PY313200227R6300 Smart WiFi Router, AC1450 Smart WiFi Router

R6300v2 S m a r t WiFi Router U s e r M an u al 350 East Plumeria Drive San Jose, CA 95134 USA R6300 WiFi Router 802.11ac Dual Band Gigabit 2 ©2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See support information card. Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © 2012 NETGEAR, Inc. All rights reserved. Statement of Conditions To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use, or application of, the product(s) or circuit layout(s) described herein. R6300 WiFi Router 802.11ac Dual Band Gigabit 3 7 1 1. Hardware Setup Ge t ti n g t o kn o w y o ur r o u t e r The NETGEAR R6300 WiFi Router delivers next-generation WiFi at gigabit speeds. It offers the ultimate mobility for WiFi devices with speeds up to three times faster than 802.11n. Compatible with next-generation WiFi devices, and backward compatible with 802.11 a/b/g and n devices, it enables HD streaming throughout your home. The R6300 with simultaneous dual-band WiFi technology offers speeds up to 450 1 to 1300 2 Mbps and avoids interference, ensuring top WiFi speeds and reliable connections. This makes it ideal for larger homes with multiple devices. In addition, four Gigabit Ethernet ports offer ultra-fast wired connections. Wirelessly access and share a USB hard drive and USB printer using the two USB 2.0 ports. If you already set up your router, you can skip this chapter. If you have not done that yet, this chapter covers the hardware setup. Chapter 3, genie Basic Settings, explains how to set up your Internet connection. This chapter contains the following sections: • Unpack Your Router • Position Your Router • Hardware Features For information about ReadySHARE features in your product, see Chapter 5, USB Storage, and www.netgear.com/readyshare. The NETGEAR genie® app provides easy installation from an iPad, tablet, computer, or smartphone. It includes a personal dashboard, allowing you to manage, monitor, and repair your home network. NETGEAR customers can download the app at www.netgear.com/genie or from the Google Play or App Store. For more information about the topics covered in this manual, visit the Support website at http://support.netgear.com. 1. Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate and wireless coverage. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards. 802.11ac 1300 Mbps is approximately 3x faster than 802.11n 450 Mbps. 2. Up to 1300 Mbps wireless speeds achieved when connecting to other 802.11ac 1300 Mbps devices. Hardware Setup 8 Unpack Your Router Open the box and remove the router, cables, and installation guide. Ethernet cable Power adapter Dual Band WiFi Router Power cord Figure 1. Check the package contents Your box contains the following items: • R6300 smart WiFi Router • AC power adapter and power cord (plug varies by region) • Category 5 (Cat 5) Ethernet cable • Installation guide with cabling and router setup instructions If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton and original packing materials, in case you need to return the product for repair. Position Your Router The router lets you access your network from virtually anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal passes through can limit the range. For best results, place your router: • Near the center of the area where your computers and other devices operate, and preferably within line of sight to your wireless devices. • So it is accessible to an AC power outlet and near Ethernet cables for wired computers. Hardware Setup 9 • In an elevated location such as a high shelf, keeping the number of walls and ceilings between the router and your other devices to a minimum. • Away from electrical devices that are potential sources of interference. Equipment that might cause interference includes ceiling fans, home security systems, microwaves, computers, the base of a cordless phone, or 2.4 GHz cordless phone. • Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete can also affect your wireless signal. When you use multiple access points, it is better if adjacent access points use different radio frequency channels to reduce interference. The recommended channel spacing between adjacent access points is five channels (for example, use Channels 1 and 6, or 6 and 11). Hardware Features Before you cable your router, take a moment to become familiar with the front, side, and back panels and the label.…

Text truncated - open the document above for the full version.

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 408-890-3530 / Fax: 408-907-8097 Power of Attorney Date: 2013/3/21 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: NETGEAR / R6300v2, AC1450 FCC ID: PY313200227 Product name: R6300 Smart WiFi Router, AC1450 Smart WiFi Router FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : _____________________________ Job Title and Dept. : M.Abrishamcar / Regulatory Complinace Manager E-Mail : [email protected] Tel. : 408-890-3530

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 408-890-3530 / Fax: 408-907-8097 Date: 2013/3/21 Confidential Letter Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID：PY313200227 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent NETGEAR, Inc. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.457 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : _____________________________ Job Title and Dept. : M.Abrishamcar / Regulatory Complinace Manager E-Mail : [email protected] Tel. : 408-890-3530

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 408-890-3530 / Fax: 408-907-8097 DoC Attestation Letter Date: 2013/3/21 We NETGEAR, Inc., as the grantee of this project (FCC ID: PY313200227 / Brand Name: NETGEAR / Model No.: R6300v2, AC1450), would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures (Sproton report No.: FD330853, FCC Test Firm Registration No.: 187376). The final product shall consequently comply with the FCC rule applied for DoC Procedure. Regards, FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : _____________________________ Job Title and Dept. : M.Abrishamcar / Regulatory Complinace Manager E-Mail : [email protected] Tel. : 408-890-3530

Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 1 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Photographs of EUT Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 2 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 3 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 4 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 5 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 6 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 7 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 8 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 9 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255 Report No.: 330853 SPORTON International Inc. PAGE NUMBER : 10 OF 10 TEL : 886-2-2696-2468 ISSUED DATE : Mar. 21, 2013 FAX : 886-2-2696-2255

Report No.: FR330853 FCC ID: PY313200227 Page No. : B1 of B3 Appendix B. Maximum Permissible Exposure Report No.: FR330853 FCC ID: PY313200227 Page No. : B2 of B3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR330853 FCC ID: PY313200227 Page No. : B3 of B3 1.3. Calculated Result and Limit For 5GHz UNII Band: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11ac MCS0 VHT 40MHz: 16.73 dBm Directional Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 5.56 3.5967 16.7320 47.1197 0.033733 1 Complies Note: Directional gain=GANT+10log(NANT/Nss) =5.56dBi <6dBi, so the limit doesn’t reduce. For 5GHz ISM Band: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11ac MCS0 VHT 80MHz: 29.83 dBm Directional Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 5.56 3.5967 29.8290 961.3827 0.688248 1 Complies Note: Directional gain=GANT+10log(NANT/Nss) =5.56dBi <6dBi, so the limit doesn’t reduce. For 2.4GHz Band: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11b: 28.13 dBm Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.30 1.6982 28.1315 650.3469 0.219834 1 Complies CONCULSION: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can transmit simultaneously, the formula of calculatedthe MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.219834 / 1 + 0.688248 / 1 = 0.908082, which isless than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: FR330853 FCC ID: PY313200227 Page No. : C1 of C3 Appendix C. Co-location Report No.: FR330853 FCC ID: PY313200227 Page No. : C2 of C3 1. Results of Radiated Emissions for Co-located Temperature 26°C Humidity 60% Test Engineer David Tseng Configurations EUT with Adapter 1 Horizontal Report No.: FR330853 FCC ID: PY313200227 Page No. : C3 of C3 Vertial

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company NETGEAR, Inc. Applicant Address 350 East Plumeria Drive, San Jose, California 95134, USA FCC ID PY313200227 Manufacturer’s company Ambit Microsystems (Shanghai) Ltd. Manufacturer Address No. 1925, Nanle Road, Songjiang Export Processing Zone, Shanghai, China Product Name R6300 Smart WiFi Router, AC1450 Smart WiFi Router Brand Name NETGEAR Model Name R6300v2, AC1450 Test Rule Part(s) 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz / 5725 ~ 5850MHz Received Date Jan. 06, 2013 Final Test Date Mar. 09, 2013 Submission Type Original Equipment Statement Test result included is only for the IEEE 802.11n, IEEE 802.11b/g part and IEEE 802.11a/ac (5725 ~ 5850MHz) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v02 and KDB 662911 D01 v01r02. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR330853AB Report Format Version: 01 Page No. : i of ii FCC ID: PY313200227 Issued Date :Mar. 25, 2013 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION..................................................................................................................................... 3 3.1. Product Details ........................................................................................................................................................................................... 3 3.2. Accessories ................................................................................................................................................................................................. 6 3.3. Table for Filed Antenna ............................................................................................................................................................................. 7 3.4. Table for Carrier Frequencies ................................................................................................................................................................... 8 3.5. Table for Test Modes .................................................................................................................................................................................. 9 3.6. Table for Testing Locations...................................................................................................................................................................... 11 3.7. Table for Multiple Listing .......................................................................................................................................................................... 11 3.8. Table for Supporting Units ....................................................................................................................................................................... 11 3.9. Table for Parameters of Test Software Setting ..................................................................................................................................... 12 3.10. EUT Operation during Test ....................................................................................................................................................................... 13 3.11. Duty Cycle................................................................................................................................................................................................. 14 3.12. Test Configurations................................................................................................................................................................................... 19 4. TEST RESULT......................................................................................................................................................... 23 4.1. AC Power Line Conducted Emissions Measurement ......................................................................................................................... 23 4.2. Maximum Conducted Output Power Measurement......................................................................................................................... 27 4.3. Power Spectral Density Measurement.................................................................................................................................................. 31 4.4. 6dB Spectrum Bandwidth Measurement ............................................................................................................................................. 40 4.5. Radiated Emissions Measurement......................................................................................................................................................... 48 4.6. Emissions Measurement........................................................................................................................................................................... 75 4.7. Antenna Requirements ....................................................................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: FR330853 FCC ID: PY313200227 Page No. : A1 of A5 Appendix A. Test Photos Report No.: FR330853 FCC ID: PY313200227 Page No. : A2 of A5 1. Photographs of Conducted Emissions Test Configuration Test Mode: Mode 1. FRONT VIEW REAR VIEW Report No.: FR330853 FCC ID: PY313200227 Page No. : A3 of A5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR330853 FCC ID: PY313200227 Page No. : A4 of A5 Test Configuration: 30 MHz ~ 1 GHz / Test Mode: Mode 1 FRONT VIEW REAR VIEW Report No.: FR330853 FCC ID: PY313200227 Page No. : A5 of A5 Test Configuration: Above 1 GHz / Test Mode: Mode 1 FRONT VIEW REAR VIEW