PY311400179N900 Wireless Dual Band Gigabit Router

350 East Plumeria Drive San Jose, CA 95134 USA August 2012 202-TBD v1.0 Centria WNDR4700/WNDR4720 User Manual This manual is for certification purposes only. The art, screen captures, and descriptions might vary from the actual device. 2 Centria WNDR4700/WNDR4720 ©2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See support information card. Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © 2011 NETGEAR, Inc. All rights reserved. Statement of Conditions To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use, or application of, the product(s) or circuit layout(s) described herein. 3 Contents Chapter 1 Hardware Setup Unpack Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Position Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front and Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Install an HDD (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Format the HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Remove a Hard Disk Drive (HDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Chapter 2 Getting Started with NETGEAR genie Router Setup Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Use Standard TCP/IP Properties for DHCP . . . . . . . . . . . . . . . . . . . . . . 15 Gather ISP Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Wireless Devices and Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . 15 Types of Logins and Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 NETGEAR genie Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Use NETGEAR genie after Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Upgrade Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Router Dashboard (Basic Home Screen) . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Join the Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Manual Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Wi-Fi Protected Setup (WPS) Method . . . . . . . . . . . . . . . . . . . . . . . . . . 19 NETGEAR genie App and Mobile genie App . . . . . . . . . . . . . . . . . . . . . . . 20 Chapter 3 genie Basic Settings Internet Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Internet Setup Screen Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Attached Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 ReadySHARE USB Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . eadySHARE Cloud28 Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Wireless Setup Screen Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Change WPA Security Option and Passphrase . . . . . . . . . . . . . . . . . . . 30 Guest Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Guest Network Wireless Security Options . . . . . . . . . . . . . . . . . . . . . . . 32 4 Centria WNDR4700/WNDR4720 Chapter 4 genie Advanced Home Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 WPS Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 WAN Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Default DMZ Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Change the MTU Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 LAN Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 LAN Setup Screen Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Use the Router as a DHCP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Address Reservation . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134 Date: 2012-07-25 General Declaration General Declaration General Declaration General Declaration We, Netgear Inc. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: PY311400179 If you have any questions regarding the declaration, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------- Mark Gandler/ Regulatory Compliance Manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

FCC ID: PY311400179 Date: 2012-07-25 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ------------------------------------------------- Mark Gandler/ Regulatory Compliance Manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected] Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134

Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134 AUTHORIZATION LETTER FCC ID: PY311400179 Date:2012/7/25 To whom it may concern: We, the undersigned UNetgear Inc.U hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part15C/15E and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------- Mark Gandler/ Regulatory Compliance Manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

Netgear Inc. 350 East Plumeria Drive San Jose, CA 95134 October 23, 2012 D E C L A R A T I O N L E T T E R Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY311400179 Due to the marketing time change, we would like to request STC on following 4 exhibits on FCC ID: PY311400179 to protect sensitive business information. External photos Test Setup photos User ’s manual Internal Photos We acknowledge that we are aware of these exhibits already been made public since the product was granted on 08/13/2012 until now. Could you please kindly help us to re- secure the exhibits mentioned above until 02/08/2013. Thank you and we appreciate your help. ------------------------------------------------- Mark Gandler/ Regulatory Compliance Manager Netgear Inc. TEL.: 408-907-8000 FAX: 408-907-8097 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDDATE 03AW-11756-011 of 1 AW, WNDR4700, PLBLT TSAO 09NOV11T TSAOINITIAL DOCUMENT CREATION01 Pantone 877C Black White NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 22FEB12T TSAOSIZE MODIFICATION02 7 20APR12T TSAOUPDATE03

Page 6        Page 7        Page 8        Page 9        Page 10        Page 11        Page 12        Page 13        Page 14        Page 15        Page 16        Page 17        Page 18       

