PY305400024Integrated ADSL Modem + Wireless Router with Voice

February 2006 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice ii v1.0, February 2006 © 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Channel The Wireless Channel sets the radio frequency used for communication. Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent Access Points use different Channels to reduce interference. In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join. Note:This equipment marketed in USA is restricted by firmware to only operate on 2.4G channel 1-11 . 1 v1.0, February 2006 Contents Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice Chapter 1 Connecting the Router to the Internet What’s in the Box? ..........................................................................................................1-1 The Router’s Front Panel .........................................................................................1-2 The Router’s Rear Panel .........................................................................................1-3 What You Need Before You Begin ..................................................................................1-4 Internet Configuration Requirements .......................................................................1-4 Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup ......................................1-4 Smart Wizard Setup .......................................................................................................1-5 Manual Setup .................................................................................................................1-6 Understanding ADSL Microfilters .............................................................................1-6 Computers Set to DHCP ..........................................................................................1-7 Manually Setting Up Your ADSL Modem Wireless Router .............................................1-7 How to Manually Set Up and Test Basic Wireless Connectivity ...................................1-13 Implement Appropriate Wireless Security ....................................................................1-14 Chapter 2 Troubleshooting Basic Functioning ...........................................................................................................2-1 Power LED Not On ...................................................................................................2-2 Test LED Never Turns On or Test LED Stays On ..…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Title Document NumberRev Date:Sheetof DG834GVSP/GVBSP A / A Sercomm BLOCK DIAGRAM 00Wednesday, November 29, 2006 SerComm Corp. Title Document NumberRev Date:Sheet of DG834GVSP/GVBSP A / A Sercomm BLOCK DIAGRAM 00Wednesday, November 29, 2006 SerComm Corp. Title Document NumberRev Date:Sheet of DG834GVSP/GVBSP A / A Sercomm BLOCK DIAGRAM 00Wednesday, November 29, 2006 SerComm Corp. Host Processor ADSL LINE IN V921 Power Supply Phy RJ11 Ethernet ADSL SANGAM (Page 5) Transceiver VDSP 4 x RJ45 (Page 2) GPIO (Page 8) HYBRID (PAGE 3) MARVELL 88E6060 MII (Page 7) VLYNQ Mini-PCI Interface (Page 4) VLYNQ 4 PORT ETHERNET ANTENNA 15V DC 1.2A (Page 6) FXS (Page 6) FXS (Page 9) FXO PCM Data Control PCM Data Control RJ11 PSTN RJ11 PHONE1 RJ11 PHONE2 POTS RELAY GPIO 20.48MHz 25MHz 35.328MHz 802.11g MODULES FLASH 2Mx16bit SDRAM 8Mx16bit 16 16

RF_160, Issue 01 Declaration of Authorization We Name: Netgear Corporation Address: 4500 Great America Parkway City: Santa Clara, CA 95054 Country: USA Declare that: Name: Exclusive Certification Corporation Address: 4F-2, No.28 Lang 78, Xing-Ai Rd. City: Nei-hu Taipei City 114 Country Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: Integrated ADSL Modem And Wireless Router With Voice Type designation: DG834GVSP Trademark: Netgear on our behalf. Date: 2006/12/4 City: California Name: Mark Gandler Signature:

Request for non-disclosure RF_501_02 Netgear Corporation 4500 Great America Parkway Santa Clara, CA 95054 USA To: Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for non-disclosure (FCC ID:PY305400024) Reference number: DG834GVSP Date: 2006-12-04 Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b), Netgear Corporation hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: ( PY305400024) a. Schematic diagrams b. Operational description Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Netgear Corporation understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Mark Gandler

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 1 of 9 FCC Test Report: FI06112204-A Appendix A. Photographs of EUT 06112204-A 06112204-A

SHEET: AUTHOR: TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPD DATE NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. INK COLOR IS SHOWN TO THE RIGHT. 5. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 5 01 AW-10199-011 of 1 AW, DG834GVSP, V1H1, PLBLM YU 12/12/06M YU INITIAL DOCUMENT CREATION 01 Pantone 430C

