PY314100252Wireless Cable Data Gateway

Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:  Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use.  Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways.  Fuses should only be installed by service personnel.  NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe – EU Declaration of Conformity This section applies to products bearing the CE or CE! mark: Products bearing the CE or CE! mark comply with the following EU directives:  EMC Directive 2004/108/EC  Low Voltage Directive 2006/95/EC  Ecodesign Directive 2009/125/EC  RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:  R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed iformation concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ ) The following paragraphs apply to WN2500RP: This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement): FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:  C6300  GS608v4  WN3000RPv2  D6000  HMNC100  WN3500RP  D6010  JNR1010v2  WNDR3400v3  D3600  JR6150  WNDR3700v5  D3610  JWNR2000v5  WN3000RPv2  D6200V2  JWNR2010v5  WN3500RP  EX2700  R6050  WNDR3400v3  EX6100  R6200v3  WN1000v4  EX6200  R6220  WNR2010  FS205v2  R7500  WNR2020  FS605v4  R8000  WNR614  GS205v2  STS7000  WNR618  GS208v2  VEGN2200  VMB3000  GS305  WN370  VMC3010  GS308v2  WN2500RP  VMC3030  GS605v5  WN2500RP This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. FCC Guidelines for Human Exposure The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. The following statement applies to this product:  C6300XB3 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 25cm between the radiator and your body. The following statement applies to this product:  R8000 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 30cm between the radiator and your body. FCC Declaration of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that this product complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions:  The device may not cause harmful interference, and  The device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instr…

Text truncated - open the document above for the full version.

DOCSS 3.0 AC1900 Voice Gateway with MoCA 2.0 The NETGEAR Difference AC1900 WiFi speeds plus Beamforming+ for a stronger connection to each device The new NETGEAR DOCSIS® 3.0 AC1900 Voice Gateway with MoCA 2.0 (C7000BMX), gives service providers the ultimate MoCA experience for their subscribers with Beamforming+ for a better, stronger connection and incredibly fast streaming and gaming with minimized buffering and interruptions. The NETGEAR C7000BMX raises the bar with its incredibly fast WiFi giving service provider’s subscribers the power to connect to all of their smartphones, tablets and mobile devices faster than ever before. Built-in NETGEAR genie® offers end-users complete access and management of their home network, resulting in fewer technical support calls. NETGEAR Enhanced Support Tools offer easy troubleshooting for cable operators providing unprecedented visibility and diagnostic tools to ensure carrier-grade voice services. • 11ac ultra-fast cable Internet speeds up to 1 Gbps with NETGEAR Beamforming+ for expanded coverage and a better WiFi connection • NETGEAR genie® application for simplified home network management • Enhanced support tools with TR-069, SNMP and genie app • Hotspot/WiFi offload support using GRE soft tunnel • ReadyShare USB hard drive access through local network • Live parental controls • MoCA 2.0 for in home video and data distribution over Coax Benefits • 11ac AC1900 WiFi – 600+1300 Mbps † speeds • Up to 1 Gig DOCSIS download speed with 24 bonded channels • Explicit and implicit Beamforming+ for improved WiFi range and performance even for legacy devices that do not have 11ac built-in • High powered amplifiers and antennas to extend WiFi coverage • Upstream and downstream advanced Quality of Service (QoS) for best gaming and video streaming experience • Integrated 4-port Gigabit Ethernet switch • Next generation of HD voice with PacketCable 2.0 • Integrated MoCA 2.0 for high speed IP video connectivity Ease of Use • Installation and management is simple and easy with Push ‘N’ Connect and NETGEAR genie app • Push ‘N’ Connect (WPS) makes installation easy with the push of a button • NETGEAR genie has a host a features to give end-users ultimate access and control of their network: – Turbo Transfer: Share files within home network between PC, MAC or Android – Home network management – MyMedia: Find and play media files from network – Guest Network and EZ Mobile Connect: Separate and secure access for guests; scan QR code to connect guests to the network • Internal Power Supply with battery backup option C7000BMX Data Sheet - Preliminary C7000BMX Data Sheet Self-Install No-Click Training FW Upgrade DOCSIS, SNMP & TR-069 Remote Care TR-069 ACS (multiple vendors) TR-069/ DOCSIS/ SNMP InstallationPost-Installation TR-069/ DOCSIS Self-Care Integrated Gateway Tools genie Assisted Care Optional: NETGEAR Support Center DUAL BAND 1900 ReadyShare USBBeamforming+ DLNAWPS Data Sheet DOCSS 3.0 AC1900 Voice Gateway with MoCA 2.0 C7000BMX Technical Specifications System Requirements • Cable broadband Internet service • Microsoft® Windows® 7, 8, Vista®, Mac OS®, or other operating systems running a TCP/IP network • Microsoft® Internet Explorer® 9.0, Firefox® 2.0, Safari® 1.4, or Google Chrome™ 11.0 browsers or higher • Use laptop with 3x3 450 Mbps adapter like Centrino® 6300/5300 for maximum performance • Use with an 802.11ac adapter like NETGEAR A6200 for maximum performance Physical Interfaces • 1: USB 2.0 port • 1: Coaxial port for cable Internet • 2: Voice ports • 4: Gigabit Ethernet ports with auto-sensing technology • MoCA 2.0 • Battery slot Security • WPA/WPA2 – PSK • SPI and NAT firewall • Denial-of-Service (DoS) attack prevention • WPS Power • 12V/3.5A • Internal power supply Environmental Specifications • Operating Temperature: 5–40 ºC • RoHS/REACH/WEEE Compliant Network Management • Remote GUI Management • Genie® GUI Management • uPnP • DLNA • Port forwarding/Port Triggering • DHCP Server LEDs • Power • DS/US • ONLINE • Telephony • 2.4GHz • 5GHz • WPS • WiFi Ease-of-use • NETGEAR genie for PCs, iPad, tablets, MacBook Air, and smartphones • Push ‘N’ Connect using WiFi Protected Setup® (WPS) Advanced Features • 24x8 3.0 Modem • Download and upload speeds up to 960 Mbps-1.2 Gbps • IPv6 • Simultaneous dual-band WiFi • WiFi Transmitters/Receivers (Tx/Rx)- 3x3 (2.4GHz) + 3x3 (5GHz) • WiFi Boost with high-powered radio amplifiers • Advanced QoS • Four Gigabit Ethernet ports NETGEAR Green Features • Wireless On/Off button • 80% recycled packaging • CEC (California Efficiency) • RoHS • WEEE • REACH Package Contents • C7000BMX cable gateway • Ethernet cable • Quick install guide NETGEAR and the NETGEAR logo are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/ or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. © 2014 NETGEAR, Inc. All rights reserved.D-C7000BMX-1 † Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate and wireless coverage. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards. 802.11ac 1300 Mbps is approximately 3x faster than 802.11n 450 Mbps. 2.4GHz Performance Mode requires 256 QAM support on WiFi client. Up to 1300 Mbps wireless speeds achieved when connecting to other 802.11ac 1300 Mbps devices.

