PRDPRERECEI001Presenter Receiver

USER GUIDE 2.4GHz 4 Key Laser Wireless Presenter Features and specifications are subject to change without notice. All trademarks are the property of their respective owners © 2007, Targus Group International, Inc. and Targus, Inc. Manufacturer / Importer: Unit 1202-07, 12/F, Tower 2, Metroplaza, No. 223 Hing Fong Road, Kwai Fong, N.T. Hong Kong AMP08AP / 410-1177-006A TABLE OF CONTENTS Targus 2.4GHz 4 Key Laser Wireless Presenter ...........2 ˧˔˥ ̊˨˦ྤᒵዝᝑᕴփᆜᥲ୴ਐق......................10 ˧˔˥ ̊˨˦㡰优ዝ兄ᕴ㡕ᆜᖿ٠ਐقᕴ..........................18 {ˆ™ŽœšGⱨ㉔GYU[no¡䘸⤼㥔䉤....................................26 ϟΦυϙϧϏΩπυϗϟέλϟηϏυϫϣυϨόϔτπυϨϏσζϨωτπϏτηϫϟηϏυϫϟχϟέϏυϫΤϏΩ 䎷䎤䎵䎪䎸䎶䮳䯃䭽䯃䮤䭫䮺䮆ઃ䮶䭫䮫䮳䮀䮞䮳䮃䮺䮆䯃䎃.............42 1 AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING. CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 2 TARGUS 2.4GHZ 4 KEY LASER WIRELESS PRESENTER Introduction Congratulations on your purchase of the Targus 2.4GHz 4 Key Laser Wireless Presenter. This combination presenter / laser pointer features four control buttons that emulate the command keys in PowerPoint®. It offers true plug-and-play capability, with no need for software drivers, and 2.4GHz RF technology for controlling your presentations up to 50 feet away (15m). Package Contents • Wireless presenter • USB receiver • 1 x AAA battery (Non-rechargeable) • Carrying pouch • User guide System Requirements Hardware • USB port Operating System • Windows® 2000/XP • Windows Vista™ 3 Setting Up Your Wireless Presenter Targus 2.4GHz 4 Key Laser Wireless Presenter Installing the Battery 2. Insert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery housing. Battery Cover 1. Press the battery cover hinge on the bottom of the presenter and open the cover. 3. Close the battery cover back into position until it “clicks” firmly into place. 4 Targus 2.4GHz 4 Key Laser Wireless Presenter Synchronizing Your Wireless Presenter The receiver and presenter should synch up automatically. However, in some cases they may not synchronize properly due to environmental interference or other causes. If this is the case, you must re-establish the link. To do this press and release the connect button on the receiver, then press and release the connect button on the bottom of the presenter. Connect button NOTE: TO TURN THE PRESENTER OFF, SIMPLY PLACE THE USB RECEIVER BACK INTO THE STORAGE SLOT. THIS WILL MAXIMIZE BATTERY LIFE WHEN NOT IN USE. Connecting The Receiver Plug the USB receiver into an open USB port on your computer. Your computer's operating system will identify the receiver and install the default driver. 5 Targus 2.4GHz 4 Key Laser Wireless Presenter (2) (3) (1) (4) 6 Targus 2.4GHz 4 Key Laser Wireless Presenter Using Your Wireless Presenter Page up Laser button Page down Darken screen Laser pointer Safety Measures • To avoid possible eye damage, never point the presenter's laser at people, especially their faces, or look directly into the presenter's laser beam. • Avoid pointing the presenter's laser beam at a mirror or other highly-reflective surface. • Keep the presenter away from young children. • Never view the presenter's laser beam using telescopic devices, such as a microscope or binoculars. • Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. 7 Transmitter Receiver RF • 2406Mhz~2478Mhz Interface • USB 1.1 or later Power • USB Bus Powered 5V DC  RF • 2406Mhz~2478Mhz Laser Pointer • Laser Wavelength: 640nm~665nm • Laser Output Power: < 1mW • Safety: Class II Battery Type • Alkaline battery AAA Effective RF Communication Range • up to 15 meters RF output Power • 1.5mW max Power Consumption • Max 62mA Targus 2.4GHz 4 Key Laser Wireless Presenter  What do I do if the response time of the presenter is slow or it intermittently stops working? • Make sure that the presenter is within 50 feet (15 m) of its receiver. • Increase the distance between the presenter's receiver and the base units of other wireless devices. • Turn off any wireless devices and their base units that are near the presenter's receiver. • Replace the battery. • Synchronize the receiver and presenter. See “Synchronizing Your Wireless Presenter” 8 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Statement Te s t e d t o C o m p l y This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4