FCC ID: PY311400179 Report No.: RF 120712C20 Operational Description This device is a N900 Wireless Dual Band Gigabit Router, which operates in both of 5GHz and 2.4GHz bands; the maximum data rate could be up to450Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 450Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 12Vdc form power adapter. The device is used Off board PCB dipole antenna with UFL antenna connector. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA120712C20 of 6 Report Format Version 5.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA120712C20 MODEL NO.: WNDR4700, WNDR4720 FCC ID: PY311400179 RECEIVED: Jul. 12, 2012 TESTED: Jul. 18 ~ Jul. 23, 2012 ISSUED: Jul. 26, 2012 APPLICANT: NETGEAR, INC. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA120712C20 of 6 Report Format Version 5.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA120712C20 of 6 Report Format Version 5.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120712C20 Original release Jul. 26, 2012 Report No.: SA120712C20 of 6 Report Format Version 5.0.0 4 1. CERTIFICATION PRODUCT: N900 Wireless Dual Band Gigabit Router MODEL NO.: WNDR4700, WNDR4720 BRAND: NETGEAR APPLICANT: NETGEAR, INC. TESTED: Jul. 18 ~ Jul. 23, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: WNDR4700) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jul. 26, 2012 Andrea Hsia / Specialist APPROVED BY : , DATE :Jul. 26, 2012 Gary Chang / Technical Manager Report No.: SA120712C20 of 6 Report Format Version 5.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 22cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120712C20 of 6 Report Format Version 5.0.0 6 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 27.79 6.8 22 0.473 1 5180-5240 15.01 7.8 22 0.031 1 5745-5825 26.87 7.8 22 0.482 1 NOTE: FOR 2.4GHz: Directional gain = 2dBi + 10log(3) = 6.8dBi FOR 5.0GHz: Directional gain = 3dBi + 10log(3) = 7.8dBi CONCULSION: Only 2.4 and 5GHz can transmit simultaneously, 2.4 and 2.4GHz does not. The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN 2.4G + WLAN 5.0G = 0.473 + 0.482 = 0.955 Therefore, the maximum calculation of this situation is 0.955, which is less than the “1” limit.

Report No.: RF120712C20 1 of 80 Report Format Version 5.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF120712C20 MODEL NO.: WNDR4700 (refer to item 3.1 for more detail) FCC ID: PY311400179 RECEIVED: Jul. 12, 2012 TESTED: Jul. 18 ~ Jul. 23, 2012 ISSUED: Jul. 26, 2012 APPLICANT: NETGEAR, INC. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120712C20 2 of 80 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 5 1. CERTIFICATION .......................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 8 3.2 DESCRIPTION OF TEST MODES ............................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................ 11 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 16 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 16 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................ 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 17 4.1.2 TEST INSTRUMENTS ............................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 19 4.1.5 TEST SETUP ............................................................................................................. 20 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 20 4.1.7 TEST RESULTS ........................................................................................................ 21 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 34 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 34 4.2.2 TEST INSTRUMENTS ............................................................................................... 34 4.2.3 TEST PROCEDURES ............................................................................................... 35 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 35 4.2.5 TEST SETUP ............................................................................................................. 35 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 35 4.2.7 TEST RESULTS ........................................................................................................ 36 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 38 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 38 4.3.2 TEST SETUP ............................................................................................................. 38 4.3.3 TEST INSTRUMENTS ............................................................................................... 38 4.3.4 TEST PROCEDURE .................................................................................................. 38 4.3.5 DEVIATION FROM TEST STANDARD...................................................................... 38 4.3.6 EUT OPERATING CONDITIONS .............................................................................. 38 4.3.7 TE…

Text truncated - open the document above for the full version.

Report No.: RF120712C20-1 1 of 46 Report Format Version 5.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF120712C20-1 MODEL NO.: WNDR4700 (refer to item 3.1 for more detail) FCC ID: PY311400179 RECEIVED: Jul. 12, 2012 TESTED: Jul. 18 ~ Jul. 23, 2012 ISSUED: Jul. 26, 2012 APPLICANT: NETGEAR, INC. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120712C20-1 2 of 46 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ............................................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 13 4. TEST TYPES AND RESULTS .................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 14 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 14 4.1.3 TEST INSTRUMENTS ................................................................................................ 15 4.1.4 TEST PROCEDURES ................................................................................................ 16 4.1.5 DEVIATION FROM TEST STANDARD ...................................................................... 16 4.1.6 TEST SETUP .............................................................................................................. 17 4.1.7 EUT OPERATING CONDITION .................................................................................. 17 4.1.8 TEST RESULTS ......................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 27 4.2.2 TEST INSTRUMENTS ................................................................................................ 27 4.2.3 TEST PROCEDURES ................................................................................................ 28 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 28 4.2.5 TEST SETUP .............................................................................................................. 28 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 28 4.2.7 TEST RESULTS ......................................................................................................... 29 4.3 PEAK TRANSMIT POWER MEASUREMENT ........................................................... 31 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT ......................................... 31 4.3.2 TEST SETUP .............................................................................................................. 31 4.3.3 TEST INSTRUMENTS ................................................................................................ 31 4.3.4 TEST PROCEDURE .................................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST