PU9MD-SMemory Drive

MemoryDrive - MD-S - USER’S MANUAL 1. Introduction MemoryDrive is a small and simple plug-n-play mobile flash memory device for Windows ,Mac OS and Linux which utilizes a standard USB port. MemoryDrive operates as a removable hard drive on your computer. MemoryDrive does not require software drivers* (for Windows 98, driver installation is required). MemoryDrive allows for the data to be easily transferred across different OS platforms (i.e. PC to Mac and vice versa) just by plugging in the MemoryDrive into the USB port on your computer. MemoryDrive is available with various memory capacities ranging from 16MB to 384MB. MemoryDrive is a portable hard drive that uses state of the art technology containing a non-volatile flash memory semi-conductor chip. 2. Features ̧ No driver or installation software required (except for Windows 98/SE)* ̧ Hot “Plug and Play” via USB port on PC and Mac ̧ Cross platforms between PC and Mac and vice versa ̧ Supports USB 1.1 ̧ Supports OS : Windows98/SE, Windows ME. Windows 2000, Windows XP, Mac 8.6 or higher and Linux 2.4.x ̧ Capacities: 16 MB/ 32 MB/ 64 MB/ 128 MB/ 256 MB/ 384 MB ̧ Compact, Light Weight and Durable ̧ 2 color illumination to indicate data transferring status ‡ Green : Device connected, Red : Data transferring ̧ 10-years of data retention ̧ Accessories : Extension cable (1 meter), neck strap, Windows 98 installation CD, user’s manual * Installation program included when using Windows 98/SE. This program is supplied with the MemoryDrive or can be downloaded from our website (www.memorydrive.com). 3. System Requirements IBM PC/AT or compatible (Desktop / Notebook / Sub-Notebook / Laptop computers) with at least a 100 MHz Pentium or better, or Apple® Macintosh™, with USB ports. 4. Driver Installation for Windows  98/SE (AutoSetup Package) 4.1 Before installation of the drivers, check first that the USB controller of your computer is working well. Open the [Control Panel] ‡ [System Properties] ‡ [Device Manager], then check if it shows “Universal Serial Bus controllers” and see if they are in good working condition. If your computer does not have USB controller, then the USB device will not work. 4.2 The screen as below is appeared if insert CD-ROM for installing the driver. Click the “Start” button to install the driver. 5. Driver Installation for Windows  98/SE (Basic Package) 5.1 Insert the supplied CD-ROM installation software in the PC CD-ROM drive, and plug the MemoryDrive into PC’s USB port. A “USB Device has been found” message and the following dialog box “Add New Hardware Wizard” will show up onto your screen. Then press “Next”. 5.2 Dialog box shows how Windows searches for the MemoryDrive drivers. Choose “ Search for the best driver...” and press “Next” button. 5.3 Dialog box shows where to locate the MemoryDrive drivers. Select item “CD-ROM drive”. Press “Next” button. 5.4 Dialog box shows that Windows has located the MemoryDrive driver in CD-ROM drive. If installation is to be continued, press “Next” button. 5.5 Dialog box shows that Windows has finished the installation of the Memory Drive driver. Press “Finish” button. 5.6 Now all the drivers and controllers have been installed into your system. You should see the Removable Disk icon appearing in the window when you activate the “My Computer” icon. You are ready to easily transfer data between your MemoryDrive and computer. 6. How to use ? The Memory Drive functions as a removable disk drive on your computer. When you insert the MemoryDrive to the USB port of your PC or Mac, then the “removable disk” icon will appear in the “My Computer Folder”. You can use the MemoryDrive the same way as a Floppy disk or a Hard drive on your computer. When you pull out the MemoryDrive from the USB port, the above icon will disappear. You can find if the MemoryDrive controller is installed properly by clicking onto “Control Panel” - “System Properties” - “Device Manager”. 7. X-Format (xFormat.exe) 7.1 Open xFormat window, you can choice two type format as following. [Pic. (a)] 1) Quick Format : It's called Logical Format like Windows Format. 2) Full Format : It's called Physical Format, in case of Full Format, cleaning all sector of the memory. But it takes long time, so it is not often used. and click “Start” button then execute format. [Pic. (b)] 7.2 Full(Physical) Format must be use in unavoidable case as below. 1) The BSOD(Blue Screen Of Death) is appeared on writing and reading. (It is caused by that bad sectors are created inside the memory from careless.) 2) Windows(or DOS) Format is not working. * Format will erase all the data in the device. 7.3 You can use this function after check “Enable password feature” option and format. (Refer to 8. for how to use X-Key.) * For use of this function, if the format is completed, execute X-Key program after Memory Drive disconnect and connect again to USB port. 7.4 If you check “Make bootable disk” option and format, you can use in place of Floppy Diskette(or Bootable CD-ROM etc). But if you want to use this function, “USB-ZIP” must be in Bootable section of CMOS(ROM-BIOS). For more information please ask each PC mainboard manufactures. (We cannot solve this problem.) * Bootable function is only for Windows 98/98SE/ME. 8. X-Key (xKey.exe) 8.1 X-Key Program is device lock security program which protect the approach from the outside in case of important files that need preservation in USB Mass Storage Device. 8.2 For using X-Key Program, you have to format after select 'Enable password feature' option in X-Format. (Refer to 7. for how to use X-Format.) 8.3 If the format is completed, execute X-Key program after Memory Drive disconnect and connect again to USB port. 8.4 You can see window on screen as below if execute X-Key program, if you input password(first password is “1111”.) and click “Apply” Memory Drive is unlock and use it. 8.5 If execute X-Key program, key-shaped icon is created at Tray Bar on right button, after click the right button of mou…

Text truncated - open the document above for the full version.

USD2-S Block Diagram MICOM FLASH Memory USB Port A PC X-TAL 8 Mhz Regulator 3.3V

KTI02EF08004 FCC ID: PU9MD-S Korea Technology Institute Co., Ltd. Page 1 of 2 External photo-Front KTI02EF08004 FCC ID: PU9MD-S Korea Technology Institute Co., Ltd. Page 2 of 2 External photo-Rear

Korea Technology Institute Co., Ltd. Page 1 of 1 FCC ID Sample Label Model Number: MD-S FCC ID : PU9MD-S STORMBLUE Co., Ltd. Made in Korea This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Korea Technology Institute Co., Ltd. Page 1 of 1 Label location LABEL

KTI02EF08004 FCC ID: PU9MD-S Korea Technology Institute Co., Ltd. Page 1 of 1 Internal photo-Board

KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 1 of 13 Test Report Test Report No.: KTI02EF08004 Registration No.: 99058 Applicant: STORMBLUE CO., LTD. Applicant Address: 3 rd Floor 144-9 Doksan-Dong Kumchun-Gu Seoul 153-011 Korea Product: Memory Drive FCC ID: PU9MD-S Model No. MD-S Receipt No.: 02-0725 Date of receipt: July 24,2002 Date of Issue: August 27, 2002 Testing location Korea Technology Institute Co., Ltd. 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea Test Standards: ANSI. C63.4 : 1992 Rule Parts: FCC Part 15, Subpart B Equipment Class: Computing Device Test Result: The above mentioned product has been tested and passed. Approved by: G. C. Min/ President Tested by: M.H.Jang/ Engineer Signature Date Signature Date Other Aspects : Abbreviations : • OK, Pass=passed • Fail=failed • N/A=not applicable  ▪ This test report is not permitted to copy partly without our permission. ▪ This test result is dependent on only equipment to be used. ▪ This test result is based on a single evaluation of one sample of the above mentioned. ▪ This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S Government. ▪ We certify this test report has been based on the measurement standards that is traceable to the national or international standards. KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 2 of 13  Contents  1. 2. 3. 4. 5. 6. Annex1 Annex2 Contents List of Tables List of Figures List of Photographs General Test Site 2.1 Location 2.2 List of Test and Measurement Instruments 2.3 Test Data 2.4 Test Environment Description of the tested samples 3.1 Rating and Physical characteristics 3.2 Submitted documents Measurement conditions 4.1 Modes of operation 4.2 List of peripherals 4.3 Uncertainty 4.4 Test Setup Emission Test 5.1 Conducted Emissions 5.2 Radiated Emissions Photographs of the Test Set-up Label Photographs of EUT 2 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 6 7 8 8 12 14 16 18~20  List of Tables Table 1 List of test and measurement equipment Table 2 Test Data. Conducted Emissions Table 3 Test Data. Radiated Emissions  List of Figures Figure 1 Spectral Diagram, LINE-PE Figure 2 Spectral Diagram, Neutral-PE  List of Photographs Photograph 1 Setup for Radiated Emissions Photograph 2 Setup for Conducted Emissions 4 11 13 9 10 14 15 KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 3 of 13 1. General This equipment has been shown to be capable of compliance with the applicable technical standards and was tested in accordance with the measurement procedures as indicated in this report. We attest to the accuracy of data. Korea Technology Institute Co., Ltd. performed all measurements reported herein. And were made under Chief Engineer’s supervisor. We assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. 2. Test Site Korea Technology Institute Co., Ltd. 2.1 Location 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea The Test Site is in compliance with ANSI C63.4/1992 for measurement of radio Interference. KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 4 of 13 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment - Conducted Emissions Kind of Equipment Type S/N Calibrated until Spectrum Analyzer R3261C 61720417 11.2002 Field Strength Meter ESPC 832827/011 9.2002 LISN KNW407 8-1157-2 10.2002 LISN ESH2-Z5 8254601019 6.2002 Conducted Cable N/A N/A 11.2002 - Radiated Emissions Kind of Equipment Type S/N Calibrated until Field Strength Meter ESPC 832827/011 9.2002 Spectrum Analyzer R3261C 61720417 11.2002 Pre Amplifier 8447D 2944A06874 11.2002 BiconiLog Antenna 3142B 1705 12.2002 Horn Antenna 3115 6443 7.2002 Open Site Cable N/A N/A N/A Antenna Mast DETT-03 N/A N/A Antenna & Turntable controller DETT-04 91X519 N/A 2.3 Test Date Date of Application: July 24, 2002 Date of Test: August 23, 2002 2.4 Test Environment See each test item’s description. KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 5 of 13 3. Description of the tested sampleswww The EUT is Memory Drive 3.1. Rating and Physical Characteristics - Supported OS : Windows 98/SE, Windows ME, Windows 2000, Windows XP, MAC 8.6 or higher, Linux 2.4.x - Power Supply : USB bus-powered (4.5V to 5.5V) - Data Retention : 10 years - ILLUMINATION : GREEN – Device connected Red Flashing – Data receiving or transmitting - Data Reading/Writing Speed : Max 12Mbits/Sec (depending on PC system) - Operating Temperature : 0  ~ + 50  - storage Temperature : - 30  ~ + 80  - Demension : 63mm × 21mm × 11.6 mm - Weight : 15 g 3.2. Submitted Documents - User’s Guide - Block Diagram KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 6 of 13 4. Measurement Conditions Testing Input Voltage: USB bus-powered (4.5V to 5.5V) 4.1 Modes of Operation The EUT was in the following operation mode during all testing; 1. EUT connected to Computer. 4.2 Additional Equipment DEVICE TYPE Manufacturer M/N S/N FCC ID PC COMPAQ COMPUTER CORPORATION Deskpro EXM 6F13JC8JN619 - Monitor Samsung Electronics 750S P223HVAR502035 - Keyboard COMPAQ COMPUTER CORPORATION KB-9963 B26960GBUKKOVW - Mouse logitech M-S48a None JNZ201213 Mouse SEJIN ELECTRON INC. SMB-400 0CIM004047 GJJS965M3 Printer HEWLETT PACKARD C4569A SG6A7160PJ - 4.3 Uncertainty 1) Radiated disturbance Uc (Combined standard Uncertainty) = ± 1.8dB Expanded uncertainty U=KUc K = 2  U = ± 3.6dB 2) Conducted disturbance Uc = ± 0.88dB U = KUc=2 x Uc = ± 1.8dB KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 7 of 13 4.4 Test Setup Signal Line PC PRINTER MONITER KEYBOARDMOUSE MOUSE EUT KTI02EF08004 FCC ID : PU9MD-S Korea Technology Institute Co., Ltd. Page 8 of 13 5. EMISSION Test 5.1.Conducted Emissions Result: Pass The line-conducted facility is located inside a 2.3M x 3.5M x 5.5M shi…

Text truncated - open the document above for the full version.

KTI02EF08004 FCC ID: PU9MD-S Korea Technology Institute Co., Ltd. Page 1 of 2 6. Photograph of the Test Set-Up Photograph 1 : Setup for radiated Emissions KTI02EF08004 FCC ID: PU9MD-S Korea Technology Institute Co., Ltd. Page 2 of 2 Photograph 2 : Setup for Conducted Emissions