FCC ID: PRDPRERECEI001 Report No. RF961018L05 Operational Description The transmitter of the EUT (Presenter Receiver) is powered from host equipment. The antenna is Wired antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF961018L05 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO. :RF961018L05 MODEL NO. :MRC (refer to item 3.1 for more details) RECEIVED :Oct. 17, 2007 TESTED :Oct. 17 ~ Oct. 19, 2007 ISSUED :Oct. 22, 2007 APPLICANT : Acrox Technologies Co., Ltd ADDRESS : 8F, No. 437, Rui Guang RD., Nei Hu Dist., Taipei 114, Taiwan, R.O.C. ISSUED BY : Advance Data Technology Corporation LAB ADDRESS : No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 31 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF961018L05 2 Report Format Version 2.0.6 Table of Contents 1. CERTIFICATION .......................................................................................................... 3 2. SUMMARY OF TEST RESULTS .................................................................................. 4 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 4 3. GENERAL INFORMATION........................................................................................... 5 3.1 GENERAL DESCRIPTION OF EUT............................................................................. 5 3.2 DESCRIPTION OF TEST MODES............................................................................... 6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................. 8 3.4 DESCRIPTION OF SUPPORT UNITS ......................................................................... 8 4. TEST TYPES AND RESULTS ...................................................................................... 9 4.1 RADIATED EMISSION MEASUREMENT .................................................................... 9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................................. 9 4.1.2 TEST INSTRUMENTS ............................................................................................... 10 4.1.3 TEST PROCEDURES ................................................................................................ 11 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................... 11 4.1.5 TEST SETUP ............................................................................................................. 12 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 12 4.1.7 TEST RESULTS ......................................................................................................... 13 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 21 4.2.2 TEST INSTRUMENTS ............................................................................................... 21 4.2.3 TEST PROCEDURES ................................................................................................ 22 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 22 4.2.5 TEST SETUP ............................................................................................................. 23 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 23 4.2.7 TEST RESULTS ......................................................................................................... 24 4.3 BAND EDGES MEASUREMENT ............................................................................... 26 4.3.1 LIMITS OF BAND EDGES MEASUREMENT ............................................................ 26 4.3.2 TEST INSTRUMENTS ............................................................................................... 26 4.3.3 TEST PROCEDURE .................................................................................................. 26 4.3.4 DEVIATION FROM TEST STANDARD ...................................................................... 26 4.3.5 EUT OPERATING CONDITION ................................................................................. 26 4.3.6 TEST RESULTS ......................................................................................................... 26 5. PHOTOGRAPHS OF THE TEST CONFIGURATION................................................. 29 6. INFORMATION ON THE TESTING LABORATORIES ............................................... 30 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB........................................................................................ 31 Report No.: RF961018L05 3 Report Format Version 2.0.6 1. CERTIFICATION PRODUCT: Presenter Receiver MODEL: MRC (refer to item 3.1 for more details) BRAND: ACROX (refer to item 3.1 for more details) APPLICANT: Acrox Technologies Co., Ltd TESTED: Oct. 17 ~ Oct. 19, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: MRC) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions spe…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST