PY314200265Arlo Camera

1 Quick Start Guide 2 Welcome Thank you for choosing Arlo. Getting started is easy. 3 What’s Included Base stationBase station power adapter Lithium 123 batteries (number of batteries varies with number of cameras) Ethernet cableMounting screws 100% wireless camera(s) Magnetic wall mounts 4 1 Get the App For the best experience, download the Arlo app for your smartphone by scanning the QR code below or searching for “Arlo” in the app store. http://www.netgear.com/arloapps 5 Connect Your Base Station to the Internet Connect the base station to your router using an Ethernet cable. Connect the AC adapter to your base station and plug it in. 2 6 Turn the base station on by pressing the On-Off button. The power LED and Internet LED on the front of the base station turn green in about two minutes. (If this doesn’t happen, visit http://support.arlo.com for troubleshooting tips.) 7 Get an Account Launch the app from your smartphone and click the New System Setup button. Follow the on-screen instructions. 3 Available AFTER beta Or from a computer, visit https://arlo.netgear.com/ and follow the on-screen instructions. 8 Set Up and Sync Your Cameras Insert batteries • Unlock the battery compartment by sliding and holding the latch. • Slide the battery door back and lift it to open the compartment. • Insert the batteries as shown and close the battery door. 4 9 Sync your cameras with the base station Bring the camera within one to three feet (30 to 100 centimeters) of the base station. 1’ - 3’ 30 cm - 100 cm 10 Press the Sync button on the side of the base station. Wait for the sync status LED to blink green. Press the Sync button on top of the camera. Cameras must be synced one at a time. Sync your cameras with the base station (cont’d) 11 A blue LED on the camera blinks rapidly to confirm sync. The camera is ready for viewing. Note: The LED blinks amber if the sync is not successful. You must repeat the sync process. The camera LED on the base station turns solid green after the camera is synced. Repeat these steps for each camera. Note: If the sync procedure is not completed within 60 seconds, press the Sync button on the base station and try again. 12 Place or Mount Your Cameras Locate a spot for your camera You can place your camera on a shelf or other flat surface, or you can mount it to the wall. 5 Tip: Use the Arlo app in Position mode (found in Camera Settings) to help aim the camera. 13 To mount your camera to the wall: Fasten the mounting screw into the wall, and hang the magnetic mount from the screw. If you’re mounting the camera to drywall, be sure to use the drywall plastic anchors that are provided. Tip: You can also use double-sided tape instead of screws. 14 You’re Done! Congratulations! Your Arlo System is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com or call (US only) 1-888-NETGEAR. 15 Base Station LED Guide Blinking green A firmware update is in progress. DO NOT TURN OFF BASE STATION OR CAMERAS. Green Cameras are connected to the base station. Blinking green The base station is sending data over the Internet. Green The base station is powered on. Blinking green The base station is attempting to sync with a camera. Green The base station is connected to the Internet. Amber The base station is booting up. Off The base station is powered off. Blinking amber A camera is too far from the base station. Signal strength is weak. Off No cameras detected.. Amber The base station is connected to the router but does not have an Internet connection. Off The base station is not connected to your router. PowerCameraInternet Reserved for upcoming features 16 ©2014 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. 350 East Plumeria Drive San Jose, CA 95134, USA October 2014

Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:  Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use.  Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways.  Fuses should only be installed by service personnel.  NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe – EU Declaration of Conformity This section applies to products bearing the CE or CE! mark: Products bearing the CE or CE! mark comply with the following EU directives:  EMC Directive 2004/108/EC  Low Voltage Directive 2006/95/EC  Ecodesign Directive 2009/125/EC  RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:  R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed iformation concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ ) The following paragraphs apply to WN2500RP: This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement): FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:  C6300  GS605v5  WN3000RPv2  D6000  GS608v4  WN3500RP  D6010  HMNC100  WNDR3400v3  D3600  JNR1010v2  WN1000v4  D3610  JR6150  WNR2010  D6200V2  JWNR2000v5  WNR2020  EX2700  JWNR2010v5  WNR614  EX6100  R6050  WNR618  EX6200  R6220  VMB3000  FS205v2  R7500  VMC3010  FS605v4  R8000  VMC3030  GS205v2  STS7000  GS208v2  VEGN2200  GS305  WN370  GS308v2  WN2500RP This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. FCC Guidelines for Human Exposure The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. The following statement applies to this product:  C6300XB3 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 25cm between the radiator and your body. The following statement applies to this product:  R8000 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 30cm between the radiator and your body. FCC Declaration of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that this product complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions:  The device may not cause harmful interference, and  The device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions The NETGEAR product has been tested and found to comply with th…

Text truncated - open the document above for the full version.

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 4088903657 / Fax: 4089078097 Ad Hoc Mode Function Declaration Date: 2014/9/16 FCC ID：PY314200265 To whom it may concern, We, the undersigned, declare that the EUT (Model Name: VMC3010, VMC3030) doesn’t have Ad Hoc function on “non-US/Canada frequencies”. Regards, FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : Name and Job Title : David Kay / Regulatory Compliance Manager E-Mail : [email protected] Tel. : 4088903657

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 4088903160 / Fax: 4089078097 Confidential Letter Date: 2014/8/12 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID：PY314200265 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent NETGEAR, Inc. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.457 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : Name and Job Title : David Kay / Regulatory Compliance Manager E-Mail : [email protected] Tel. : 4088903160

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 4088903160 / Fax: 4089078097 Declaration of label location Letter Date: 2014/8/12 FCC ID：PY314200265 To whom it may concern, We, the undersigned, the label will be put under the battery compartment and it is visible to the users as they purchase the products and install the battery. FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : Name and Job Title : David Kay / Regulatory Compliance Manager E-Mail : [email protected] Tel. : 4088903160

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 4088903657 / Fax: 4089078097 DoC Attestation Letter Date: 2014/9/16 We NETGEAR, Inc., as the grantee of this project (FCC ID: PY314200265 / Brand Name: NETGEAR / Model No.: VMC3010, VMC3030), would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures (Sporton report No.: FD450706-01, FCC Test Firm Registration No.: 187376). The final product shall consequently comply with the FCC rule applied for DoC Procedure. Regards, FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : Name and Job Title : David Kay / Regulatory Compliance Manager E-Mail : [email protected] Tel. : 4088903657

NETGEAR, Inc. 350 East Plumeria Drive, San Jose, California 95134, USA Tel: 4088903657 / Fax: 4089078097 Power of Attorney Date: 2014/9/16 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: NETGEAR / VMC3010, VMC3030 FCC ID: PY314200265 Product name: Arlo camera FCC Grantee contact person information. Applicant’s company name : NETGEAR, Inc. Applicant’s company address : 350 East Plumeria Drive, San Jose, California 95134, USA Signature : Name and Job Title : David Kay / Regulatory Compliance Manager E-Mail : [email protected] Tel. : 4088903657

Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 1 OF 5 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Photographs of EUT EUT (Model Name: VMC3010) Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 2 OF 5 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 3 OF 5 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 EUT (Model Name: VMC3010) Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 4 OF 5 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 5 OF 5 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973

Label: Model: VMC3010 Model: VMC3030 Label Here

Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 1 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Photographs of EUT EUT (Model Name: VMC3010) Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 2 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 3 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 4 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 5 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 6 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 7 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 8 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 9 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 10 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 EUT (Model Name: VMC3010) Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 11 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 12 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 13 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 14 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 15 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 16 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 17 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 18 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 19 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 20 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 21 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 22 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 23 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 24 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 25 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 26 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 27 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 28 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 29 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 30 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 31 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 32 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 33 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 34 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 35 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 36 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 37 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 38 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 39 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973 Report No.:450706-01 SPORTON International Inc. PAGE NUMBER : 40 OF 40 TEL : 886-3-327-3456 ISSUED DATE : Oct. 21, 2014 FAX : 886-3-327-0973

Report No.: FR450706-01 FCC ID: PY314200265 Page No. : B1 of B3 Appendix B. Maximum Permissible Exposure Report No.: FR450706-01 FCC ID: PY314200265 Page No. : B2 of B3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR450706-01 FCC ID: PY314200265 Page No. : B3 of B3 1.3. Calculated Result and Limit Exposure Environment: General Population / Uncontrolled Exposure Antenna Type : Metal Conducted Power for IEEE 802.11b: 19.66 dBm Average Output Power Distance (m) Antenna Gain (dBi) Antenna Gain (numeric) (dBm) (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 0.2 1.35 1.3646 19.6600 92.4698 0.025116 1 Complies

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: Rev. 01 FCC RADIO TEST REPORT Applicant’s company NETGEAR, Inc. Applicant Address 350 East Plumeria Drive, San Jose, California 95134, USA FCC ID PY314200265 Product Name Arlo Camera Brand Name NETGEAR Model No. VMC3010, VMC3030 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Jul. 02, 2014 Final Test Date Oct. 09, 2014 Submission Type Original Equipment Statement Test result included in this report is for the IEEE 802.11n and IEEE 802.11b/g of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2013, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v03r02 and KDB 662911 D01 v02r01. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR450706-01 Report Format Version: Rev. 01 Page No. : i of ii FCC ID: PY314200265 Issued Date : Oct. 21, 2014 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................4 3.3. Table for Filed Antenna.......................................................................................................................................................................5 3.4. Table for Carrier Frequencies .............................................................................................................................................................5 3.5. Table for Test Modes ...........................................................................................................................................................................6 3.6. Table for Testing Locations..................................................................................................................................................................7 3.7. Table for Multiple Listing......................................................................................................................................................................7 3.8. Table for Supporting Units ...................................................................................................................................................................8 3.9. Table for Parameters of Test Software Setting .....................................................................................................................................9 3.10. EUT Operation during Test ...................................................................................................................................................................9 3.11. Duty Cycle ..........................................................................................................................................................................................9 3.12. Test Configurations ...........................................................................................................................................................................10 4. TEST RESULT ................................................................................................................................................... 12 4.1. Maximum Conducted Output Power Measurement .........................................................................................................................12 4.2. Power Spectral Density Measurement ..............................................................................................................................................15 4.3. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................21 4.4. Radiated Emissions Measurement ....................................................................................................................................................26 4.5. Emissions Measurement ....................................................................................................................................................................41 4.6. Antenna Requirements .....................................................................................................................................................................55 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 56 6. MEASUREMENT UNCERTAINTY.......................................................................................................................... 57 APPENDIX A. TEST PHOTOS ........................................................................................................................ A1 ~ A4 APPENDIX B. MAXIMUM PERMISSIBLE EX…

Text truncated - open the document above for the full version.

Report No.: FR450706-01 FCC ID: PY314200265 Page No. : A1 of A4 Appendix A. Test Photos Report No.: FR450706-01 FCC ID: PY314200265 Page No. : A2 of A4 1. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz / Test Mode: Mode 2 FRONT VIEW REAR VIEW Report No.: FR450706-01 FCC ID: PY314200265 Page No. : A3 of A4 Test Configuration: 30MHz~1GHz / Test Mode: Mode 2 FRONT VIEW REAR VIEW Report No.: FR450706-01 FCC ID: PY314200265 Page No. : A4 of A4 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW