PY311300178N300 Wireless Gigabit Router

Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. Package Contents: N300 Wireless Gigabit Router JWNR3000 Installation Guide Power adapter Ethernet cable Step 1: Unplug the power to turn off your modem. Step 2: Connect one end of the blue Ethernet cable to your modem, and the other end to the Internet port on your router. Plug in, then turn on your modem. Step 3: Step 6: Step 4: Connect the power adapter to the router, then plug it into an outlet. If none of the LEDs turn on, make sure that the Power On/Off button is in the ON position (pushed in). Wait until the wireless LED turns solid green. Step 5: Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the bottom label. Open a browser. If the Web page does not display, close and re-open the browser and enter http://routerlogin.net in the address bar, or check the “Troubleshooting” section in the User Guide. Laptop or Desktop Computer N300 Wireless Gigabit Router Modem or Cable Internet DSL Connect the router to your computer. N300 Wireless Gigabit Router Ethernet cable (not included) NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are trademarks or registered trademarks of their respective holders. © 2011 NETGEAR, Inc. All rights reserved. November 2011 Preset Wireless Security This product has a unique Wi-Fi network name (SSID) and network key (password). The default SSID and network key (password) are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset Wi-Fi network name (SSID) and network key (password). If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: Wi-Fi Network Name (SSID) _______________________________ Network Key (Password) _________________________________ If you change the preset wireless settings, record it here: Wireless Network Name (SSID) _______________________________ Network Key (Password) _____________________________________ If necessary to retrieve or update your password, type http://www.routerlogin.net in a Web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product, and use it to register your product at http://www.NETGEAR.com/register. Registration is required so you can use our telephone support service. Also go to http://support.netgear.com for product updates, additional documentation, and support. For the free Live Parental Controls centralized Internet site filtering software for your router, download from: http://www.netgear.com/lpc. For additional features, including Traffic Metering and Guest Access, log in to your router at: http://routerlogin.net. For complete DoC, go to the NETGEAR EU Declarations of Conformity website at http://support.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, go to http://support.netgear.com/app/answers/detail/a_id/2649. WARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on carpets. Make sure your equipment is surrounded by at least 2 inches of air space. Internet STATUS GOOD Network Map Number of devices 16 Parental Controls WiFi Connection STATUS Connected Router Settings Click here ReadySHARE Click here Click here Download the free Desktop NETGEAR Genie Automatically fix common network problems and easily manage your home network connections. http://www.NETGEAR.com/genie 2006/8/16 v1.0 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including in…

Text truncated - open the document above for the full version.

Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134 TEL: 408-907-8000 FAX: 408-907-8097 Declaration for no non-US channel operation January 17, 2012 We, Netgear Inc., declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: PY311300178 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Mark Gandler / project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

FCC ID: PY311300178 Date: 2012-01-17 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block diagram Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ------------------------------------------------- Mark Gandler/ project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected] Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134

Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134 AUTHORIZATION LETTER FCC ID: PY311300178 Date:2012/2/3 To whom it may concern: We, the undersigned UNetgear Inc.U hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part15C and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------- Mark Gandler / project manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

Page 1/1

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDDATE 01AW-11790-021 of 1 AW, JNR3000, V1H1, PLBLR HU 03JAN12R HUINITIAL DOCUMENT CREATION01 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. SSID & SERIAL MAC NUMBERS, MANUFACTURE DATE TO BE PRINTED BY THE ODM. MANUFACTURE DATE AT THE FORMAT OF MM/YYYY 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A Pantone Cool Grey 11C White Pantone 285C Pantone 114C Pantone 200C 7

Page 6 Page 7 Page 8 Page 9 Page 10

Report No.: SA111214C07 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA111214C07 MODEL NO.: JNR3000 FCC ID: PY311300178 RECEIVED: Dec. 07, 2011 TESTED: Dec. 28, 2011 ~ Jan. 09, 2012 ISSUED: Jan. 12, 2012 APPLICANT: Netgear Incorporated ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 U.S.A ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 p ages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certif ication, approval, or endorsement by any g overnment agency. The test results in the report only apply to the tested sample. Report No.: SA111214C07 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................3 1. CERTIFICATION .............................................................................................................4 2. RF EXPOSURE...............................................................................................................5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE).........................................5 2.2 MPE CALCULATION FORMULA ....................................................................................5 2.3 CLASSIFICATION...........................................................................................................5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER..................................5 Report No.: SA111214C07 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Jan. 12, 2012 Report No.: SA111214C07 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: N300 Wireless Gigabit Router MODEL: JNR3000 BRAND: NETGEAR APPLICANT: Netgear Incorporated TESTED: Dec. 28, 2011 ~ Jan. 09, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: JNR3000) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, dat a evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’ s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jan. 12, 2012 Andrea Hsia / Specialist APPROVED BY : , DATE:Jan. 12, 2012 Gary Chang / Technical Manager Report No.: SA111214C07 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 27.4 3.89 20 0.268 1

Report No.: RF111214C07 1 Report Format Version 4.1.0 FCC TEST REPORT REPORT NO.: RF111214C07 MODEL NO.: JNR3000 FCC ID: PY311300178 RECEIVED: Dec. 07, 2011 TESTED: Dec. 28, 2011 ~ Jan. 09, 2012 ISSUED: Jan. 12, 2012 APPLICANT: Netgear Incorporated ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 U.S.A ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 60 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF111214C07 2 Report Format Version 4.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.........................................................................................4 1. CERTIFICATION......................................................................................................5 2. SUMMARY OF TEST RESULTS .............................................................................6 2.1 MEASUREMENT UNCERTAINTY ..........................................................................6 3. GENERAL INFORMATION ......................................................................................7 3.1 GENERAL DESCRIPTION OF EUT........................................................................7 3.2 DESCRIPTION OF TEST MODES..........................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .....................................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................9 4. TEST TYPES AND RESULTS ...............................................................................13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT................................13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............13 4.1.2 TEST INSTRUMENTS ..........................................................................................14 4.1.3 TEST PROCEDURES ...........................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD .................................................................15 4.1.5 TEST SETUP ........................................................................................................16 4.1.6 EUT OPERATING CONDITIONS ..........................................................................16 4.1.7 TEST RESULTS ....................................................................................................17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................36 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................36 4.2.2 TEST INSTRUMENTS ..........................................................................................36 4.2.3 TEST PROCEDURES ...........................................................................................37 4.2.4 DEVIATION FROM TEST STANDARD .................................................................37 4.2.5 TEST SETUP ........................................................................................................38 4.2.6 EUT OPERATING CONDITIONS ..........................................................................38 4.2.7 TEST RESULTS ....................................................................................................39 4.3 6dB BANDWIDTH MEASUREMENT ....................................................................41 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ..................................................41 4.3.2 TEST SETUP ........................................................................................................41 4.3.3 TEST INSTRUMENTS ..........................................................................................41 4.3.4 TEST PROCEDURE .............................................................................................41 4.3.5 DEVIATION FROM TEST STANDARD .................................................................41 4.3.6 EUT OPERATING CONDITIONS ..........................................................................41 4.3.7 TEST RESULTS ....................................................................................................42 4.4 CONDUCTED OUTPUT POWER .........................................................................44 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ..........................44 4.4.2 TEST SETUP ........................................................................................................44 4.4.3 TEST INSTRUMENTS ..........................................................................................44 4.4.4 TEST PROCEDURES ...........................................................................................44 4.4.5 DEVIATION FROM TEST STANDARD .................................................................44 4.4.6 EUT OPERATING CONDITIONS ..........................................................................44 4.4.7 TEST RESULTS ....................................................................................................45 4.5 POWER SPECTRAL DENSITY MEASUREMENT................................................47 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .............................47 4.5.2 TEST SETUP ................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST