PT3-SCPedometer

OPEN SWAROVSKI SHINE Place the Battery Tool into the notch and open the back cover by twisting the opener to pop the back cover off the device. ABRA SU SWAROVSKI SHINE Inserte la herramienta de la batería en la ranura y abra la cubierta posterior realizando un movimiento de lado a lado con el abridor. A continuación, haga palanca para abrir la cubierta posterior. OUVRIR SWAROVSKI SHINE Placez la clé du compartiment à pile dans l‘encoche et ouvrez le couvercle en effectuant un mouvement de bascule d’avant en arrière avec votre outil. Puis soulevez le couvercle arrière. INSERT BATTERY Place the battery directly into the device with the plus sign facing the user. Centrally place the back cover on the device and press firmly together until you hear a click. INSERTE LA BATERÍA Inserte la batería directamente en el dispositivo, con el signo positivo orientado hacia el usuario. Coloque la cubierta posterior centrada en el dispositivo y presione con firmeza hasta que escuche un clic que indique que ha encajado en su lugar. INSÉREZ LA PILE Placez la pile directement dans l’appareil. Le signe + doit être situé face à l’utilisateur. Placez le couvercle au centre de l’appareil et pressez fermement jusqu’à ce que vous entendiez un clic. 1. 2. 3. LINK SWAROVSKI SHINE Download the Misfit SHINE™ application from the App Store. Create an account, set a goal and link SWAROVSKI SHINE by placing it on your smartphone screen when prompted to do so. It may take a couple minutes as SWAROVSKI SHINE upgrades to the latest firmware. CONECTE SU SWAROVSKI SHINE Descargue la aplicación de Misfit SHINE™ del App Store. Cree una cuenta, establezca un objetivo y conecte el SWAROVSKI SHINE. Cuando le indique, colóquelo en la pantalla. Es posible que transcurran unos minutos hasta que su SWAROVSKI SHINE se actualice a la versión más reciente del firmware. CONNECTEZ SWAROVSKI SHINE Téléchargez l‘application Misfit SHINE™ à partir de l‘App Store. Créez un compte, définissez votre objectif et connectez SWAROVSKI SHINE en le plaçant sur l‘écran lorsque vous êtes invité à le faire. La mise à a jour du micro logiciel de SWAROVSKI SHINE peut prendre quelques minutes. 1. 2. WEAR AND MOVE Put SWAROVSKI SHINE into your prefered jewelry piece or sport band and get moving! Use the pouch to protect the delicate crystal when taking SWAROVSKI SHINE out of the carrier. COLÓQUESELO Y MUÉVASE ¡Adapté SWAROVSKI SHINE a tu accesorio o pulsera deportiva favoritos y ponte en marcha! Utilice el estuche para proteger el delicado cristal cuando extraigas tu monitor SWAROVSKI SHINE del soporte. PORTEZ SWAROVSKI SHINE ET BOUGEZ Insérez SWAROVSKI SHINE dans votre bijou ou bracelet sport favori et bougez ! Servez-vous de la pochette pour protéger le cristal quand vous l’ôtez de son support. Insert SWAROVSKI SHINE from back Inserción de SWAROVSKI SHINE desde la parte posterior Insertion du SWAROVSKI SHINE par l’arrière. Slake bracelet Necklace Sport band W ristband DOUBLE TAP Double tap SWAROVSKI SHINE with one or two fingers to see progress towards your daily goal and the time (when enabled via ‘My SHINE’ in the app). SWAROVSKI SHINE is meant to be worn, so tapping when SWAROVSKI SHINE is on a hard surface does not work well. DOBLE TOQUE Dé un doble toque con uno o dos dedos, para ver el progreso hacia su meta diaria, y la hora (si usted activó esta función en el menú “Mi SHINE” en la aplicación). SW AROVSKI SHINE está diseñado para llevarlo puesto, por lo que no funcionará sobre ninguna otra superficie. TAPEZ DEUX FOIS Tapez deux fois sur SWAROVSKI SHINE avec un ou deux doigts pour visualiser votre progression vers votre objectif quotidien ainsi que l‘heure (si vous avez activé cette fonction dans le menu <<Mon SHINE>> de l‘application). Progress Progreso Progression 25% 12, 3, 6, 9: reference lights luces de referencia voyants lumineux hour: bright light hora: luz intensa heures: lumière continue minute: blinking light minuto: luz intermitente minutes: lumière clignotante 75% 10:10 10:10 100% Time Hora Heure SYNC Sync with the app to see your activity stats and highlights, and watch your - self improve over time. SINCRONÍCELO Sincronice el SWAROVSKI SHINE con la aplicación para ver las estadísticas de su actividad y progreso a lo largo del tiempo. SYNCHRONISEZ Synchronisez SWAROVSKI SHINE avec l’application pour consulter vos statis - tiques d’activité et suivre vos progrès avec le temps. QUICK START GUIDE GUÍA RÁPIDA GUIDE DE DÉMARRAGE RAPIDE SWAROVSKI SHINE est fait pour être porté. Il fonctionne moins bien sur une surface rigide. ADDITIONAL INFORMATION INFORMACIÓN ADICIONAL INFORMATION SUPPLÉMENTAIRE For further information on the SWAROVSKI SHINE family, please visit: www.swarovski.com/smartjewelry CARE ADVICE You are now the owner of a genuine Swarovski handcrafted product. Swarovski crystal is a delicate material, which must be handled with special care in accordance with the following care advice in order to avoid damage to the product, which Swarovski may not be held liable for. To ensure that your Swarovski product remains in beautiful condition over time, please observe the following. - Store your jewelry in the original packaging or a soft pouch to avoid scratching. - Polish frequently with a soft cloth to maintain the original, lustrous finish. - Please remove jewelry before washing hands, swimming or applying body care products such as perfume, hairspray, soaps and lotions as this could harm the metals and reduce the lifetime of the plating, as well as cause discoloration and loss of crystal brilliance. - Put on jewelry last when dressing, and take off first when undressing. - Please note that jewelry carriers should not be exposed to water. - Avoid hard contact (e.g . knocking against objects) which could cause scratches, chips and other damage. CONSEJOS PARA EL CUIDADO Acabas de adquirir un accesorio auténtico de Swarovski hecho a mano. El cristal de Swarovski es un material delicado que debe manipularse con especial cuidado y de conf…

Text truncated - open the document above for the full version.

Misfit Wearables Corporation 5 Brookdale Road, Salem, NH 03079 Fax: +1 (650) 241 3805 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: PT3-SC To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Emission Designator and Type of Modulation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until April 1 st , 2015: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Jimmy Duong Senior Validation Engineer Misfit Wearables Corp March 15, 2015

Misfit Wearables Corporation 5 Brookdale Road, Salem, NH 03079 Fax: +1 (650) 241 3805 Date: March 15, 2015 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; Misfit Wearables Corporation 5 Brookdale Road, Salem, NH 03079 Fax: +1 (650) 241 3805 i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jimmy Duong Senior Validation Engineer Misfit Wearables Corp REMARK: 1. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.

Swarovski Shine! 2015-03-18! MODEL: SC! External Photos! Misfit Wearables!

Misfit Wearables Corporation 5 Brookdale Road, Salem, NH 03079 Fax: +1 (650) 241 3805 FCC ID and IC Label and Location Inner Back Cover Label Inner Top Cover Label (on PCB)

Swarovski Shine! 2015-03-18! MODEL: SC! Internal Photos! Misfit Wearables! Board Photos! Misfit Wearables! Misfit Wearables!

NVLAP Lab code: 100414-0 FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR Pedometer MODEL NUMBER: SC FCC ID: PT3-SC IC: 10638A-SC REPORT NUMBER: 10629147A-1 ISSUE DATE: March 24, 2015 Revision Date: March 27, 2015 Prepared for Misfit 839 Mitten Rd, Suite 100 Burlingame, CA 94010 Prepared by UL LLC 333 Pfingsten Rd. Northbrook, IL 60062 TEL: (847) 272-8800 REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 2 of 36 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Revision History Rev. Issue Date Revisions Revised By -- 03/24/15 Initial Issue M.Ferrer 1 03/27/15 Updated OCBW, Duty cycle factor, RE data M.Ferrer REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 3 of 36 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ............................................................................................. 4 2. TEST METHODOLOGY .................................................................................................................. 5 3. FACILITIES AND ACCREDITATION .......................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .......................................................................................... 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 4.2. SAMPLE CALCULATION ............................................................................................................ 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................................... 6 5.5. DESCRIPTION OF TEST SETUP ................................................................................................ 8 6. TEST AND MEASUREMENT EQUIPMENT .............................................................................. 10 7. TEST RESULTS ............................................................................................................................... 11 7.1. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ................................................. 11 7.2. ON TIME AND DUTY CYCLE RESULTS .................................................................................. 11 7.3. DUTY CYCLE PLOTS ................................................................................................................ 12 7.3.1. 99% 20DB BANDWIDTH ................................................................................................ 13 7.4. RADIATED EMISSIONS............................................................................................................. 17 7.4.1. FUNDAMENTAL FREQUENCY RADIATED EMISSION ............................................ 18 7.4.2. TRANSMITTER RESTRICTED BAND EDGES ............................................................. 19 7.4.3. HARMONICS AND SPURIOUS EMISSIONS ABOVE 1GHz ....................................... 27 7.4.4. WORST-CASE BELOW 1 GHz ........................................................................................ 32 8. SETUP PHOTOS .............................................................................................................................. 33 REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 4 of 36 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Misfit 839 Mitten Rd. Suite 100 Burlingame, CA 94010 EUT DESCRIPTION: Pedometer MODEL: SC SERIAL NUMBER: Prototype DATE TESTED: March 20, 2015 – March 27, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass INDUSTRY CANADA RSS-210 Issue 8 Annex A2.9 Pass INDUSTRY CANADA RSS-GEN Issue 4 Pass UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL LLC based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL LLC By: Tested By: Bart Mucha MICHAEL FERRER Staff Engineer Program Manager UL LLC UL LLC REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 5 of 36 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.10-2009, FCC CFR 47 Part 2, FCC CFR 47 Part 15, RSS-GEN Issue 4, and RSS-210 Issue 8. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 333 Pfingsten Road, Northbrook, IL 60062 USA. UL NBK …

Text truncated - open the document above for the full version.

REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 31 of 34 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 8. SETUP PHOTOS RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS FRONT PHOTO REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 32 of 34 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Y-AXIS FRONT PHOTO REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 33 of 34 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Z-AXIS FRONT PHOTO REPORT NO: 10629147A DATE: March 27, 2015 FCC ID: PT3-SC IC:10638A-SC Page 34 of 34 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC END OF REPORT Above 1GHz EUT 1.5m Below 1GHz EUT 80cm