1 Switch Connection Channel This mouse can connect up to 3 different devices. Use “Easy-switch” to change connection channels between USB nano receiver and 2 other Bluetooth channels. A B C Switch between different devices For example, you can set USB nano receiver ( ) on laptop A Bluetooth ( ) on desktop B Bluetoooth ( ) on tablet C then use “Easy-switch” to switch connection between these 3 computers. Connect button Press and hold this button to set the mouse in Bluetooth pairing mode or to reconnect to a paired device. USB nano receiver Bluetooth 1 Bluetooth 2 Features Connection Setup Connect via USB nano receiver This is plug and play with USB nano receiver. Make sure to turn on power and set connection channel to USB nano receiver ( ). Plug USB nano receiver into an available USB A port on your computer and start surfing onn. Connect via Bluetooth in Windows Turn on the mouse and setting it on either Bluetooth ( ) or Bluetooth ( ). Click on “Start” (bottom left corner on your screen). Go to Settings -> Device -> Bluetooth & other devices -> Turn on Bluetooth -> Add Bluetooth or other device -> Add a device (Bluetooth) Press and HOLD “Connect” button to set mouse in pairing mode (LED will start flashing) Click on “onn.SMMOUSE or BT5.1 Mouse” in the list on your computer to setup pairing. LED will stop flashing and light up for 3 seconds when complete. Insert the battery with the correct position according to the instructions labeled on the mouse. Installing Battery 2 1 AA Battery 3 Need help? We’r e here for you ever y day from 7 a.m. – 9 p.m. CST. Give us a call at 1-888-516-2630 you think. camera and let us know what Scan with your smartphone We ‘d love to hear from you. HOBLK100122461 7 If this LED starts blinking, you need to change battery. Low Battery Battery status LED indicator onn.SMMOUSE or BT5.1 Mouse BT Keyboard 9 Is the mouse powered on? 1. 2. 3. 4. 5. Reconnection Under Bluetooth connection (either Bluetooth 1 or 2 ) mouse can automatically reconnect to its last connected computer. If it fails, you can always re-pair again. Is the mouse powered on? Make sure channel is set to ( or ). Make sure to turn on Bluetooth function on your computer. Check the orientation of the battery inside the mouse. Try a different surface. Remove metallic objects b…

Text truncated - open the document above for the full version.

Acrox Technologies Co., Ltd. 4F., No.89, Minshan St., Neihu Dist., Taipei City Taiwan. Declaration letter Dear Sir, We, _Acrox Technologies Co., Ltd._declare product: _ 5-Button Wireless Mouse _with the model numbers B2I, HOBLK100122461, HOGRN100122461 _, there is no electrical change has been made to the equipment that alters the compliance characteristics. These models are the same except for model number and brand name. Please kindly handle on the project. FCC ID: PRDMU115 Thank you! Sincerely, Signature Gavin Hsieh Product Manager Acrox Technologies Co., Ltd.

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Acrox Technologies Co., Ltd. Address: 4F., No.89, Minshan St., Neihu Dist., Taipei City Taiwan. Product Name: 5-Button Wireless Mouse Model Number: B2I, HOBLK100122461, HOGRN100122461 FCC Identifier: PRDMU115 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Gavin Hsieh Date: 11/15/2022 Title: Product Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Acrox Technologies Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 11/15/2022 Subject: Request for Confidentiality FCC ID: PRDMU115 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Gavin Hsieh Title: Product Manager

FCC ID: PRDMU115 Page 3 of 9 External photos FCC ID: PRDMU115 Page 4 of 9 FCC ID: PRDMU115 Page 5 of 9

Label & Location

FCC ID: PRDMU115 Page 6 of 9 Internal photos FCC ID: PRDMU115 Page 7 of 9 FCC ID: PRDMU115 Page 8 of 9 RF Antenna RF Chip FCC ID: PRDMU115 Page 9 of 9

Dongguan Nore Testing Center Co., Ltd. Report No.: NTC2210115F-1 FCC ID: PRDMU115 RF EXPOSURE EVALUATION EUT Specification EUT 5-Button Wireless Mouse Model Name B2I, HOBLK100122461, HOGRN100122461 Frequency band (Operating) 2.402GHz ~ 2.480GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others(2427-2457MHz) Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power -0.626dBm(0.866mW) Antenna gain 3.09dBi Evaluation applied MPE Evaluation SAR Evaluation Standard Requirement Portable Device According to §15.247(i) and §1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v06, section 4.3.1. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, 16 where ·f(GHz) is the RF channel transmit frequency in GHz ·Power and distance are rounded to the nearest mW and mm before calculation17 ·The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Dongguan Nore Testing Center Co., Ltd. Report No.: NTC2210115F-1 FCC ID: PRDMU115 Measurement Result RF PHY Support: 1Mbps Channel Channel Frequency (MHz) Max Output power (dBm) Tolerance Max Output power (mW) Calculatio n Value (Note 1) Threshold Value Test Mode: GFSK Low 2402 -0.700 ±0.5 0.955 0.2960 3.0 Middle 2440 -1.375 ±0.5 0.818 0.2556 3.0 High 2480 -0.626 ±0.5 0.971 0.3058 3.0 Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example:0.971/5*√2.48=0.3058 ≤ 3.0 According to KDB447498 D01 V06, threshold at which no SAR required is ≤3.0 for 1-g SAR, separation distance is 5mm, and no SAR measurement is required. The SAR measurement is not necessary.

NOTE:ThisdocumentisissuedbyShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,thetestreportshallnotbereproducedexceptin fullwithoutpriorwrittenpermissionofthecompany.Thetestresultsapplyonlytotheparticularsample(s)testedandtothespecifictestscarried outwhichisavailableonrequestforvalidationandinformationconfirmedatourwebsite. MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page1of 13 REPORTNo.：SZ22110064E05 TESTREPORT APPLICANT:AcroxTechnologiesCo.,Ltd PRODUCTNAME:PCBAntenna MODELNAME:Ant-B2I TRADENAME:N/A BRANDNAME:N/A STANDARD(S):IEEEStd149-2021 RECEIPTDATE:2022-11-04 TESTDATE:2022-11-07 ISSUEDATE:2022-11-17 Editedby: : FangJinshan(Rapporteur) Approvedby: : ChiShide(Supervisor) Testedby MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of13 REPORTNo.：SZ22110064E05 DIRECTORY 1.TechnicalInformation ·········································································································3 1.1.ApplicantandManufacturerInformation ······································································3 1.2.EquipmentUnderTest(EUT)Description····································································3 2.TestResults··························································································································4 2.1.AppliedReferenceDocuments·······················································································4 2.2.TestConditions·················································································································4 2.3.MeasurementUncertainty·······························································································4 2.4.TestResults·······················································································································5 2.4.1.Gain····································································································································5 2.4.2.VSWR ·································································································································5 AnnexAPhotographs ············································································································6 AnnexBFigures ······················································································································7 1．2DRadiationPattern ·········································································································7 2．3DRadiationPattern ·········································································································8 3．VSWR·································································································································10 AnnexCPhotographs··········································································································11 AnnexDGeneralInformation······························································································13 1.1IdentificationoftheResponsibleTestingLaboratory··············································13 1.2IdentificationoftheResponsibleTestingLocation··················································13 1.3TestEquipmentsUtilized·······························································································13 ChangeHistory VersionDateReasonforchange 1.02022-11-17Firstedition MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page3of13 REPORTNo.：SZ22110064E05 1.TechnicalInformation Note:Providebymanufacturer. 1.1.ApplicantandManufacturerInformation Applicant:AcroxTechnologiesCo.,Ltd ApplicantAddress:4F.,No.89,MinshanSt.,NeihuDist.,TaipeiCity114,Taiwan,R.O.C Manufacturer:AcroxTechnologiesCo.,Ltd ManufacturerAddress:4F.,No.89,MinshanSt.,NeihuDist.,TaipeiCity114,Taiwan,R.O.C 1.2.EquipmentUnderTest(EUT)Description WirelessType Bluetooth Frequency N/A IMEI N/A AntennaType MeanderPCBantenna SampleNo.5# MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page4of13 REPORTNo.：SZ22110064E05 2.TestResults 2.1.AppliedReferenceDocuments Leadingreferencedocumentsfortesting: No.IdentityDocumentTitle 1 IEEEStd149-2021 IEEERecommendedPracticeforAntenna Measurements 2.2.TestConditions TestEnvironmentConditions ： RelativeHumidity:25...75% Temperature:+10°Cto+30°C 2.3.MeasurementUncertainty Theuncertaintyiscalculatedusingthemethodssuggestedinthe"GuidetotheExpressionof UncertaintyinMeasurement"(GUM)publishedbyISO.Whenthetestresultisacriticalvalue,we willusethemeasurementuncertaintygivethejudgmentresultbasedonthe95%Confidence intervals. ItemMeasurementUncertainty(dB) Gain±0.5 VSWR±0.2 MeasurementUncertainty(95%ConfidenceInterval)K=2 MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page5of13 REPORTNo.：SZ22110064E05 2.4.TestResults 2.4.1. Gain Frequency (MHz) Gain(dBi) 24002.80 2410 2.91 24202.75 2430 2.65 24402.89 2450 3.00 24603.09 2470 2.82 24802.76 2490 2.75 25002.82 2.4.2. VSWR FrequencyVSWR 2400MHz2.16 2440MHz 1.96 2480MHz1.98 MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA…

Text truncated - open the document above for the full version.

Report No.: NTC2210115FV00 Page 2 of 36 Table of Contents 1. Summary of Test Result ...................................................................................................................................... 4 2. General Description of EUT ................................................................................................................................ 5 3. Test Channels and Modes Detail ........................................................................................................................ 8 4. Configuration of EUT ........................................................................................................................................... 8 5. Modification of EUT ............................................................................................................................................. 8 6. Description of Support Device ............................................................................................................................. 9 7. Test Facility and Location ................................................................................................................................. 10 8. Applicable Standards and References .............................................................................................................. 11 9. Deviations and Abnormalities from Standard Conditions ................................................................................. 11 10. Test Conditions ............................................................................................................................................... 12 11. Measurement Uncertainty ............................................................................................................................... 12 12. Sample Calculations ....................................................................................................................................... 13 13. Test Items and Results ................................................................................................................................... 14 13.1 Conducted Emissions Measurement ............................................................................................................ 14 13.2 Maximum Conducted Output Power Measurement ...................................................................................... 16 13.3 6dB Bandwidth Measurement ....................................................................................................................... 18 13.4 Power Spectral Density Measurement ......................................................................................................... 21 13.5 Band Edge and Conducted Spurious Emissions Measurement ................................................................... 24 13.6 Radiated Spurious Emissions and Restricted Bands Measurement ............................................................ 28 13.7 Antenna Requirement ................................................................................................................................... 35 14. Test Equipment List......................................................................................................................................... 36 Report No.: NTC2210115FV00 Page 3 of 36 Revision History Report Number Description Issued Date NTC2210115FV00 Initial Issue 2022-11-18 Report No.: NTC2210115FV00 Page 4 of 36 1. Summary of Test Result FCC Rules Description of Test Result Remarks §15.207 (a) AC Power Conducted Emission N/A See note §15.247(b)(3) Maximum Conducted Output Power PASS --- §15.247(a)(2) 6dB Bandwidth PASS --- §15.247(e) Power Spectral Density PASS --- §15.247(d) Band Edge and Conducted Spurious Emissions PASS --- §15.247(d),§15.209, §15.205 Radi ated Spurious Emissions and Restricted Bands PASS --- §15.203 Antenna Requirement PASS --- Note: AC Power Conducted Emission is not applicable due to the EUT only can be powered by battery. Report No.: NTC2210115FV00 Page 5 of 36 2. General Description of EUT Product Information Product name: 5-Button Wireless Mouse Main Model Name: B2I Additional Model Name: HOBLK100122461, HOGRN100122461 Model Difference: These models have the same circuitry, electrical mechanical, PCB Layout and physical construction. The difference is model name and brand name due to marketing purpose. S/N: 2001A0001 Brand Name: Onn, Acrox Hardware version: V1.0 Software version: V1.0 Rating: DC 1.5V from AA battery Classification: Class B Typical arrangement: Table-top I/O Port: N/A Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional information Note: 1. All the tests performed on model B2I. 2. The product consists of the mouse and Dongle. This report only applies to the mouse. Remark: All the information above are provided by the manufacturer. More detailed feature of the EUT please refers to the user manual. Report No.: NTC2210115FV00 Page 6 of 36 Technical Specification (BLE) Bluetooth Version: V5.1 Frequency Range: 2402-2480MHz Modulation Type: GFSK Number of Channel: 40 (refer to following channel list for details) Channel Space: 2MHz Antenna Type: PCB antenna Antenna Gain: 3.09 dBi (Declared by manufacturer) RF PHY Support: 1Mbps Note: This report only applies to BLE feature of the EUT. Report No.: NTC2210115FV00 Page 7 of 36 Channel List Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 0 2402 14 2430 28 2458 1 2404 15 2432 29 2460 2 2406 16 2434 30 2462 3 2408 17 2436 31 2464 4 2410 18 2438 32 2466 5 2412 19 2440 33 2468 6 2414 20 2442 34 2470 7 2416 21 2444 35 2472 8 2418 22 2446 36 2474 9 2420 23 2448 37 2476 10 2422 24 2450 38 2478 11 2424 25 2452 39 2480 12 2426 26 2454 - - 13 2428 27 2456 - - Report No.: NTC2210115FV00 Page 8 of 36 3. Test Channels and Modes Detail Mode Channel Frequency (MHz) Modulation RF PHY (Mbps) 1 TX Low 0 2402 GFSK 1 2 Mid 19 2440 GFSK 1 3 High 39 2480 GFSK 1 4 Normal -…

Text truncated - open the document above for the full version.

FCC ID: PRDMU115 Page 1 of 9 Test Photo Radiated emission (Below 30MHz) Radiated emission (30-1000MHz) FCC ID: PRDMU115 Page 2 of 9 Radiated emission (Above 1000MHz)