PRDTWRFSMMICERF TiltWheel Optical Mouse

USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2007 Targus Group International, Inc. and Targus, Inc. AMW25US / 410-1098-001A Wireless Optical Stow-N-Go TM Notebook Mouse 30 WIRELESS OPTICAL STOW-N-GO TM NOTEBOOK MOUSE Introduction Congratulations on your purchase of the Wireless Optical Stow-N-Go TM Notebook Mouse. This mouse features a tracking resolution switch for users who require more precision or speed with various applications. The Stow-N-Go receiver clips onto the mouse for ease of use while traveling or on the go. This mouse also features a 4-way scrolling tilt- wheel which allows for both vertical and horizontal navigation. • Hardware - USB port • Windows® 2000/XP • Windows Vista™ • Mac OS X 10.2.8 (or greater) System Requirements 2 Installing the Batteries Wireless Optical Stow-N-Go TM Notebook Mouse 2. Insert two AA-size batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. To replace the battery cover, place the cover on top of the mouse and slide forward until it clicks into place. NOTE: WHEN THE BATTERY IS LOW, THE LOW POWER INDICATOR LIGHT LOCATED IN THE DPI SWITCHING BUTTON WILL FLASH RED. PLEASE REPLACE WITH TWO NEW AA-SIZE BATTERIES. 1. Remove the battery cover from the back of the mouse by sliding off the cover of the mouse. Hold the mouse in your hands and with the back of the mouse away from you. Press down on the corners of the battery cover and slide towards the back of the mouse. Lift the cover off from the back of the mouse. When power is on, the mouse goes into "sleep mode" after 8 minutes of inactivity. To activate the mouse, press any mouse key. DPI switching button 3 Wireless Optical Stow-N-Go TM Notebook Mouse (A) Remove the USB receiver from the bottom of the mouse. This will activate the on/off switch. Establishing the Connection (B) (A) (C) (D) (B) Plug the USB receiver into an available USB port on your computer. (C) Press and release the setup key on the receiver. (D) Press the setup key on the bottom of the mouse. This device has 256 identification codes that allow the mouse and its receiver to operate without interference from other radio frequency devices. If you experience interference during use, repeat steps C and D to change the connection channel. NOTE: TO TURN THE MOUSE OFF, SIMPLY PLACE THE USB RECEIVER BACK INTO THE STORAGE SLOT. THIS WILL MAXIMIZE BATTERY LIFE WHEN NOT IN USE. 4 Wireless Optical Stow-N-Go TM Notebook Mouse This mouse is equipped with a 4-way scrolling function. Installing the tilt-wheel software driver To enable the tilt-wheel function, the software driver must be installed. NOTE: PLEASE SELECT THE "3 BUTTON MOUSE" OPTION WHEN PROMPTED TO DO SO. 2. The Installation Wizard window will prompt. Follow the on-screen instructions to complete the installation. 1. Insert the driver software CD into your computer’s CD-ROM drive. If setup does not begin automatically, click Start, Run, and enter D:\Setup.exe (where D: is the path of your CD-ROM drive) and then click OK. After the software driver is successfully installed, there will be a “Tilt Mouse” icon located in the task bar. NOTE: THE TILT-WHEEL FEATURE IS SUPPORTED BY THE MAC OPERATING SYSTEM. NO DRIVER INSTALLATION IS NECESSARY. THE FOLLOWING STEPS ARE FOR WINDOWS OPERATING SYSTEMS ONLY. 1. Please download the software driver (Model # AMW25) from the official Targus web site: http://www.targus.com Save the setup.exe file to your computer and double click on the icon to launch the installation process. 5 Wireless Optical Stow-N-Go TM Notebook Mouse Adjusting the DPI Setting This mouse features 3 selectable resolution settings (1600 / 1200 / 800 DPI). By pressing the resolution switch, you can instantly adjust the tracking speed of the mouse. When the DPI is set at 1600, the indicator light will glow brightest and when it is set at 1200, the light will become dimmer. The indicator will be off when the DPI is set at 800 DPI. The setting will be saved when the mouse is turned off. The indicator light will shut off in 10 seconds after selecting the desired resolution. 1600 DPI 1200 DPI 800 DPI Pressing the scroll-wheel left or right, enables the horizontal scrolling feature. Using the 4-way scrolling tilt-wheel NOTE: DOUBLE CLICK ON THE “TILT MOUSE” ICON IN THE TASK BAR WILL LAUNCH THE MOUSE SETTINGS SCREEN. YOU CAN EDIT THE SETTINGS AND PREFERENCES IN THIS WINDOW. 6 Wireless Optical Stow-N-Go TM Notebook Mouse Mac OS Mac OS: After selecting the desired resolution, you can also fine tune the sensitivity. This can be adjusted in the “System Preference” of the Mac operating system. Click on the Apple logo --> System Preference --> Keyboard & Mouse In the “Keyboard & Mouse” window, locate the “Trackpad” tab. Under “tracking speed”, use the slider to change the speed of the mouse. Windows XP Windows XP: After selecting the desired resolution, you can also fine tune the sensitivity. This can be adjusted in the “control panel” of the Windows operating system. Click on Start --> Setting --> Control Panel --> Mouse In the “mouse properties” window, locate the “pointer options” tab. Under “motion”, use the slider to change the speed of the mouse. Click apply to confirm the changes. 7 Transmitter Receiver RF • 27.045Mhz Interface • USB 1.1 Power • USB Bus Powered 5V DC Product Specification RF • 27.045Mhz Battery Type • Alkaline battery AA Effective RF Communication Range • 1.2 meters max RF output Power • Below 1mW max Power Consumption • 15mA max Wireless Optical Stow-N-Go TM Notebook Mouse This mouse is equipped with the latest sensor technology that conserves power and provides up to six months of battery life. Battery life is determined using one hour of continuous use, five days per week. 8 Wireless Optical Stow-N-Go TM Notebook Mouse Technical Support For technical questions, please visit: US Internet: www.targus.com/support.asp A…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

Label部份如鍵頭指示方向

Page 2 Page 3 Page 4 Page 5 Page 6

FCC ID: PRDTWRFSMMICE Report No.: RF960703L13 Operational Description The transmitter of the EUT (RF TiltWheel Optical Mouse) is powered from 2.4Vdc batteries. The antenna is Loop antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF960703L13 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO.: RF960703L13 MODEL NO.: MA5 (Refer to item 3.1 for the more details) RECEIVED: Jul. 04, 2007 TESTED: Jul. 06, 2007 ISSUED: Jul. 12, 2007 APPLICANT: Acrox Technologies Co., Ltd ADDRESS: 8F, No. 437, Rui Guang RD., Nei Hu Dist., Taipei 114, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 16 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960703L13 2 Report Format Version 2.0.6 Table of Contents 1 CERTIFICATION..............................................................................................3 2 SUMMARY OF TEST RESULTS .....................................................................4 2.1 MEASUREMENT UNCERTAINTY...................................................................4 3 GENERAL INFORMATION ..............................................................................5 3.1 GENERAL DESCRIPTION OF EUT ................................................................5 3.1 DESCRIPTION OF TEST MODES ..................................................................6 3.1.1 CONFIGURATION OF SYSTEM UNDER TEST.............................................6 3.1.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL...................6 3.2 GENERAL DESCRIPTION OF APPLIED STANDARDS..................................7 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................7 4 TEST PROCEDURE AND RESULT.................................................................8 4.1 RADIATED EMISSION MEASUREMENT........................................................8 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .....................................8 4.1.2 TEST INSTRUMENT .......................................................................................9 4.1.3 TEST PROCEDURE......................................................................................10 4.1.4 TEST SETUP................................................................................................. 11 4.1.5 EUT OPERATING CONDITION..................................................................... 11 4.1.6 TEST RESULTS ............................................................................................12 5 PHOTOGRAPHS OF THE TEST CONFIGURATION....................................14 6 INFORMATION ON THE TESTING LABORATORIES...................................15 7 APPENDIX-A .................................................................................................16 Report No.: RF960703L13 3 Report Format Version 2.0.6 1 CERTIFICATION PRODUCT: RF TiltWheel Optical Mouse MODEL: MA5 (Refer to item 3.1 for the more details) BRAND: ACROX (Refer to item 3.1 for the more details) APPLICANT: Acrox Technologies Co., Ltd TESTED: Jul. 06, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.227), ANSI C63.4-2003 The above equipment (model: MA5) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jul. 12, 2007 Peggy Chen / Specialist TECHNICAL ACCEPTANCE : , DATE:Jul. 12, 2007 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE:Jul. 12, 2007 Gary Chang / Assistant Manager Report No.: RF960703L13 4 Report Format Version 2.0.6 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission NA Power supply is 2.4Vdc from batteries 15.227 15.209 Radiated Emission Test PASS Meet the requirement of limit. Minimum passing margin is –10.96dB at 955.38MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Measurement Frequency Uncertainty Conducted emissions 9kHz~30MHz 2.44 dB 30MHz ~ 200MHz 3.34 dB Radiated emissions 200MHz ~1000MHz 3.35 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF960703L13 5 Report Format Version 2.0.6 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT RF TiltWheel Optical Mouse MODEL NO. MA5 (Refer to Note for the more details) FCC ID PRDTWRFSMMICE POWER SUPPLY 2.4Vdc from battery (For transmitter) 5.0Vdc from host equipment (For receiver) MODULATION TYPE FSK CARRIER FREQUENCY OF EACH CHANNEL 27.045MHz (For transmitter) 26.590MHz (For receiver) NUMBER OF CHANNEL 1 ANTENNA TYPE Loop antenna DATA CABLE NA I/O PORTS USB for receiver ACCESSORY DEVICE NA NOTE: 1. The following models are provided to this EUT. BRAND Model Name Remark ACROX MA5 Transmitter ACROX MRQ Receiver TARGUS AMW25 For marketing difference only - Transmitter & Receiver 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF960703L13 6 Report Format Version 2.0.6 3.1 DESCRIPTION OF TEST MODES The EUT only has one channel. TRANSMITTER CHANNEL FREQUENCY (MHz) 1 27.045 3.1.1 CONFIGURATION OF SYSTEM UNDER T…

Text truncated - open the document above for the full version.

A Att 0 dB * Ref 97 dBμV Center 26.945 MHzSpan 1.5 MHz150 kHz/ * * RBW 10 kHz VBW 30 kHz SWT 15 ms 1 PK VIEW 0 10 20 30 40 50 60 70 80 90 1 Marker 1 [T1 ] 22.30 dBμ V 26.960000000 MHz 2 Marker 2 [T1 ] 53.28 dBμ V 27.047000000 MHz 3 Marker 3 [T1 ] 20.53 dBμ V 27.280000000 MHz F1 F2

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST