PY311200164Streaming player

NeoTV Streaming Player (NTV200) Installation Guide © 2011 NETGEAR, Inc. All rights reserved. No part of this publication may be rep roduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. DO NOT stack equipment, or place equipment in tight spaces or in drawers. Be sure your equipment is surrounded by at least 2 in. of air space. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US only): 1-888-NETGEAR Phone (Other Countries):  See http://support.netgear.com/app/answers/detail/a_id/984. Trademarks NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. 3 What’s Included in the Box NeoT V Str eaming P laye r N TV200 Inst allat ion Guide Ne o T o V S t r e rr aming P l a y e r N T V200 In s t allat i on G u i d e Power adapter Remote NeoTV Streaming Player control Installation guide with batteries 4 Front and Rear Views What You Need to Use Your NeoTV Player • TV with HDMI port • HDMI cable • Broadband Internet connection • A wireless or wired network • Device with I nternet browser for service activation 5 Connect to the TV 1. Make sure that your TV is on and set to display the correct video input. 2. Connect an HDMI cable (sold separately) to the HDMI port on your player and to the HDMI IN port on your TV. HDMI supports 5.1 surround sound (if available). You do not need a separate audio cable. 3. Connect the power adapter to your player, and plug it into an e lectrical outlet. 6 Remote Control Batteries To use the remote control, remove the plastic strip beneath the batteries as shown. Connect to Your Home Network To use your player, you need to connect it to your home network with either a wireless or a wired connection. After you get your network ready, the onscreen guided setup helps you connect your player to your network. IMPORTANT: Do no t place anything on top of your NeoTV player. Placing objects on top of your player can interfere with the wireless signal or cause the player to overheat. 7 Wired Connection Use an Ethernet cable (sold separately) to connect your player to a LAN port on your router. NeoTV Router 8 Wireless Connection If you are using a wireless connection, place your player within range of your wireless network. For best wireless reception, avoid enclosing your player in a cabinet. To connect wirelessly, you can use Wi-Fi Protected Setup (WPS), or you can select your network and enter its password using the onscreen setup guide. NeoTV Wireless router If you do not receive a strong signal during the onscreen setup, rotate your player or move it closer to your router. 9 Onscreen Guided Setup On your TV: • Use the re mote control to follow the NeoTV onscreen setup instructions, which include setting the output resolution to the TV, and the standby timing, connecting to a network, and checking for the latest NeoTV software update. • Y our player might download software updates or restart during setup. • Once you complete setup, se lect a channel icon (such as Netflix or Pandora) to enjoy the content. 10 Remote Control Power Select Left Up Right Down Stop Fast forward Rewind Next Home Return Menu Play/Pause Previous 11 Remote Control App NeoTV Remote app turns your iPhone or Android phone into a NeoTV Streaming Player remote control. 1. Using your iPhone or Android smartphone, navigate to the Apple AppStore or Android Market, and search for NeoTV Remote. 2. Install the app on your phone. 3. Make sure that the phone is connected to the sam e WiFi network (SSID) as your NeoTV Streaming Player. 4. Launch the app, and it searches for your device and connects. １２ Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off １３ and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. １４ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT…

Text truncated - open the document above for the full version.

Netgear Incorporated 350 East Plumeria D rive S an Jose C alif ornia U nited Sta te s 95134 Date : 2011-07-27 General Declar ation FCC ID: PY311200164 We, Netgear Incorporated declares that the device does not have “Ad Hoc on non-US frequencies” while applying for the follo wing product. If you have any questions regarding the declaration, please don’t hesitate to contact us. Thank you! Since rely yours, Mark Gandler / project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected] m

Netgear Incorporated 350 East Plumeria D rive S an Jose C alifornia U nited Sta te s 9 5134 Date: 2011-07-27 FCC ID: P Y311200164 To the attention of Federal Communications Commission Authoriz ation and Evaluation Divisi on Confid entialit y Request Pursu ant to Sect ions 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby request s co nfidential treatment of information acco mpanying this Application as outlined below: Schematics Block Diagr am The above materia ls contain trade se cr ets and proprietary information not cu st omarily released to the public. The public disclosu re of these matters might be harmful to the Applicant and provide unjustified benefits to its co mpetitors. The Applicant underst ands that pursu ant to Rule 0.457, disclosu re of this Application and all acc ompanying documentation will not be made before the date of the Grant for this application. Since rely yours, Mark Gandler / project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: mark. [email protected] m

Netgear Incorporated 350 East Plumeria D rive S an Jose C alifornia U nited State s 9 5134 A G E NCY A U T H O R IZAT I O N L E TTER FCC ID: PY311200164 Date: 2011-07-27 To whom it may concern: We, the undersi gned, hereby authorize Bur eau Veritas Consumer Products Services (H.K.) Lt d., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the follo wing matte rs related to the FCC approval of our products: report submittal, related co rresp ondenc e, the si gning of all documents relating to these matte rs, and any other lawful activity necessary to obtain su ch ce rtifica tion. Any act ca rried out by BV CPS Taoyuan within the scope of this authoriz ation shall have the sa me effects as our own. Thank you. Since rely, ____________ ____ ___________ Mark Gandler / project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: mark. [email protected] m

Netgear Incorporated 350 East Plumeria Drive San Jose California United States 95134 Date: 2011-08-19 FCC ID: PY311200164 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to DA 04-1705 of the commission’s public notice, we request short-term confidential treatment for the following information until 2012/02/12 in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, Mark Gandler / Regulatory Compliance Manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

Pantone 200C SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDDATE 01AW-11575-011 of 1 AW, NTV200, V1H1, PLBLR HU 02MAY11R HUINITIAL DOCUMENT CREATION01 Pantone Cool Gray 7C Black NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 7

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC ID: PY311200164 Report No.: RF110614C01 Operational Description This device is a TV Streaming Player, which operates in 2.4GHz band; the maximum data rate could be up to 270Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 270Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 12Vdc AC Adapter. The antenna information is as below: The other instruction, please have a look at the users manual.

Report No.: SA110614C01 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110614C01 MODEL NO.: NTV200 FCC ID: PY311200164 APPLICANT: Netgear Incorporated ADDRESS: 350 East Plumeria Drive San Jose California United States 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement. The test results in the report only apply to the tested sample. Report No.: SA110614C01 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION......................................................................................................4 2. RF EXPOSURE LIMIT..............................................................................................5 3. MPE CALCULATION FORMULA.............................................................................5 4. CLASSIFICATION....................................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...........................6 Report No.: SA110614C01 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110614C01 Original release Aug. 15, 2011 Report No.: SA110614C01 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: Streaming player BRAND NAME: Netgear MODEL NO.: NTV200 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Netgear Corporation STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: NTV200) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 15, 2011 (Claire Kuan, Specialist ) APPROVED BY : , DATE: Aug. 15, 2011 ( May Chen, Deputy Manager ) Report No.: SA110614C01 Report Format Version 4.0.0 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110614C01 Report Format Version 4.0.0 6 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 663.8 1.55 20 0.189 1.00 --- END ---

Report No.: RF110614C01 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110614C01 MODEL NO.: NTV200 FCC ID: PY311200164 RECEIVED: June 14, 2011 TESTED: July 07 to 25, 2011 ISSUED: Aug. 15, 2011 APPLICANT: Netgear Incorporated ADDRESS: 350 East Plumeria Drive San Jose California United States 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 156 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110614C01 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................15 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................16 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................17 4. TEST TYPES AND RESULTS..............................................................................18 4.1 CONDUCTED EMISSION MEASUREMENT........................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................18 4.1.2 TEST INSTRUMENTS..........................................................................................18 4.1.3 TEST PROCEDURES..........................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD.................................................................19 4.1.5 TEST SETUP.......................................................................................................20 4.1.6 EUT OPERATING CONDITIONS.........................................................................20 4.1.7 TEST RESULTS (MODE 1)..................................................................................21 4.1.8 TEST RESULTS (MODE 2)..................................................................................23 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 TEST INSTRUMENTS..........................................................................................26 4.2.3 TEST PROCEDURES..........................................................................................28 4.2.4 DEVIATION FROM TEST STANDARD.................................................................28 4.2.5 TEST SETUP.......................................................................................................29 4.2.6 EUT OPERATING CONDITIONS.........................................................................30 4.2.7 TEST RESULTS...................................................................................................31 4.3 6dB BANDWIDTH MEASUREMENT..................................................................104 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT................................................104 4.3.2 TEST INSTRUMENTS........................................................................................104 4.3.3 TEST PROCEDURE...........................................................................................104 4.3.4 DEVIATION FROM TEST STANDARD...............................................................104 4.3.5 TEST SETUP.....................................................................................................104 4.3.6 EUT OPERATING CONDITIONS.......................................................................104 4.3.7 TEST RESULTS.................................................................................................105 4.4 MAXIMUM PEAK OUTPUT POWER..................................................................115 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...................115 4.4.2 INSTRUMENTS..................................................................................................115 Report No.: RF110614C01 3 Report Format Version 4.0.0 4.4.3 TEST PROCEDURES........................................................................................115 4.4.4 DEVIATION FROM TEST STANDARD...............................................................115 4.4.5 TEST SETUP.....................................................................................................115 4.4.6 EUT OPERATING CONDITIONS.......................................................................115 4.4.7 TEST RESULTS.......................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (MODE 1) 2 CONDUCTED EMISSION TEST (MODE 2) 3 RADIATED EMISSION TEST