PY305400026Netgear WG111v2 54 Mbps Wireless USB 2.0 Adapter

202-10026-01 202-10026-01 Version 2.0 May 2004 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA User Manual for the NETGEAR WG111v2 54 Mbps Wireless USB 2.0 Adapter ii 202-10026-01 Technical Support Please refer to the support information card that shipped with your product. By registering your product at www.netgear.com/register , we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. E-mail: [email protected] Web site: www.netgear.com Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. ©2004 NETGEAR, Inc. NETGEAR, the NETGEAR logo, The Gear Guy and Everybody's Connecting are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved . May 2004 Certificate of the Manufacturer/Importer It is hereby certified that the Model WG111v2 Wireless USB 2.0 Adapter has been suppressed in accordance with the conditions set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations. VCCI Statement This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing 202-10026- 01 iii Equipment and Electronic Office Machines aimed at preventing radio interference in s uch residen tial areas. When used near a radio or TV receiver, it may become the cause of radio interference. Read instruc tion s for correct handling. FCC Information to User This pr odu ct doe s not con tain any user serviceable components and is to be used with approved antennas on ly. Any product changes or modifica tions will invalidate all applicable reg ulatory certifications and approva ls FCC Guid elin es for Huma n Expo sure This device has been tested and meets the FCC RF exposure guidelines. SAR has been evaluated with a laptop as host and the maximum SAR value reported is 0.53 W/kg. This trans mit ter mus t no t be co-l ocated or operating in conjunction with any other anten na or transmitter. De claration Of Con formity We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model WG111v2 Wireless USB 2.0 Adapter complies with Par t 15 of FCC Rules . Op era tion is sub ject to th e following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Regulato ry Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to co mply wi th the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority. NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product. FCC Requirements for Op eration in the United Stat es Ra dio Frequency Interf ere nce War nings & In structions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limi ts are de sig ned to provi de re asonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordan ce wi th the inst ructions, may caus e harmful int erf eren ce to radio communications. However, there is no guarantee that interfer enc e will no t occur in a parti cul ar inst all ati on. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods: • Reorient or relocate the receiving antenna • Increase th e se parati on between the equipmen t and the receive r • Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected 202-10026-01 iv • Consult the dealer or an experienced radio/TV technician for help. Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate the equipment. Export Restrictions Thi s product or software co ntai ns enc ryption co de which may not be ex ported or tran sferred from the US or Canada witho ut an approved US Depart ment of Commerce exp ort license . Europe - EU Declaration of Conformity This product is certified for Switzerland and all EU countries. Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Dire…

Text truncated - open the document above for the full version.

RF_160, Issue 01 Declaration of Authorization We Name: Netgear Inc. Address: 4500 Great America Parkway ............................................................................ City: Santa Clara California 95054................................................. Country: USA.......................................................... Declare that: Name: Exclusive Certification Corporation Address: 4F-2, No. 28, Lane 78, Xing-Ai Rd., Nei-hu City: Taipei City 114 Country: Taiwan, R. O. C.............. is authorized to apply for Certification of the following product(s): Product description: NETGEAR WG111v2 54Mpbs Wireless USB 2.0 Adapter Type designation: WG111v2 Trademark: Netgear........................................ on our behalf. Date: 2006/3/10 City: California Name: Mark Gandler Signature: __________________________

Request for non-disclosure RF_501_02 Netgear Inc., 4500 Great America Parkway Santa Clara California 95054 USA To: Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for non-disclosure (FCC ID: PY305400026) Reference number: WG111v2 Date: 2006-03-10 Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b), <Netgear Inc. > hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: PY305400026 a. Schematic diagrams b. Block diagram Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Netgear understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Signature: _____________________ Name: Mark Gandler

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 1 of 4 FCC Test Report: FI06012401-A Appendix A. Photographs of EUT 06012401-A 06012401-A

WG111v2 Tested to Comply with FCC Standards FOR HOME OF OFFICE USE NETGEAR size: 8*50 mm FCC ID: PY305400026

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 2 of 4 FCC Test Report: FI06012401-A 06012401-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 3 of 4 FCC Test Report: FI06012401-A 06012401-A 06012401-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 4 of 4 FCC Test Report: FI06012401-A 06012401-A 06012401-A

WG111 V2H2 Operation Principle 1. CPU, RTL8187L is a low-profile highly integrated cost-effective Wireless LAN USB 2.0 network interface controller that integrates a USB 2.0 PHY, SIE (Serial Interface Engine), 8051 MCU, a Wireless LAN MAC, and a Direct Sequence Spread Spectrum/OFDM baseband onto one chip. It provides USB high speed (480Mbps), and full speed (12Mbps), and supports 4 endpoints for transfer pipes. To reduce protocol overhead, the RTL8187L supports short InterFrame Space (SIFS) burst mode to send packets back-to –back. A protection mechanism prevents collisions among 802.11b nodes. The RTL8187L fully complies with IEEE 802.11a/b/g specification. 2. Transceiver RTL8225, 802.11g/b Zero-IF RF transceiver. Building synthesizer LC auto calibration. Building RX low pass filter RC auto calibration. Fast 80MHz Series interface controls transmit and receive PGA. Transceiver multi-mode control 3-wire interface or shut down transceiver by external power down pin. Whole chip ESD protection circuits. Self power on reset. On-chip Oscillator. Synthesizer clock source selectable. 3. EEPROM, The AT93C46 provides 1024bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits. 4. 2.4GHz – 2.5GHz Power Amplifier, The SE2525L-EK1 Evaluation Kit is a tool that is intended to demonstrate the performance of the RangeCharger TM SE2525L 802.11g Power Amplifier in 802.11g application. 19dBm O/P Power, 802.11b, 11Mbps. 15dBm O/P Power, 802.11g, 54Mbps.

Report No： 063L070-HP-US-P09V01 Page: 1 of 22 Version:1.0 SAR Test Report Product Name ： NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter Model No. ： WG111v2 Applicant ：Netgear Inc. Address ：4500 Great America Parkway Santa Clara, CA 95054 USA Date of Receipt：2006/03/10 Issued Date ：2006/03/20 Report No. ：063L070-HP-US-P09V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 063L070-HP-US-P09V01 Page: 2 of 22 Version:1.0 Test Report Certification Issued Date: 2006/03/20 Report No.:063L070-HP-US-P09V01 Product Name ： NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter Applicant ： Netgear Inc. Address ： 4500 Great America Parkway Santa Clara, CA 95054 USA Manufacturer ： Netgear Inc. Model No. ： WG111v2 Trade Name ： NETGEAR Applicable Standard ： FCC Oet65 Supplement C June 2001 Test Result ： Max. SAR Measurement (1g) 802.11b: 0.532 W/kg 802.11g: 0.363 W/kg Application Type Certification The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By ： (Gina Chen ) Tested By ： (Shine Hsu) Approved By ： (Gene Chang) Report No： 063L070-HP-US-P09V01 Page: 3 of 22 Version:1.0 TABLE OF CONTENTS Description Page 1. General Information.............................................................................. 5 1.1 EUT Description ............................................................................................................5 1.2 Test Environment ...........................................................................................................5 2. SAR Measurement System .................................................................. 6 2.1 ALSAS-10U System Description .................................................................................. 6 2.1.1 Applications ................................................................................................................ 6 2.1.2 Area Scans................................................................................................................... 6 2.1.3 Zoom Scan (Cube Scan Averaging)............................................................................ 7 2.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty......................................... 7 2.2 Isotropic E-Field Probe .................................................................................................. 7 2.2.1 Isotropic E-Field Probe Specification ......................................................................... 9 2.3 Boundary Detection Unit and Probe Mounting Device ................................................. 9 2.4 Daq-Paq (Analog to Digital Electronics) ..................................................................... 10 2.5 Axis Articulated Robot ................................................................................................ 10 2.6 ALSAS Universal Workstation.................................................................................... 11 2.7 Universal Device Positioner......................................................................................... 11 2.8 Phantom Types............................................................................................................. 11 2.8.1 APREL SAM Phantoms ........................................................................................... 12 2.8.2 APREL Laboratories Universal Phantom ................................................................. 12 3. Tissue Simulating Liquid ................................................................... 13 3.1 The composition of the tissue simulating liquid .......................................................... 13 3.2 Tissue Calibration Result ............................................................................................. 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ....................................... 14 4. SAR Measurement Procedure ........................................................... 15 4.1 SAR System Validation................................................................................................ 15 4.1.1 Validation Dipoles..................................................................................................... 15 4.1.2 Validation Result ....................................................................................................... 15 4.2 SAR Measurement Procedure ...................................................................................... 16 5. SAR Exposure Limits ......................................................................... 17 6. Test Equipment List............................................................................ 18 7. Measurement Uncertainty .................................................................. 19 8. Test Results ......................................................................................... 20 8.1 SAR Test Results Summary ......................................................................................... 20 Appendix A. SAR System Validation Data........................................................................ 22 Appendix B. SAR measurement Data................................................................................ 22 Report No： 063L070-HP-US-P09V01 Page: 4 of 22 Version:1.0 Appendix C. Test Setup Photographs & EUT Photographs............................................... 22 Appendix D. Probe Calibration Data ................................................................................. 22 Appendix E. Dipole Calibration Data ................................................................................ 22 Report No： 063L070-HP-US-P09V01 Page: 5 of 22 Version:1.0 1. General Information 1.1 EUT Description Product Name NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter Trade Name NETGEAR Model…

Text truncated - open the document above for the full version.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 1 of 54 FCC Test Report: FI06012401-A FCC TEST REPORT according to FCC Rules and Regulations Part 15 Subpart C Laboratory Accreditation 1332 ‚ The test result refers exclusively to the test presented test model / sample., ‚ Without written approval of Exclusive Certification Corp. the test report shall not be reproduced except in full. ‚ The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Applicant Netgear Inc. Address 4500 Great America Parkway Santa Clara California 95054 USA Equipment NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter Model No. WG111v2 FCC ID PY305400026 Trade Name NETGEAR Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 2 of 54 FCC Test Report: FI06012401-A Contents 1. Report of Measurements and Examinations .................................................................................... 5 1.1 List of Measurements and Examinations ................................................................................... 5 2. Test Configuration of Equipment under Test ................................................................................... 6 Feature of Equipment under Test.......................................................................................................... 6 RF Specifications .................................................................................................................................. 6 2.1 Test Mode and Test Software..................................................................................................... 7 2.2 Description of Test System......................................................................................................... 7 2.3 Connection Diagram of Test System..........................................................................................8 2.4 General Information of Test........................................................................................................ 9 2.5 History of this test report ............................................................................................................ 9 3. Antenna Requirements.....................................................................................................................10 3.1 Standard Applicable .................................................................................................................10 3.2 Antenna Construction and Directional Gain............................................................................. 10 4. Test of Conducted Emission............................................................................................................ 11 4.1 Test Limit.................................................................................................................................. 11 4.2 Test Procedures....................................................................................................................... 11 4.3 Typical Test Setup ...................................................................................................................12 4.4 Measurement equipment .........................................................................................................12 4.5 Test Result and Data................................................................................................................13 4.6 Test Photographs .....................................................................................................................15 5. Test of Radiated Emission ...............................................................................................................16 5.1 Test Limit..................................................................................................................................16 5.2 Test Procedures.......................................................................................................................17 5.3 Typical Test Setup ....................................................................................................................18 5.4 Measurement equipment .........................................................................................................18 5.5 Test Result and Data................................................................................................................19 5.6 Test Photographs .....................................................................................................................35 6. 6dB Bandwidth Measurement Data .................................................................................................36 6.1 Test Limit ..................................................................................................................................36 6.2 Test Procedures .......................................................................................................................36 6.3 Test Setup Layout ....................................................................................................................36 6.4 Measurement equipment .........................................................................................................36 6.5 Test Result and Data................................................................................................................36 7. Maximum Peak Output Power .........................................................................................................40 7.1 Test Limit ..................................................................................................................................40 7.2 Test Procedures ............................................................…

Text truncated - open the document above for the full version.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 15 of 54 FCC Test Report: FI06012401-A 4.6 Test Photographs Front View Rear View Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Mar. 02, 2006 35 of 54 FCC Test Report: FI06012401-A 5.6 Test Photographs Front View Rear View