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 2 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 3 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 4 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 5 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 6 of 9 FCC Test Report: FI06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 7 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 8 of 9 FCC Test Report: FI06112204-A 06112204-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 9 of 9 FCC Test Report: FI06112204-A 06112204-A 06112204-A

1.1. Test Result of RF Exposure Evaluation . Product: Integrated ADSL Modem And Wireless Router With Voice . Test Item: RF Exposure Evaluation Data . Test site: OATSI-SD . Test Mode: Normal Operation 1.1.1. Antenna Gain The maximum Gain is 2.0 dBi. 1.1.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.1.3. Output Power into Antenna & RF Exposure Evaluation Distance of 20 cm Modulation Standard: IEEE 802.11b Test Date: Dec. 19, 2006 Temperature: 25 Humidity: 65% Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 01 2412 17.76 0.019 06 2437 17.55 0.018 11 2462 17.57 0.018 Modulation Standard: IEEE 802.11g Test Date: Dec. 19, 2006 Temperature: 25 Humidity: 65% Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 01 2412 17.83 0.019 06 2437 17.69 0.019 11 2462 17.68 0.018 The MPE is calculated as 0.019 mW / cm 2 < limit 1 mW / cm 2 . So, RF exposure limit warning or SAR test are not required. For 2412-2462 MHz, the EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 1 of 55 FCC Test Report: FI06112204-A FCC TEST REPORT according to FCC Rules and Regulations Part 15 Subpart C Laboratory Accreditation 1332 ‚ The test result refers exclusively to the test presented test model / sample., ‚ Without written approval of Exclusive Certification Corp. the test report shall not be reproduced except in full. ‚ The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Applicant Netgear Inc. Address 4500 Great America Parkway Santa Clara California 95054 USA Equipment Integrated ADSL Modem and Wireless Router with Voice Model No. DG834GVSP FCC ID PY305400024 Trade Name Netgear Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 2 of 55 FCC Test Report: FI06112204-A Contents 1. Report of Measurements and Examinations .................................................................................... 5 1.1 List of Measurements and Examinations ................................................................................... 5 2. Test Configuration of Equipment under Test ................................................................................... 6 2.1 Feature of Equipment under Test............................................................................................... 6 2.2 RF Specifications ....................................................................................................................... 7 2.3 Test Mode and Test Software..................................................................................................... 7 2.4 Description of Test System......................................................................................................... 8 2.5 Connection Diagram of Test System..........................................................................................9 2.6 General Information of Test......................................................................................................10 2.7 History of this test report ..........................................................................................................10 3. Antenna Requirements..................................................................................................................... 11 3.1 Standard Applicable ................................................................................................................. 11 3.2 Antenna Construction and Directional Gain............................................................................. 11 4. Test of Conducted Emission............................................................................................................12 4.1 Test Limit..................................................................................................................................12 4.2 Test Procedures.......................................................................................................................12 4.3 Typical Test Setup ...................................................................................................................13 4.4 Measurement equipment .........................................................................................................13 4.5 Test Result and Data................................................................................................................14 4.6 Test Photographs .....................................................................................................................16 5. Test of Radiated Emission ...............................................................................................................17 5.1 Test Limit..................................................................................................................................17 5.2 Test Procedures.......................................................................................................................18 5.3 Typical Test Setup ....................................................................................................................19 5.4 Measurement equipment .........................................................................................................19 5.5 Test Result and Data................................................................................................................20 5.6 Test Photographs .....................................................................................................................36 6. 6dB Bandwidth Measurement Data .................................................................................................37 6.1 Test Limit ..................................................................................................................................37 6.2 Test Procedures .......................................................................................................................37 6.3 Test Setup Layout ....................................................................................................................37 6.4 Measurement equipment .........................................................................................................37 6.5 Test Result and Data................................................................................................................37 7. Maximum Peak Output Power .........................................................................................................41 7.1 Test Limit ..................................................................................................................................41 7.2 Test Procedures ........................................................................…

Text truncated - open the document above for the full version.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 16 of 55 FCC Test Report: FI06112204-A 4.6 Test Photographs Front View Rear View Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Dec. 27, 2006 36 of 55 FCC Test Report: FI06112204-A 5.6 Test Photographs Front View Rear View