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408 890 3657 Fax: 408 907 8097 Declaration for no non-US channel operation September 29, 2014 We, Netgear INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non- US channels in all the operational mode(s) for the following product. FCC ID: PY314100252 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408 890 3657 Fax: 408 907 8097 Date: 2014-09-29 FCC ID: PY314100252 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Software Operational Description Operational Description (If client need) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408 890 3657 Fax: 408 907 8097 Date: 2014-09-29 FCC ID: PY314100252 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned, hereby authorize Andrea Hsia / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC15C/E application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

Report No.: 140812C13 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 140812C13 Page 2 Report No.: 140812C13 Page 19

2014/09/23 Anna Anna 1510-1MRB000 AW-12985-02 NOTES: 1: LABEL PRINTED BLACK WITH WHITE BACKGROUND. 2: BARCODE MUST BE IN EXACT SEQUENCE AS SHOWN IN DIAGRAM AND DISPLAY CORRESPONDING ALPHA-NUMBERIC TEXT. 3: ALL BAR CODES MUST NOT BE SMALLER THAN 1/8 INCH HIGH. 4: THE BAR CODE LIST FONT MUST NOT BE SMALLER THAN 10PT AND DIRECTL Y BELOW THE BAR CODE. 5: ALL PRINTED LETTERS MUST BE IN UPPER CASE 6: ALL BAR CODES MUST BE PRINTED IN 128 HEX DECIMAL ENCODED BAR CODE PROTOCOL AND THE FORMAT THAT CAN BE READ BY COMCAST SCANNERS 7: LABEL MATERAIL 0.14MM PET WHITE. 3M #467 (OR EQUIVALLENT) ADHESIVE AT BACK. PRODUCT LABEL C7000BMX R3 Sujing 2014/9/23 1510-1KRL000,Label2 1 Black PANT ONE YELLOW C 79 mm 116.43 mm

Report No.: 140812C13 Page 3 Report No.: 140812C13 Page 4 Rev. 1.0 Report No.: 140812C13 Page 5 Rev. 1.0 Report No.: 140812C13 Page 6 Report No.: 140812C13 Page 7 Report No.: 140812C13 Page 8 Report No.: 140812C13 Page 9 Report No.: 140812C13 Page 10 Report No.: 140812C13 Page 11 Report No.: 140812C13 Page 12 Report No.: 140812C13 Page 13 Report No.: 140812C13 Page 14 Report No.: 140812C13 Page 15 Report No.: 140812C13 Page 16 Report No.: 140812C13 Page 17 Report No.: 140812C13 Page 18

Report No.: SA140812C13 1 of 9 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA140812C13 TEST MODEL: C7000BMX SERIES MODEL: C7000BMy-zzzzzz with this note “Where y = X if battery is used, and zzzzzz = a different service provider in the same/different country. FCC ID: PY314100252 RECEIVED: Aug. 12, 2014 TESTED: Sep. 19, 2014 ISSUED: Dec. 10, 2014 APPLICANT: NETGEAR INC. ADDRESS: 350 East Plumeria Drive, San Jose CA 96134, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140812C13 2 of 9 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 7 Report No.: SA140812C13 3 of 9 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140812C13 Original release Dec. 10, 2014 Report No.: SA140812C13 5 of 9 Report Format Version 5.0.1 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 25cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140812C13 6 of 9 Report Format Version 5.0.1 5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table: 2.4GHz antenna No. Transmitter Circuit Gain (dBi) (Include cable loss) Frequency range (GHz to GHz) Antenna Type Connecter Type 1 0 2.07 2.4~2.4835 PIFA i-pex(MHF) 2 1 2.07 2.4~2.4835 PIFA i-pex(MHF) 3 2 2.07 2.4~2.4835 PIFA i-pex(MHF) 5GHz antenna No. Transmitter Circuit Gain (dBi) (Include cable loss) Frequency range (GHz to GHz) Antenna Type Connecter Type 4 0 3.33 5.15~5.25 PIFA i-pex(MHF) 3.32 5.25~5.35 PIFA i-pex(MHF) 3.29 5.47~5.725 PIFA i-pex(MHF) 3.28 5.725~5.850 PIFA i-pex(MHF) 5 1 3.33 5.15~5.25 PIFA i-pex(MHF) 3.32 5.25~5.35 PIFA i-pex(MHF) 3.29 5.47~5.725 PIFA i-pex(MHF) 3.28 5.725~5.850 PIFA i-pex(MHF) 6 2 3.33 5.15~5.25 PIFA i-pex(MHF) 3.32 5.25~5.35 PIFA i-pex(MHF) 3.29 5.47~5.725 PIFA i-pex(MHF) 3.28 5.725~5.850 PIFA i-pex(MHF) Report No.: SA140812C13 7 of 9 Report Format Version 5.0.1 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) 802.11b FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 713.576 6.84 25 0.43888 1.00 NOTE: Directional gain = 2.07dBi + 10log(3) = 6.84dBi 802.11g FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 596.785 6.84 25 0.36705 1.00 NOTE: Directional gain = 2.07dBi + 10log(3) = 6.84dBi 802.11n (HT20) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 582.197 6.84 25 0.35808 1.00 NOTE: Directional gain = 2.07dBi + 10log(3) = 6.84dBi 802.11n (HT40) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2422 - 2452 172.399 6.84 25 0.10603 1.00 NOTE: Directio…

Text truncated - open the document above for the full version.

Report No.: RF140812C13 1 of 66 Report Format Version 5.2.1 FCC TEST REPORT(15.247) REPORT NO.: RF140812C13 TEST MODEL: C7000BMX SERIES MODEL: C7000BMy-zzzzzz with this note “Where y = X if battery is used, and zzzzzz = a different service provider in the same/different country. FCC ID: PY314100252 RECEIVED: Aug. 12, 2014 TESTED: Sep. 17 to 19, 2014 ISSUED: Dec. 10, 2014 APPLICANT: NETGEAR INC. ADDRESS: 350 East Plumeria Drive, San Jose CA 96134, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140812C13 2 of 66 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................... 11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 12 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 14 3.4 DUTY CYCLE OF TEST SIGNAL ........................................................................... 15 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 16 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 17 4. TEST TYPES AND RESULTS ................................................................................ 18 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 18 4.1.2 TEST INSTRUMENTS ........................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................ 19 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 19 4.1.5 TEST SETUP ......................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 20 4.1.7 TEST RESULTS ..................................................................................................... 21 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 23 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 23 4.2.2 TEST INSTRUMENTS ........................................................................................... 24 4.2.3 TEST PROCEDURES ............................................................................................ 25 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 25 4.2.5 TEST SETUP ......................................................................................................... 26 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 26 4.2.7 TEST RESULTS ..................................................................................................... 27 4.3 6dB BANDWIDTH MEASUREMENT ..................................................................... 40 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ................................................... 40 4.3.2 TEST INSTRUMENTS ........................................................................................... 40 4.3.3 TEST PROCEDURE .............................................................................................. 40 4.3.4 DEVIATION FROM TEST STANDARD ...............…

Text truncated - open the document above for the full version.

Report No.: RF140812C13-1 1 of 75 Report Format Version 5.3.0 FCC TEST REPORT (15.407) REPORT NO.: RF140812C13-1 TEST MODEL: C7000BMX SERIES MODEL: C7000BMy-zzzzzz with this note “Where y = X if battery is used, and zzzzzz = a different service provider in the same/different country. FCC ID: PY314100252 RECEIVED: Aug. 12, 2014 TESTED: Sep. 17 to 23, 2014 ISSUED: Dec. 10, 2014 APPLICANT: NETGEAR INC. ADDRESS: 350 East Plumeria Drive, San Jose CA 96134, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of mea…

Text truncated - open the document above for the full version.